FPV Drone Simulator Fix for Windows 10 Update and Frsky Taranis USB Connection
Вставка
- Опубліковано 3 жов 2024
- After a Windows 10 update my FrSky Taranis would no longer work with Velocidrone or AirSim. In the video I cover AirSim, but this fix applies to any FPV drone simulator that supports USB connection with a FrSky TX.
This was a royal pain to figure out, but a shout out to Painless 360 for giving me a kick start in the right direction:
• Fixing FrSky Joystick ...
The key is if you can't rollback your Windows 10 USB driver then you should "update" it to a previous version. Then you should see your Taranis show up in the list of USB gaming controllers.
I hope this saves someone out there a bit of time.
You’re an actual legend! Thank you for keeping me from pulling out my hair 🥲
Which sim are you using?
Velocidrone
@@1bmxdakota Thank you, i was trying it on FPV Simulator from steam but in the game setting, the Transmitter doesn't come up. It is working on windows devices though, i'll have to download Velocidrone then. Thanks again.
Dude, you're a legend! This is the quickest driver fix I've found! Usually its a few hours of dicken around and unsuccessful attempts, but this was super straight forward! I'll be saving this video for the next time this inevitably happens... god damn windows
After a PAAAaaainfuL 2'days of tedious, brain-draining failed attempts@troubleshooting, "Thanks to Your Guidance"_& another sleepless night, I was to finally able to get my transmitter to respond to (Lift'off)my simulator! ..Your explanation was precise & properly worded for translation! .."Thank You Again!!!"
Lol I keep coming back to your video every few months because I keep forgetting the fix. Got way too many controllers on my computer that I use more often than my Taranis on Sims. Such great quick tutorial.
Wow dude hats off...i was trying to do this for more than a month ...your tutorial is awesome and helpful 😁
You saved me. Thank you. I had the greyed out roll back driver. That usb thing did the trick. Thank you for taking the time to make this video so that we can get on with our lives.
Important tip for some perhaps!: make sure in the main menu of taranis, the usb connection mode setting is on joystick.
Mine was for some reason set on storage. Could be that i had set it a year ago when i last had it in my hands, but i dont remember ever having looked at that particular setting before, plus i had windows 7 back then.
This helps me. Thanks😀
Thankyou so much
Thanks a lot, coudln't choose rollback option, worked perfectly with your method. Thanks.
10 STARS!!!!!!!.........Been lost for hours, and your video just SAVED ME!!.....Thank you x10!!
Why does Windows have to be like this? Thank you so much for making this video. The amount of time and frustrating you saved me is massive.
That’s rad, first time I haven’t had the option to roll back. Glad you covered that, 🤞 it works. 🤙
Thank you! I searched for 2h now, and finally i found it!
You're a hero! Saved my sim problems. Thanks dude!
Thanks, this saved me a lot of time! :)
Awesome! You just saved me a lot of time and aggravation, your solution worked great! Thank You!
Thank you lord love you saved my life going into quarintine
I undated to windows 11. Don't understand all the hate. It's pretty good. Anyways it screwed our controller again. I literally just did this two days ago and forgot already. Don't get old. Much appreciated! Again
absolute genious love ya, was searchin for this problem about 5 hours
Thanks a lot! Make sure you use a cable which allows communication between devices!
Wow wish I had found your video sooner. Ty for getting me back up and flying!!
Thank you soooooo much!!!!! This helped! I was going crazy trying to figure it out. So simple and easy to follow too! Thank you!
every time i quit flying for a bit and i come back to flying i have to solve this probem
incase im watching this from the future this was what fixed it last time tyson
Best video about this problem...thank you!!!!
You saved me from giving up! thank you!!!!
Yaaaassss! You're my new favorite human person!
This works for windows 11 update as well! Thank you!👍🤓
Thank you man, you’re a life saver
Thanks so much! Still an issue, Thanksgiving 2021. Appreciate your help and time
Hey bud, thanks allot, I have been trying for 2 Days.
Thanks man, you saved me a ton of troubleshooting.
Nice I finally fix it. Thanks!
thank you so much this really help I was getting really frustrated thank you
I owe you a beer! Thank you so much!
Thank you, got it working :D
You Sir are the best
You just make my day
Thank you sooo much for help and great video👏
AHHHHHH This is what I needed thank you
You saved my day, Thank you so much
Thanks a lot Dennis
Instant subscribe. Thanks so much man!!!!
thank you so much, this help a lot
THANK YOU !!!!!!!!!
