As a luthier/guitar repair person I am amazed at your approach. There were a few mistakes, but considering this is your second guitar ever, and you tackled an archtop jazz guitar, which is by far the hardest to build, this is amazing. I know you didn't have time for it, but I'm sad to see the finish wasn't level sanded and polished. If you auction it off, try to get a repair shop to do a setup on it, as it greatly improves playability and I could see that the intonation on the tunomatic bridge wasn't set, so the notes won't ring cleanly. I hope this doesn't come through as a negative comment, as that wasn't my intention, just trying to give some advice. This project was truly amazing. ❤
@@frikkied2638 Because there are a few mistakes. People who go out and do things often learn by getting knowledge from people who have done it already. I want honest feedback on my efforts, not empty praise for things that could be improved. If you are experienced and knowledgeable in a field, it is not helpful to do that to a fellow adult trying to develop a skill: don't simply placate with banal praise. However, you're certainly right when it comes to the opposite: empty cruelty aimed at nitpicking or tearing down somebody is even more destructive. This comment, however, does not seem like that to me. It was constructive, supportive, and listed specific practical advice and details from their experience.
You got to be kidding me... this is insane! Just yesterday i wondered when your next video will come out and now you uploaded this banger... just wow! Very well done!
@PaskMakes Sir, I am new to your Channel and am thoroughly BLOWN AWAY by your Carpentry skills and eye for perfection!! GREAT JOB Sir!!! I have an OLD Gibson Acoustic that belonged to my Uncle and then my Dad. That particular guitar has seen a beautiful musical life. I allowed a family member to borrow it and it came back with a broken face! I wish I could get it repaired and back to playable condition someday, but that will cost a lot of money I'm sure!! Again, beautiful build Sir! ❤
I've been playing guitar for 55 years and have owned many. I love watching luthiers build guitars from scratch. I have to say, your meticulous work is amazing! I can't believe that you are not a professional luthier. You take a back seat to no one. Fabulous job!
For a second guitar build, and not even being able to play one yourself, along with the deadline, this guitar has become so much more than being remarkable! And I have built guitars myself. My hat off to you, sir. Much respect.
@@PaskMakes Thank you for the video! You are a wonderful master! The guitar looks very beautiful. But it seems to me that the frets should have been installed in fretboard first and then the binding. Many musicians complain that over time, with changes in temperature and humidity, the frets will protrude and injure the hand.
As a professional musician, an Intermediate woodworker, and semi-pro videographer I am duly inspired. When I hear a great musical performance I pick up my guitar with renewed energy to create... when I see a skilled woodworker, I go down to my shop with renewed energy to create... I know how much time it takes to do things right. The guitar, the video takes tremendous amount of energy and skill. Only the truly dedicated can accomplish something at this level on a regular basis. You have a fan forever. Thank you for your gift of inspiration, it is appreciated.
The thing that strikes me when watching people like Pask work is the level of consistency they can get when free-handing. I really think this is the mark of a master; some sort of muscle memory from all their years of making. Great job - beautiful build!
As usual Neil you never cease to amaze. For a guy who’s only built another previous guitar, you took on a very difficult design and mastered it. You never cut corners. Well done. Isn’t it great when mates can help each other too! Thanks for another great video. Hope you have a very well deserved rest.
As the owner of two Hollowbody Archtop Guitars... I sat "glued" (pun) to your presentation ! Every moment of design build and the expertise of your skills with your tools and knowledge enthralled me... You have given to me a deeper appreciation of ALL my guitars, not least the two that are similar to the guitar you have just created... I shall enjoy playing them more and am inspired to 'play', with focus and patience, at least as 'good' as your creation... Also I 'noted' some of the other excellent comments of your followers (luthiers) and it is simply 'grand' that the world has such talented folk... Thanks 🤠 ! As Louis Armstrong said... "What a Wonderful World" !
Neil, I am speechless. The guitar is absolutely mind blowing and beautiful. My eyes misted a bit. You are such an amazing master craftsman and so inspirational. There will be guitar makers, making guitars their whole life, which would have a better technique. Same for life-long cabinet makers, metal workers, machinists and everything else, but you are one of a kind, Neil. You go into each field and just do it and produce things of beauty. And even if you never make a video to be about you, your humanity shines through. I am so grateful to UA-cam that we are able to watch master craftsmen's work. In past, that would be impossible, unless you had a lot of money, traveled far and were very lucky. And here I can look at your channel and just watch one jewel after another and be amazed. Thank you so much!
Hello Holland 🇳🇱 here and I would like to praise your patience and determination. You took a picture of a book about a guitar you liked and made it out of an old wooden oak plank for over-a 100 years old. Having said that it deserve a round of applause. We used to say that good tools does half the job. I am not a luthier like my predecessors said but I’ll recognise your skills by an instant and your one of ‘m. I’d wish I could play this instrument coz I am just as old as that wood you used for it. But let me thank you, no matter what al the others say, to share this beautiful video with me❤. Bless you man.👍👍Greetz👋
The first four minutes I was like, ok I can build this. Then I decided it best to just sit back and watch a master craftsman create. What an absolutely stunning project. Incredible work. As always, blown away by the details. Thank you for sharing.
