Це відео не доступне.
Перепрошуємо.
RaceTech Electric Yamaha Banshee DC Stator & Regulator Kit Installation
Вставка
- Опубліковано 24 жов 2012
- RaceTech Electric shows off their new Yamaha Banshee DC stator & regulator kit for Yamaha Banshee quads. This installation also applies to installing a stock Banshee stator. Check it out and learn all about it! Then head over to RaceTech Electric and get your new DC kit. 200W of power to run all the lights you ever wanted on that Banshee!
RaceTech Electric
www.racetechelectric.com
760-476-3514
contact@racetechelectric.com
I purchased the exact setup. I would like to add that in this video you say the battery wire harness is included. Is not. Also this stator is thicker so the 3 screws that hold the stator to the timing plate will not work. Other than that great product! Easy install!
do they still sell this went to the website and it seems to be down. was wondering if they have moved or just went out of business.
Couldnt you run wires from the battery to the lighting wires in the stock harness that you aren't using?
I'm going to half to get that 4sore.I've got a question and I hope someone has an awnser. A positive wire touches the exhaust and shorted something out.do you know what and where I should start fixing on. Please and thank you
Sorry I couldn't help from that description. Lots of things could need attention from shorting out that wire.
I have to added battery to my banshee, I used to standard stator and fitted a rectifier, same as the one in the video, it all works okay and I'm pretty sure that it does charge the battery but what I haven't done is put a floating ground wire in yet, I'm now thinking if I even need to ??
Where did you get the rectifier?
some diagram how to connect the regulator thanks
I'm looking to do the same. What specs rectifier / regulator does it take?
Do u still have to do a floating ground wire from the stator? To charge the battery? what is a good size battery?
Hi thanks for the video i have a banshe to an im stuck on that part do you mind to tell me what number is the puller tool to buy it
We have the puller at www.rmstator.com.
Will this kit for the 2008 as well . Paralyzed looking to put a battery in my banshee 2008
Yes it will fit any Banshee. www.rmstator.com for the DC kit.
I think 06 was the last banshee made
Would this kit work on a blaster or can I get one for a blaster ?
No, the blaster is a different stator and ignition system.
I cannot get the screws for the cover off any recommendations?
Couldn't I just use my stock stator? What's different about yours? Don't I just need your regulator?
Slam driver works the best ,bust the jb weld loose .
💯🤗💯🤗💯🤗💯👍👍👍👍👍
rad!
you don't explain how to set the grade... why??? that is important.....
Is this company still in bussiness
No south Texas banshee bought him out. Look him up
rebuilt my banshee New reeds and everything will idle fine give it gas it pops what's the deal
Joseph Johnson, did you sync your carbs, check your jetting, if it had bad Reed you might not have been getting the right amount of fuel, someone may have changed the jets to get it to run now you might be getting too much or too little fuel. Also try conpression test for bottom end also check for exhaust leaks and the boots around your carburetor banshees are fickle!!! But once you get it they are fun!! Last thing did you change the size of your piston?