How to re-fill ink for the Epson Workfoce WF-7820 and 7840

Поділитися
Вставка
  • Опубліковано 11 жов 2024

КОМЕНТАРІ • 191

  • @leoandmckenzie2905
    @leoandmckenzie2905 3 роки тому +5

    Omg 😳 I thought this was going to be extremely hard but you made it so easy!!!! Thanks so much!!!!

  • @benbenhomeandlifestyle5122
    @benbenhomeandlifestyle5122 Рік тому +2

    Can you use that one set of chips forever? I mean, for as long as you refill the cartridges well before they run out, are they going to last forever without changing the chips?

  • @xNintendoGirlx
    @xNintendoGirlx 3 роки тому +4

    Very informative and great editing on this vid!

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Thank you, NintendoGirl. I can't take the credit for the great video editing. I have an amazing video editor.

    • @truediva5017
      @truediva5017 3 роки тому

      I’m your opinion is that a good sub printer

  • @elizabethkegebein3820
    @elizabethkegebein3820 3 роки тому +2

    Is it possible to leave the cartridge in the printer and add more ink? Will it continue to print and just have the "replace ink" message, or will it stop printing?

  • @patrickcito27
    @patrickcito27 3 роки тому +1

    Thank you brother, so hard to find info about this.
    This was very helpful!!!!

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      You're welcome. Glad it was helpful!

  • @poisonoverdose1
    @poisonoverdose1 6 місяців тому +1

    I though the chip was independent of how much ink was in the cartridge. Therefore, how do you hack the chip over and over? I'd hate to think you had to purchase new Epson cartridges, every time you wanted to refill the refillable ones. Please explain. Thanks so much!

    • @LeeLeesCraft
      @LeeLeesCraft  3 місяці тому

      You would indeed need to purchase new cartridges each time the ink runs out if you continue using traditional Epson cartridges. Given this inconvenience and ongoing expense, I would recommend considering a different type of printer. One good alternative is the Epson EcoTank ET-15000, which features large, easily refillable ink tanks instead of traditional cartridges. This model significantly reduces the hassle and cost of constant cartridge replacement, making it a more convenient and economical choice.

  • @carbotradingcompany4794
    @carbotradingcompany4794 2 місяці тому

    So everytime you change the cartridges out, you have to buy a new set of epson ink too in order to get the chips??

  • @soundboxstudio4395
    @soundboxstudio4395 3 роки тому +3

    Question? Do I need to purchase new 812 cartridges/chips each time I want to fill up an empty refillable cartridge?

  • @apostlejothernsmithprophet7115
    @apostlejothernsmithprophet7115 3 роки тому +1

    I have a 3 part question: Do you need a new chip for every time you use a new cartridge or do you use the same chip but new cartridge or refill the same cartridge with the same chip.

  • @veeisher
    @veeisher 3 роки тому +1

    So, every time you refill your ink cartridges you have to change the little square sensors?

  • @feliprea5504
    @feliprea5504 3 роки тому +1

    l Learned how to do that, But is there a way to refill the same cartridges after the printer thinks they are empty or are we out of luck and have to buy new ones for the chip? Thank you.

    • @fiudad
      @fiudad Місяць тому

      Did u find out?

  • @TheBosslady05
    @TheBosslady05 3 роки тому +2

    Hi. Thanks for the video. Am I able to print regularly with the sub ink? Am I able to switch back n forth from my refillable ink to factory cartridges?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Shaolin, yes you can. However, you would need two sets of cartridges and chips. Probably not recommended until a chipless driver or reset chips come out for that printer. You'll end up spending a lot of money on just the chips by doing that.

