Thank you for your informative video. I have been searching all over for this information. I recently got a singer 66 like yours for free. Ive never sewn a day in my life but this old machine calls me to use it. Your video has helped me navigate this unique and forgotten skillset. Thank you very much!
Inherited a 1948 Jk electric singer from my Grandmother. Was told it did not work. Plugged it in the other day to find, it needs just a service. Since these are the most simplistic machines to service and repair. Learning on this one. The I will learn about doing my Pfaff. Appreciate these types of videos more than you know. Thank you.
Hi scrapinmaniac corner, you're doing fine and you're absolutely right in not taking these machines apart any more than you need to in order to get access. Only when rebuilding machines there's a need to do so. Great video!
Nicely done. I recently discovered a very effective, non-volatile cleaner and degreaser that I have found has replaced many of the solvents I have used all my life. Klean Strip Green Paint Thinner is an environmentally friendly cleaner, solvent, rust remover, and paint thinner which is also nice to work with. No odor, no unpleasant feel or attack on skin. I've used the milky white product to clean filthy machinery, heavy grease on our kitchen vent hood, gun parts, car door hinges, and of course, old sewing machine oil buildup. My wife has found many uses, too. And it's inexpensive, at just ten dollars for a whole gallon. You might like it for your hobby!
Knowing almost nothing about sewing machines, new or old, I found this very helpful and informative. I recently came into possession of one exactly like this, and tomorrow I will begin this process. Thank you.
I just picked up my Christmas present Singer 15-91 March 3, 1952 yesterday from a man who use to work for Singer and repair Singer sewing machines. I have all new wiring and motor therefore, he told me it just as being in 1952 and it will outlast my life span. I adore my Ginny and it sews lovely and the stitches are beautifully by increasing the tension thread. I also did darning free motion using a hoop and I was amazed how well it mended the fabric together very nicely. I am a very happy camper and thanks for all your tips on cleaning the vintage Singers. Also, you can purchase a cream cleanser and blue polish from a company that sells that for the vintage Singers. great video
Thank you so much for creating this video. I have been researching for hours after obtaining my first singer from a great aunt. It's still in great working condition and this video showed me everything I needed to get it cleaned up and running smooth!
Jennifer Lillemo Please please please don't use paint thinner to clean your machine. Singer recommends you use kerosene. I felt like I was watching a horror movie when she said she was using paint thinner. You don't want to ruin the finish on your machine. Sewing machine oil is used on the finish/paint to clean dirt and dust, then use a good polish to make your machine shine.
Good stuff! One more thing that probably could of used a good cleaning and oiling was inside the hand-wheel. Apparently over time it can get pretty gunky in there and cause the stop motion wheel to stick when using the bobbin winder. I just got myself an old Singer 66, and just love the solid basics of these well built machines. Thanks for all the helpful cleaning and thread tension tips! 👍😊
So very helpful. I am working on cleaning a 66 and your demo is making my work so much easier especially how to get the bobbin plate to stay in place. Thank you!
I know this is a very old video, but I still wanted to say thank you! This was incredibly helpful, as I'm about to go look at a Singer 66 tomorrow. You gave me really good pointers as to what to check for etc. And now that I've seen you clean and oil the machine, I've gained more confidence that I'll be able to do it, too. Fingers crossed that it's in reasonable condition. Thank you again!
If you go to bob fowlers channel, he has video of a complete rebuild of the 66 , very good videos if your looking to get it running perfect . Good luck .
I used googone and sewing machine oil for routine cleaning! I use Howard's feed & wax wood polish and wax for buffing and polishing my machines. Works like a charm every time!
Great video with lots of effective tips. Instead of steel wool & solvent you can use a scotchbrite pad & WD 40. Cleans almost anything and doesn't scratch or eat paint with harsh chemicals.
Lori, I hope that you get your 1947 Singer Model 66 sewing again. I love the clackity-clack sound of the Model 66 and 99. I believe that 1947 Model 66's have a numbered upper thread tension assembly and stitch length lever with back tack.
Lori, Be aware that your 1947 66 originally had a solid balance wheel (which some people call hand wheel). The belt size for a solid balance wheel is different from the belt size for an original Singer 9 spoke, 5.5 inch balance wheel. The 9 spoke balance wheel would not have been original to your electric motor driven 66 machine unless it was a treadle or hand crank machine in the past and then converted to electric motor. I love the looks of the spoked balance wheels. Plus I have the option to use the machine as electric motor, treadle or hand crank. Rain Noe of The Vintage Singer Sewing Machine Blog concisely explains about the Singer spoked balance wheels. vssmb.blogspot.com/2011/07/look-at-spoked-handwheels.html#more
Thanks for the video. It’s well done and will help with my recently acquired singer. I just got it last night, I don’t even know the model. I particularly like the use of voiceover during the high speed sections.
