Looks beautiful, but at 22:21 you can see the run-out. If you can see the run-out with the naked eye, it's too much. You measured 0.13mm total when you pulled and pushed on the chuck by hand. I think that's your actual run-out. As a quick reference, If your run-out is 0.05 mm or less, you wouldn't be able to see movement at the tip. Maybe bearings should be checked or maybe time for a new chuck.
This press has worked like a charm for my projects ua-cam.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
earth - elements - periodic table of elements ⬡ - chemicals - dilutions - S C I E N C E - efficiency - action and reaction forces - it is so beautiful, it will drill a hole to hang a ladle. i gave my Like. 👍
Outstanding restoration cobba, love the effort, time and care you've taken to restore this old beauty. I'm subscribing, can't wait to see what you come up with next. 👍
Really lovely restoration, I have done a few myself. What would be really handy is a list of equipment and processes, especially for things like the way you did the etching of the scale, I'd love to know what you were using.
Well done, sir. Absolutely amazing restoration. The video production was equally good. I have a very similar drill press made by Delta in the 1950s which I have restored, but not nearly as well as the job you did. I've subscribed.
I think I seen 5 but how many layers of paint did that base have on it?? Excellent looking restoration and you did a wonderful job restoring it yourself!!! Enjoyed your video and I gave it a Thumbs Up
Risky - the bearings in the spindle aren't made to take side loads, only axial ones. But the X-Y table will allow the drilling of accurately located holes.
your drill press looks great! btw when you did install the super fast Indian noise that plays when drill? whatever that noise is , it sounds like the cheif trying to stop an earthquake solo
No crappy music & no needless talking makes a good Video, very good restoration
Finally, someone who works smarter, not harder. Every other restoration of one of these they've all manhandled it from up top... great jon
Looks beautiful, but at 22:21 you can see the run-out. If you can see the run-out with the naked eye, it's too much. You measured 0.13mm total when you pulled and pushed on the chuck by hand. I think that's your actual run-out. As a quick reference, If your run-out is 0.05 mm or less, you wouldn't be able to see movement at the tip. Maybe bearings should be checked or maybe time for a new chuck.
You clearly know what you are doing. Nice work!
Классная реставрация! Всё до мелочей . Вы большой молодец! 👍
I'm always impressed with the process you used to make the dial finish.
Beautiful! Love the look of this machine and the color is perfect! Nicely done!
That was a beautiful restoration! Thanks for sharing.
Excellent restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
A beautiful machine indeed. They don't do that anymore today. Good job .👍
This press has worked like a charm for my projects ua-cam.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
That is a nice drill press and great work on your part. Never seen a reverse facility before
Amazing job on the restoration. Your etching was icing on the cake. Thank you.
earth - elements - periodic table of elements ⬡ - chemicals - dilutions - S C I E N C E - efficiency - action and reaction forces - it is so beautiful, it will drill a hole to hang a ladle. i gave my Like. 👍
Another perfect restoration. Thank you for sharing it. Keep up the fantastic work.
far from perfect 😂 but okay!
You are an artist at repairing and restoration.
It is a genuine pleasure to watch you work.
Absolutely amazing! Great job.
What a beautifully built drill press, and amazing restoration. I would be so proud to have that in my shop. 👍. Well Done
bringing machinery back from the dead is somehow magical.
In addition to a machine being functional, it should also be beautiful. This one is wonderful. Thank you.
That will outlast all of us, our kids and grandkids. Excellent quality
Outstanding restoration cobba, love the effort, time and care you've taken to restore this old beauty. I'm subscribing, can't wait to see what you come up with next. 👍
That's a really nice piece of machinery. I love the old 50s asthetic
Repair&Restoration is very professional or good channel good luck 👍 👏
Beautiful restoration . Well done sir.👍
Beautiful piece of machinery. Good job
Hai fatto un buon lavoro di precisione! Bravooooo!
Your best restoration yet!
You put a lot of time and effort into this. Nice work.
