Це відео не доступне.
Перепрошуємо.
HOW TO Arctic Cat 400 Carb- WONT START or IDLE Clean Repair Rebuild Carburetor Carb Kit 0470-504
Вставка
- Опубліковано 21 лют 2018
- In this video we are disassembling, cleaning and re-assembling a carburetor on a 2004 Arctic Cat Manual 400 4x4.
Carburetor Rebuild Kit Link: www.ebay.com/i...
Cleaner Link: amzn.to/2UUYfrj
Ultrasonic Cleaner Link: amzn.to/37DDs0p
Flywheel Kit: amzn.to/2ISJmD8
Belt: amzn.to/2J1sDgB
Carb Kit: amzn.to/39aF3h1
Battery: amzn.to/3lUc197
Tires: amzn.to/3nFcj46
Oil Filter: amzn.to/3nFcj46
Feeler Gauge: amzn.to/36UsROK
Also more common repairs with the ATV check out:
• How To - Yamaha Warrio...
• Video 1 of 2 Yamaha Wa...
• HOW TO - Remove & Repl...
Mid Nebraska Motorsports YT
PO Box 23
Central City, NE 68826
VENMO is: @midnemotorsports
Check out my eBay store at stores.ebay.com/midnebraskamotorsports
Shop for parts at: midnebraskamotorsports.com
Instagram / midnebraskamotorsports
Patreon / midnebraskamotorsports
Facebook: / midnebraskamotorsports
By far, the best DIY video on carb mechanics that I have watched. Not sure my issue with black spark plug is related but really enjoyed, and will save, this video. Thank you!
Awesome detailed video sir! I have a 300, but my carb is identical. I went ahead and bought a new carb (only $15 more than a rebuild kit) and am going to calibrate it to your specs when I do the install this weekend. Not a motor head, just a DIYer trying to get a used toy ready for my son and your specifics will be a great help. Very grateful you took the time to do this for everyone.
-Joe
Happy to help. Let us know if you need anything. ebay.com/str/midnebraskamotorsports
Don’t by them cheap carbs just clean your old one.
@@cinema_yo It’s worked out good up to this point. I did keep the old one though. But really, there is very little variance that I could see in the two…
Thank you very much. Loved your quick informative video. Very helpful. 2005 Artic cat 400 4x4 auto sitting 4 or 5 years. Only has 24 hours on it. Just started cleaning.
Happy to help. Let us know if you need anything. ebay.com/str/midnebraskamotorsports
I love the how to videos and the way they answer most of their replies. This doesn't happen on most channels. Great work!
Same carb on my 08 500. Thanks for the vid. Bike was running kinda bad Friday, wouldn't start Monday day. Watched this then took mine apart and cleaned with compressed air and carb cleaner, runs better than ever now. Had tiny pieces of the old air filter that was coming apart clogging jets/ports.
Thanks for taking the time to make a video of this, much appreciated.
Excellent content thank you very much.
Glad to hear! Hope you can find more helpful videos on our channel! ua-cam.com/users/MidNebraskaMotorsports
this is the most useful video on youtube, thank you🙏
Great Video, thank you 👍
Thanks! If you need parts or tools for the job check us out at www.midnebraskamotorsports.com/
Great tutorial, well done! Thank you very much!
Hey can’t tell you enough how much this video helped me out
Great job explaining + details!
Happy to help. Let us know if you need anything. ebay.com/str/midnebraskamotorsports
Stellar job. On the bowl, there is a overflow nipple, where do you attach a hose to it and where does the other end of the hose goes to?
Hose is attached to the nipple on the bowl. The other end runs down your crankcase and just dangles there so any drips of fuel ends up on the ground (or evaporating before it gets to the ground) Thanks for watching and the comment. Hit that subscribe button, if you will. www.ebay.com/str/midnebraskamotorsports
Great video! The carb on a 2016 Alterra 400 is identical, except the air fuel screw cannot be adjusted, it has no screw head and appears factory sealed. My problem is the carb leaks out the overflow about once a month over the spring-summer-fall when it is used but I cannot figure out why as everything is clean (I have also installed an aftermarket fuel filter on the fuel line from tank to carb) and it leaked 2 days after installing a carb kit. I take it apart, clean everything, put it back together and its good for a while, then it overflows again, and I repeat the process. Sadly, your video didn't help solve my problem, but it is an excellent video.
