✅Buy a new chain here ➜ amzn.to/2IuduyA For more videos like this, check out: 👉Correct Way To Adjust The Chain Tension On Your Chainsaw ➜ ua-cam.com/video/FxgQSPQeYYM/v-deo.html 👉How To Repair A Chainsaw That Cuts Crooked ➜ ua-cam.com/video/AgCZxee2NPA/v-deo.html 👉Correct Way To Sharpen A Chainsaw ➜ ua-cam.com/video/-GIxowey6IQ/v-deo.html 👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ ua-cam.com/video/M6T5JoGXcHY/v-deo.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon
Is it better to run full size chain over pico or low profile? My 550 XP Mark ii css as me with a 20 inch bar .325 .050 72 dL, but they rave about the kerfs bring smaller, I guess like pico, but I just want to buy the best chain for cutting I can
Excellent presentation on chains n bars . I have worked in the woods my entire life 40 yrs and have handled chainsaws the whole time. Now we have equipment that does all the work without the need for a saw. I'm still in the words working . My brother's n I are 4th generation loggers here in West Virginia . So I can write a book on chains and bars and the problem's they have in the forest industry because I have lived it first hand. I was also the saw mechanic for 20 years after my Uncle went on to be with the lord. I still work in the woods during the day and a saw mechanic in evenings and Saturdays. Am a Gold level certified trained Husqvarna warranty repair person , 60 yrs old and love what I do. And love your videos. So I say again Excellent presentation !! . 👍👍
Hey there fellow West Virginian. Glad to hear ur enjoying life. I'm in southwestern WV where abouts u located? Do u have a shop? I would love to give u some business
Total respect to you sir, my uncle in Ireland did the same as yourself, now i need some advice on the subject I know he would be the man for it and probably tell me the machine I was using wasn't worth wasting my time and tell me to come visit him to get a new one. He showed me when I was younger 16 or so how to use one miss the legend. Much love to you and your family sir.
Another great day, I learned something! I haven't worked in a small engine shop since 1986 and back then I either had to go into the book to see what chain the saw had or take the chain the customer brought in and read the numbers stamped on the drive teeth then count the drive teeth to cut the correct chain for the customers saw.
Hi Steve. My brand new Husqvarna 460 Rancher, 24', had a chain problem. The new, sealed in bag, chain which came with the new chainsaw turned out to be the wrong gauge! The included chain was .058 and the required chain was .050 gauge. Luckily I had bought 3 new chains (.050) when I bought the chainsaw. The included .058 chain would not slide around the chain guide. The 050 worked great. You saved me after hours of trying to get the original chain to work. Thanks.
Nice dude! Thx I was standing in Atwoods for thirty five minutes reading chains & comparing them before I decided to go back home and look at my saw closer lol. This video helps too!
Very informative, so glad I watched. Im the guy who just bought a chain because the package said it fits the make and model of Remington chain saw I own. I hope it fits proper. Wish I watched this video before buying.
Again great video! I know you can’t cover every possible chain scenario. Advising people to bring the whole saw in was very good advise. If the saw is just like the factory made it your info is spot on. I have purchased used saws where parts were changed from the factory parts. I have found myself mixing and matching brands of parts that effect chain size to non conventional chain lengths or gauge. For instance I use aftermarket brand guide bars sometimes, different tooth count drive cog to gain more chain speed, or to go to a larger gauge, even interchange brands of chain, I happen to prefer Stihl brand of chisel profile chain over Husqvarna, Oregon, or Carlton comparable chains. Often times that means buying a prepackaged chain and removing a link or 3 to make it work on my saws.
That's a good looking bud you have there. I have been watching your videos for a long time now. And I have tried to buy the right things that you are always talking about. Whether it be a simple adjustment on a chainsaw or a weedwhacker,You have been there for me every time. And you have saved me a lot of money over the years. I am forever grateful for your experience in chainsaws and other equipment as well .thank you for all of your help.
Thank you, excellent. I looked this up because I have been teaching this same information to my crews and wanted to make sure I was not missing anything. I learned more about picco, thanks. Two things could be added: the reason why it is so important (performance, safety, etc.) and to reference the recommended chain in the operators manual if you have it. Thank you for your videos!