How did you know that he exited the womb wood and tools in hand, Setting frets? Or did you temporarily forget all the years experience building skills?
Neal. I love watching your videos. It dawned on me while you were working on this guitar. Why. No CNC. No lasers. Minimal power tools. Lots of hand work. True craftsmanship. I’m not opposed to any of those other things, and I watch other makers that use them, and I like those too. But I just love watching you do so much work by hand, often with tools, you’ve made yourself.
"Он доволен процессом".Как я доволен нет слов сказать.Как классно работал ,я правда рад больше наверное чем сам мастер.Всегда восхищаюсь людьми достигшими МАСТЕРСТВА в своём ремесле.Очень рад ,что такие люди есть.Удачи и всего доброго.
Beautiful work and results. Your "can do" attitude comes through in every word you said, and is truly inspiring. You really understand your tools and how to use them to their best effect. Congrats, and thanks for sharing your build. It was very enjoyable to watch.
That was utterly mesmerising ✨️✨️ This is one of my favourite things I've seen you build. There were so many difficult parts to this, and you made it look easy. Your attention to detail is exemplary👌 I loved the binding and the tailpiece. Well done, Corin, for being a great friend. What a lovely thing to do.
Thank you! I really enjoyed this one too and one of my favourite projects. I definitely didn't find it easy though, there was a fair amount of working out. Corin is really is a great mate and the tailpiece is amazing! :)
Absolutely huge respect to you for challenging yourself to make an archtop hollowbody! Frequently among the most beautiful guitars in the shop/on the stage / in the studio. Well done!
I'm pretty sure that was not a challenge for Neil. If he built a second one, he could probably do it with his eyes closed. Yes, I believe he's that good.
@@PaskMakes It s beautiful, did you weight it?? I wonder how it compares to a Gibson in weight......It s crazy watching you work, you make it look effortless.
A true craftsman,I must say. I enjoyed this video as much as any other guitar build I’ve ever seen. What impressed me was the little solutions I saw, ( cutting the kerf, or the variety of tools, etc.), and the ingenuity you used. Wow! Thank you! I’m now a subscriber! And, what a shop!!
I think I'll talk for everyone by saying: get some rest now! You freaking deserved it! ❤❤ Hell of a build and video to watch. Amazing approach on so many different aspects of this project. Loved every bit of it 👍😍
I don't understand how this method works. If you're wanting the same material thickness over the entire face of the guitar, wouldn't the drill press dpeth need to change and be less as you go from the middle to the outside edge? Maybe he changes the depth as he goes along, he just doesn't mention it.
The outside is carved first, moving the body over the dowel allows you to always measure the distance to the already carved outside rather than its original overall thickness
I'm speechless. The blend of techniques and amount of experience demonstrated... And all with a major time constraint! To me this is a perfect demonstration of what wood working mastery looks like. Hats off, Pask, Hats off...
Great work, amazing you tackled such a difficult guitar in such a short amount of time and filmed the process. I think others have mentioned flat sanding and polishing would take the finish of this build to the next level and it needs a setup for intonation etc. but honestly almost all guitars you buy need a setup and it’s best after the wood and glue has had a few weeks to settle. Well done.
I’m a musician and lyricist but I always wondered how a luthier managed to make great acoustic guitars - Thank you so much for a wonderfully entertaining demonstration. Makes you realise how the great craftsmen of old could make such fantastic instruments with no electrical equipment whatsoever as well. Bravo! Julian
Neil, your patience, attention to detail and craftsmanship are really highlighted in guitar making. It's a truly stunning piece. Good luck in the contest and I'm sure someone will be truly lucky and thrilled to play this one. - Chris
Having made three solid body & one Acoustic guitar myself, the work that you did making that guitar Neil was over the top incredible mate! BRAVO! 👍👍🎸🎸👏👏
6 been binge watching your videos for the past week, even watching some of the older ones Ive watched over the years. I have to say, your craftsmanship, ingenuity, and problem solving is always amazing! I was turned on by your work when I got in to woodworking some years ago, and now I want to try my hand in metal working, so your metal working and tool making vids have been a great help. This guitar build is fantastic!
Neil must be the best maker out there. The only maker channel I can safely say gets a like for just posting, because we know it going to be top quality.
You built that in two weeks? You could have given me TWO MONTHS and I would not have come close to replicating what you accomplished. You are a true artist!
As a 40 year master Carpenter of all sorts of pieces and projects including guitars ,and up to 20 ft handmade boats ,I am very impressed with your attitude and your whole approach.very impressive... Oh and BTW im quite sure that the wood on your top and back is called " lacewood" ,but you probably already know that..
This is a super stunning guitar neil. It must've been such a pleasurable experiance creating a master piece like this and what a privilege to play it . Absolutely fabulous video as always mate 👍🏻👍🏻
@@PaskMakes I think you'd be great. I used to play up until a year ago I had a rather stupid accident and lost two fingers on my left hand so sadly I had to say goodbye to my guitar.