Great video. I too would not gamble on paint thinner to clean any vintage sewing machine. Form what I've read, kerosene is your best bet as it won't harm the decals. I love the story of how you got hooked on these old machines. My obsession started with inheriting my Mom's old 66. It's a back clamp machine, so it goes back pretty far. My mom loved that machine. My dad had bought it for her, used. They were married during the depression and didn't have much. When she had to leave her home, I just couldn't see that sweet old treadle machine that my mom treasured, go to a dump or get turned into an end table. So, I had it moved to my house 400 miles away. I fell in love with it and it's my machine of choice now, tho I've added a number of other vintage Singers to my stash.
Thank you for watching. I agree, these old vintage machines can't be beat. I know the newer ones have fancy stitches but most of the time, I am just doing straight stitching.
Ty for your help...got her belt and got it goin...However old sassy keeps getting the top thread jammed around the bobbin...Also just bought is 1897-1905 White Rotary treadle machine :)
Hi there, The issue may be the threading. Make sure you have thread the upper thread right and also some machine have the eye of the needle facing sideways and some you thread the needle from left to right. I had a machine i was reconditioning for a friend that was causing a fit with the tension and not catching the thread. I went on line and found the manual. Rethreaded the machine and it finally sew the perfect stitch. My sewing shop here is very helpful, maybe take it to a place you trust and have then help you figure why it is jamming. I hope this helps!
Tip when the feed dogs are not working on these old Singers.. There is a knob under the machine that when loosen will drop the feed dogs for free hand embroidery
This was very interesting and helpful!! I have an older singer,In a wooden cabinet and it has the knee thingy. It was my grandmothers. It need a good tune -up cleaning. TFS
I would get it cleaned and oiled. These vintage machine in my opinion are 100 time better than those plastic machine out there. Just be careful with the decals. I learn to use mild cleaning solution so that the decals don't fade. Plus I also learn to use car wax for the body after you clean it. It will bring back that beautiful shine. Good luck with that machine!
Kim Miller The knee bar is connected to the foot pedal. Look under the machine, the foot pedal is in a holder that the knee lever pushes. If you want to use your knee to sew, that's up to you but if the machine motor runs with the knee bar that means the foot pedal is right at the end of the knee control, take it out of the holder and you can use it as a foot pedal.
Love this video, I have this exact same machine ,I have mine all polished up and looking great ,re stained the cabinet ,My question is what is the part # or what drive belt would work on this ? mine is dry rotted ,Thank you for the great informative video !
This is a very helpful video. Thank you for taking the time to make it. I received a model 66 yesterday and the wheel turns, motor runs, and light turns on but everything else is frozen. Took things apart like in your video, cleaned, oiled. Still no go. (Anyone have a suggestion on what else I could try?) I'll keep at it, but this video I'm certain I'll be coming back to. Really like the part about what to look for when buying one.
I hope your machine is running by now! Keep at it with oil and trying to turn it. Get really into the crevices with a paintbrush and make sure everything is coated and give the oil time to sink in. Once it is moving, keep oiling until it is moving smoothly. If it's badly rusted, you can use more severe chemicals like kerosene/antisieze. These machines can get beat up, but are pretty hard to kill and are designed to last several lifetimes
Nice video. Do you have any tips on how to clean the vintage accessories that come with the 66, ie: sewing feet? I have recently bought a singer 66 and all the accessories have rust on them. Thank you for sharing.
First it was frozen, i cleaned it and oiled it. The it was starting to sow but the tension was not quite right. I thought i was almost there. Then it froze completely. There was a lot of lint/ yarn dust in the bobbin holder in the machine and i tried to remove it. I think it’s need a service but it’s so expensive 😢. I’m really disappointed. The machine shines and the cabinet is fixed beautifully and the threadle and bobbinwinder are working. Does anybody have a suggestion how to get this old machine moving?
Wonderful! I bought a Singer 66 1946 (with the little table) and cleaned the machine and oiled it up. Thread needle catches the bobbin thread and loops it up through but when sewing it doesn't make stitches. Will be watching this and others to figure it out. Hopefully there is a manual online for this type. Thank you for posting this video and with the subtitles enabled :)
Heather Martin I hope you get it working. I would see if you have the needle backwards. Here's the manual for that machine, ismacs.net/singer_sewing_machine_company/manuals/singer-model-66-sewing-machine-manual.pdf. Hopes this helps!