  • @cungtingpaw756
    @cungtingpaw756 3 роки тому +1

    Awesome thanks. Where can I get these empty cartridge? I got epson7830 printer. Is the size of the cartridge same ?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi The Epson 7830 is the same as the 7820/7840. I believe the 7830 is just the model that Epson sells in Australia. They all use the same ink 812 Black, 812 Cyan, 812 Magenta, 812 Yellow. I order my empty cartridges from here: www.dynamitegorilla.com/product-page/802xl-refillable-cartridge-set-no-chips

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      It looks like they have sold out. Here is a seller on eBay that has them available. ebay.us/4QSzPa

  • @EnchantingEmbelishments
    @EnchantingEmbelishments 3 роки тому +2

    so, I just bought the WF-7820 this week and just got my refillable cartridges from Dynamite Gorilla, I did everything exactly in the video (except for I didn't wear gloves when swapping out the cartridges) my refillable cartridges registered fine in the printer, but none of the cartridges are printing ink, maybe a tiny bit comes out and so far I have done about 10 print head cleanings with no luck. Do you know what else could be done? or what else I could try? or what I might have done wrong?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Jasmine, sorry to hear about the issues that you are having. Please send me an email to leeleescraftstore@gmail.com with pictures of your cartridges. I'll see if I can help you.

    • @rasheedaheyward6027
      @rasheedaheyward6027 3 роки тому

      @@LeeLeesCraft hi the same thing is happening with my wf 7840. ive done multiple printhead cleanings, Purge files(they were for my old wf 7210, idk if that works), and i took them out and took all the ink out if them and started over and still nothing but alittle magnenta. now all my catridges are saying low. smh can i email you as well abt this issue?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому

      @@rasheedaheyward6027 Sure, you can email me at leeleescraftstore@gmail.com

  • @CaitlynObrien-e3c
    @CaitlynObrien-e3c 11 місяців тому

    Do u remove any of the rubber stoppers on the cartridges?? I just bought this printer and filled the ink cartridges and now the printer wont print any ink. No errors from the chip change so in wondering if i need to remove the little stopper so the ink can flow (if that makes sense lol)

  • @damarrmitchell7203
    @damarrmitchell7203 2 роки тому

    I’ve watched your vid and it worked for me but I have a question that has 3 structures…
    What if I want to use the original ink cartridges that I took the chips off? Can I just put back the correct chip and do normal prints? Or I have to buy new original cartridges and not convert to sublimation to do normal prints?

  • @elizabethstratton6173
    @elizabethstratton6173 3 роки тому +2

    They sell remanufactured 812 cartridges on Amazon. Does that mean the company’s are resetting chips or do they use new chips? I wonder if they would just sell chips and not the filled cartridges.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      I'm not sure, i will try reaching out to a couple sellers and ask.

    • @fiudad
      @fiudad Місяць тому

      ​@@LeeLeesCraftany news?

  • @gibsonmotors2995
    @gibsonmotors2995 3 роки тому +3

    Hi Lee I've been learning from you, I have a question I'm hoping you know the answer to. I have the epson wf 7840, I've already converted according to you instructions. It worked perfectly. However I ran out of ink and had to buy new cartridges, I followed the same steps but now it says it won't recognize one of my cartridges, please help ty😊

  • @davedust5226
    @davedust5226 3 роки тому

    Hello, ty for sharing. I followed the steps u provided with the same empty cartridges u have. But when I replaced the chip on to the new cartridge my Epson WF 7820 will not read the chips. What am I doing wrong?

  • @cynthiahumphrey8491
    @cynthiahumphrey8491 3 роки тому +2

    Now I'm getting doesn't recognize cartridge..I took them out several times and put them back in, even turned it off for a few minutes still same message. What do I need to do? Thank you

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      If you still have the original Epson cartridges, take the chips off the refillable cartridges and place them back on the original ink. See if you still get the same error message with those cartridges.

    • @cynthiahumphrey8491
      @cynthiahumphrey8491 3 роки тому +1

      @@LeeLeesCraft will try, thanks

  • @luisamedina1
    @luisamedina1 Рік тому

    Do you put that ink back again into the cartridge, after you bleed the air out?

