Honeywell T4 thermostat installation
Вставка
- Опубліковано 5 вер 2024
- In this video I show you how to remove an old T87 honeywell thermosat and install a T4 honeywell thermostat with heat only application.
HTTPS://WWW.SHIELDHVAC...
LRAMIREZ@SHIELDHVAC.COM
www.honeywellh...
Where can I find the decorative plate you put on the UWP device at 5:42? Mine didn’t come with one.
Buy a tripod. You might actually get it too focus.
I had go pro may go back to it
Loved your video on adding a C wire with a relay to a Taco panel. I used that method to work with a Honeywell T9 and worked like a charm. Thanks.
Do you guys have any experience with the Honeywell T9? My HVAC is a 3 zone and have a new Honeywell HZ 322 panel. But one of the zones only have R, W and Y wire to it. And there is no additional wires. So according to Honeywell their C-Wire adapter doesn’t work since I don’t have a G wire. Any suggestions. Would I be able to add a relay like the one you use in the video about Nest and Taco?
Hi there thx for watching. I've installed a couple of the T9 tstats. I read the manual over again. I am not aware of any application that will allow there T9 to work with 3 wires. I will call honeywell also to double check. I'm pretty sure you will have to run another thermostat wire from thermostat to zone panel.
@@shielduniversity419 Thank you for the follow up. Was able, with some luck to fun a fourth wire that I can use for the C wire. So fully functional.
Do you know a wifi enabled Honeywell thermostat for electric baseboards. Can run a C wire, but the new ones only seem to work with Steam or Hot Water.
@@oliverbork2627 haven't used a wifi tstat for electric baseboard. Usually they are line voltage
You're not telling us what the choices are when programing it. Plus it was sideways.
Its in the manual. Lmk what questions you have instead of complaining about it
way shaky video