A frozen machine would mean that it hasn't been used and lots of oil will usually do the trick I wouldn't shy away from a vintage machine due to it being frozen, my husband rewires all machines for me if needed so that's not a problem either. Other then that you covered lots of basics, I've been servicing machines for over 5 years now. Bobbin tires, bobbins and belts are not a deal breaker for me those are easily replaced. Thanks for sharing! 👍🏾
Jacqueline's Home & Soul hello Brenda St CLair here I have a 211w151. Can’t find a tutorial on this machine. Could you possible guide me to find one. Want to try to upholster my first piece
Brenda St.Clair I've never seen or heard of that machine before sorry I couldn't be of better help to you. I hope you found what you were looking for. Happy sewing!
FreeStyleFox disassemble your hand wheel assembly, I usually find old oil and gunk stuck or it's usually very dry in that location and that's why it's stuck and won't move freely. 👍🏾
Boa noite,essa singer de laçadeira apollo antiga de 1924,tem uma lavanca que levanta a bobina na hora de tirar é muito boa importante e útil se as de novo modelo fosse assim seria muito prática,parabéns essa eu conheço.
@@LaceyMyriah the stitching is all over the place!! i think its more me then this old girl. otherwise she runs like a gem. she ran like a gem before the battle. fixing and cleaning is more my speed, fortunately all she needed was a power cord, a foot and some needles. she is from the 20's/30's. no foot peddle. her speed control is with the knee.
Singer Model 66 was introduced at the turn of the 19th to the 20th Century in 1900. Singer deemed it THE Sewing machine of the 20th Century....These early Singers were small examples of the Industrial Revolution.....and the key to keeping these machines working was OIL...NOT 4 in One !! Use good quality sewing machine oil like Singer, Lily, or Zoom to name 3...Four in One oil leaves a dark varnish based residue...You can see it on vintage machines which were lubricated by 4 in One .Singer was always and is a pure oil ...I also like synthetic versions like Tri-Flow and Liquid Beaings. Read your manual on where to oil and how often. In fact the finish on old Singers was made to be cleaned using Singer oil....then you're decals will be safe..
Hello!! I just bought a 66 singer sewing machine yesterday! I found your video helpful! thank you! I do have a question, where did you buy the belt? I think you said you bought a 15 black belt. Please clarify which belt you bought and where you bought it from. Thanks again!
Thank you for posting this. There are 2 small additions I would like to add to this video. One is how to remove the bobbin cover. The rounded piece with the 2 screws comes out first and then the rectangle piece slides towards the machine (not out from it) where the rounded piece was. It can then be pulled up and out easily. This will protect the small spring hold down from breaking. You will see a groove that is on the underside of the rectangle piece which is what holds it onto the flat metal spring. One other missing component is the "red felt" up against the bobbin track by a spring for oil. Next to the bobbin release button is a small spring that is supposed to hold a small piece of felt against that track. This felt is oiled and keeps that track lubricated and should be re-oiled from time to time. I can see the round spring that holds the felt but in this presentation there is no felt in it.
Richard Nordenberg thank you for the info. I need to look for that felt for the bobbin. I definitely love these old machines vs the new ones for regular sewing and mending. I like the newer ones for embroidery and fancy stitching.
Good video. You mention that screw that holds down the horizontal bar that sits over the bobbin casing. Do you know how to reset the position if one has to loosen the screw in order to lift the bar up and move counter clockwise to get the bobbin case out? I just bought a 66-18 for $20 and during my first cleaning and oiling I had to loosen the screw on that horizontal bar to get the bobbin case out to clean the dust from the area.
i have a 1931 singer.. i did some oiling and cleaning but it is hard to turn the handwheel.. i lessen the tension but then the needles doesn't move... i oiled underneath also ... any other ideas what it could be?
I'm restoring my old 115 right now. My needle didn't move either. I took out the bobbin case and shuttle and it moved so I know the problem was in the bobbin area. I also took the face plate off and lubed the needle shaft/pin. I'm now putting it back together so I'm hopeful.
I have exact machine. my problem is the motor controller, the problem is part of the wiring has material wrapping and it is worn out. I would like to know if I can replace it.
Hi there, you can replace the motor, here's a link , www.sewingpartsonline.com/search.html?keywords=Singer+66+motor, I usually just buy a new motor if it not working. You also can put these machines on a treadle.
Maria, The wiring of your foot controller can be replaced. It would be easier to replaced the motor, foot controller and wiring but I prefer the original Singer electric motors. Check out "The Vintage Singer Sewing Machine Blog" by Rain Noe. The tutorial on rewiring a Singer 99 is identical to rewiring a Singer 66. vssmb.blogspot.com/2012/04/reader-questions-rewiring-99.html The other parts of the rewiring tutorial are about Singer 201-2 potted motors but the instructions are helpful for any sewing machine.
