Very happy with the light bar, and this video is greatly appreciated. I would like to share a few comments regarding the installation. First, why provide 20 feet of cabling when the distance from the light bar to the battery is less than six feet? It just makes it difficult to stow all that extra cable. Second, what is the point of the IP68 connector? Why not just use one straight cable from the light bar to the battery? Third, it's much easier if you remove the cover above the radiator. That allows you to reach down and grab the cable, and it also allows you to route it so it's more hidden. Last- my kit did not come with the "t-tap" connecting module shown in the video. The connector supplied in my kit was useless as it was not large enough to fit on the Ford upfitter wire. I made it work with something I had on hand, but I just wanted to let you know. Keep up the great work!
Hey there Rob! Thanks so much for the kind words, support & great feedback! We provide extra length on our harness to give flexibility to those installing their Paladin in differing locations. There are several reasons for the harness not being hardwired to the bar itself, one being that most installations etc are easier without having a full harness connected at all times. Great tip on the top cover and we apologize about missing connector, let us know if we can get you one asap! Thanks again for the support, we look foward to serving you again soon!
Interested in picking this kit up for my 2024 F250 Platinum. Question - Do you have a guide on how to tie this LED bar into the wiring/relay for the high-beams? Intent would be to have the LED bar turn on anytime I turn my brights on. In addition to that, I would like to maintain a connection to the upfitter switch. Is this feasible, if so, do you have an official guide or recommendation? Thanks!
Hey there! The tab is no longer needed and breaking it away makes it easier for routing the bolt back through the bumper for the bars mounting hardware. Thank you for your support and for being a part of the F150LEDs family! We look foward to serving you again soon!
Hey Street! Zero rusting issues what so ever. You can add some corrosion prohibitor spray etc around the drill points for further piece of mind if you live in a highly corrosive environment. We hope that helps, thank you for your support, we look foward to serving you soon!
Hey Matthew! You can find that using the link below. We will have a video on it coming soon too! www.f150leds.com/collections/2023-f250-super-duty/products/2023-ford-f250-super-duty-20-paladin-90w-curved-lower-intake-led-bar Please let us know if we can help further, we look foward to serving you soon!
Hi there! @150w & @ approximately 12v you are looking at approximately only 12.5 amps! Incredibly efficient & bright! Thank you for your question, we look foward to serving you soon!
Hi there! We have a bar custom to your 23 raptor that can be found using the link below www.f150leds.com/collections/2021-2023-f150-raptor-leds/products/2021-2023-f150-raptor-44-paladin-210w-curved-cree-xte-led-bumper-bar Thank you for your support, we look forward to serving you soon!
This 2023 Super Duty 150w CREE LED Bar can be found at the link below www.f150leds.com/collections/2023-f250-super-duty/products/2023-f250-super-duty-paladin-150w-curved-cree-xte-led-bumper-bar All of our 2023 Super Duty products can be found using this link www.f150leds.com/collections/2023-f250-super-duty We look forward to serving you, thank you for your support!
Great to hear it was helpful! Yes sir it will indeed work on your 2024 F350! Please let us know if we can help further, we look foward to serving you soon!
Very happy with the light bar, and this video is greatly appreciated. I would like to share a few comments regarding the installation. First, why provide 20 feet of cabling when the distance from the light bar to the battery is less than six feet? It just makes it difficult to stow all that extra cable. Second, what is the point of the IP68 connector? Why not just use one straight cable from the light bar to the battery? Third, it's much easier if you remove the cover above the radiator. That allows you to reach down and grab the cable, and it also allows you to route it so it's more hidden. Last- my kit did not come with the "t-tap" connecting module shown in the video. The connector supplied in my kit was useless as it was not large enough to fit on the Ford upfitter wire. I made it work with something I had on hand, but I just wanted to let you know. Keep up the great work!
Hey there Rob! Thanks so much for the kind words, support & great feedback!
We provide extra length on our harness to give flexibility to those installing their Paladin in differing locations. There are several reasons for the harness not being hardwired to the bar itself, one being that most installations etc are easier without having a full harness connected at all times. Great tip on the top cover and we apologize about missing connector, let us know if we can get you one asap!
Thanks again for the support, we look foward to serving you again soon!
Great video and product! I like the new set
Thank you sir! 😎 We strive to keep improving!
Interested in picking this kit up for my 2024 F250 Platinum. Question - Do you have a guide on how to tie this LED bar into the wiring/relay for the high-beams? Intent would be to have the LED bar turn on anytime I turn my brights on. In addition to that, I would like to maintain a connection to the upfitter switch. Is this feasible, if so, do you have an official guide or recommendation? Thanks!
Has anybody figured a different way to mount this light instead of drilling into our bumper?
Thanks
What is the purpose of breaking the tab off on the black plastic moulding?
Hey there! The tab is no longer needed and breaking it away makes it easier for routing the bolt back through the bumper for the bars mounting hardware. Thank you for your support and for being a part of the F150LEDs family! We look foward to serving you again soon!
Nice watch! I have the same one. 👍 Nice product too. Will this work on a 2024 Limited? Currently waiting on mine to be built.
Thanks Tony =) ! Yes it absolutely will work on your 24 limited! We hope it is built soon & look foward to serving you once you get it!
How does the chrome look after a couple months. Any rusting?
Hey Street! Zero rusting issues what so ever. You can add some corrosion prohibitor spray etc around the drill points for further piece of mind if you live in a highly corrosive environment. We hope that helps, thank you for your support, we look foward to serving you soon!
What about the lower light bar?
Hey Matthew! You can find that using the link below. We will have a video on it coming soon too!
www.f150leds.com/collections/2023-f250-super-duty/products/2023-ford-f250-super-duty-20-paladin-90w-curved-lower-intake-led-bar
Please let us know if we can help further, we look foward to serving you soon!
How much is the amp draw for these lights?
Hi there! @150w & @ approximately 12v you are looking at approximately only 12.5 amps! Incredibly efficient & bright! Thank you for your question, we look foward to serving you soon!
Does this bar fit a 2023 Raptor?
Hi there! We have a bar custom to your 23 raptor that can be found using the link below
www.f150leds.com/collections/2021-2023-f150-raptor-leds/products/2021-2023-f150-raptor-44-paladin-210w-curved-cree-xte-led-bumper-bar
Thank you for your support, we look forward to serving you soon!
will this kit work on a 2025 model year?
Yes sir it will! Thank your for your support, we look forward to serving you soon!
Where do I get this bar?
This 2023 Super Duty 150w CREE LED Bar can be found at the link below
www.f150leds.com/collections/2023-f250-super-duty/products/2023-f250-super-duty-paladin-150w-curved-cree-xte-led-bumper-bar
All of our 2023 Super Duty products can be found using this link
www.f150leds.com/collections/2023-f250-super-duty
We look forward to serving you, thank you for your support!
This video was very informative. Will this light set up work on a 2024 F350 with up fitter switches as well ?
Great to hear it was helpful! Yes sir it will indeed work on your 2024 F350! Please let us know if we can help further, we look foward to serving you soon!
Are these bulbs DOT approved?