So, i noticed the wheels are smaller at the end of the vid. Would love to see a tut vid on that set up for vertically challenged riders(UU1100). Great break down share!
Can you flip one pedal 180 degrees so they are both down? That would work kinda like pegs but still have the bike look and technically still have pedals
Yup you can install the left crank arm on the spindle in the same direction as the right crank arm. A few Onyx RCR riders install their pedals that way.
Pegs usually have slightly different dimensions, the ones I used are big enough to fit the axel and also the sockets for the wrench. If the dimensions match the ones I linked in the video it should be fine.
Zooz UU750: zoozbikes.com/collections/the-ultra-urban/products/uu750?ref=RUNPLAYBACK (use promo code RUNPLAYBACK for $150 off)
Is this universal for all bikes ?
Awesome!
Appreciate you bro! Got my Zooz because your content! 🙏
@@RunPlayBack that's awesome to hear!
So, i noticed the wheels are smaller at the end of the vid. Would love to see a tut vid on that set up for vertically challenged riders(UU1100). Great break down share!
Yes! That's our custom 52v Zooz 18" Minibike build. I'll have the full video breakdown launching this week!
Can you flip one pedal 180 degrees so they are both down? That would work kinda like pegs but still have the bike look and technically still have pedals
Yup you can install the left crank arm on the spindle in the same direction as the right crank arm. A few Onyx RCR riders install their pedals that way.
Also can't seem to find anyway of making contact to get the bayside bikes plug and play pegs
Wil it be legal?
Can you still install pegs without removing the whole chain stuff & just removing the pedals and pedal arms
Not really because the stock bracket caps have bearings and the right sprocket is connected to the right pedal arm.
Hi mate that is a wicked idea, im very interested in doing the same but Could i do this to a standard bmx that im going to covert? Meny thanks
This may be a dumb question but when you take off the chain, can you still use your gears?
Will this work with 100mm bottom bracket?
Would this work on a trek Marlin 6?
Do u need to use the specific name pegs or would any band pegs work
Pegs usually have slightly different dimensions, the ones I used are big enough to fit the axel and also the sockets for the wrench. If the dimensions match the ones I linked in the video it should be fine.
@@RunPlayBackwould merit 4.5 inch pegs work
Is this good with Mihogo NX (Mihogo e-bikes as a whole)?
Does it have to have a bottom bracket
@@dooHeillO to install the pegs? Yeah
@RunPlayBack would this work on a stealth EBike as well?
it should, it's a pretty standard bottom bracket
Can i just use a M14 110mm or 120mm fully threaded bolt with a 14mm nut and the sane amount of washers
Would it work on a AKEZ Jaguar
Would this work on Ekx x21?
Is there a way to keep the chain?
Bro......
Do you know the bottom bracket size?
Length 68mm / Width 38mm
Does this eliminate the Chain??
Yes
Yo can you do this on a normal bike?
@@ekkRides yeah if it has the same bottom bracket it should work
Will this work with an movcan v30?