Aww you remind me of my Woodwork teacher at College in the 1960's. The teaching of Mr. Fairweather certainly help me over my adult life Gosh your workshop tools and skills are out of this world. I enjoy playing my fender guitar. I'd really like to learn how to learn how to set up the fret board correctly. Kia ora.
That was great, your recognition of the level of accuracy in constuction together with the choice of seasoned woods is spot on. I am a guitarist and the luthier who sets up and modified my guitars is extremely picky and particular and the results are unsurpassed.
I have built a few electric mandolins and I can attest to the fact that they have required a lot of planning and a wide variety of tools and jigs. An amazing build here, well done.
I've made a couple of 3/4 Guitars, & a number of Ukuleles (all sizes) But I watched in AWE this morning, what a craftsman you are. I'd love to see your video of making the Finger planes you used. Thank you so much for this Video. 10 out of 10.
This is the first video of start to finish guitar building I have watch. I'm just amazed at the skill level you are at with the tools you use and the patience and the time you put into this guitar, way to go man!
wow fantastic! The dovetail work, the neck binding rebate, and then the neck and heel shaping bits - the most stressful, high tension bit of film I've seen in a while! Thanks for putting this out there Mr. Pask.
The extraordinary demonstration of this Aristocrat of work - art. The great Brancusi would certainly have admired the mastery of this gentleman. A wonderful lesson of "A Job Well Done" with love and mastery. Don't let such an art die! I was fascinated by this demonstration film. Thank you and I leave with deep respect for such people.
I have been watching your channel for a while now and it always amazes me how well you make things. All kinds of things! Thank you for sharing all of these with so many of us.
That was a very satisfying watch. I'm not expert, but to me you look like a very talented woodworker who takes great care to make sure everything looks like a deluxe Gibson or Gretch. Even though you didn't have enough time to really buff out the clear coat and what not, the guitar looked perfect to me. Thanks for sharing the build.
Great build! Always nice to see a skilled builder who is not a luthier take a go at guitar building. It's awesome to see new ways to build a guitar and you've done great. I especially like the way you grinded off the fret tangs, not needing to buy fret tang nippers (which might easily set you back $100) and speeding up the process.
Спасибо за познавательное видео!!! Я не сделал ни одной гитары, но теперь я воодушевлен на преодоление всех трудностей изготовления гитары, тем более из старого материала!!! Успехов Вам, мастер!!!
regarding the unenviable job of fishing electronics thru these bodies i saw a trick on another youtube video where you feed and attach soft clear tubing to the pot shafts and pull them through-for the output jack i use the Stewmac device which is a brass 1/4" jack braized onto a length of pliable wire(also great for acoustic elecs too!)
I am in awe of your woodworking skills. Many times in the video I was gritting my teeth. The work was so delicate. It would have been so easy to make a mistake. Congratulations on having such skill. That was like watching an artist. Bravo.
Absolutely amazing skills, and yet even when under a two week deadline, you didn’t cut corners, or make a bad mistake from rushing, and have to rebuild a part. I’m impressed. I feel my hollow body will probably take around 6 months, doing it evenings and weekends around my regular job. Kudos.
What a beautiful work of art,some comments may criticize as not a perfect build but a skilled misician can play a 100 dollar guitar masterfully,this is a work of art and i truly respect and enjoy your craftsmanship,may God keep keep you healthy brother 👍👌
Absolutely incredible build. As a viewer of many guitar builds over the years, in my opinion you could be a worlds top master luthier in no time, selectively choosing the clients you build for.
I've seen DIY bending irons but a heat gun into a pipe is a new one to me. I considered the option to remove the heating element from the gun's enclosure, remove the fan, install it in a pipe and add some mass to help dissipate heat to prevent frying it out, but even though these tools are usually double shielded, you're still dealing with a tremendous amount of AC power without an isolation transformer and an awful lot of hot metal! The current price of bending irons on the low budget end no dead ends with what is available for 50 bucks and a safe unit starts at around $90. *I'm not surprised in that the last time I looked 5 or 6 years ago, the safe and low budget models could be found for around 65 bucks.* I then have to wonder how many small scale manufacturers have gone under due to the dire economic situation in the recent most years. Anyway, the gun into the pipe is a good tactic since most of us aren't bending wood 5 to 8 hours a day 5 days a week. In fact, as a one man show even if you're building for a living this likely still eliminates a reason to buy or build a traditional one.
Love this. Not only having the skill and patience to build the guitar, but seeing proper tools for the job that are in great shape and razor sharp is comforting in itself.
You have absolutely outdone yourself here mate - that is bloody stunning. I've watched a lot guitar builds, and this ranks highly among them. Outstanding
That's a beautiful piece of art,, I love how it turned out This is the absolute truth , I think that's the best sunburst finish I've ever seen, just an excellent blend of color You did an amazing job !
❤ thank you very much for all the work you put in to make this video. I might use it as an example for children to make them understand what it takes to build a guitar and to treat it with respect.