I was a former educator would I appreciate about this man is he thoroughly explains every detail bring the information together clearly and concisely. He does it in a personal way and he also appreciates all varieties of beers from low budget to microbreweries to higher quality that's a real beer Guy. We got plenty of wood to cut here in Arkansas so we appreciate the help
Also might be helpful to point out that the other number he didn’t mention on the first bar (1.3) is just .050 in millimeters. So you’ll see .050/1.3mm or .063/1.6mm on your bar or box for the chain. But don’t let that confuse you, both numbers mean the same thing depending on if you (or online store/vender) use the US or metric system. AAAAND.... sometimes 3/8 pitch is written as .375, which is confusing because there’s another pitch, .325 that is really only ever called .325. So people are used to seeing the pitch written as: 1/4-.325-3/8p-3/8-.404 and when people see .375, they often read it as .325 really fast.
Thanks Steve, great video. I've always run bigger saws with 24 inch bars like my Stihl MS441 Magnum. Recently had people give me a 14 inch Ryobi and 18 inch Homelite with the smaller chains , but was confused that they were both 3/8. Thanks for clearing that up!
Great video Steve, love the channel. I've learned more from you than anyone or any channel. Question: Is it possible to upgrade from a picco to a full size chain? Is there anything besides a new guide bar that would be needed? Between brands, how interchangeable are the bars? What is a skip chain?
I just bought 90 acres and a brand new Sthil chainsaw. I have been rough on my chain and am getting very tired of hand sharpening it. I want to order a couple extras and let my local saw shop sharpen them. I knew my favorite small engine man would have a video on it! Thanks. Do Canadians do Thanksgiving? If so, I hope you had a good Thanksgiving.
Thank you sir for sharing your wisdom. Great camera close ups to actually show us. Just to help you, out here in Oregon we pronounce the ‘gon’ sounds like gen that rhymes with ‘when’ and not like gone. Or-e-gen. 🙂 This is only to help you sir I enjoy your videos and think you convey your knowledge in an outstanding manner.
So if I'm buying a new saw, and have the option of choosing between 050 or 058 bar and chain options, why would I pick one over the other? What are the pros and cons of wider vs narrower?
Best advice you gave was '...take it with you'. Went to large, local small engine shop for a simple replacement oil filler cap (Echo CS400) about 6yrs old. Long story, short...the OLD caps screwed to the inside (i.e., male style) the NEW CS400's changed to style w/threads protruding on the outside of tank. BUT, they were adamant I was hallucinating UNTIL I went to my truck and took it inside...I should have bet them $$$
Thanks mate for other video about surging lawnmower etc I did what you said and mower now running like new! Prob saved me 100 bucks if I took to get it serviced, very happy cheers Sharky nth Qld Australia 😎
Thanks Steve. I killed the chains on two of my three saws after the Derecho here in Houston the past few days. This helped me to order replacements. Can you tell us a bit about the difference in tooth count -- what it does for and against you -- assuming the other parameters on the chain (pitch and drive width) are the same?
Dude!! Everything I wanted to know in a short video, explained in a way I could understand. Thanx. You are awesome! Enjoy your Old Milwaukee you earned it!
Thank you! I’ve been a little confused on these numbers. Your explanation solved my questions. I’ve got three saws now with a fourth coming. I’m starting to buy chain by the real, and make my own loops. You can save about 30% this way. I’m getting into slabbing enjoying it very much. That’s what the new saw is for. I would enjoy seeing a video that you make on making these loops. Again thank you for time and videos keep up the great work.
Just found your channel and have been going through all of the videos when I realized I needed a new chain for my saw. Wondering/hoping you had a video on this and sure enough there it was. I never knew about the chain info, I used to just go buy the correct length and that was it. I have a pretty pricy Stihl now so I figured I'd do some research and I'm glad I did. Thank you
Great video, Steve. I do what you first suggested and just take the whole lot to the shop. All that stuff about pitch and gauge has always confused me and always will confuse me. Anyway, I like looking at all the new toys in the shop. Cheers.
Even though I have been using chainsaws for many years I always learn something from you,thanks Steve..... vehicles I have now MS361 MS170 & on order CS2511T... oh yeah & a pos greenworks cordless saw.Can't wait for the little Echo to arrive!
