Error code E-35

Поділитися
Вставка
  • Опубліковано 7 лют 2025
  • E-35 ( LPG fuel injector open circuit malfuntion ) Engine can not start. Check fuse on main LPG injector open 5A. or Resistance LPG main injector approx : 1Ω at room temperature.

КОМЕНТАРІ • 18

  • @drcdrdoct9864
    @drcdrdoct9864 2 роки тому +1

    Oh my. You saved me time and cost. I had E35 and would start and die in 10 seconds. I did what you said here (even though I don't understand Thai) and it works great now. Thank you so very much!

  • @sawomirsitek4748
    @sawomirsitek4748 2 роки тому

    Wózek widłowy gabelstapler forklift NISSAN K40 trouble codes E35 E-35 wymiana bezpiecznika pomogła w naszym przypadku. Dziekujemy autorowi filmu

  • @hasyaivanova9245
    @hasyaivanova9245 Рік тому

    Good evening, how can I find out what my password is on the loader to enter the menu. I also get error E35, the loader works for 10-20 seconds and then stalls.

    • @unicarriersservicesupportt8796
      @unicarriersservicesupportt8796  Рік тому +1

      Normally, the default password is 0312.

    • @hasyaivanova9245
      @hasyaivanova9245 Рік тому +1

      @@unicarriersservicesupportt8796 Thank you very much for your help and for the video, I made it as in the video and everything worked, the loader is working fine. Your information is very useful, I myself am from Ukraine, and here in the Russian-speaking space there is very little information on Nissan loaders, and when there is even a small problem with a loader, it is very difficult to eliminate it due to lack of information. Thanks again for all your hard work and videos.

    • @unicarriersservicesupportt8796
      @unicarriersservicesupportt8796  Рік тому

      Thank you.

    • @IconIt445
      @IconIt445 2 місяці тому

      E27เป็นเซนเชอร์ตัวใหนเสีย

  • @ต้นกล้าชูเกียรติ

    โค้ดE40 มิตรซูแกรนเดีย หมุนพวงมาลัยล้อไม่หมุนตาม อะไรเสียครับ ขอบคุณ

    • @unicarriersservicesupportt8796
      @unicarriersservicesupportt8796  Рік тому

      Oil pressure sensor diagnostic result signal .
      มีระบบปรับตั้งเสาตรงอัตโนมัติใช่ไหมครับ?
      ถ้าใช่ให้เช็คสวิทช์แรงดันน้ำมันไฮดรอลิกที่คอนโทรนวาล์ว
      - เช็ค Voltae power supply = 5 v.
      - เช็ค Voltage out put = 0.25 - 4 v.

  • @ทรงพลทรวงโพธิ์

    หน้าจอตัวใหม่เช็คยังไงครับ