  • @Khaos_with_Kyns
    @Khaos_with_Kyns 3 роки тому +1

    What size refillable cartridges are you using? I bought a 7840 BUT purchased refillable cartridges for the 7820 on accident. The size is different and it didn’t seem like it would fit in the printer.
    What kind of refillable cartridges should I buy?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Kristen, that is interesting because the 7840 and the 7820 are the same printer. The 7840 just holds more paper. They both use the same ink cartridges. I order my empty cartridges from here: www.dynamitegorilla.com/product-page/802xl-refillable-cartridge-set-no-chips
      If you scroll down you will see that the cartridge fits both of those printers.

  • @six-figures7080
    @six-figures7080 3 роки тому

    Thanks for teaching on how to do this change.👍

  • @natsc1658
    @natsc1658 3 роки тому +2

    Hi Lee, I followed your steps for the initial set-up and installed the cartridges but the printer isn't seeing the black cartridge, any suggestions on what to do to get it to work?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +3

      Hi Natalie, here are some steps that you can try to resolve that issue. Take the Black ink cartridge out of the printer, shut the printer off, disconnect it from the power, press and hold the on button for about 10 seconds and let go. Reconnect the power and turn it back on. After the printer finishes loading, try the black ink again.

    • @rtobis64
      @rtobis64 3 роки тому

      @@LeeLeesCraft hi I did this for yellow and printer still won’t recgonize the yellow cartridge what should I do all other colors are working

    • @natsc1658
      @natsc1658 3 роки тому +2

      @@rtobis64 hi, I ended up purchasing a new black and it worked. For some reason, and it may happen to you I decided to run the initialisation before removing the chip, in case it didn’t work and I’d have paid for this new cartridge. It ran the initialisation and once successful I removed the chip and put on the blank, then ran the test pages. So far so good! One thing though remember to shake the original cartridge before inserting, I forgot to do that and so while the printer recognised it as the original cartridge it immediately said low ink, and once it read it on that chip I couldn’t get it to change

  • @damarrmitchell7203
    @damarrmitchell7203 2 роки тому

    I have like 5 sets of original cartridges because I’m specialized in mostly sublimation printing, so I wanna know if I can use them.

  • @AromaFrank
    @AromaFrank 3 роки тому +1

    Hi. Thanks for ur help. I would like to hear ur opinion between this printer vs the et-4760, which one to buy? I don’t need large printings..

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Oh, if you don't need large printings, without hesitation go with the et-4760. However, for the price of the et-4760 ($499) go with the SureColor F170 ($399). Its Epson sublimation printer. Start sublimating right out the box.

    • @AromaFrank
      @AromaFrank 3 роки тому +1

      @@LeeLeesCraft Thanks for the quick response. How about between the f-170 vs st-4000? Same price with the st-4000 being an all in one..

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      No problem. The only reason I would say the st-4000 is because of the scanner. If its the only scanner that you have then that'll be useful. However, if you had another available scanner than i would say the f-170.

    • @AromaFrank
      @AromaFrank 3 роки тому

      @@LeeLeesCraft So what exactly is better in the f-170? What means Sublimation printer?

  • @millzdamessenger7621
    @millzdamessenger7621 3 роки тому +1

    ? Once u get the ink in do u have to have a Mac or can u use a table from another brand

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      You don't need to have a Mac. So you should be able to use a tablet. Is its Windows based it would probably work better so you can download the Epson driver.

  • @lor867
    @lor867 3 роки тому +1

    Hello. I just purchased a 7820 am I able to use as a regular printer before converting? Can I remove the original ink cartridges before I completely use them? The empty ink cartridges I purchased, from Etsy, already came with chips for the 6820. So I don’t need to chips from these ink cartridges.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Lory, i would test the cartridges that you purchased that came with the chips to make sure that they work on the 7820. If the chips on those cartridges work then yes you would be able to use it as a regular printer first since you won't be needing the chips off those original cartridges. After you test the cartridges can you let me know how they work out?