Great work. I learned alot new woodworking skills by watching your videos. Can and will apply some of these techniques to my own build: 5 foot long model of the seagoing tug "Smit Rotterdam". You're a great teacher.
Great build. Lovely to see Australian timbers being used. Silky oak many years. to be commonly used as cheap plywood veneers and occasionally furniture. It’s great to work with though the dust is toxic.
Nine minutes in and I'm super impressed mate. The way you that you have jerried-up the steam box and heating iron is fantastic, it makes this process accessible for anyone.
Beautiful work, so much innovation in designing tools & jigs to accomplish special tasks and the full build within a tight deadline, its amazing, more especially as you're not a professional luthier. There must be at least 3 0s on the price $tag...
Incredible build, I love how we see a lot of the skills and ideas you had in your previous videos all come out in this build! Your atte turn to detail is impeccable! Love it! Thanks Pask!
Wow! I'm no guitarist (or woodworker) but this was one of the best videos I have seen on the subject in a long while. You are truly a journeyman crafter.
I just ran across this video since I was watching a reaction video from a German woodworking channel. I didn't know that you are building guitars as well and participated in the GGBO. As I am a jazz guitar player and very interested in Archtop guitar building I am blown away what you have achieved in a first attempt in this incredible short amount of time. Just amazing, amazing, amazing!
Thank you Neil! I absolutely love this build. I was wondering when your videos were going to be out next and I do like this one a lot. That guitar is so beautiful and you did a phenomenal job on it. One love to all.
Words can not express your talent and mastery you have in all your projects this is one of the best if not the best makers channels on you tube that i have seen. Thanks for sharing another fantastic video
I've always loved the archtop style, and watching your video helped me to understand the build process as no other video has. I don't have the time to watch a 10 part series on a build, and usually by the time they're over I can't remember the beginning steps in order. You are a true craftsman, and I can only imagine what the finished product might be if you were to take all the time you deemed necessary to build a top notch archtop.
As a luthier/guitar repair person I am amazed at your approach. There were a few mistakes, but considering this is your second guitar ever, and you tackled an archtop jazz guitar, which is by far the hardest to build, this is amazing. I know you didn't have time for it, but I'm sad to see the finish wasn't level sanded and polished. If you auction it off, try to get a repair shop to do a setup on it, as it greatly improves playability and I could see that the intonation on the tunomatic bridge wasn't set, so the notes won't ring cleanly. I hope this doesn't come through as a negative comment, as that wasn't my intention, just trying to give some advice. This project was truly amazing. ❤
Great video and work
Why the need to even say there were a few mistakes?
@@frikkied2638because that’s how we learn!
@@gregwilson2245 I guess you're right.
@@frikkied2638 Because there are a few mistakes. People who go out and do things often learn by getting knowledge from people who have done it already. I want honest feedback on my efforts, not empty praise for things that could be improved. If you are experienced and knowledgeable in a field, it is not helpful to do that to a fellow adult trying to develop a skill: don't simply placate with banal praise. However, you're certainly right when it comes to the opposite: empty cruelty aimed at nitpicking or tearing down somebody is even more destructive. This comment, however, does not seem like that to me. It was constructive, supportive, and listed specific practical advice and details from their experience.
“I don’t know what I’m doing” and then proceeds to build this absolute work of art. Blown away as usual, it’s truly a thing of beauty
You got to be kidding me... this is insane! Just yesterday i wondered when your next video will come out and now you uploaded this banger... just wow! Very well done!
I was wondering the same thing!
Neil never disappoints! Great skills.
Videos have been a bit slow lately due to them taking a while to produce. Glad you enjoyed it! :)
@@PaskMakes By all means, take your time! They are always a great watch, since you always try something new.
@PaskMakes Sir, I am new to your Channel and am thoroughly BLOWN AWAY by your Carpentry skills and eye for perfection!! GREAT JOB Sir!!! I have an OLD Gibson Acoustic that belonged to my Uncle and then my Dad. That particular guitar has seen a beautiful musical life. I allowed a family member to borrow it and it came back with a broken face! I wish I could get it repaired and back to playable condition someday, but that will cost a lot of money I'm sure!! Again, beautiful build Sir! ❤
I've been playing guitar for 55 years and have owned many. I love watching luthiers build guitars from scratch.
I have to say, your meticulous work is amazing! I can't believe that you are not a professional luthier.
You take a back seat to no one. Fabulous job!
For a second guitar build, and not even being able to play one yourself, along with the deadline, this guitar has become so much more than being remarkable! And I have built guitars myself. My hat off to you, sir. Much respect.
Thanks very much! I may make another sometime, I really did enjoy it. :)
@@PaskMakes Thank you for the video! You are a wonderful master! The guitar looks very beautiful. But it seems to me that the frets should have been installed in fretboard first and then the binding. Many musicians complain that over time, with changes in temperature and humidity, the frets will protrude and injure the hand.
