GY6 Ruckus rear disk brake kit [HOW TO]
Вставка
- Опубліковано 18 вер 2020
- Disk brake kit:
www.rollingwrenchdenver.com/p...
Engine stand:
www.rollingwrenchdenver.com/p...
Become a Rolling Wrench member:
/ @rollingwrench
Do you have a GY6 in your ruckus and want upgrade the rear brakes in a major way? This is the kit! this rear disk brake kit for the gy6 will give you about 5 times the stopping power. no more sloppy cable drum brakes. - Навчання та стиль
Perfect kit design and great instruction video.
I so much learn from you thankyou so march
Thank you for the support 🙏🏻💯
Is there any chance that this setup should be used with a standard Vento 13 inch rim
Thank you. I have XS1P52QMI Sym crox 125cc
Can i Chang to brake disk
Waiting answer please
Why you use imperial on a metric engine?
Is the lug nuts and nuts/bolts in this set metric or imperial?
i would love to know about the wheel and the hub , the wheel is like have 4 bolt nuts.
I need one
Like your vids man!!! but can you do some vids about the 139QMB so people like me can learn more about that engine.
It's the same engine just 49cc
Is there also a hub for an Aprilia scooter??? so that i can fit a wider 13"wheel....
What do I do when the caliper hits the bolts on my 2 piece wheels?
Love to have agive aways
Is there amy way to put a disk kit on a gy6 139qmb ?
Should’ve gotten the low stretch swap instead of the OEM look. Oh well Revino it is now!
Is there another way without changing the Wheel ?
Would love to see this for a 50cc!
Dual disk on a 50cc does not make sense, still it sounds cool.
Exist a kit like this for zuma 50?
Hello do you have for Zuma 125
Hello.
Where do you buy a caliper mount for a moto GY-6?
www.rollingwrenchdenver.com
Hows the price for a unit
Can this kit be fitted on a 2018 150 vespa primavera?
No :-(
has my speedfight 3 125cc got a GY6 engine? and is there any mods i can do to make more powerful?
I’m unsure about that model of scooter. If it has a gy6 no problem
What is a good site to get a 50cc long case engine Amazon apparently doesn't have any
Email us. We can get you one. www.rollingwrenchdenver.com
Hi rolling wrench
Hey Roy! How are you man!
@@RollingWrench I been updated video camera gopro hero 5 black on cellphone! I order sugru glue for chin mount!
Why is the bleed valve at the bottom of the caliper? that's gonna make it harder to bleed air bubbles out, since they like to float.
Otherwise, great kit.
You can switch it no problem. There is a bleed hole on both sides :-)
Can you please do it with 10 inch wheels
Not enough room ;-(
And what is the diameter of the disk? 200 or 220mm?
220
Well I have a Genuine Venture. It already had a rear disc setup (with 14" wheel). However, the engine is blown and I want to upgrade to a GY6 (since Genuine wants $1100 for a 49cc engine). Do you sell the kit without the caliper since I already have one? And will this kit work for the Venture? Excellent video by the way.
How did you get 14" wheel in there is there really enough clearance?
@@austinbayse9120 It came from the factory with 14" wheels.
Will this work on a 84 Honda aero nh125?
Isn’t the bleeder supported to be on the top side of a caliper ?
Yes, Ive been burned by that on a disc brake swap before. I had to unbolt and roll around the rotor to bleed. Then re-mount. No big deal really
That caliper has a movable bleeder. But yes, you are correct
Sir how much the Ruscus rear break?
$400
Sir how much the rear set?
$400, link in the video description
Do that make a it for a zuma
Not to my knowledge
I see on the website that this fits a 12x8 but not a 12x7. Can you explain why a narrower rim won't work?
The brake caliper hits the wheel with a 12x7 :-(
Won't work with 10 inch? bummer.
Nada broken GY6 then, haha
hit the dislike twice, then like. great video