  • @athenaspeakswisdom887
    @athenaspeakswisdom887 3 роки тому +1

    Thank for this video. I forgot to remove the air vent nozzles and now it wont print do you have any suggestions

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Do you have the original inks? Try putting the chips back on the ink and try printing. See if that works. You can email me at leeleescraftstore@gmail.com

    • @athenaspeakswisdom887
      @athenaspeakswisdom887 3 роки тому +1

      @@LeeLeesCraft worked like a charm. Thank you!!!

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      You're welcome.

  • @JORGINHODONASCIMENTO
    @JORGINHODONASCIMENTO 2 роки тому

    Great video, thank you. SO you only refill ink on the cartridges after they're installed or do you have to take them out again and again or install new ones all the time?

    • @helenathaggard3247
      @helenathaggard3247 2 роки тому

      EVERY TIME I ORDER CARTRIDGE THEY SENDING THE WRONG SIZE SO REORDER 812XL NOW DO I need to still use this of ink or are sublimation need to be pull out this?new cartridge

  • @quantinanorman4123
    @quantinanorman4123 3 роки тому +1

    Hi. Do you have to keep changing the chips every time your printer reads empty? If so, is there a chip resetter that you would recommend? If not, does this mean that I would need to buy new ink cartridges and take the chips off of them every time? Please advise. Your video worked for me with no issues. I just refilled the cartridges though and the printer still says it’s empty...! Let me know. Thanks. Have a blessed day.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +4

      Hi Quantina, Yes, for now you would have to keep changing chips every time the printer says that the cartridge is empty. Unfortunately there isn't a chip resetter for these chips at the moment or chipless driver for that printer. There are several companies working on both.

    • @quantinanorman4123
      @quantinanorman4123 3 роки тому +2

      Thank you so much for replying so quickly. I appreciate all your help. I ordered from your site link on this video for the sublimation ink and black cartridges about a month or so ago. Great quality. Thank you very much. Hope they make a chip resetter for these. Thanks again. Take care.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      You're welcome. Let me know if there is anything you would like for me to show on a future video.

    • @wh0tube
      @wh0tube 2 роки тому +3

      I’m guessing no chip resetten coming for these? ☹️

  • @nishahorne5845
    @nishahorne5845 3 роки тому +1

    Hi! Do I have to change all cartridges at the same time? Currently my black ink is empty so I bought an original cartridge and swapped the chip but the replacement won’t read.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      No, you should only need to change the empty cartridge. Have you had any luck getting it to read the new chip?

  • @DiamondDonDivaLeci
    @DiamondDonDivaLeci 3 роки тому

    I converted my printer this morning and it said the Cyan ink cartridge wasn't able to be recognized. I went to the store to buy another one and that chip doesn't seem to be working either. Do you know why it may not be working? Thank you.

  • @EasterlyArt
    @EasterlyArt 3 роки тому +1

    For the sake of asking, are the scanning beds on these printers 12 x 18?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      For the WF-7820/7840 Maximum Scan Area Flatbed: 11 x 17

    • @EasterlyArt
      @EasterlyArt 3 роки тому +1

      @@LeeLeesCraft Thank you! I've been on the hunt for a new printer, and I think I can finally invest in one of these.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Just a heads up, if you are planning on printing large prints without a print-less driver or chip reset for that printer, replacing the chips can get expensive.

    • @EasterlyArt
      @EasterlyArt 3 роки тому +1

      @@LeeLeesCraft This is something I've been meaning to research. It's good to know that refillable ink is an option, but I was worried that with every refill you would need to put in new chips and but a whole new set of ink.

  • @servolution8429
    @servolution8429 3 роки тому +1

    Does the chip have to be changed each time the cartridge is refilled

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Unfortunately, for now it does have to be changed each time.

  • @jessjjac
    @jessjjac 3 роки тому +1

    I have the 7820 and I bought the refillable ink and cartridges, after switching out the chips and I use all the ink, can I just fill the cartridges back up and still use the same chips?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Unfortunately no, You would need new chips.

  • @876inc
    @876inc 3 роки тому

    Do I have to buy new epson cartridges everytime I want to refill the ink?