Steve I have a Stihl 029 with a .325 x .063 x 74 drive chain now. with an 18" bar Would I benefit from installing a .375 chain with an 18" bar chain combo?? If so, how would I determine the other two numbers that would match the new size bar/chain combo?? If I do this would I also need to change my clutch? Mine cuts fine presently, but I was just wondering. Thank you....Pete
Great vid, it helped me understand in the hopes of "NOT" buying the "WRONG" chain replacement. I have a Poulan Electric 16" (Model: PLN3516F) fits my occasional use as a residential homeowner. I've had it for some years now with no issues. Recently though, I beat-up/abused the chain in attempting to cut away some overgrown tree roots (too much dirt and small rocks). Unfortunately, my model is discontinued to include the chain replacement part number. I would expect the Poulan's website to have a new part number, but it does NOT!!! And with all the types of 16" chains I see why many report as not fitting whatever...It's not rocket science but dang...sometimes they don't make it easy. After searching my local big box stores, a few local stores, as well as online. Hopefully, I found a proper replacement with all the proper specs as that needs to be paid attention too...thanks to this vid...my chain looks pretty beat up and its barely cutting, my handsaw cuts faster. LOL Will take a look at the "correct way to sharpen a chainsaw", I may be able to get a bit more cut out of it... :)
The portion distinguishing standard profile from low profile/picco chain was especially helpful. If you have a saw between 42 and 50 cc's with an 18" bar, you have to know your chain profile along with pitch, gauge, and number of drive links. I was not sure what I had until I saw your video.
Steve, I have a Husky 592XP, it came with a 3/8 pitch, 7 slot rim sprocket. Are there different gauges for rim sprockets? I have a .050 gauge bar and chain right now and I am looking to see if I need a different sprocket to match with a new .058 gauge bar and chain.
On my porch, drinking a Sam Adams Octoberfest and watching ANOTHER one of your great video! Right now I own 4 chainsaws and 6 or 7 bars and cut about 6 cords per year on my property for the following year. I keep all my chains fairly organized with the guess method. It always seems to work alright but now I better understand. What does that small number stamped on chain mean? Thanks!
@@StevesSmallEngineSaloon how many round file sizes are there then. 3.5, 4, 4.8 what file for sharpening 660 chain... I've filed my 261 chain with the thinner wrong grinding disc didn't realize until I started cutting again.
Thanks Steve. Great info as always. My question is about buying a new bar and chain. How do I know what fits my Stihl? I have a 500i, 311 and 193. For the 500i I want to do some milling with a 42” bar. It came with a 25” bar. Suggestions?
Steve I have an old Stihl 011 avt with a 16in" .050 3/8 pitch 55DL Picco chain and bar. I would like a 18" on it. My brother in-law gave me a 18" wood boss "green" but its .063 .325 68DL what would I have to get to make it work. Good video by the way.
Hi Steve, I am a new subscriber and I enjoy your helpful videos on Chainsaws! I am new to them and got my first chainsaw a month ago with zero knowledge other than how to start it and shut it off pretty much! I’m out to learn all the necessary things and be able to do most if not all of my service work to maintain them for years to come
Very good video. Helped clear this up a lot. I have three saws of different sizes and they all have different chains. I don't know if you have a video you already made of knowing which file size to use on which chain size but if not. Would like to see it. Thanks, Tom
my saw came stock with a 20" 50 .325 80dl bar and chain. If adding a longer bar 24" 28", do i just have to make sure its a 50 .325 bar? and then read the DL off the new bar to match it? or is there more than that, then just slapping a long bar with the same gauge and pitch chain?
I just purchased new spare chains for both my chainsaws actually. My Echo didn't have any markings on the bar but the stihl one did. Had to research the Echo.
✅Buy a new chain here ➜ amzn.to/2IuduyA
For more videos like this, check out:
👉Correct Way To Adjust The Chain Tension On Your Chainsaw ➜ ua-cam.com/video/FxgQSPQeYYM/v-deo.html
👉How To Repair A Chainsaw That Cuts Crooked ➜ ua-cam.com/video/AgCZxee2NPA/v-deo.html
👉Correct Way To Sharpen A Chainsaw ➜ ua-cam.com/video/-GIxowey6IQ/v-deo.html
👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ ua-cam.com/video/M6T5JoGXcHY/v-deo.html
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon
✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/
✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon
Is it better to run full size chain over pico or low profile? My 550 XP Mark ii css as me with a 20 inch bar .325 .050 72 dL, but they rave about the kerfs bring smaller, I guess like pico, but I just want to buy the best chain for cutting I can
Excellent presentation on chains n bars . I have worked in the woods my entire life 40 yrs and have handled chainsaws the whole time. Now we have equipment that does all the work without the need for a saw. I'm still in the words working . My brother's n I are 4th generation loggers here in West Virginia . So I can write a book on chains and bars and the problem's they have in the forest industry because I have lived it first hand. I was also the saw mechanic for 20 years after my Uncle went on to be with the lord. I still work in the woods during the day and a saw mechanic in evenings and Saturdays. Am a Gold level certified trained Husqvarna warranty repair person , 60 yrs old and love what I do. And love your videos. So I say again Excellent presentation !! . 👍👍
I am just trying to find out if I should buy an EGO chain or is it better to buy a chain from Stihl?
