Getting Started with SketchUp - Part 2

Поділитися
Вставка
  • Опубліковано 8 лис 2024

КОМЕНТАРІ • 140

  • @AshnSilvercorp
    @AshnSilvercorp 7 років тому +36

    ok my mind is being blown by the smart snapping this program has...

    • @TK-pk7cg
      @TK-pk7cg 6 років тому

      AshnSilvercorp same buddy

    • @koldbrew7582
      @koldbrew7582 Рік тому

      To be honest, it’s pretty basic. Most programs have things like this.

  • @neilf1587
    @neilf1587 8 років тому

    hello all, i have been using sketchup for over a year now and find it very useful indeed, however its time to let the tutorials teach me more. yours seems calm and straightforward and easy to follow

  • @crane2724
    @crane2724 7 років тому +8

    Thanks! I had to do this for a project in one of my classes, and I only got to see the last 2 videos, so I was extremely confused. Watching the first 2 now, I feel a lot better about this.

  • @bsmy84
    @bsmy84 4 роки тому +2

    I'm following along with this video with a SketchUp drawing. Everything has been fine up to the FollowMe tool. It won't work as demonstrated in this video at the base of the door casing. Other surfaces, yes, but not at the door. However, it is causing some other bizarre things to happen like walls disappearing and exposing the interior of the house. This is where having a teacher and/or classmates at hand would be invaluable. For the time being, I'm going in circles ... and may have to start over from scratch.

    • @jayb7168
      @jayb7168 4 роки тому

      Same for me. FollowMe tool won't work as demonstrated. I'm on the free version but I assume it should work the same way? Did you figure it out?

    • @jayb7168
      @jayb7168 4 роки тому

      FYI, I actually just figured it out by accident, but the demo sort of shows it anyway. Orbit the house so you're looking under it and drag the FollowMe tool around the bottom edge of the house. It will snap to perimeter of the house like shown in the next part of the demo 6:40

    • @lancelotslover3713
      @lancelotslover3713 4 роки тому

      @@jayb7168 I had the same issue, just posted about it. Saw your post and tried that. The first time I tried to extrude using the under-view I had the same problems, but after several tries it worked. . . .Why would one have to use a particular perspective in order for the tool to work? That seems odd.

  • @g60force
    @g60force 7 років тому +3

    little additional info as some might find it confusing, on several occasion the SketchUp version used in these tutorial video's is not 100% accurate to the latest version...
    For example: the first step [A] VIEW / TOOL PALETTES / ...
    Now it's: [B] VIEW / TOOLBARS / (select) LARGE TOOLSET
    Can i suggest adding CAPTIONS it saves you from redoing the whole video ;)
    to elaborate: when the old video shows directions towards [A] add captions for [B]
    since I just started SketchUp i'm going through all the basic video's...
    and these tiny differences caused my brain to created a small hiccup :D
    [i'm an experience IT guy, but others might get lost]
    PS: thanks for making this awesome program, loving it already...
    gonna try using it to make upgrade parts for garden railroad trains!

    • @davehunt60
      @davehunt60 7 років тому

      Another error I've found is offsetting the door. Despite selecting the correct sides for offsetting the door, the program thinks it's offsetting the whole thing. I'll post a solution if I find one.

    • @MenteDeCieloAzul
      @MenteDeCieloAzul 6 років тому

      thank you for this great suggestion

  • @linamarcelavalenciadurango9952
    @linamarcelavalenciadurango9952 4 місяці тому

    aunque me toca traducir cada pantalla , me encanta como lo explican , gracias, soy estudiante y he sufrido mucho por no saber manejar el programa, y ningun curso lo explica tan bien, gracias

  • @rachelguekbengooi2628
    @rachelguekbengooi2628 2 роки тому +1

    Very clear and easier to understand with many thanks

  • @sibteakbar7226
    @sibteakbar7226 5 років тому

    amazing..
    somehow or the other i have developed liking for learning 3D modelling. yours is the 1st video i have watched in the process..

  • @malcolmw513
    @malcolmw513 8 років тому

    Jees, this program is so natural.

  • @ChinhNguyen-yb3cp
    @ChinhNguyen-yb3cp 3 роки тому +2

    Great teaching. It helps me a lot with basics drawing, which I have not found in other videos. Thank you!

  • @birdyb4604
    @birdyb4604 4 роки тому +1

    I am new to sketchup. Thank you! 😊Your tutorials are easy to understand.

  • @scottyscott9965
    @scottyscott9965 4 роки тому +1

    I just got the basic version, so some of the icons are not visible the same. Is there someplace I can find the hot key index??? Thanks in advance.