  • @fiudad
    @fiudad Місяць тому

    Does it still work in 2024? I plan to buy it but hope there isn't an update that blocked it!

  • @denisej.527
    @denisej.527 3 роки тому

    What about refillable cartridges with chips, how do they work?

  • @joshyjosh214
    @joshyjosh214 3 роки тому

    I replaced the chips but now it is saying initial cartridge detected what do i do

  • @martinvalenzuela1976
    @martinvalenzuela1976 3 роки тому +1

    I`ve noticed you`ve taken off the chips off new cartages. Do they have to be new? Can you do that with old Cartages?

  • @tychemamitchell1737
    @tychemamitchell1737 2 роки тому +3

    Good morning I have the wf7840 and this is my second time changing the chips. Now the printer isn't recognizing the cartridge do anyone know how to fix this?

    • @aejacobs101
      @aejacobs101 5 місяців тому

      I have the same problem.

    • @aejacobs101
      @aejacobs101 5 місяців тому +1

      I replaced all the cartridges and it doesn’t recognize any of them.

    • @fiudad
      @fiudad Місяць тому

      ​@aejacobs101 did u find a fix?

  • @mikesebooks
    @mikesebooks 3 роки тому

    Hi there... After you convert the wf-7840 to sublimation, is it possible to switch back to regular dye cartridges if you clean the printhead or buy a spare printhead so you can have one for dye ink and one for sublimation?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Mike, yes you can switch back to regular. You should just be able to clean the printhead and use regular Epson ink.

    • @mikesebooks
      @mikesebooks 3 роки тому +1

      @@LeeLeesCraft Thanks Lee... that's all I needed to know, because I primarily need the large format standard printing, but the dye-sub looks pretty awesome too.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому

      You're welcome

  • @nataliev.l3351
    @nataliev.l3351 3 роки тому +1

    Can you do this for pigment ink instead of sublimation ink? So that it is refillable?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Yes, it would be the same process.

  • @catherinewalker5039
    @catherinewalker5039 Рік тому

    I bought the Epson 7840 and followed conversion directions. When I print nothing is printing on the paper. What did I not do.

  • @christinarebold1962
    @christinarebold1962 3 роки тому +1

    I made my first print onto 11x17 and it left a large white stripe down the center of the paper where it didn't print anything. The part of the design on the right and left side printed nice. Any idea why the entire design wouldn't print?

  • @kenalovesglam2493
    @kenalovesglam2493 3 роки тому +1

    Hello I’m having issues with my printer reading my black ink. It keeps saying my ink is low but I have plenty of black in my cartridge. Any suggestions?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Kena, chances are that the chip on the black needs to be replaced. It doesn't matter how full the cartridge is. Once the chip registers that it has used the amount of ink that it came with it will display as low/empty.

  • @rogers6168
    @rogers6168 3 роки тому +1

    Hey there, thanks for video. So, with the 7840 you have to remove the chip & place onto the sub ink cartridges?
    Thanks again!

  • @sophiasandoval7742
    @sophiasandoval7742 3 роки тому +1

    Can we just just use the same chip in refill the ink cartridge that was already converted ?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Sophia, unfortunately no. Once the chips registers that a certain amount of ink has been used it will display low/empty. Even if you try to fill the cartridge while they half full.

  • @IROOKLYN
    @IROOKLYN 3 роки тому +1

    do you know if you can use edible ink for cake designs in that cartridge

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      I actually do not know the answer to that question. So i have reached out to the company to get that answer for you. I will let you know as soon as i hear back from them.

  • @face111corona
    @face111corona 3 роки тому +1

    I just subbed to the channel and I just bought this printer after seeing a few videos on it. I'll be waiting for the chipless firmware but until then isn't there a way to reset these chips? Resetting would save sooo much hassle...

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Thank you for subscribing to my channel. I agree, being able to reset the chips would make all the difference. However, i haven't found a company that has a reset for the 812 chips, yet. There are a couple of them working on it.