Hi Bessie, I am not an expert with repairing these machines but I once helped someone fix theirs and they had the same problem. Because we did not have the manual, we threaded the machine wrong (the needle was inserted backwards) and I threaded the needle wrong. The needle has a curve on the back of the eye. That slight curve is what allows the bobbin hook to catch the thread when the needle penetrates the fabric, and creates the knot as the bobbin thread is captured on the upper thread on it's way up. The timing of the bobbin hook and when the needle is down needs to be precise. However, most often the issue of the bobbin hook not catching the thread is due to improper needle position on machine or improper threading. Make sure its threaded correctly. If that is not the case, without threading the machine, manually move the needle while observing the bobbin area and see if the bobbin hook is meeting the back of the needle (shank) at the right moment. If timing is off , I would take it in for repair. But if it's a machine you have is for learning how to repair sewing machines, you can search on sewing machine timing and see if you can repair it yourself. Good luck!
I don't know but I get the screw drivers from a sewing service and fabric store. They usually sell a set of screw drivers for any size .of screw you find in sewing machines..here's a link to a nice set, amzn.to/2oxZCwR
Your machine is threaded wrong. The thread goes around the discs, through the checkspring, under the guide beside the tension, UP THROUGH THE THREAD TAKEUP LEVER, down through guide on faceplace, then down to needle.
Michael Thomas , hi there, I do this as a novice. I refurbished 6 machines for myself and gave some away as gifts so like any skill one acquires , you have a learning curve you will need to overcome before become an expert. I thrive on learning new skills and refurbishing vintage machine it’s just one of many skills I am learning to do. Thank you for watching.
Lol you never want to do this to a modern machine she says , of course not , you just take it to the dump ha ha ha , nobody saves plastic crappy machines do they?
Thank you for your informative video. I have been searching all over for this information. I recently got a singer 66 like yours for free. Ive never sewn a day in my life but this old machine calls me to use it. Your video has helped me navigate this unique and forgotten skillset. Thank you very much!
Inherited a 1948 Jk electric singer from my Grandmother. Was told it did not work. Plugged it in the other day to find, it needs just a service. Since these are the most simplistic machines to service and repair. Learning on this one. The I will learn about doing my Pfaff. Appreciate these types of videos more than you know. Thank you.
Loop
Hi scrapinmaniac corner, you're doing fine and you're absolutely right in not taking these machines apart any more than you need to in order to get access. Only when rebuilding machines there's a need to do so. Great video!
Nicely done. I recently discovered a very effective, non-volatile cleaner and degreaser that I have found has replaced many of the solvents I have used all my life. Klean Strip Green Paint Thinner is an environmentally friendly cleaner, solvent, rust remover, and paint thinner which is also nice to work with. No odor, no unpleasant feel or attack on skin. I've used the milky white product to clean filthy machinery, heavy grease on our kitchen vent hood, gun parts, car door hinges, and of course, old sewing machine oil buildup. My wife has found many uses, too. And it's inexpensive, at just ten dollars for a whole gallon. You might like it for your hobby!
Knowing almost nothing about sewing machines, new or old, I found this very helpful and informative. I recently came into possession of one exactly like this, and tomorrow I will begin this process. Thank you.
Very simple information. I re pair also and and these advices are very helpful. for some people.who are afraid to touch the machine. Blessings
Glad it was helpful!
Thank you for this video. i bought a 66K (1935) recently and now, with your help, she sews like a charm :)
I just picked up my Christmas present Singer 15-91 March 3, 1952 yesterday from a man who use to work for Singer and repair Singer sewing machines. I have all new wiring and motor therefore, he told me it just as being in 1952 and it will outlast my life span. I adore my Ginny and it sews lovely and the stitches are beautifully by increasing the tension thread. I also did darning free motion using a hoop and I was amazed how well it mended the fabric together very nicely. I am a very happy camper and thanks for all your tips on cleaning the vintage Singers. Also, you can purchase a cream cleanser and blue polish from a company that sells that for the vintage Singers. great video
Good tips and really appreciate the lighting.
Thank you so much for creating this video. I have been researching for hours after obtaining my first singer from a great aunt. It's still in great working condition and this video showed me everything I needed to get it cleaned up and running smooth!
Glad this video helped. I love these vintage machines! They are so well made and worth the effort to restore them! thank you for watching.
Jennifer Lillemo Please please please don't use paint thinner to clean your machine. Singer recommends you use kerosene. I felt like I was watching a horror movie when she said she was using paint thinner. You don't want to ruin the finish on your machine. Sewing machine oil is used on the finish/paint to clean dirt and dust, then use a good polish to make your machine shine.
Thank you for the info. I just learning how to recondition these machines. thank you for watching.
I was struggling to put the bobbin cover back on, thought I had broken it.
You salted my dilemma. Thank you.