  • @කසුන්දසනායක-ච8ට

    its very good for share your knowledge with us thanks very munch & good luck

  • @afshanfsm
    @afshanfsm 6 років тому +3

    THANKKKKK YOUUUUU SOOOOO MUCH! U guys r a great help! God bless!

  • @bluk7048
    @bluk7048 4 роки тому +2

    Thank you for making this video it really helped me

  • @oklu_
    @oklu_ 5 років тому

    This program is super smart and user friendly!! Thank you

  • @benrasmussen8094
    @benrasmussen8094 7 років тому

    so much better then the website

  • @Olorin7
    @Olorin7 5 років тому +1

    Do I need to pay to get the Offset Tool? It's not showing up on the Web based free version

  • @yudilight7855
    @yudilight7855 Рік тому

    Very helful, you are great Brow

  • @robbyhimawangiri2653
    @robbyhimawangiri2653 2 роки тому +1

    WOW SUPER , THANK YOU

  • @catied6913
    @catied6913 7 років тому +1

    You really need to say that the program will NOT allow you to click on the measurement box and THEN type into it, which is the norm and how every other application of any kind I have ever used behaves.Tried typing after clicking once with the rectangle tool, after clicking twice, rectangle selected, not selected, with several different types of other tools selected in case that was the problem... nothing. I had to find the answer elsewhere. You just type the number after starting the box and then press enter. This should be said, because people are going to assume that Sketchup will work like EVERY other piece of software I have ever used in my entire life and that you need to click on the box/in the space/etc etc etc before typing. I'm sure nobody is reading the comments by now, but really.... this should be in the video.

    • @dtrrtd774
      @dtrrtd774 7 років тому

      Not being familiar with other programs, I thought it clear that you just start typing the dimensions without having to click on the displayed dimensions. I was wondering if it did need to be clicked, but just watching the example it shows that it wasn't necessary. Good to know that you can't click on the dimension box though, as I might have thought you could, but just being unnecessary.

  • @thevirginian1248
    @thevirginian1248 3 роки тому

    This is an extremely helpful software, I master AutoCAD and Solidworks, but I can't do what this software is capable to do... thank you!

  • @masonharvey1996
    @masonharvey1996 7 років тому

    thank you. i love your vids keep them up!

  • @zakariyanasr5721
    @zakariyanasr5721 7 років тому +3

    Such a good tutorial. Thank you

  • @salmanyakubukirfi947
    @salmanyakubukirfi947 6 років тому +1

    It's enjoyable. Really helpful! Thanks

  • @darrylbrown574
    @darrylbrown574 Рік тому

    For the most part this video is very helpful.... however, I really had difficulty recreating the follow me tool portion. I selected all the edges of my "house" but when I tried to use the follow me tool I couldn't recreate what was in the video. I just be doing somnething wrong

  • @saeedahmadi7013
    @saeedahmadi7013 7 років тому

    Thanks , it is very nice and helpful....

  • @ross_braun
    @ross_braun 7 років тому +2

    I'm trying to type demensions in, and it's making the box really small

  • @JesarresWorld
    @JesarresWorld 3 роки тому

    Can someone tell me what version he is using in here and also what version you are preferred to use?

  • @nalfein02
    @nalfein02 4 роки тому

    Thank you for your tutorial. it's very helpful.

  • @TheGothicSunrise
    @TheGothicSunrise 3 роки тому

    Consider putting your descriptive text for the measurements not bottom center screen as that's where closed captions are.

  • @HyperShift
    @HyperShift 6 років тому

    WOW lots of great info here i didnt know about

  • @KJ-xi1df
    @KJ-xi1df 6 років тому +1

    when I type 10',20' and hit enter the rectangle just disappears and when it do 10';20' nothing happens...????

    • @KJ-xi1df
      @KJ-xi1df 6 років тому

      nvm I was too zoomed out

  • @RayB5766
    @RayB5766 6 років тому

    My offset tool to create the roof ridge is not working by saying offset 0' with a red line. What should be done in this case?

    • @SketchUp
      @SketchUp  6 років тому

      Rayyan Baichoo Use the Move tool to move the line up.

  • @davidbridgeman8457
    @davidbridgeman8457 4 роки тому

    Really intuitive and clearly explained. Good video.

  • @ismailtleubekov5459
    @ismailtleubekov5459 5 років тому

    It is crazy man

  • @lancelotslover3713
    @lancelotslover3713 4 роки тому

    The "follow me" tool on my version of Sketchup Web isn't working properly. When I try to extrude the trim around the edge of the house, there's no extrusion, only random red lines, and when I click to finish usually some random part of my model disappears.