    • @face111corona
      @face111corona 3 роки тому +1

      @@LeeLeesCraft Yessir....gonna have to be patient and creative.

  • @danielarosa5263
    @danielarosa5263 3 роки тому +1

    I have these same ink cartridges for my WF-7829 and the chips won’t go in at all. Is there anything I could do to fix it?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Daniela, are you cutting the little tab at the end of the cartridge?

  • @1113hawaii
    @1113hawaii 6 місяців тому +1

    Nice video, If this works so good for the Epson printer what about an HPs Or other printers. I got rid of my HP 4470 because I can't afford the ink. (i'm only on SS) If the chips come off that easy, must you keep doing this for each cartridge purchase, or can you just reuse those and keep refilling them? Man, It's all about saving money so we all can afford to run our printers. Thanks again for the great video. (I only wish this was a tank printer)

    • @LeeLeesCraft
      @LeeLeesCraft  3 місяці тому

      Thank you for watching the video and for your great question! Unfortunately, the technique of removing and reusing chips varies significantly between printer brands and models. For HP printers like your former HP 4470, the situation can be more challenging than with some Epson models because HP often updates its firmware to restrict the use of non-HP or refilled cartridges.
      For most printers, once a chip registers a cartridge as empty, it cannot be reset or reused as is. This means that in most cases, you would need to purchase new cartridges or explore methods to reset the chip, which, it's important to note, is not always possible.
      Given your focus on affordability, looking into printers like the Epson EcoTank or other tank-based printers might be more cost-effective in the long run. These printers do not use traditional cartridges and instead have refillable ink tanks, which significantly reduce the cost of continuous ink replacement.
      Thanks again for your interest and support of the video!

  • @hopeshaw8310
    @hopeshaw8310 3 роки тому

    I installed new chips last week in my wf 7840 for the first time and after only 12 prints the magenta cartridge is having a chip error. Saying cannot recognize cartridge. Any suggestions? I have about 80 shirts I need to have ready within 10 days.

    • @hopeshaw8310
      @hopeshaw8310 3 роки тому

      The chips are the ones that came with the Epson ink cartridges.... I can't understand why it is saying not recognized.

  • @kalivanatti6871
    @kalivanatti6871 Рік тому

    I have a wf-7820 and he keeps saying my black ink cartridge isn’t recognized I don’t know what to do

  • @brefranks19
    @brefranks19 3 роки тому +1

    Do you have to replace the chips, every time the refillable cartridge (with sub dye) is empty?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Hi Sissybug, unfortunately until a conversion kit is available you will need to change the chips every time the refillable cartridge is empty.

    • @brefranks19
      @brefranks19 3 роки тому +1

      @@LeeLeesCraft so I’m not able to fill them before they are empty, while using the same chips. Thanks for responding. My husband and I got this printer and are hoping for a conversion kit.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +3

      Sissybug, you're welcome. If you refill the cartridge before its empty the chip will still register the cartridge as empty when it goes through the amount that it is programmed to handle.

    • @lisabeavers3152
      @lisabeavers3152 3 роки тому

      I didn't see a link where you get your registration cartridges from. Curious where you got it since the ink quality doesn't matter since we are only using the chip

  • @JasmineN16
    @JasmineN16 3 роки тому

    Great Tutorial!! Thanks so much!!

  • @jramatic1976
    @jramatic1976 3 роки тому +1

    What do you do with all the unused epson ink/cartridge?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      For now i am just keeping them around. Hopefully in the future after a chipless driver for the printer comes out i'll be able to use it if i need to print with regular ink.

  • @jramatic1976
    @jramatic1976 3 роки тому +1

    Can you post a video of subbing the tumbler? Thanks so much!

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      I will work on it.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Here is a new video of me sublimating a tumbler: ua-cam.com/video/99D7h-KCh40/v-deo.html

  • @aliciamendez7917
    @aliciamendez7917 3 роки тому

    hi i converted my epson 7820 but its printing with verticle lines can yo uhelp?