@@cosmicslider1307 Fret sprout can happen regardless of how the frets are installed but, luckily, it's very easy to fix.
@@FlameFlickers Yes you are right. It happens often, lucky it is not too serious.
Lets not forget the limitation, of recycled wood, which makes it even harder.
As a professional musician, an Intermediate woodworker, and semi-pro videographer I am duly inspired. When I hear a great musical performance I pick up my guitar with renewed energy to create... when I see a skilled woodworker, I go down to my shop with renewed energy to create... I know how much time it takes to do things right. The guitar, the video takes tremendous amount of energy and skill. Only the truly dedicated can accomplish something at this level on a regular basis. You have a fan forever. Thank you for your gift of inspiration, it is appreciated.
Well said as I'm pretty much the same.
As a luthier myself I have to say that what you did is very impressive. Amazing what a person can do when they don't sleep.
Sleep is for the weak!
The thing that strikes me when watching people like Pask work is the level of consistency they can get when free-handing. I really think this is the mark of a master; some sort of muscle memory from all their years of making. Great job - beautiful build!
As usual Neil you never cease to amaze. For a guy who’s only built another previous guitar, you took on a very difficult design and mastered it. You never cut corners. Well done. Isn’t it great when mates can help each other too! Thanks for another great video. Hope you have a very well deserved rest.
Thanks Dan! Glad you enjoyed it. It would be a little easier if I make another one as I learned a lot on this one. :)
As the owner of two Hollowbody Archtop Guitars... I sat "glued" (pun) to your presentation ! Every moment of design build and the expertise of your skills with your tools and knowledge enthralled me... You have given to me a deeper appreciation of ALL my guitars, not least the two that are similar to the guitar you have just created... I shall enjoy playing them more and am inspired to 'play', with focus and patience, at least as 'good' as your creation... Also I 'noted' some of the other excellent comments of your followers (luthiers) and it is simply 'grand' that the world has such talented folk... Thanks 🤠 ! As Louis Armstrong said... "What a Wonderful World" !
Neil, I am speechless. The guitar is absolutely mind blowing and beautiful. My eyes misted a bit. You are such an amazing master craftsman and so inspirational. There will be guitar makers, making guitars their whole life, which would have a better technique. Same for life-long cabinet makers, metal workers, machinists and everything else, but you are one of a kind, Neil. You go into each field and just do it and produce things of beauty.
And even if you never make a video to be about you, your humanity shines through.
I am so grateful to UA-cam that we are able to watch master craftsmen's work. In past, that would be impossible, unless you had a lot of money, traveled far and were very lucky. And here I can look at your channel and just watch one jewel after another and be amazed.
Thank you so much!
Yeah, I felt that misted eye thing myself!
Thank you very much Jaromir! I really appreciate the very kind words. :)
Hello Holland 🇳🇱 here and I would like to praise your patience and determination. You took a picture of a book about a guitar you liked and made it out of an old wooden oak plank for over-a 100 years old. Having said that it deserve a round of applause. We used to say that good tools does half the job. I am not a luthier like my predecessors said but I’ll recognise your skills by an instant and your one of ‘m. I’d wish I could play this instrument coz I am just as old as that wood you used for it. But let me thank you, no matter what al the others say, to share this beautiful video with me❤. Bless you man.👍👍Greetz👋
I am so impressed with your skills not only in wood working but video production as well. THANK YOU!
Thank you for the wonderful video!
Skill, craftsmanship and attention to detail on this is incredible but also what we’ve come to expect. Good stuff!
Thank you - glad you enjoyed it! :)
Fantastic job
The first four minutes I was like, ok I can build this. Then I decided it best to just sit back and watch a master craftsman create. What an absolutely stunning project. Incredible work. As always, blown away by the details. Thank you for sharing.
You are a natural at archtop building. For your first scratchbuilt guitar EVER to be an archtop hollowbody is INSANE. Good job.
How did you know that he exited the womb wood and tools in hand, Setting frets? Or did you temporarily forget all the years experience building skills?
Neal. I love watching your videos. It dawned on me while you were working on this guitar. Why. No CNC. No lasers. Minimal power tools. Lots of hand work. True craftsmanship. I’m not opposed to any of those other things, and I watch other makers that use them, and I like those too. But I just love watching you do so much work by hand, often with tools, you’ve made yourself.
"Он доволен процессом".Как я доволен нет слов сказать.Как классно работал ,я правда рад больше наверное чем сам мастер.Всегда восхищаюсь людьми достигшими МАСТЕРСТВА в своём ремесле.Очень рад ,что такие люди есть.Удачи и всего доброго.
This is the second best looking thing you have ever made in my opinion. That Kayak is amazing. 😃
Thanks very much! :)
Beautiful work and results. Your "can do" attitude comes through in every word you said, and is truly inspiring. You really understand your tools and how to use them to their best effect. Congrats, and thanks for sharing your build. It was very enjoyable to watch.
Your patience is inspiring. Years of perfecting your craft clearly shows!
Thank you! :)
Wow! Just WOW! A level of patience and talent I'll never have!! I thouroughly enjoyed watching you making art from scaps of wood.