Good stuff! One more thing that probably could of used a good cleaning and oiling was inside the hand-wheel. Apparently over time it can get pretty gunky in there and cause the stop motion wheel to stick when using the bobbin winder. I just got myself an old Singer 66, and just love the solid basics of these well built machines. Thanks for all the helpful cleaning and thread tension tips! 👍😊
You did a good job. Thanks for sharing. I have done a few machines now and each teaches us something new.
So very helpful. I am working on cleaning a 66 and your demo is making my work so much easier especially how to get the bobbin plate to stay in place. Thank you!
I know this is a very old video, but I still wanted to say thank you! This was incredibly helpful, as I'm about to go look at a Singer 66 tomorrow. You gave me really good pointers as to what to check for etc. And now that I've seen you clean and oil the machine, I've gained more confidence that I'll be able to do it, too. Fingers crossed that it's in reasonable condition. Thank you again!
If you go to bob fowlers channel, he has video of a complete rebuild of the 66 , very good videos if your looking to get it running perfect . Good luck .
I used googone and sewing machine oil for routine cleaning! I use Howard's feed & wax wood polish and wax for buffing and polishing my machines. Works like a charm every time!
Thank you sew much!! This tutorial walked me through cleaning and oiling a garage sale find!! love this machine.
Great video with lots of effective tips. Instead of steel wool & solvent you can use a scotchbrite pad & WD 40. Cleans almost anything and doesn't scratch or eat paint with harsh chemicals.
All i need is the belt. Thanks for this video. Omg so helpful.
Thank you!! I have the 1947 model 66 in thr cabinet...been wantin to get clackity-clack runnin again...you have helped tremendously
Lori,
I hope that you get your 1947 Singer Model 66 sewing again. I love the clackity-clack sound of the Model 66 and 99.
I believe that 1947 Model 66's have a numbered upper thread tension assembly and stitch length lever with back tack.
ibsoarin i did get it running..love the knee control... i just gotta replace the belt and i can put her to work
Lori,
Be aware that your 1947 66 originally had a solid balance wheel (which some people call hand wheel).
The belt size for a solid balance wheel is different from the belt size for an original Singer 9 spoke, 5.5 inch balance wheel.
The 9 spoke balance wheel would not have been original to your electric motor driven 66 machine unless it was a treadle or hand crank machine in the past and then converted to electric motor.
I love the looks of the spoked balance wheels. Plus I have the option to use the machine as electric motor, treadle or hand crank.
Rain Noe of The Vintage Singer Sewing Machine Blog concisely explains about the Singer spoked balance wheels.
vssmb.blogspot.com/2011/07/look-at-spoked-handwheels.html#more
Thanks for the video. It’s well done and will help with my recently acquired singer. I just got it last night, I don’t even know the model.
I particularly like the use of voiceover during the high speed sections.
Wow love a great fast educational video Hope to see more.
You are a great teacher, thank you
Great video. I too would not gamble on paint thinner to clean any vintage sewing machine. Form what I've read, kerosene is your best bet as it won't harm the decals. I love the story of how you got hooked on these old machines. My obsession started with inheriting my Mom's old 66. It's a back clamp machine, so it goes back pretty far. My mom loved that machine. My dad had bought it for her, used. They were married during the depression and didn't have much. When she had to leave her home, I just couldn't see that sweet old treadle machine that my mom treasured, go to a dump or get turned into an end table. So, I had it moved to my house 400 miles away. I fell in love with it and it's my machine of choice now, tho I've added a number of other vintage Singers to my stash.
Thank you for watching. I agree, these old vintage machines can't be beat. I know the newer ones have fancy stitches but most of the time, I am just doing straight stitching.
Sim,é singer 66,muito legal que bom.Ainda existe para vender?
Obrigada pela resposta rápida e atenciosa.
Awesome !!! Thanks for the info . I love the old Singers . I'm still looking for a Singer 66 .
I've always wanted one of these machines!
Trying to clean mine up to be sold. Found out it really just needs to be oiled but works pretty wel
Very interesting with lots of information. Thanks for the information on what's easy to fix and what to look out for.
Thank you for making this video. Please check a manual for your machine for the correct thread path.
Great video. Thank you.
Essas máquinas são incríveis, uma das mais lindas e eficientes
Ty for your help...got her belt and got it goin...However old sassy keeps getting the top thread jammed around the bobbin...Also just bought is 1897-1905 White Rotary treadle machine :)
Hi there, The issue may be the threading. Make sure you have thread the upper thread right and also some machine have the eye of the needle facing sideways and some you thread the needle from left to right. I had a machine i was reconditioning for a friend that was causing a fit with the tension and not catching the thread. I went on line and found the manual. Rethreaded the machine and it finally sew the perfect stitch. My sewing shop here is very helpful, maybe take it to a place you trust and have then help you figure why it is jamming. I hope this helps!
Tip when the feed dogs are not working on these old Singers.. There is a knob under the machine that when loosen will drop the feed dogs for free hand embroidery
Good tip, thank you for watching.