  • @valenciachenier7734
    @valenciachenier7734 3 роки тому +1

    How long did the ink last from your previous video?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Hi Valencia, i did about 70 mugs, 10 tumblers and 1 shirt. So i guess it really depends on the size of your images. This time I've done about six 12x12 HD panels and 6 tumblers and my color inks are already about 85% done. The 12x12 panels used a lot of ink.

  • @philisswanier5714
    @philisswanier5714 3 роки тому +1

    How do you get the ink to fall? Mine is coming out light

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      What print settings are you using? And time and heat when sublimating?

  • @tiffanybrown4647
    @tiffanybrown4647 3 роки тому +1

    After I did setup it immediately said low ink. Do you have to get new chips everytime it say low ink?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Tiffany, unfortunately for now, yes, you have to get new chips every time it says low ink.

    • @Ari_gatcha_gamergirl
      @Ari_gatcha_gamergirl 3 роки тому +1

      @@LeeLeesCraft so everytime u gotta buy ink

  • @1LTWashington
    @1LTWashington 3 роки тому +1

    what sublimation ink do you recommend for the epson 7820

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      I have been using Inkxpro. However, i have a set of cosmo ink that i am looking forward to trying.

  • @kristinapopejoy148
    @kristinapopejoy148 3 роки тому +1

    Where are you getting your refillable ink cartridges for the wf7820?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Kristina, i get them from here: www.dynamitegorilla.com/product-page/802xl-refillable-cartridge-set-no-chips

  • @lynnettejackson4209
    @lynnettejackson4209 3 роки тому +2

    Hello, can anyone tell me which chip resetter will work on an epson 7820 ?

  • @hoseahosea3680
    @hoseahosea3680 3 роки тому +1

    I’m in New Zealand is this printer the same as the wf 7845? Just came out to replace wf 7710 Thanks for your help

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Hosea, yes they are the same printers. I double checked that they take the same cartridges.

  • @cherishjulian6560
    @cherishjulian6560 3 роки тому +1

    I just replaced my chips at the beginning of this week & they were half full but reading low. I printed some transfers this week and today (Thursday) it is already saying low again 😫 how is that possible?! $75 just to replace chips every few transfers is expensive! Is there someone cheaper I can get the cartridges or chips? Thanks!!

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Hi Cherish, that's the reason why I ended up getting the Epson ET-2760 to printout small prints until they release a reset chip for that printer or a chipless driver. Printing 12x12 photo panels, I was only getting 7 or 8 prints before having to replace it. Unfortunately, there aren't any cheaper options for cartridges or chips. I keep searching. If I find anything, I will let you know.

  • @carrasco1642
    @carrasco1642 3 роки тому +1

    Waaaay off topic but what kind of watch you have?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Hi, I have an Apple Watch Series 4.

    • @carrasco1642
      @carrasco1642 3 роки тому +1

      @@LeeLeesCraft thanks for the reply, too bad I don't own anything Apple 🥺 lol

    • @carrasco1642
      @carrasco1642 3 роки тому +1

      It looks like a bad ass watch 🙂

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      You can email me directly leeleescraftstore@gmail.com and what watch do you use?

  • @nikkiw5152
    @nikkiw5152 3 роки тому +1

    I just got this printer and set it up but I cannot get it to print. It just keeps printing blanks and I do not know how to fix it.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Nikki, send me an email to leeleescraftstore@gmail.com and i'll see how i might be able to help.

    • @marias7778
      @marias7778 3 роки тому

      Same here and black ain't reading either

  • @Alejo-lo4dw
    @Alejo-lo4dw 5 місяців тому

    al poner el chip original se puede recargar muchas veces?

    • @LeeLeesCraft
      @LeeLeesCraft  3 місяці тому

      Para continuar imprimiendo una vez que la tinta se agota, necesitarás un nuevo chip en cada recarga de cartucho.