That was utterly mesmerising ✨️✨️
This is one of my favourite things I've seen you build. There were so many difficult parts to this, and you made it look easy. Your attention to detail is exemplary👌
I loved the binding and the tailpiece. Well done, Corin, for being a great friend. What a lovely thing to do.
Thank you! I really enjoyed this one too and one of my favourite projects. I definitely didn't find it easy though, there was a fair amount of working out. Corin is really is a great mate and the tailpiece is amazing! :)
Absolutely huge respect to you for challenging yourself to make an archtop hollowbody! Frequently among the most beautiful guitars in the shop/on the stage / in the studio. Well done!
Absolutely insane. The lumber you chose is so clear and pristine. Good for you for taking on another challenge.
I’m sure you must have seen Ken Parker’s videos by now based on your tools and methods.
I'm pretty sure that was not a challenge for Neil. If he built a second one, he could probably do it with his eyes closed. Yes, I believe he's that good.
Thanks very much! The wood worked well, shame about the nail holes but there weren't too many in the end. :)
@@PaskMakes It s beautiful, did you weight it?? I wonder how it compares to a Gibson in weight......It s crazy watching you work, you make it look effortless.
A true craftsman,I must say. I enjoyed this video as much as any other guitar build I’ve ever seen. What impressed me was the little solutions I saw, ( cutting the kerf, or the variety of tools, etc.), and the ingenuity you used. Wow! Thank you! I’m now a subscriber! And, what a shop!!
I can't believe that you made it in two weeks, with such attention to details. Great, great work!
Thank you! It was a little over two weeks and it was crazy long days, I'm still recovering now. I'm absolutely shattered. :)
I love all the temporary jigs you create for specific jobs. I am also very jealous of your tool collection!
Now that is an amazing Guitar Pask, your attention to detail is incredible, I can't wait to see what comes next, keep up the great work mate.
Thanks very much! :)
I think I'll talk for everyone by saying: get some rest now! You freaking deserved it! ❤❤
Hell of a build and video to watch. Amazing approach on so many different aspects of this project. Loved every bit of it 👍😍
that dowel and drill press trick is genius. Worth watching the video just for that 10 second clip.
I don't understand how this method works. If you're wanting the same material thickness over the entire face of the guitar, wouldn't the drill press dpeth need to change and be less as you go from the middle to the outside edge? Maybe he changes the depth as he goes along, he just doesn't mention it.
The outside is carved first, moving the body over the dowel allows you to always measure the distance to the already carved outside rather than its original overall thickness
I'm speechless. The blend of techniques and amount of experience demonstrated... And all with a major time constraint! To me this is a perfect demonstration of what wood working mastery looks like. Hats off, Pask, Hats off...
Thanks very much! 😊
Great work, amazing you tackled such a difficult guitar in such a short amount of time and filmed the process. I think others have mentioned flat sanding and polishing would take the finish of this build to the next level and it needs a setup for intonation etc. but honestly almost all guitars you buy need a setup and it’s best after the wood and glue has had a few weeks to settle. Well done.
That is some truly beautiful workmanship and a very fine looking finished guitar. Congrats.
Thanks very much! :)
I’m a musician and lyricist but I always wondered how a luthier managed to make great acoustic guitars - Thank you so much for a wonderfully entertaining demonstration.
Makes you realise how the great craftsmen of old could make such fantastic instruments with no electrical equipment whatsoever as well.
Bravo!
Julian
Neil, your patience, attention to detail and craftsmanship are really highlighted in guitar making. It's a truly stunning piece. Good luck in the contest and I'm sure someone will be truly lucky and thrilled to play this one. - Chris
Thank you Chris! :)
I know nothing about woodworking and am a very average guitarist, but it’s really nice to watch a great craftsman at work. I envy your skill.
Another amazing build and video from my favorite maker on UA-cam!!! You never cease to amaze me. Looking forward to your next project/video!
Thanks very much Reese - Glad you enjoyed it! :)
The level of effort you put in to all your projects is truly inspiring. Great job!
Having made three solid body & one Acoustic guitar myself, the work that you did making that guitar Neil was over the top incredible mate! BRAVO! 👍👍🎸🎸👏👏
Thanks Steve - especially as you know what was involved. :)
6 been binge watching your videos for the past week, even watching some of the older ones Ive watched over the years. I have to say, your craftsmanship, ingenuity, and problem solving is always amazing! I was turned on by your work when I got in to woodworking some years ago, and now I want to try my hand in metal working, so your metal working and tool making vids have been a great help. This guitar build is fantastic!
Neil must be the best maker out there. The only maker channel I can safely say gets a like for just posting, because we know it going to be top quality.
Second that !
I'm not sure about that but thanks very much! Glad you're enjoying the videos! :)
Great work. As others mentioned I admire your patience. It's a very desirable guitar. 👍😊❤️🕊️
You built that in two weeks? You could have given me TWO MONTHS and I would not have come close to replicating what you accomplished. You are a true artist!
