Yo tuve ese mismo problema con mi pathfinder 2010 y conpre la misma pieza en amazon, la unica diferencia es que yo no desarme la parte trasera lo que hice fue sacar la pieza dañada lo mas que se pudo y le corte los cables al ras y con la pieza nueva le corte los cables a la mitad de lo largo que vienen y asi los pude empalmar, encintar y volver a colocar en su lugar la nueva pieza y quedo funcionando al 100, sin necesidad de desarmar nada
All cars have some kind of fail safe. So, it should be somewhere inside, close to the bottom center of the tailgate. There's gotta be one for your truck too. If I'm not mistaken it should be in the same place like mine. Remove the cover and move the lever.
@@4x4AUTOBOT My 2010 Pathfinder doesn't have a manual release either. I pulled the panel away from the drivers side and hooked up the new switch and then opened the hatch to get at the last screw holding the panel on, then Bobs your uncle.
Ech, I can't release from the inside either on my 2010 pathfinder. Doesnt look quite the same as your video. I saw another video showing a switch inside but I see nothing. Guess my only option is to remove inside panel?
Excellent video! It helped me change mine out!
@@jasperdodson happy and glad my vid helped out
Yo tuve ese mismo problema con mi pathfinder 2010 y conpre la misma pieza en amazon, la unica diferencia es que yo no desarme la parte trasera lo que hice fue sacar la pieza dañada lo mas que se pudo y le corte los cables al ras y con la pieza nueva le corte los cables a la mitad de lo largo que vienen y asi los pude empalmar, encintar y volver a colocar en su lugar la nueva pieza y quedo funcionando al 100, sin necesidad de desarmar nada
Ohh awesome . Ill try something like that next time. 👌
Excellent vid. Thanks
I'm fixing to do this as well on my 08. It's a pain to pop the window, then reach in and use the inside latch lol
😁
Try getting in from the rear passenger door and go to the back and do it there, that would be easier.
Thank you for the video,did your hatchback sometimes not lock, and by changing the switch it locked all the time after that?
Not a problem sir. No I didn't have that kind of problem 🤔
Hey, great video. Can you give a link for the part you bought? I have the same problem.
Thanks. Sure here it is
www.amazon.ca/dp/B08DTKN6ZR?ref=ppx_pop_mob_ap_share
How do you replace the Center High Mount break light?
I haven't done one yet. But ill probably make a video soon.
My 2010 Pathfinder does not have the handle to manually open it from inside. What do you recommend to unlock it?
All cars have some kind of fail safe. So, it should be somewhere inside, close to the bottom center of the tailgate. There's gotta be one for your truck too. If I'm not mistaken it should be in the same place like mine. Remove the cover and move the lever.
@@4x4AUTOBOT My 2010 Pathfinder doesn't have a manual release either. I pulled the panel away from the drivers side and hooked up the new switch and then opened the hatch to get at the last screw holding the panel on, then Bobs your uncle.
Ech, I can't release from the inside either on my 2010 pathfinder. Doesnt look quite the same as your video. I saw another video showing a switch inside but I see nothing.
Guess my only option is to remove inside panel?