Hey there fellow West Virginian. Glad to hear ur enjoying life. I'm in southwestern WV where abouts u located? Do u have a shop? I would love to give u some business
God bless you sir
Total respect to you sir, my uncle in Ireland did the same as yourself, now i need some advice on the subject I know he would be the man for it and probably tell me the machine I was using wasn't worth wasting my time and tell me to come visit him to get a new one. He showed me when I was younger 16 or so how to use one miss the legend. Much love to you and your family sir.
As a newbie. I get so much confidence from these videos
Right on Mikey! Thank You...
Another great day, I learned something! I haven't worked in a small engine shop since 1986 and back then I either had to go into the book to see what chain the saw had or take the chain the customer brought in and read the numbers stamped on the drive teeth then count the drive teeth to cut the correct chain for the customers saw.
Hi Steve. My brand new Husqvarna 460 Rancher, 24', had a chain problem.
The new, sealed in bag, chain which came with the new chainsaw turned out to be the wrong gauge!
The included chain was .058 and the required chain was .050 gauge. Luckily I had bought 3 new chains (.050) when I bought the chainsaw. The included .058 chain would not slide around the chain guide. The 050 worked great. You saved me after hours of trying to get the original chain to work. Thanks.
You're Welcome...
Electric chainsaw owner thanks for making it plain simple
No problem 👍
Steve, just came up on your video for the "situation" I was in. Thanks a lot for the "common sense version". You are up on your game sir.
Very welcome
Nice dude! Thx I was standing in Atwoods for thirty five minutes reading chains & comparing them before I decided to go back home and look at my saw closer lol. This video helps too!
Thank You...
Very informative, so glad I watched. Im the guy who just bought a chain because the package said it fits the make and model of Remington chain saw I own. I hope it fits proper. Wish I watched this video before buying.
Another great video! The only thing I can add is support your local dealer! Without them, we can’t buy other things that we need.
Again great video!
I know you can’t cover every possible chain scenario. Advising people to bring the whole saw in was very good advise. If the saw is just like the factory made it your info is spot on. I have purchased used saws where parts were changed from the factory parts. I have found myself mixing and matching brands of parts that effect chain size to non conventional chain lengths or gauge. For instance I use aftermarket brand guide bars sometimes, different tooth count drive cog to gain more chain speed, or to go to a larger gauge, even interchange brands of chain, I happen to prefer Stihl brand of chisel profile chain over Husqvarna, Oregon, or Carlton comparable chains. Often times that means buying a prepackaged chain and removing a link or 3 to make it work on my saws.
have to respect someone who can be concise and drink beer at the same time
Excellent - So clear & helpful (especially about the 3/8 Picco chains ! )
Awesome, thank you!
This is Dan from Arkansas thank you Steve you saved me lots of money have a good summer Steve you and your family
Thank You...
That's a good looking bud you have there. I have been watching your videos for a long time now. And I have tried to buy the right things that you are always talking about. Whether it be a simple adjustment on a chainsaw or a weedwhacker,You have been there for me every time. And you have saved me a lot of money over the years. I am forever grateful for your experience in chainsaws and other equipment as well .thank you for all of your help.
Thanks 👍
Thanks, Steve! These videos are still helping people! Wish I'd watched sooner.
You're Welcome...
You are a wealth of knowledge. Thanks Steve
You're Welcome...
Thank you, excellent. I looked this up because I have been teaching this same information to my crews and wanted to make sure I was not missing anything. I learned more about picco, thanks. Two things could be added: the reason why it is so important (performance, safety, etc.) and to reference the recommended chain in the operators manual if you have it. Thank you for your videos!
That's just what I need to get, a competent beer assistant! Great videos Steve, thanks!
You're Welcome...