Beautiful job. Attention to details are incredible
Beautiful restoration!!
Nice restoration…other could learn a lot on how you did this…the right way !
Hello mister beautiful restoration beautifully restored
You should be very proud of that. That is a very nice job. Keep up the good work.
Ha ha ! I was just saying that I loved the plastic parts when you began making new ones !
Bardzo świetna jest ta wiertarka kolumnowa pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍
Tequedo muy bien, una pregunta que líquido le pones a la tina de ultrasonido. Saludos
Really lovely restoration, I have done a few myself. What would be really handy is a list of equipment and processes, especially for things like the way you did the etching of the scale, I'd love to know what you were using.
Brilliant work and restoration friend, have a nice day !!!. 👍👍👍
Beautiful Job, thanks for sharing.
Awesome resto, great job!👍🏼
Wow, that's high level stuff. That etching process looked like magic to me.
Good Job! Greetings&Best Wishes!
A real master, respect👍
Well done, sir. Absolutely amazing restoration. The video production was equally good. I have a very similar drill press made by Delta in the 1950s which I have restored, but not nearly as well as the job you did. I've subscribed.
Fantastic restoration!
Great job. Gorgeous color. What color and paint were used?😊
Beatiful drill press very nice
First time I've seen someone using the etching process that usually are for revealing PCBs to etch a number scale. Very cleaver.
Impressive as always,keep doing what your doing and carry on.👍👍👍😎😎😎
beau travail avec des démontages explicites merci de partager
Отличная реставрация!
Привет из Беларуси! 🇧🇾
some really great work there,,, liked it very much!
Лучший спасибо за потраченное время!!!
Super job my friend 👍🇬🇧
Beautiful Lil drillpress
Отличная рестоврация))))) Просто шик!)))))
Q maravilla q oficio y matriceria tenes c la restaurast genial desde buenos aires
Beautiful saved it from being scraped 👍
Vc está de parabéns 👏👏👏👏👏👏
I'd be proud of that, well done.
Fantastic restoration
This is a very strong machine. I love to have one.
Well done! That looks really nice, than you for taking time to film, edit and post this video. Liked and subscribed.
That is an incredible video 👍👍
Absolutely beautiful.
Beautiful machine!
Bardzo pięknie. Jaki to nr. Farby, jak ja zrobiłeś ,?
Pozdrawiam serdecznie.😊
Awesome work. Could you do video outlining how to plate metals?
It looks good, what color did you use?
Maravilhoso trabalhar amigo❤
Very nice! Can you share any details about the dial etching?
Parabéns, um excelente trabalho
You made good job 👍
Gorgeous!
I think I seen 5 but how many layers of paint did that base have on it??
Excellent looking restoration and you did a wonderful job restoring it yourself!!!
Enjoyed your video and I gave it a Thumbs Up
Love it. Great job.
Very good and perfect.
Las máquinas antiguas siempre tienen más calidad 👍
Very pretty little machine . I would to find the same.
Great Job
You should’ve done the sand blasting before the grinding, and welding the base!!
Good job.
What made is it please?
It was awesome!
Nice restoration.
Excellent restoration - That small x-y table attachment will allow you to use this small
drill press to do some very light milling work.
Risky - the bearings in the spindle aren't made to take side loads, only axial ones. But the X-Y table will allow the drilling of accurately located holes.
Excellent work.. if you don't mind, I'm going to ck out a few more of your videos... Take care my friend...
Great job.
very nice work, Subscribed ;-)
Wonderful !!🧨
your drill press looks great! btw when you did install the super fast Indian noise that plays when drill? whatever that noise is , it sounds like the cheif trying to stop an earthquake solo
Very well done indeed.
Splendide!
在B站看到你视频，油管又刷到了，加油，难得有输出的不是搬运的
Amazing bos👍👍👍👍👍👍👍👍🇲🇨🇲🇨🇲🇨
Nice..
pretty spiffy!!!
Nice video
Neat job!!!
❤ wonderful