This was very interesting and helpful!! I have an older singer,In a wooden cabinet and it has the knee thingy. It was my grandmothers. It need a good tune -up cleaning. TFS
I would get it cleaned and oiled. These vintage machine in my opinion are 100 time better than those plastic machine out there. Just be careful with the decals. I learn to use mild cleaning solution so that the decals don't fade. Plus I also learn to use car wax for the body after you clean it. It will bring back that beautiful shine. Good luck with that machine!
Kim Miller The knee bar is connected to the foot pedal. Look under the machine, the foot pedal is in a holder that the knee lever pushes. If you want to use your knee to sew, that's up to you but if the machine motor runs with the knee bar that means the foot pedal is right at the end of the knee control, take it out of the holder and you can use it as a foot pedal.
Love this video, I have this exact same machine ,I have mine all polished up and looking great ,re stained the cabinet ,My question is what is the part # or what drive belt would work on this ? mine is dry rotted ,Thank you for the great informative video !
This is a very helpful video. Thank you for taking the time to make it. I received a model 66 yesterday and the wheel turns, motor runs, and light turns on but everything else is frozen. Took things apart like in your video, cleaned, oiled. Still no go. (Anyone have a suggestion on what else I could try?) I'll keep at it, but this video I'm certain I'll be coming back to. Really like the part about what to look for when buying one.
I hope your machine is running by now! Keep at it with oil and trying to turn it. Get really into the crevices with a paintbrush and make sure everything is coated and give the oil time to sink in. Once it is moving, keep oiling until it is moving smoothly. If it's badly rusted, you can use more severe chemicals like kerosene/antisieze. These machines can get beat up, but are pretty hard to kill and are designed to last several lifetimes
Nice video. Do you have any tips on how to clean the vintage accessories that come with the 66, ie: sewing feet? I have recently bought a singer 66 and all the accessories have rust on them. Thank you for sharing.
Great video.
Can you change it to handwheel turning with the hand not on the motor.
First it was frozen, i cleaned it and oiled it. The it was starting to sow but the tension was not quite right. I thought i was almost there. Then it froze completely. There was a lot of lint/ yarn dust in the bobbin holder in the machine and i tried to remove it. I think it’s need a service but it’s so expensive 😢. I’m really disappointed. The machine shines and the cabinet is fixed beautifully and the threadle and bobbinwinder are working. Does anybody have a suggestion how to get this old machine moving?
Wonderful! I bought a Singer 66 1946 (with the little table) and cleaned the machine and oiled it up. Thread needle catches the bobbin thread and loops it up through but when sewing it doesn't make stitches. Will be watching this and others to figure it out. Hopefully there is a manual online for this type. Thank you for posting this video and with the subtitles enabled :)
Heather Martin I hope you get it working. I would see if you have the needle backwards. Here's the manual for that machine, ismacs.net/singer_sewing_machine_company/manuals/singer-model-66-sewing-machine-manual.pdf. Hopes this helps!
Here's manual for that machine, ismacs.net/singer_sewing_machine_company/manuals/singer-model-66-sewing-machine-manual.pdf.
scrapinmaniac corner Lovely! Certainly will check the needle again. Thanks so much for the link to manual it is much appreciated. Cheers!
You have the needle in backwards?
Thank you very much for posting this link. I didn't want to spend 15.00 on a manual. Thanks again!!
Great video, Thanks for sharing
Teri in Texas
A frozen machine would mean that it hasn't been used and lots of oil will usually do the trick I wouldn't shy away from a vintage machine due to it being frozen, my husband rewires all machines for me if needed so that's not a problem either. Other then that you covered lots of basics, I've been servicing machines for over 5 years now. Bobbin tires, bobbins and belts are not a deal breaker for me those are easily replaced. Thanks for sharing! 👍🏾
Jacqueline's Home & Soul hello Brenda St CLair here
I have a 211w151. Can’t find a tutorial on this machine. Could you possible guide me to find one. Want to try to upholster my first piece
What if it isn't frozen but doesn't move freely?
Brenda St.Clair I've never seen or heard of that machine before sorry I couldn't be of better help to you. I hope you found what you were looking for. Happy sewing!
FreeStyleFox disassemble your hand wheel assembly, I usually find old oil and gunk stuck or it's usually very dry in that location and that's why it's stuck and won't move freely. 👍🏾
Could you show the underside of this machine more? I'm trying to compare my parts with a working machine to see what I am missing!
Sorry, I don’t have that machine anymore. It was a gift to my Sister who live two states away from me.
Only sewing machine oil on paint and decals..kerosene ( no additives) for the inside metal parts.