I was a former educator would I appreciate about this man is he thoroughly explains every detail bring the information together clearly and concisely. He does it in a personal way and he also appreciates all varieties of beers from low budget to microbreweries to higher quality that's a real beer Guy. We got plenty of wood to cut here in Arkansas so we appreciate the help
Also might be helpful to point out that the other number he didn’t mention on the first bar (1.3) is just .050 in millimeters. So you’ll see .050/1.3mm or .063/1.6mm on your bar or box for the chain. But don’t let that confuse you, both numbers mean the same thing depending on if you (or online store/vender) use the US or metric system.
AAAAND.... sometimes 3/8 pitch is written as .375, which is confusing because there’s another pitch, .325 that is really only ever called .325. So people are used to seeing the pitch written as: 1/4-.325-3/8p-3/8-.404 and when people see .375, they often read it as .325 really fast.
Great info, Thanks
You’re a classic Steve. Sooo much helpful information and no BS. Thanks from Australia 🇦🇺
No worries
Steve....this was very helpful to those that always ask me these same questions. Now I can refer them to your video. AWESOME ! 👍
Thank You...
beside your perfect explanation on chains: You're maybe the only U.S. guy I know who pronounces "Stihl" right: Thank you for that 😁
Canada actually, but thanks for the compliment!
@@StevesSmallEngineSaloon sorry ...
Can’t tell you how much your videos have helped me learn about saws! Thanks for making them Steve!
Glad to help
Thanks Steve, great video. I've always run bigger saws with 24 inch bars like my Stihl MS441 Magnum. Recently had people give me a 14 inch Ryobi and 18 inch Homelite with the smaller chains , but was confused that they were both 3/8. Thanks for clearing that up!
You're Welcome...
Love your work Steve. I recommend your stuff to lots of people. Thank you heaps.
You're Welcome...
Just exactly what I needed to know. Had no idea I could match my chain and bar numbers myself. Thx
Right on
Thank You Steve. Know how to order a chain now.
You're Welcome...
Thank you for the concise info!
My pleasure!
you rock dude,there is way too many numbers going on here, but you're input does help thanks.
You're Welcome...
Excellent instructional video.
No mistakes in this video!!
Thank You...
Great video Steve, love the channel. I've learned more from you than anyone or any channel. Question: Is it possible to upgrade from a picco to a full size chain? Is there anything besides a new guide bar that would be needed? Between brands, how interchangeable are the bars? What is a skip chain?
I just bought 90 acres and a brand new Sthil chainsaw. I have been rough on my chain and am getting very tired of hand sharpening it. I want to order a couple extras and let my local saw shop sharpen them. I knew my favorite small engine man would have a video on it! Thanks. Do Canadians do Thanksgiving? If so, I hope you had a good Thanksgiving.
Old Swill! love it!
Thank you sir for sharing your wisdom. Great camera close ups to actually show us. Just to help you, out here in Oregon we pronounce the ‘gon’ sounds like gen that rhymes with ‘when’ and not like gone. Or-e-gen. 🙂 This is only to help you sir I enjoy your videos and think you convey your knowledge in an outstanding manner.
So if I'm buying a new saw, and have the option of choosing between 050 or 058 bar and chain options, why would I pick one over the other? What are the pros and cons of wider vs narrower?
THANK YOU FOR YOUR HELP
You're Welcome...
Best advice you gave was '...take it with you'. Went to large, local small engine shop for a simple replacement oil filler cap (Echo CS400) about 6yrs old. Long story, short...the OLD caps screwed to the inside (i.e., male style) the NEW CS400's changed to style w/threads protruding on the outside of tank. BUT, they were adamant I was hallucinating UNTIL I went to my truck and took it inside...I should have bet them $$$
LOL, Right on...
Yes ! I have had same issues with cars & power tools .Manufacturer's change things mid-stream .
you are the best for you time to explain what we need to know thanks neil
My pleasure!
Great info. Now I know what to look for on my two smaller saws (1 pole, 1 electric).
Glad I could help
Hey Steve...I'm an "Old Mill" fan. Enjoy your videos.
Hey, thanks
Thanks mate for other video about surging lawnmower etc I did what you said and mower now running like new! Prob saved me 100 bucks if I took to get it serviced, very happy cheers Sharky nth Qld Australia 😎
Glad it helped
Just excellent! Love your clarity. Thanks.
You are so welcome!
Best explanation I’ve heard yet, thanks! 👍👍
You're Welcome...