As a 40 year master Carpenter of all sorts of pieces and projects including guitars ,and up to 20 ft handmade boats ,I am very impressed with your attitude and your whole approach.very impressive... Oh and BTW im quite sure that the wood on your top and back is called " lacewood" ,but you probably already know that..
This is a super stunning guitar neil. It must've been such a pleasurable experiance creating a master piece like this and what a privilege to play it .
Absolutely fabulous video as always mate 👍🏻👍🏻
Thanks very much Ian! Maybe I should learn to play and build one for myself. I'm really not musical though. :)
@@PaskMakes I think you'd be great. I used to play up until a year ago I had a rather stupid accident and lost two fingers on my left hand so sadly I had to say goodbye to my guitar.
so sorry to hear. I'm sure you've probably seen videos of the great Django Reinhart. Best wishes.@@ianvicedomini2648
Aww you remind me of my Woodwork teacher at College in the 1960's. The teaching of Mr. Fairweather certainly help me over my adult life Gosh your workshop tools and skills are out of this world. I enjoy playing my fender guitar. I'd really like to learn how to learn how to set up the fret board correctly. Kia ora.
You never fail to amaze it’s inspiring me to improve every time you put out a video. Congratulations on this tremendous guitar.
Thanks Steve - Glad you enjoyed it! :)
That was great, your recognition of the level of accuracy in constuction together with the choice of seasoned woods is spot on. I am a guitarist and the luthier who sets up and modified my guitars is extremely picky and particular and the results are unsurpassed.
Beautiful. If it ever needs a neck reset, some poor luthier is going to tear his hair out trying to get all that glue in the dovetail to release.
Your SECOND build? You just gave a master class in luthier"ship" Dude! Kudos
I have built a few electric mandolins and I can attest to the fact that they have required a lot of planning and a wide variety of tools and jigs. An amazing build here, well done.
Guitarist and ersatz woodworker here. I never tire of watching this video! Relaxing and informative! Thanks for posting! 👍
You may not know guitars, but you definitely know woodworking. An impressive build.
Too bad about that butt ugly tail piece
I've made a couple of 3/4 Guitars, & a number of Ukuleles (all sizes) But I watched in AWE this morning, what a craftsman you are. I'd love to see your video of making the Finger planes you used. Thank you so much for this Video. 10 out of 10.
Смотрел не отрываясь , как самый увлекательный сериал . Атомный дед . Сотворить такое чудо за две недели... Браво !! 👏👏👏
атомный не то слово
Wonderful craftsmanship. Especially nice to see this lovely guitar made using reclaimed timber. First class.
This is the first video of start to finish guitar building I have watch. I'm just amazed at the skill level you are at with the tools you use and the patience and the time you put into this guitar, way to go man!
wow fantastic! The dovetail work, the neck binding rebate, and then the neck and heel shaping bits - the most stressful, high tension bit of film I've seen in a while! Thanks for putting this out there Mr. Pask.
The extraordinary demonstration of this Aristocrat of work - art. The great Brancusi would certainly have admired the mastery of this gentleman. A wonderful lesson of "A Job Well Done" with love and mastery. Don't let such an art die! I was fascinated by this demonstration film. Thank you and I leave with deep respect for such people.
Wow! One of the best things I've watched in a long time. I was literally glued to your video.
What a process. Truly amazing.
I have been watching your channel for a while now and it always amazes me how well you make things. All kinds of things! Thank you for sharing all of these with so many of us.
That was a very satisfying watch. I'm not expert, but to me you look like a very talented woodworker who takes great care to make sure everything looks like a deluxe Gibson or Gretch. Even though you didn't have enough time to really buff out the clear coat and what not, the guitar looked perfect to me. Thanks for sharing the build.
Thank you very much! :)
Great build! Always nice to see a skilled builder who is not a luthier take a go at guitar building. It's awesome to see new ways to build a guitar and you've done great. I especially like the way you grinded off the fret tangs, not needing to buy fret tang nippers (which might easily set you back $100) and speeding up the process.
That was pleasure to watch, your attention to detail is phenomenal, and the guitar is a thing of beauty, you sir are a craftsman extraordinaire
Спасибо за познавательное видео!!! Я не сделал ни одной гитары, но теперь я воодушевлен на преодоление всех трудностей изготовления гитары, тем более из старого материала!!! Успехов Вам, мастер!!!
regarding the unenviable job of fishing electronics thru these bodies i saw a trick on another youtube video where you feed and attach soft clear tubing to the pot shafts and pull them through-for the output jack i use the Stewmac device which is a brass 1/4" jack braized onto a length of pliable wire(also great for acoustic elecs too!)
I am in awe of your woodworking skills. Many times in the video I was gritting my teeth. The work was so delicate. It would have been so easy to make a mistake.
Congratulations on having such skill. That was like watching an artist. Bravo.
Apart from an amazing build, the audio quality from your microphone was perfect. If only more UA-cam videos were this good...
Turned out very very very nice!!! Sounds great!!
And thank you for just shop noise, no background music!