I had same problem
Now what if u don’t have that Libusb-win32 driver? That’s my issue right now!! Please help!!
Thank you so much this helped a ton!
My dude thank you
Thank you so much!
Thanks buddy!
good vdo brother
it was really usefull
Thank you bro. it worked
great vid everyone else just does the rollback option ...
Thank you so much!!!
Please help. I cannot get my taranis to show under game controller.
Under Device manager I only get it as a USB input device under "Human Input Device"
I also don;t see any LIB USB
Under "Other Devices" I get FRsky Taranis Seral Port
Under "Ports" I get a USB Serial Device (COM6)
Date 3 May 2022 WIN10
JUST Found my solution :First Make sure your Taranis is in Joystick mode .
To do this go into RADIO SETUP
Scroll down until you see USB Mode and change to JOYSTICK
Thank you very much! I can fly again!
Thanks Bro!
THANK YOU
Все заработало!!! Respect!!!
Thank you
Thank you
Every video i have watched shows the libusb-win32 in the device manager.
My computer only sees my controller as a mass storage device..
Ok so for me there is no libusb device on the device manager at all.. i had the radio working perfectly up till yesterday (havent done anything to it) i can get the driver back through action and adding legacy hardware but then i cannot roll it back and updating it doesnt help... im so confused
huge help
THANK YOU 👍👍👍👍👍👍👍👍👍👍👍👍
Thank you!!
worked on AI drone sim
Thanks :D
i did that some time ago. no its not working again but i dont even see the libusb win32 stuff in the device manager. no idea how to fix it, pc doesnt even do a sound when i connect, tried various cables
genious, thank U !!
Hi ... I am stuck ... when I go to the device manager I don't see the libusb-win32 devices ... my laptop is Dell running windows 10 and everything including drivers is up to date. Any suggestions? Thanks!
i have the jumper tx and my controller also doesnt work, but i dont have the better usb come up under device manager.... any ideas ???
Thanks boss
I don't see that "libusb-win32 devices" under device manager, any ideas why? my Taranis Q x7 is switched on and plugged in. I do see an exclamation mark left of "USB Input Device" under "Human Interface Devices" but it doesn't let me roll back the driver. its geyed out. any suggestions?
man i got the same problem cant seem to find a solution
thanx!!!
hey guys anyone have trouble connecting it these days to win11? once plugged in it doesnt even show Lib-USB in the device manager also no sign of the controller in the control panel.
Mine show up as a storage device. and idk how to fix it
Thank you
If I start velocidrone without the taranis plugged in, and click on quick start, the game starts and is stable. If I start velocidrone with the taranis plugged in and quick start, the video is jumpy, shuddery, basically unplayable because of the jerkiness. Any suggestions? Ever seen something like this. 4 months ago before a bunch of windows 10 updates, this machine ran velocidrone perfectly.
Thanks.
Any idea for a fix for Mac OS?
Hi, we are trying to do image processing with raspberry and control the plane while auto mode by raspberry via mavlink. But we have some serial issues. Did you do that before? Is there anything that we can look? Could you help?
Eu amo vc s2
No Matter what I do, every time I plug in my Taranis I get a "This device is not recognized" from my PC. I have tried getting the Correct driver with no luck. It just says it is unrecognizable. Any Advice?
Damn that sucks -
Milo78 commented below: Make sure you use a cable which allows communication between devices!
I'd try a different cable - yours might be a charging cable with no data connection....
The cable for some reason was the problem. I have plugged the same cable into my computer a million times, but for some reason it just didn't work. After I got a new cable it worked.
Hi, I got following problem: when I plug my QX7 there is no Libusb showing up in the device manager but at the very bottom I got SMT32 Bootloaderas device. If I want to update the driver there, I cant select USB Input device. This is driving me nuts for weeks now, I have to get my SIM running before weather is getting bad ;) thanks for your help in advance
same here, did you find a fix?
@@b-rod1498 hey, I updated my windows to the latest version, since 3 weeks or so it is working continously. I always plug the cable first in the taranis that is powered on, then to the computer. Hope that helps
Bro!!!!!!!!!!
I can't use my X9D switches on my win10 laptop for some reason. The joystick axes work fine, but I can't map switches. Any advice?