Thanks Steve. I killed the chains on two of my three saws after the Derecho here in Houston the past few days. This helped me to order replacements. Can you tell us a bit about the difference in tooth count -- what it does for and against you -- assuming the other parameters on the chain (pitch and drive width) are the same?
Thank you , Steve. My kind of mechanic...cheers! Came here to learn about what chain I need on my chainsaw. And now I know.
You're Welcome...
Dude!! Everything I wanted to know in a short video, explained in a way I could understand. Thanx. You are awesome! Enjoy your Old Milwaukee you earned it!
Awesome, thank you!
Thanks. Informative. Oregon chain for electric oregon has a 91PLX and there are others such as S56 and R56 . What does this describe?
Man... your channel is AWESOME, I just discovered it and I LOVE it...! With the beer...! Thumbs up man...!
Thank You...
Thank you! I’ve been a little confused on these numbers. Your explanation solved my questions. I’ve got three saws now with a fourth coming. I’m starting to buy chain by the real, and make my own loops. You can save about 30% this way. I’m getting into slabbing enjoying it very much. That’s what the new saw is for. I would enjoy seeing a video that you make on making these loops. Again thank you for time and videos keep up the great work.
You are welcome!
Very good video Steve!
Thank you!
Glad you liked it!
Great work Steve, thanks for the clear and easy to understand content. Cheers mate.
Glad to help
im new with chain saws . very interesting Thanks a lot :)
Welcome!
Thanks Steve for this most valuable information, you’re explanation , as usual , was easy to understand.👍
Right on Brian...
Old Milwaukee...
Right then, I knew U were a guy to reckon with. Great informative video.
Thank You...
Another great tutorial!
Thank You...
Just found your channel and have been going through all of the videos when I realized I needed a new chain for my saw. Wondering/hoping you had a video on this and sure enough there it was. I never knew about the chain info, I used to just go buy the correct length and that was it. I have a pretty pricy Stihl now so I figured I'd do some research and I'm glad I did. Thank you
Right on...
Old Milwaukee. I may have consumed those to excess a number of times in my younger years. Not bad beer, as I recall. 😉
Great video, Steve. I do what you first suggested and just take the whole lot to the shop. All that stuff about pitch and gauge has always confused me and always will confuse me. Anyway, I like looking at all the new toys in the shop. Cheers.
Right on
Even though I have been using chainsaws for many years I always learn something from you,thanks Steve..... vehicles I have now MS361 MS170 & on order CS2511T... oh yeah & a pos greenworks cordless saw.Can't wait for the little Echo to arrive!
Right on...
i have the same quiver! Just got my Echo 2511. Great saw
Steve, Very helpful descriptions, thank you!
Very welcome!
Thank you Steve I learned something from that now maybe I want have to go back to tractor supply two or three times to get it right LoL
You're Welcome...
Truly valuable, thank you!
You're so welcome!
Steve I have a Stihl 029 with a .325 x .063 x 74 drive chain now. with an 18" bar Would I benefit from installing a .375 chain with an 18" bar chain combo?? If so, how would I determine the other two numbers that would match the new size bar/chain combo?? If I do this would I also need to change my clutch? Mine cuts fine presently, but I was just wondering. Thank you....Pete
The description of 3/8 vs 3/8P was especially useful.
Right on
Great vid, it helped me understand in the hopes of "NOT" buying the "WRONG" chain replacement. I have a Poulan Electric 16" (Model: PLN3516F) fits my occasional use as a residential homeowner. I've had it for some years now with no issues. Recently though, I beat-up/abused the chain in attempting to cut away some overgrown tree roots (too much dirt and small rocks). Unfortunately, my model is discontinued to include the chain replacement part number. I would expect the Poulan's website to have a new part number, but it does NOT!!! And with all the types of 16" chains I see why many report as not fitting whatever...It's not rocket science but dang...sometimes they don't make it easy. After searching my local big box stores, a few local stores, as well as online. Hopefully, I found a proper replacement with all the proper specs as that needs to be paid attention too...thanks to this vid...my chain looks pretty beat up and its barely cutting, my handsaw cuts faster. LOL Will take a look at the "correct way to sharpen a chainsaw", I may be able to get a bit more cut out of it... :)
look on the drive link for a number. that is the type of chain, then you only need to count the number of drive links.
You just answered all my questions about saw chain , thank you for the information & may God Bless
You're Welcome...