Hey, my 16 400 alterra starting leaking out of the carb overflow as well, pretty sure this is the first time.
I haven't taken carb apart yet, wondering if you were able to figure yours out?
Thanks
@@kristianturner131 Sorry, I can't confirm I have solved the problem as I put the quad away for the winter in November 2022, but it hadn't leaked for a while before I put it away. I dumped the fuel tank and cleaned it out to ensure no debris inside, changed the fuel hose in case it was deteriorating, put a better in line fuel filter on the fuel hose (I had been using one for a lawn mower that was 40 micron but got one at 10 micron) and put a new float valve that I got from the arctic cat dealer and not from a generic carb kit. The quad seemed to run better and it didn't leak for weeks where it had been leaking after a week or so after cleaning it previously. I'll see what happens in the coming spring to fall when it gets used again.
Great video, you pretty much covered it. Thank you.
Thanks so much for your video, it helped me a lot
Great video
I think this just helped what I did wrong. The other only video I found the guy didn't know what he was talking about. You are very knowledgeable with it. Thank you
This carb looks very similar to the carb on my 2008 Suzuki King Quad 400 (LTF400F). Might be the same carb.
It very well might be. Arctic cat and Suzuki used some of the same motor / intake parts for several years. Thanks for watching and the comment. Have you watched some of our other videos on this same model? Also if you have need parts check out: www.ebay.com/str/midnebraskamotorsports
I have an 01 400 and I'm about to take mine apart hopefully this saves me 100 dollars granted whoever put this thing together put rtv on the diaphragm lid so that's going to be real fun
Great video! In regards to the jets, which one is responsible for rich/lean at idle? Quad seems to start, run and accelerate fine. But I have a little smoke and raw fuel smell when it’s idling. Or could it be the air fuel screw? Thanks!
loved the vid. Question for you, i disassembled it as to your video. after putting back everything i reached into the end hole and lifted the plunger. it seemed to work perfect' problemis i see the
Nice video! How do you take the choke cable off?
I have an 02 or 03 400 MT. We bought it as a leftover but since new, the quad never would idle during winter. We would need to run it hard for a few minutes to prevent stalling out. Do you think I should replace the pilot jet with something different?
Same carb for a 2002 Arctic Cat 375 Automatic
Question or statement! Thanks for the comment and for watching. Let us know if you have an questions! Let us know if you need parts: www.ebay.com/str/midnebraskamotorsports
Very good video. My carb does not have a hose on the over flow on the bowl. When I get one how long and where does it connect on the other end to? Mine has a slight leak from the nipple, maybe because there is no hose.
Thx man sure was helpful
I just followed your video step by step Thanks for this video. My issue is with the PILOT JET. I can not see through it and can not get any wire through it. Even micro sized wire. Should I be able to see through this jet?
Yes, if you can't see through it at then your atv won't idle /run correctly. You can replace it. Most dealerships will have a jet for a couple bucks just make sure it is the correct size OR send it here and I will free it up! Let me now. The pilots can be frustrating. Thanks for watching.
Don't forget taking the carb out and having to take all the plastic off the bike if it's the 06 love arctic cat for that one
U are the man!!!
Hi I have a 2015 arctic cat 400 I clean carburetor twice and I did a pressure test the the needle and seat and no leaks I put it back to get best kind after just seat there it will leak gas out of the overflow on bottom of carburetor I been at small engine a long while this one got me stumped
Hello there, my son just bought a 1999 Arctic Cat 400 4x4 ATV and it runs real rich, also leaks fuel into the crankcase after it sits. When running it gets so rich it coats the spark plug with black ash so bad it won’t start anymore. It is missing the over flow needle and throttle linkage cover plate. It has a black plastic/foam material float. The throttle cable connection area is a lil different in design. I did adjust the float so it would close sooner however it still doesn’t seem to close at all. Please help if you can. Thanks, great video!
have a 2006 650 H1, hard starting when cold , starts fine afterwards , not the smoothest running and pops a bit from muffler when letting off the throttle
also stalls a lot at idle or engine brake down hills , thinking carb clean but not sure , just bought it 3-18 and was running fine , plug , oil , and filter and belt replaced just prior to purchase , thanks and I subscribed
@@MidNebraskaMotorsports No O-ring and washer on that air fuel screw?