Absolutely amazing skills, and yet even when under a two week deadline, you didn’t cut corners, or make a bad mistake from rushing, and have to rebuild a part. I’m impressed. I feel my hollow body will probably take around 6 months, doing it evenings and weekends around my regular job. Kudos.
What a beautiful work of art,some comments may criticize as not a perfect build but a skilled misician can play a 100 dollar guitar masterfully,this is a work of art and i truly respect and enjoy your craftsmanship,may God keep keep you healthy brother 👍👌
Absolutely incredible build. As a viewer of many guitar builds over the years, in my opinion you could be a worlds top master luthier in no time, selectively choosing the clients you build for.
I've seen DIY bending irons but a heat gun into a pipe is a new one to me.
I considered the option to remove the heating element from the gun's enclosure, remove the fan, install it in a pipe and add some mass to help dissipate heat to prevent frying it out, but even though these tools are usually double shielded, you're still dealing with a tremendous amount of AC power without an isolation transformer and an awful lot of hot metal!
The current price of bending irons on the low budget end no dead ends with what is available for 50 bucks and a safe unit starts at around $90. *I'm not surprised in that the last time I looked 5 or 6 years ago, the safe and low budget models could be found for around 65 bucks.*
I then have to wonder how many small scale manufacturers have gone under due to the dire economic situation in the recent most years.
Anyway, the gun into the pipe is a good tactic since most of us aren't bending wood 5 to 8 hours a day 5 days a week. In fact, as a one man show even if you're building for a living this likely still eliminates a reason to buy or build a traditional one.
Love this. Not only having the skill and patience to build the guitar, but seeing proper tools for the job that are in great shape and razor sharp is comforting in itself.
Loved the way you played through the nerves and put your game face on to play for perfection. Nice job, I thoroughly enjoyed it.
I have made 85 instruments over the years yet I marvel at your skill. I learned a lot from watching you. Bravo. great work.
You have absolutely outdone yourself here mate - that is bloody stunning.
I've watched a lot guitar builds, and this ranks highly among them.
Outstanding
That's a beautiful piece of art,, I love how it turned out
This is the absolute truth , I think that's the best sunburst finish I've ever seen, just an excellent blend of color
You did an amazing job !
I am not a craftsman, but I watched your video in amazement! Your talent as a woodworker is truly amazing. I enjoyed every moment. Thank you so much.
❤ thank you very much for all the work you put in to make this video. I might use it as an example for children to make them understand what it takes to build a guitar and to treat it with respect.
Fantastic job and thanks for sharing thestep-by-step process! The tailpiece is a work of art too.
Great work. I learned alot new woodworking skills by watching your videos. Can and will apply some of these techniques to my own build: 5 foot long model of the seagoing tug "Smit Rotterdam". You're a great teacher.
Great build. Lovely to see Australian timbers being used. Silky oak many years. to be commonly used as cheap plywood veneers and occasionally furniture. It’s great to work with though the dust is toxic.
Nine minutes in and I'm super impressed mate.
The way you that you have jerried-up the steam box and heating iron is fantastic, it makes this process accessible for anyone.
Beautiful work, so much innovation in designing tools & jigs to accomplish special tasks and the full build within a tight deadline, its amazing, more especially as you're not a professional luthier.
There must be at least 3 0s on the price $tag...
Incredible build, I love how we see a lot of the skills and ideas you had in your previous videos all come out in this build! Your atte turn to detail is impeccable! Love it! Thanks Pask!
This was the most amazing and gratifying video I've seen Awesome work for all the time constraints you had. Wow. Bravo!!!
Great job ...So much work ...Well Done
Wow! I'm no guitarist (or woodworker) but this was one of the best videos I have seen on the subject in a long while. You are truly a journeyman crafter.
Amazing creatiion from pieces of scrap wood. I loved watching the process from start to finish.Thanks for the post.
I just ran across this video since I was watching a reaction video from a German woodworking channel. I didn't know that you are building guitars as well and participated in the GGBO. As I am a jazz guitar player and very interested in Archtop guitar building I am blown away what you have achieved in a first attempt in this incredible short amount of time. Just amazing, amazing, amazing!
your patience is incredible and your skills are amazing put together to make a great guitar.
How impressive. I do this work everyday of my life and I still learned something! Clever boy you are Mr Brummie.
Thank you Neil! I absolutely love this build. I was wondering when your videos were going to be out next and I do like this one a lot. That guitar is so beautiful and you did a phenomenal job on it. One love to all.
There is really so much that goes into a well made guitar. You didi beautiful work here! She turned out lovely!!
Words can not express your talent and mastery you have in all your projects this is one of the best if not the best makers channels on you tube that i have seen. Thanks for sharing another fantastic video
I've always loved the archtop style, and watching your video helped me to understand the build process as no other video has. I don't have the time to watch a 10 part series on a build, and usually by the time they're over I can't remember the beginning steps in order. You are a true craftsman, and I can only imagine what the finished product might be if you were to take all the time you deemed necessary to build a top notch archtop.