Thanks Steve Big help yet again
You're Welcome...
Nice one Steve 🇦🇺
Thank You...
The portion distinguishing standard profile from low profile/picco chain was especially helpful. If you have a saw between 42 and 50 cc's with an 18" bar, you have to know your chain profile along with pitch, gauge, and number of drive links. I was not sure what I had until I saw your video.
Right on Joe...
I like how Steve drinks his beer on every video. And different brands.
You’re the man! Thank you
You're Welcome...
Thank you. Great teaching.
You are welcome!
Amazing info Steve! Thank you for sharing this.
My pleasure!
Very informative. Thank you!
Glad you enjoyed it!
You make good clear videos....
Thank You...
Steve is informative and funny as hell!- love his videos
Thank You...
Steve, I have a Husky 592XP, it came with a 3/8 pitch, 7 slot rim sprocket. Are there different gauges for rim sprockets? I have a .050 gauge bar and chain right now and I am looking to see if I need a different sprocket to match with a new .058 gauge bar and chain.
On my porch, drinking a Sam Adams Octoberfest and watching ANOTHER one of your great video! Right now I own 4 chainsaws and 6 or 7 bars and cut about 6 cords per year on my property for the following year. I keep all my chains fairly organized with the guess method. It always seems to work alright but now I better understand. What does that small number stamped on chain mean? Thanks!
Homelite Super 2 . I had since 1980 . I counted 53 sharks ,3/8 inch pitch and I am hoping .050. It is on Amazon Oregon S53. Thanks again Steve
Good luck!
440 Stella Artois for me just now. Thanks for the advice I'm running a few saws now wasn't sure.
Good choice!
@@StevesSmallEngineSaloon how many round file sizes are there then. 3.5, 4, 4.8 what file for sharpening 660 chain... I've filed my 261 chain with the thinner wrong grinding disc didn't realize until I started cutting again.
good explanation steve
Glad you think so!
Thanks Steve!
You're Welcome...
This is the first video of yours I've watched. I knew I liked you the second the woman delivered your beer!
Right on....
you are the man
Thank you I have a craftsman's pole saw 8 inches and went to the guide bar it had Oregon R34 pressed into it.
You're Welcome...
Thanks, video was a big help.
Glad to hear it!
who or what company makes the best / longest lasting chainsaw chains ? Awesome channel
Thanks Steve. Great info as always. My question is about buying a new bar and chain. How do I know what fits my Stihl? I have a 500i, 311 and 193. For the 500i I want to do some milling with a 42” bar. It came with a 25” bar. Suggestions?
Steve I have an old Stihl 011 avt with a 16in" .050 3/8 pitch 55DL Picco chain and bar. I would like a 18" on it. My brother in-law gave me a 18" wood boss "green" but its .063 .325 68DL what would I have to get to make it work. Good video by the way.
Hi Steve, I am a new subscriber and I enjoy your helpful videos on Chainsaws! I am new to them and got my first chainsaw a month ago with zero knowledge other than how to start it and shut it off pretty much! I’m out to learn all the necessary things and be able to do most if not all of my service work to maintain them for years to come
Right on...
@Bryce - same here! I bought my first chainsaw (Stihl) about three months ago and Steve’s channel has been a godsend. 😄
So good 😊
Excellent report again
Thanks for the update ☺️
Our pleasure!
Very good video. Helped clear this up a lot. I have three saws of different sizes and they all have different chains. I don't know if you have a video you already made of knowing which file size to use on which chain size but if not. Would like to see it. Thanks, Tom
I think I cover that in my Chainsaw Sharpening video....
Thank you for your help.
You're welcome!
my saw came stock with a 20" 50 .325 80dl bar and chain. If adding a longer bar 24" 28", do i just have to make sure its a 50 .325 bar? and then read the DL off the new bar to match it? or is there more than that, then just slapping a long bar with the same gauge and pitch chain?
What is the best chainsaw blade selling site, and which blades are high-end?
Hi steve
I know you can buy the chain by the bulk so could you show how to make a chain with a link installed
Keep up the good work
Cheers
Do the three eights small chain and a 3/8 full size chain work on the same bar are they fit different bars thanks
Thanks Steve, That was some good information!
You're Welcome...
I just purchased new spare chains for both my chainsaws actually.
My Echo didn't have any markings on the bar but the stihl one did.
Had to research the Echo.
I save the printed part of the package so I don't have to research it a second time.