  • @Coolboater1
    @Coolboater1 4 роки тому

    Does the free web version not have a large tool box.??

  • @romanticscents
    @romanticscents 7 років тому +2

    great video but i am using the trial version of sketchup and i wasn't able to type the measurements 10x20 in the dimensions box. that's the only issue i had, but thank you. i like this program. so far so good! now on to the next tutorial.

    • @wodell586
      @wodell586 7 років тому

      10,20

    • @lab933.
      @lab933. 7 років тому

      it works for me if i put it this way : 10' ; 20'

    • @mr559
      @mr559 7 років тому

      I thought I had that problem too, but it was that I was zoomed out too far so it seemed like nothing was showing. Trying zooming in.

  • @parsashemirani123
    @parsashemirani123 7 років тому

    hello! whenever I type in the same thing you did, the rectangle is a lot smaller than yours

  • @ghulamrasoolmuhammadjamil4476
    @ghulamrasoolmuhammadjamil4476 4 роки тому

    Really helpful...thanks

  • @DeanVMachine
    @DeanVMachine 6 років тому

    I am struggling to get the 2 triangles to connect. I use the full version. Matter of fact this whole project is difficult for me...

  • @mithaainparajan4784
    @mithaainparajan4784 6 років тому

    what type of sketch up is this?

  • @evankwok3899
    @evankwok3899 4 роки тому

    Can you guys make tutorials for windows? I don't use apple software.

  • @homepimpah6404
    @homepimpah6404 8 років тому +12

    you save me bro

  • @debratietz1779
    @debratietz1779 8 років тому

    When are you going to have a tutorial for woodworkers?

  • @Rochana_agrawal
    @Rochana_agrawal 4 роки тому

    i am using verison 2020 i am unable to find the larger toolbar option in view....plz somebody help me

  • @brickboy27
    @brickboy27 5 років тому

    great vid dude

  • @trap_lord7118
    @trap_lord7118 3 роки тому

    I tried to do this with the same dimensions but mine is extremely tiny when I made the base

  • @irenepalomeque2371
    @irenepalomeque2371 6 років тому

    okay bro this video is a radical boy ok

  • @sagaryadav2223
    @sagaryadav2223 5 років тому

    I like your videos sir

  • @franciscovilla9895
    @franciscovilla9895 7 років тому

    There is a Mirror tool in sketch up ?

  • @javanpohl1365
    @javanpohl1365 7 років тому

    The first option on follow-me wasn't working at all, but the second one did.

  • @Coleblacksmithing
    @Coleblacksmithing 7 років тому +2

    it said I can do it on the video but I can do it on the program

  • @cooder8701
    @cooder8701 6 років тому

    its amazing

  • @karthisn1017
    @karthisn1017 8 років тому +1

    Can't able to erase the line above the door/window has shown in this video last step. if i tried to erase it. entire wall is deleted.

  • @noviansyahnoviansyah3187
    @noviansyahnoviansyah3187 5 років тому

    2:58 i can't move the line to draw the roof, any idea what did i do is wrong?

  • @oscarraymondyearu6587
    @oscarraymondyearu6587 5 років тому

    Omg this video was great I love u

  • @AZ-cp7cf
    @AZ-cp7cf 8 років тому +1

    [4:44] 第一次作品成果畫面
    [5:40] Followme tool

  • @totallynotacommie7450
    @totallynotacommie7450 8 років тому

    dude can u also project tanks or planes or stuff like that ?

  • @snaprollinpitts
    @snaprollinpitts 7 років тому

    pretty cool, thanks

  • @olpkol
    @olpkol 4 роки тому

    A good program does not explain how to draw a cube 10 meters by 12 meters by 5 meters for 9 minutes.
    The next lesson is how to find out the size of two different cubes you have drawn in the previous lesson? Minutes 6?

    • @goodboy2724
      @goodboy2724 4 роки тому

      Could u send me this project i don’t wanna do it

  • @mrspibey2537
    @mrspibey2537 7 років тому +1

    Starts at 1:58 thank me later

  • @yajatcharpe7880
    @yajatcharpe7880 7 років тому

    for me when i go into view
    i just can't find the large tool box

  • @lucasjuano2955
    @lucasjuano2955 8 років тому

    hey i cant see dimensions bar thing

  • @TK-pk7cg
    @TK-pk7cg 6 років тому +1

    Cool vid man.
    I would respect a quick follow back from you.
    Thanks anyway dude x

  • @magimaipaulvincent
    @magimaipaulvincent 6 років тому

    Thanks

  • @OmriRon
    @OmriRon 6 років тому

  • @199t8
    @199t8 6 років тому

    but on the online version you lose your selection when you switch tools...