  • @Alann566
    @Alann566 3 роки тому

    How do you print 13x19?

  • @denisej.527
    @denisej.527 3 роки тому

    Informative video😊

  • @sonyajulien6843
    @sonyajulien6843 3 роки тому +1

    How do you fix if it says cartridge not recognized

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      You can try this, It has worked for some people but not for everyone. Take the cartridge that is not being recognized out of the printer, shut the printer off, disconnect it from the power, press and hold the on button for about 10 seconds and let go. Reconnect the power and turn it back on. After the printer finishes loading, try the ink again.

  • @Beer_N_Bubbles
    @Beer_N_Bubbles 3 роки тому +1

    How many sheets can you get out of the ink?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      I was getting only about 30 to 40 on 8.5x11. On 13x19 maybe 10.

  • @Ari_gatcha_gamergirl
    @Ari_gatcha_gamergirl 3 роки тому +1

    is this how the same way to convert the 7840

  • @cynthiahumphrey8491
    @cynthiahumphrey8491 3 роки тому +1

    I keep getting a warning ⚠️ that the blk ink is low when it's full😩 what do I do PLEASE help. Thank you

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Cynthia, if you are using the chips from the original cartridges that came with the printer, those cartridges are what they consider a starter pack. So the chips are programed to show very limited ink inside the cartridge. So once the chip shows that its empty the printer will show as empty regardless of how much ink is inside the cartridge. You'll need to purchase another set of epson ink.

    • @cynthiahumphrey8491
      @cynthiahumphrey8491 3 роки тому +1

      @@LeeLeesCraft no they are new not the starter ones.

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Unfortunately, there isn't anything that can be done if the chips are reading low. It doesn't matter how much ink is actually in the cartridge. It's all about the chips and there isn't a chip reset available for that printer at this time.

  • @nyc.lonnie2320
    @nyc.lonnie2320 2 роки тому

    when i try to print the image, it says my printer has a internal error.

  • @77parrothead
    @77parrothead 3 роки тому +1

    Couldn’t you refill these before they got low and read “low” so you don’t have to change the chip every time?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +2

      Hi, no, the chip registers a certain amount of ink. So regardless if you fill it up half way it will still show low/empty when it has gone through that registered amount of ink.

    • @kenyajon1476
      @kenyajon1476 3 роки тому +2

      this lady that i am in a group with saids she refill hers just fine and it works

    • @emilyfrazier4344
      @emilyfrazier4344 3 роки тому +1

      @@LeeLeesCraft Can you keep the refillable full so that it doesn't read low/empty??

    • @chaneltucker5308
      @chaneltucker5308 3 роки тому +1

      So will these refillable cartridges fit the wf 7840? I'm ready to.convert!

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      That is interesting to know how she does it. The chip doesn't work that way. I goes by the amount of ink that it was registered to have. So i would love to know how she does it for the Epson 7820.

  • @ced2x628
    @ced2x628 3 роки тому +1

    So I have to buy a new chip every time

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi, for now until a ink conversion kit comes out you would need to buy a new chip every time.

    • @ced2x628
      @ced2x628 3 роки тому +1

      Can I use the sublimation paper more than once ?

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      No, you may find that there is some ink remaining on the paper, it will not be enough to make a good-quality print after the first use.

    • @Mainecoonmanors
      @Mainecoonmanors 3 роки тому +1

      @@LeeLeesCraft Hello how do I buy a new chip every time I need to replace color ink? Do I have to purchase new ink from Epson and go through the same process every time I need ink? Then purchased the sublimation ink again.Thank you very much I am a newbie

    • @LeeLeesCraft
      @LeeLeesCraft  3 роки тому +1

      Hi Delphine, unfortunately for now, you would have the go through the same process every time the printer says the ink is empty.. You'll need to purchase new epson ink and take the chips from them. Chances are the cartridge will still have sublimation ink still inside of them. You'll just need to add a bit more.

  • @2exiw
    @2exiw 2 роки тому

    It cost to much for the. Chips.