Boa noite,essa singer de laçadeira apollo antiga de 1924,tem uma lavanca que levanta a bobina na hora de tirar é muito boa importante e útil se as de novo modelo fosse assim seria muito prática,parabéns essa eu conheço.
Are you still refurbishing machines? How about treadle (non motorized) singer 66?
Can you show how to thread machine. This was my moms machine. I use to use so long ago. Just took out of storage & neef refrsher course.
Semi chrome motorcycle case polish will make anything look like chrome and it definitely will clean the silver it is non-abrasive
Andy Tube and Vintage Sewing Machine Garage have a ton of info on working with Vintage Sewing Machines.
Yes but in the event of it being frozen. Mind is a hard vintage the handle does not move the needle arm up and down after extensive oiling
The inner part may be rusted. Look under the machine to see if you see rust.
twangel mahoney you want to take it in to a repair shop where they can take it apart and clean the rust.
thank you for such a thural video!
thural?
Well done.
how do you clean the metal front plate if its a bit rusty thanks.
those are not dust bunny's! there "lint" monsters! lint monsters are a sign of a well used machine.
I’m currently cleaning my vintage Singer and mine had lint creatures from the black lagoon, lol!
@@LaceyMyriah LOL!!! i got a hold of my grandmothers and she smoked! i fought a tar monster with a +5 rag of cleaning!!!
Abit of this! & Abit of that! With Danny bless your soul!! I am thoroughly impressed. How is it running now?
@@LaceyMyriah the stitching is all over the place!! i think its more me then this old girl. otherwise she runs like a gem. she ran like a gem before the battle. fixing and cleaning is more my speed, fortunately all she needed was a power cord, a foot and some needles. she is from the 20's/30's. no foot peddle. her speed control is with the knee.
No paint thinner or solvents! You risk damaging the finish!
Looks similar to the 99K I just got.
Sounds dry . I heard one bearing circling within it's self. Oil Shure will help.ive never heard one do that..
Singer Model 66 was introduced at the turn of the 19th to the 20th Century in 1900. Singer deemed it THE Sewing machine of the 20th Century....These early Singers were small examples of the Industrial Revolution.....and the key to keeping these machines working was OIL...NOT 4 in One !! Use good quality sewing machine oil like Singer, Lily, or Zoom to name 3...Four in One oil leaves a dark varnish based residue...You can see it on vintage machines which were lubricated by 4 in One .Singer was always and is a pure oil ...I also like synthetic versions like Tri-Flow and Liquid Beaings.
Read your manual on where to oil and how often. In fact the finish on old Singers was made to be cleaned using Singer oil....then you're decals will be safe..
How do you open the base of the machine? Mine won’t open
Nice job. Do you know how to drop the feed dogs on that machine? Some Singers that old you can drop them to free motion. Thank you
Yes, this singer has that feature. Just needed lubrication and I was able to drop the feed dog.
@@scrapinmaniac thank you but I didn't see it lol.
Hello!! I just bought a 66 singer sewing machine yesterday! I found your video helpful! thank you! I do have a question, where did you buy the belt? I think you said you bought a 15 black belt. Please clarify which belt you bought and where you bought it from. Thanks again!
What kind of oil do you use. Mine is too dusty at all. Is it sewing machine oil.
Thank you for posting this. There are 2 small additions I would like to add to this video. One is how to remove the bobbin cover. The rounded piece with the 2 screws comes out first and then the rectangle piece slides towards the machine (not out from it) where the rounded piece was. It can then be pulled up and out easily. This will protect the small spring hold down from breaking. You will see a groove that is on the underside of the rectangle piece which is what holds it onto the flat metal spring. One other missing component is the "red felt" up against the bobbin track by a spring for oil. Next to the bobbin release button is a small spring that is supposed to hold a small piece of felt against that track. This felt is oiled and keeps that track lubricated and should be re-oiled from time to time. I can see the round spring that holds the felt but in this presentation there is no felt in it.
Richard Nordenberg thank you for the info. I need to look for that felt for the bobbin. I definitely love these old machines vs the new ones for regular sewing and mending. I like the newer ones for embroidery and fancy stitching.
Wonderful video , one of the best. Thanks.
Good video. You mention that screw that holds down the horizontal bar that sits over the bobbin casing. Do you know how to reset the position if one has to loosen the screw in order to lift the bar up and move counter clockwise to get the bobbin case out? I just bought a 66-18 for $20 and during my first cleaning and oiling I had to loosen the screw on that horizontal bar to get the bobbin case out to clean the dust from the area.
Or the little holes in many levers@shafts for oil
i have a 1931 singer.. i did some oiling and cleaning but it is hard to turn the handwheel.. i lessen the tension but then the needles doesn't move... i oiled underneath also ... any other ideas what it could be?
