SHARK LURE CHALLENGE (impossible)😦🔥
Вставка
- Опубліковано 28 вер 2023
- I can't believe this shark swim bait lure didn't perform good! I had high hopes for this massive bait I found in hobby lobby, but I think this fishing challenge is impossible!
Don't forget to hit that "Subscribe" button and ring the notification bell to stay updated with our exhilarating fishing expeditions and outdoor escapades. - Розваги
Make sure to subscribe for more fishing challenges!
Please paint to look like a white shark
Add a lip to make it go deeper
Coat it with resin to give it a smooth finish, also adding more hooks that are much bigger, (octopus hooks)
I think you need to attach from where you put the line that goes to your rod, a bit lower on the shark maybe in the mouth
You should put bigger hooks on it, more weight, and maybe a lip
Yeah I was going to say a lip to
You need to add more hooks and bigger hook also try to put some lead weights into the head of the shark
Yes I was gonna say that
Why would he do that it’s to big anyway
And put some scent on it
Oooooh dont go to hobby lobby brudda
See if you can take out some of the segments. I bet it will run smoother.
Put in each fragment a weight, should help a lot
All you need to do is cut out some of the sections, water can't get in between ,you need that "resistance"
So many comments about adding weight, this is absolutely what needs to be done, add a little more space and the turns will be much wider
Stick a spoon horizontallly perpendicular to its tail, so water bashes on it and makes it move
Maybe add a lip to it or a few things on each side of the tail to catch the current.❤I love your stuff tho bro keep it up❤Jesus loves you
I think you need to attach from where you put the line that goes to your rod, a bit lower on the shark maybe in the mouth.
You should do video of the winners of your past videos
Use a shark rod so you don’t break your other rod
That’s sick
Make the cut parts in the middle bigger so it wiggles more. That will definitely help and add bigger hooks for sure.
A lip would cause the head to shake back and forth, in turn making the body follow. It will also make it dive a little in the water
Bigger hooks plus a lip would be nice
Paint it neon like a spoon luree
You should try to make it bottom heavy
get bigger hooks (4/0 or 3/0), a strong musky rod, 40lb braided line on it, 1mm thick footlong fluorocarbon leader. Coat it with superglue to not get it waterlodged. Make a polycarbonate dive lip too.
You should take some of the little sections out, so it has better action
Drill little holes in the bottom and then put metal in the bottom and glue and seal it so it won’t be so top-heavy
Lead in the bottom with glue and soda, the soda acts as an activator. It’ll stay uprights. Learned from Marling.
Average bluegill bait
put a few split spots in the head section
Maybe a diver on the front so it sinks?
Why you dont put gray paint
Put bait on it 😂
Make it a Plopper💥
Might be hard to add weights but bigger eyelets and trebel hooks might do it
I painted one actually
You got to ballast it.
Bigger hooks then dill several holes at the front and back and put some split shot or lead in it
You could put weights and n the bottom to keep it up right
You have to take out a couple of segments
Drill holes on the top so there would be air and then it will stay up right
Couldn’t find smaller hooks? Sheesh!
MAKE IT INTO A CRANKBAIT😂😂😂😂😂
Make it less heavy,lighter,shave the joints down a little,and bigger hooks.
Paint it put more hooks and some led in it to help it sink so you get the movement and then I think it should be a good one.
Cup little chunks out for more movement
Might want to put weight on the bottom to keep it up right
Put a bill on it 👍👍👍
It needs a lip and it'll swim..... maybe a weight in the bottom front behind the lip so it submerges a bit
make a little crank thing in the front for the movement and make it out of a soda can
Cut the segments to make them actually angular and it will run
Try adding a very small lead weight to the bottom, so that it will be constantly tilted upright, since the buoyancy of the woods and the weight of the lead counteract each other
Put a another screw eye and then put a bell wait on that screw I will help it sink and it’ll help keep it straight
Put lead weights in it
Maybe trim the wood to let it wiggle more
Its top heavy which is why it keeps fliping and not swiming properly
make the slits in the wood bigger and the hooks bigger
Needs weights on there somewhere, maybe a lip to get it to dive and stay on path
Put weight on the bottom to keep it upright then put a vertical lip on for some resistant than you should be there
I had this idea like years ago when I was like 10 cause I had 1 of those and I thought "what if I put some hooks on it"
Add lead in to the wood
Center the front line tie
You need to cut some of the segments out of it so it Wiggles more cut the fins off start there
Maybe realistic color for like yellow or someting
You need a blade on the front like a hitter bug
Lip! just add a lexin polycarbonate/acrylic lip on it. Check out the marling baits snake lure for reference.
Video with it?
Make bevels between segments so it has more space to move, and maybe use like a belt sander to profile the body a little wavy.
Maybe a bill to keep it all the way underwater?
Put wait on bottom of lure
Add more weight so its just below the surface and paint it a little
Yes do the snake 🐍!!!!!
You may want to get some whittling knifes and cut down the slits a little to give it more action
Bigger hooks, paint it silver and black and remove every other segment
Get some big weighted treble hooks and put on there.
NEVER BACK DOWN NEVER WHAT!!!! Never give up
NEVER GIVE UPPPP
Needs a big polycarbonate crankbait lip or else it won’t wiggle
Color it black on the top and white on the bottom
Paint it light colors or chartreuse and maybe add bigg hooks and lip
A sinker?
Try putting the screw eye in on the top of the head
Make it into a jitterbug
Put a bill on it
You should shave the tail were the middle part is in more into it. In the end of the tail very end is like a hammerhead, then put that tail to look down words.
It needs weight in the belly of the head. Drill out a quarter inch hole, and put birdshot in there. Then use super glue to have it stay in. Or, if you have any lead you could mash into there would work better.
no fish will eat the wood, they will bite to see if it can eat or not.
Cut a little bit out of the segments. Too much weight and it Needs to load the weight evenly as you reel in to create the action. so the front is more load bearing, back end should probably have some sort of lip like a crank bait to give more action. You might think I’m tripping but if you cut out a little bit of those middle segments you’ll have a much more properly weighted swim bait
Put the little plastic piehe to the mouth to help it sink
Try putting a squarebill on it
Turn the fins into blades for action!
Make a Lego lure
Wait the nose or cut it to create a crankbait angle
A bull maybe 😊
More weight and like make it swim steady
Add a lip on it kinda like a crank
Mabye it needs some painting? ❤
Everything can be worked out everything just haha to be on the level or there will be doubts on q side or the other make sure that damn shark knows your gonna keep him clear coated and taken care of
Put weight under for stabilizate. And you will see.
Put a bill in its mouth for it to glide
Put some weights in the bottom, it keeps flipping over and floating. If all else fails put a lip on it
Make it a popper
Put lead in it
Add weight in the belly and bigger hooks
Paint it blue
Because it’s just floating
Put a lip on it from a crank bait