Thank you for this
THANKS
Excellent video. I am just curious is the carb on a 2004 arctic cat ATV a Keihin CVK34? I've gotten some conflicting information about whether its a Keihin CVK34 or a Keihin CVK32.
Great Video. I have an 2004 Eiger 400, same carb I assume. should the float be level ?
Sorry if this is a dumb question, but my Dad is wondering what the carb settings are for a 1999 Arctic Cat 400 4x4. Any idea where I could find this out?
Check our channel. You should find a video of that exact model. Thanks for the comment and for watching. Let us know if you need anything! www.ebay.com/str/midnebraskamotorsports
I just bought a 2008 arctic cat 366 4x4. Its in excellent shape but not running. Got it cheap. I put a new carb on and adjusted valves. There is no fuel getting to spark plug. What would be the problem? Low compression due to rings? Stuck valves? And what is the other hose input an side of carb. Not fuel line, not bottom drain, the other one? Great video BTW
@@MidNebraskaMotorsports thanks for reply. Motor turns fine. Has spark. Ill check that video next. Thanks
I have an Artic cat 400 that's been sitting for a couple of years because it quit running. I finally bought a new carb and it will start but instantly goes dead and then won't fire again until I let it sit for a few minutes. Any ideas?
Any idea why my 02 arctic cat 400 bog after around 20 percent throttle. I have cleaned the carb and have tried a Chinese carb it acts the same. If i cover the snorkel some it runs fine. Acts like its lean but the plugs black. Any ideas?
Hi, great vid! Looking for a kit for 2015 Artic Cat 400 & 500. Do you have?
Sure do. Let us know if you are still needing one. Contact information is on our website. Thanks for watching. Let us know if there is anything else you need! www.midnebraskamotorsports.com/
@@MidNebraskaMotorsports ok very good. What about for a 2015 Artic Cat
www.midnebraskamotorsports.com/
I have the 1999 300, only idles with choke on, will run mid and full throttle with out choke but sputter. Runs perfectly with full choke all rpm. Any suggestions on what to clean?
Hi I just installed a new aftermarket carb on my 366, Runs fine, Idle is fine. While I am driving along if I give it full Throttle it seems like it starts to bog, if I ez into it I can get to full speed, with no bog. Do you think I need to adjust the air screw in 1/4 turn? Or out? Thanks
Why is gas running out of the bottom of the carborator? I had this happen last year. I took the 2001 panther 440 to a small engine shop to get fix last year, I only put on 70 miles, and gas is running straight through the overflow again on the bottom side of the carborator.
Your needle/ seat is bad or stuck open. There is a chance it is your float, but typically these don’t go bad. My guess is, when they re-installed your carb, When they put the fuel line back on, it broke a piece of fuel line off and it ran into the needle area and was lodged. Allowing fuel to flow freely. Thanks for watching. Let us know if that works!
I just got a new carb and it's smoking really bad put the old carb back on put gas the the back it runs fine and no smoke any help would be appreciated
So my son has a 250 cat and we are doing his carb my only question is the air screw -he took it out without checking how many turns i see yours was 2-1/2 turns out , is there someplace where i can find the spec for the 250 ? Or is 2-1/2 turns the same on all of them thanks
I just bought a 2004 Arctic Cat 300 4x4 & on my carburetor there’s a small gap because of a bolt missing and air is able to get through where that lever is around 19 seconds into your video..can that be the cause of my Arctic Cat shutting off after I make a stop?
I have an 04 articcat fis 4x4 manual getting spark got the timing set flywheel magnets are in place and woodruff key is good even sprayed starting fluid in and cannot get it to start any ideas on the issue or maybe sensors that could keep it from starting? Any help would be appriciated
Can you explain how to do a carburetor slide mod by drilling the 1/8” hole? And when this is done, should there 3 or 4 coils cut off the spring? Can a needle shim be put in this carb? If so, does the main jet need to be changed?
