Great video, thanks for sharing. How much room is left between the end of the gray water tank after repositioning and the far side of the trailer? I am thinking maybe a small, 2kw Diesel heater could fit into this space, with duct into the bathroom and maybe kitchen. Could maybe use the flush cap to run a hose to refill the Diesel tank. Thoughts?
If im understanding correctly once the grey was rotated and shifted to the door side of the aluminum skid cover i did place the diesel heater beside it but still within the main frame of the trailer. With it located there the shower wall goes from 1 Deg C @ minus 10 Deg C to a plus 10 degrees. As well it heats the floor as the first vent is between the grey and drinking on the door side. This also follows most of the water lines as well. The final vent is located at the back side of the general tank. I also have diesel heater inside in the bench closest to the bed (note victron 3000 inverter moved) to that does nice job of heating main area to bathroom especially since it also is diced into the bathroom. Yes that would work i think to fill from flush as there would be enough room to but an aluminum tank in that space. I have put 17 gal tank in front of the trailer ahead of the General water tank (which tucks in slightly tighter then the grey and doesn’t impede front angle. Let me know if that answer your question..
@@iSeaUnplugged Ah, yes thank you - I did not fully appreciate the way you did things the first time I watched. If I understand correctly your gray water exit valve is on the door side of the trailer and the Diesel heater is on the other side of the gray water tank, essentially under the shower (genius move!). This might also work better for me because I can go from a thin fuel tank fed by the door side flush hose port over to the Diesel heater on the other side of the tank (like you, want to maximize departure angle). They have a further deal on HLN heaters for Black Friday.....hmmmm.
Great video, thanks for sharing. How much room is left between the end of the gray water tank after repositioning and the far side of the trailer? I am thinking maybe a small, 2kw Diesel heater could fit into this space, with duct into the bathroom and maybe kitchen. Could maybe use the flush cap to run a hose to refill the Diesel tank. Thoughts?
If im understanding correctly once the grey was rotated and shifted to the door side of the aluminum skid cover i did place the diesel heater beside it but still within the main frame of the trailer. With it located there the shower wall goes from 1 Deg C @ minus 10 Deg C to a plus 10 degrees. As well it heats the floor as the first vent is between the grey and drinking on the door side. This also follows most of the water lines as well. The final vent is located at the back side of the general tank. I also have diesel heater inside in the bench closest to the bed (note victron 3000 inverter moved) to that does nice job of heating main area to bathroom especially since it also is diced into the bathroom. Yes that would work i think to fill from flush as there would be enough room to but an aluminum tank in that space. I have put 17 gal tank in front of the trailer ahead of the General water tank (which tucks in slightly tighter then the grey and doesn’t impede front angle. Let me know if that answer your question..
@@iSeaUnplugged Ah, yes thank you - I did not fully appreciate the way you did things the first time I watched. If I understand correctly your gray water exit valve is on the door side of the trailer and the Diesel heater is on the other side of the gray water tank, essentially under the shower (genius move!). This might also work better for me because I can go from a thin fuel tank fed by the door side flush hose port over to the Diesel heater on the other side of the tank (like you, want to maximize departure angle). They have a further deal on HLN heaters for Black Friday.....hmmmm.