I'm restoring my old 115 right now. My needle didn't move either. I took out the bobbin case and shuttle and it moved so I know the problem was in the bobbin area. I also took the face plate off and lubed the needle shaft/pin. I'm now putting it back together so I'm hopeful.
I have exact machine. my problem is the motor controller, the problem is part of the wiring has material wrapping and it is worn out. I would like to know if I can replace it.
Hi there, you can replace the motor, here's a link , www.sewingpartsonline.com/search.html?keywords=Singer+66+motor, I usually just buy a new motor if it not working. You also can put these machines on a treadle.
Maria,
The wiring of your foot controller can be replaced. It would be easier to replaced the motor, foot controller and wiring but I prefer the original Singer electric motors.
Check out "The Vintage Singer Sewing Machine Blog" by Rain Noe. The tutorial on rewiring a Singer 99 is identical to rewiring a Singer 66.
vssmb.blogspot.com/2012/04/reader-questions-rewiring-99.html
The other parts of the rewiring tutorial are about Singer 201-2 potted motors but the instructions are helpful for any sewing machine.
HI GREAT VIDEO I HAVE A MONTGOMERY WARD M30 SEWING MACHINE BUT CAN"T SEEM TO GET THE NEEDLE TO PICK UP MY BOBBIN THREAD,CAN YOU HELP PLEASE.
Hi Bessie, I am not an expert with repairing these machines but I once helped someone fix theirs and they had the same problem. Because we did not have the manual, we threaded the machine wrong (the needle was inserted backwards) and I threaded the needle wrong. The needle has a curve on the back of the eye. That slight curve is what allows the bobbin hook to catch the thread when the needle penetrates the fabric, and creates the knot as the bobbin thread is captured on the upper thread on it's way up. The timing of the bobbin hook and when the needle is down needs to be precise. However, most often the issue of the bobbin hook not catching the thread is due to improper needle position on machine or improper threading. Make sure its threaded correctly. If that is not the case, without threading the machine, manually move the needle while observing the bobbin area and see if the bobbin hook is meeting the back of the needle (shank) at the right moment. If timing is off , I would take it in for repair. But if it's a machine you have is for learning how to repair sewing machines, you can search on sewing machine timing and see if you can repair it yourself. Good luck!
Thank you so much .I WILL TRY THAT WILL LET YOU KNOW IF THAT WORKS
What size flat head will I need to remove the screws?
I don't know but I get the screw drivers from a sewing service and fabric store. They usually sell a set of screw drivers for any size .of screw you find in sewing machines..here's a link to a nice set, amzn.to/2oxZCwR
i wish you could repair my grandma's sewing machine but the distance is the issue
What type of vacuum did you use with your tiny kit ?
Are you going to time it
Do you know where I can get a bobbin case for one of these sewing machines?
eBay is your best friend!
Your machine is threaded wrong. The thread goes around the discs, through the checkspring, under the guide beside the tension, UP THROUGH THE THREAD TAKEUP LEVER, down through guide on faceplace, then down to needle.
Good eye.. I spotted the (wrong) threading as well,, was looking at comments to see of anyone else did.
Thanks
How often do you recommend this level of service?
Karosine. Always use only karosine to clean with.
Does anyone know where to purchase belts for this Singer? I bought a set, made buy Singer, that said they fit "most" machines. They don't fit mine!
Hi there, try this link, www.sewingpartsonline.com, I got my parts from this website. It post the models that those particular part will work for.
Thank you so much. They have my Singer's belt (66-4) in stock.
Here's the manual, ismacs.net/singer_sewing_machine_company/manuals/singer-model-66-sewing-machine-manual.pdf.
Use evapo-rust.
buy rusty machines, the stuff restores and removes all the rust without dissassembly
How do I unfreeze my singer 66
Dissassemble, clean,polish, reassemble.
Heat.from hot air gun and wd 40 over and over. You may have to do this to get it disassembled usually you have to unseize it to disassemble it
Is this contain red mercury
Not sure.
cuanto cuesta la maquina
😉👍
...is REFUBASHING a play on words?
Aqualidades delas nem se fala
"Refubashing"??
You say you do this, yet you don't know how to remove the slide plate properly??
Michael Thomas , hi there, I do this as a novice. I refurbished 6 machines for myself and gave some away as gifts so like any skill one acquires , you have a learning curve you will need to overcome before become an expert. I thrive on learning new skills and refurbishing vintage machine it’s just one of many skills I am learning to do. Thank you for watching.
So how do you remove the slide plate properly? I just inherited a 1923 singer 66 redeye. Help?!
@@kathyjuda3293 get the manual online for free. It explains how to remove it. There are youtube videos as well.
Lol you never want to do this to a modern machine she says , of course not , you just take it to the dump ha ha ha , nobody saves plastic crappy machines do they?
Thank you so much! I have a Singer 54'...kisses from Brazil