Thanks for the reply, but you didn’t answer any of the questions.
The video is great and you explained everything very well but none of the questions were answered???
I just got a Arctic Cat 400 to fix a no spark issue. After getting spark I had to clean the carb for the machine to start. Now it will start but I have to play with the throttle and it is running terribly. Black smoke coming out of tail pipe. What did I do wrong?
@@MidNebraskaMotorsports The owner put the updated flywheel and stator kit on the machine before bringing it to me to find what else was wrong. I diagnosed a CDI problem and changed that, fixes their wiring issues and was able to get spark.
I cleaned the carb, changed the fuel in the tank, found that the electric choke was busted fixed that. Then I put a new spark plug in it and it still runs bad. One thing I did notice was when I pull the power wire off of the coil it sparks really bad?
Also I have the push button/starter switch off of the machine due to corroded wires. I am waiting for new one to arrive. Right now I am jumping wires in the harness to get it to start, I wonder if that is causing some of this? Sorry this is so long. By the way I subscribed to your channel. Thank you for your time.
i just realized mines missing that keeper for the needle wonder what ever happened to it smh
continuation: (part 2 of the question) i see the bottom of the needle comes completly out of the hole. as if the needle gets rased to high, any suggestions?
oh boy. Too short of needle? Did you replace the needle? You definitely don't want it coming all the way out of the hole. Did the needle spacers get put in the correct position? Thanks for watching. Let me know what you find!
@@MidNebraskaMotorsports thnk you so much for your reply. i myself did not change the needle. we bought it when it was just 2 years old so i am assuming it is the original needle. i will say it is a 250cc. Your vid was the closest we could find and the carb you used was almost (if not completely) identical. I am gonna pull it off and take it apart again. needle spacers? i know we had a spring and plastic insert. We watched your video step by step, thought i did it right only to have it pop when idling and hardly any power. also very wet and black plug.
have a 2002 articat 400. been nothing but prablems with fuel leak. on carb . this carb looks diffrent .
i have a person who messy with this stuff . im not familar with these . i can do carb on tractor .lol. i took the carb off myself. took the bowl off . i took the seat out and was a small o ring on the seat that was bad . matched one up . i put it together and. hooked up fuel to it other than the wheeler for two days no leaks . i put it back on the. wheeler no leak for a whole day . now i think its coming from the small primer on the cab . we previously put a new one on the carb it is still on wheeler .
@@MidNebraskaMotorsports what is your full email to send pictures?
My arctic cat 400 been sitting for years rebuilt the carb now it runs terrible spitting gas in the air box. What could it be ?
@@MidNebraskaMotorsports thanks for the reply. I figured it out. The accelerator pump was upside down but now it leaks gas out of the overflow
Hey quick question is this carb the same as a 2006 dvx400 ? Going to pull mine tomorrow and clean it just curious?
Its a Suzuki engine, same one used in the Eiger and I think the Kingquad, if its te 400 version. Good engine.
hi,i cleaned all the jets like u did on video ,,my arctic cat,,ran great rode for bout 30 minutes,,turned it off,,,started it an hour later,,back to same problem idle great,,would not take any gas above idle,,im at a loss...help lol
i put on new gas line and a filter,,cleaned the jets again ,,and put new spark plug in,,still will not take gas,,,but if i let it idle for like 30 to 40 minutes then it will take gas and run great,,im at a loss again@@MidNebraskaMotorsports
You have a dirty fuel system, starting at the fuel tank- peacock- filter-carb. All has to be cleaned!
any idea why is there an accelerator pump on these carbs since it isnt hooked up?
My only guess was a “cold aid start” in brutal conditions even though cold fuel wants to stay in liquid form but still it’s a pump shot to the Venturi
Ehat is the point of the diagphram? Seems like an unnecessarily overcomplicated carb
Had to drill my pilot jet out, do yall know where I can order or get another one from
Motosport.com
I turn m gas on and I’m pissing gas from the bottom of the carb plzz help