  • @Mtdewbb09
    @Mtdewbb09 8 років тому

    This was really helpful

  • @2306AAA
    @2306AAA 6 років тому

    cool

    • @2306AAA
      @2306AAA 6 років тому

      yes it is you eany meany beany

  • @maifahy8404
    @maifahy8404 7 років тому

    the rectangle is too small when I press enter

    • @maifahy8404
      @maifahy8404 7 років тому

      so I pretty much just drew it myself the best I could to match the vid

  • @baconman6736
    @baconman6736 5 років тому +1

    WoW sUsaN

  • @matthubler7720
    @matthubler7720 8 років тому

    I can't one tutorial to open - always get error messages,!! Hope your system works better than this?

  • @maikdenbesten6225
    @maikdenbesten6225 6 років тому +2

    Uit Thailand ge importeerde zaadcellen

  • @age_of_reason
    @age_of_reason 4 роки тому +2

    6'3", 7.5'? Haha. 3" = .25'. SketchUp Rule #1: use metric.

    • @mvl6827
      @mvl6827 4 роки тому

      Age of Reason not in America. And they also use Fahrenheit!!

  • @BRIanwalter
    @BRIanwalter 8 років тому +1

    Parallel line highlight is not showing

    • @josephreed8176
      @josephreed8176 6 років тому

      Make sure you hover over the line you want to be parallel to when creating the line.

  • @pepitoria1416
    @pepitoria1416 4 роки тому

    Not me here in 2020-

  • @sumanchowdhury6162
    @sumanchowdhury6162 6 років тому

    Ppl who use autocad know how hard to come to this point which seems cakewalk in sketch up

  • @josephledden795
    @josephledden795 6 років тому

    me too

  • @gkflaaaaaaaau
    @gkflaaaaaaaau 7 років тому +1

    with 20',10' I got problems :(

  • @therandom570
    @therandom570 4 роки тому

    im at school and im not supposed to log in so tell no one ;)

  • @tilakpatelyearl6648
    @tilakpatelyearl6648 5 років тому +1

    HI bruda

  • @SolarSunne
    @SolarSunne 7 років тому +3

    anyone here for mario kart custom tracks??

  • @gugungunawan257
    @gugungunawan257 5 років тому

    Subtitle indonesia ?

  • @namelessone1811
    @namelessone1811 5 років тому

    Kinda lost on the follow me tool they didn't explain it very well in this video watch this one I found. Skip the advertisement crap start watching at 1:04 minutes
    ua-cam.com/video/WA-WSV8954c/v-deo.html

  • @curmudgeoniii9762
    @curmudgeoniii9762 7 років тому

    Be careful with Sketchup. Used to be good stuff when google had control.
    But now you can waste a lot of time and energy if you by the free
    version.
    No more 32bit. Why? Pushing to 64 bit and only 64 bit and 32 bit is 30
    day trail. They are pushing everyone to purchase. Bad move.

  • @dustinholland42
    @dustinholland42 6 років тому

    doesn't work

  • @danytenorio1741
    @danytenorio1741 5 років тому +2

    instantly sees video= died

  • @franciscoalejandro322
    @franciscoalejandro322 5 років тому

    bad vi
    de

  • @franciscoalejandro322
    @franciscoalejandro322 5 років тому

    hola ir

  • @Cris022
    @Cris022 7 років тому +2

    well bye bye tinkercad...

  • @collinhinnant165
    @collinhinnant165 7 років тому

    69th

  • @jackr4507
    @jackr4507 6 років тому

    Dab

  • @Alex_Giles
    @Alex_Giles 7 років тому

    Haha

  • @lutsealalt
    @lutsealalt 5 років тому

    Why is this in my recommended

  • @kysyuki4007
    @kysyuki4007 3 роки тому

    it didn't work.......😂😂😂🤣🤣🤣🙌🙌🙌🙌

  • @rawquikh0ney710
    @rawquikh0ney710 7 років тому

    heh X3

  • @KlydeRiolu
    @KlydeRiolu 3 роки тому

    this program is the devil

  • @antoncode3444
    @antoncode3444 3 роки тому

    really awful to follow this prehistorical feet inches asses measurement system. stay at SI only. Otherwise I change to Fusion 360.

    • @SketchUp
      @SketchUp  3 роки тому

      Everything in SketchUp can be done in whatever unit you define in your settings. Just pick what you want to use in the Model Info window.