if the lever does not come off when you put the pin in the hole check if it has a hole on the other side of the lever, some of these levers have a hole on each side, only one of these holes have the push pin to release the lever. also on the side of the lever where you put the key in the lock you have to turn the key to the open position while pushing the pin.
It took almost an hour to remove the lever with the pin provided and it has been over the rose cover still has not come off. I wish that i had viewed the comments first.
Hello, We are sorry to hear that you were experiencing difficulty with removing the lever from the lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove/reinstall the lever. If it's locked, it's very difficult to remove/reinstall. If you're experiencing difficulty with this lockset again please give our Customer Care team a call and we would be happy to help troubleshoot. 866-562-5776
Honestly, it was easy to remove the lever but only after i realised how it works. You push the pin in, pull out the lever about a millimeter and the take the pin out and the handle will pull off easy.
Hello. I am very sorry to hear that you're experiencing difficulty removing the lever from your light duty lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove the lever. If it's locked, it's very difficult to remove. If you're still having trouble, please give our customer care team a call and we can help troubleshoot this for you. 866-562-5776.
NO ONE should buy this lock. Unless you want to spend hours trying to remove the lever. THIS IS GARBAGE!!!!!!!! The instructions are unreadable. So I found this video. Just confirming I'm doing what I'm supposed to. Don't but this!!!!! Did get it off... eventually. Instead of pushing pin in a pulling at same time. Try pushing in and then maybe it'll just come off. IDK, maybe that's how it works. Eventually it came off. OMG - I have this thing installed, but the handle doesn't want to lock back in place. This is a sick joke. Finally done. It will eventually work. If haven't used this b/f, it's a learning curve and not as simple as the video. I think the problem is that everything is explained like garbage. They needed a 6 minute video. Instead they gave 3:26.
Hello, We are sorry to hear that you were experiencing difficulty with removing the lever from the lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove/reinstall the lever. If it's locked, it's very difficult to remove/reinstall. If you're experiencing difficulty with this lockset again please give our Customer Care team a call and we would be happy to help troubleshoot. 866-562-5776
@@UniversalHardware Update. It took an hour to get the lock on. It's not that the product is defective or even hard to install. It's that the instructions are non-existent. To get the handle off - push in with the pin. then withdraw the pin and take handle off. If doesn't work at first, just try a few times. Don't try to push in and simultaneously pull handle off. To get the plate off, can use a small flat head screwdriver, no problem. It does not just come off as in the video. The door handle is going to latch onto the cylender with the tab part facing outward. If the tab is facing inward, then the door handle will latch on the wrong way. So make sure that is pointing out. Otherwise, the product is fine. For the cost of the item and the labor it must take to answer people's questions, you'd think it would just be better business to provide proper instructions, or at least film a youtube video with someone actually installing it and going over these issues that are coming up.
@@slmrcsWe appreciate you taking the time to provide this feedback. We are actually in the process of improving our written installation instructions and we will take this feedback into account as we work through the lockset instructions. Please do not hesitate to reach out if there's anything else we can help with.
Hello. I am very sorry to hear that you're experiencing difficulty removing the lever from your light duty lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove the lever. If it's locked, it's very difficult to remove. If you're still having trouble, please give our customer care team a call and we can help troubleshoot this for you. 866-562-5776.
@@ryanrutan3530 If the lockset is a passage lever then the interior lever should remove using the provided push pin to remove the rose for install. Please reach out to our team at 866-562-5776 if you're still having difficulty. We will help you troubleshoot or issue a replacement.
Hello, We are sorry to hear that you're experiencing difficulty with our lockset. Please give our Customer Care team a call so we can assist you, 866-562-5776
Hello. We're very sorry to hear that you're experiencing difficulty removing the lever from your light duty lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove the lever. If it's locked, it's very difficult to remove. If you're still having trouble, please give our customer care team a call and we can help troubleshoot this for you. 800-562-5625.
@UniversalHardware It took me almost an hour to remove the lever with the pin provided, and now it's been over an hour trying to remove the rose cover. The video wasn't that helpful for removing the rose cover. 🤦🏽♀️
@@jacobpinos506 Appreciate the feedback. We are currently working to correct this issue to allow for easier removal of the lever and rose. Please give our customer care team a call so we can help troubleshoot in the meantime. 866-562-5776.
Hello. I am very sorry to hear that you're unsatisfied with your lockset. We'd appreciate the opportunity to help you. Please give our customer care team a call so we can help troubleshoot. 866-562-5776.
if the lever does not come off when you put the pin in the hole check if it has a hole on the other side of the lever, some of these levers have a hole on each side, only one of these holes have the push pin to release the lever. also on the side of the lever where you put the key in the lock you have to turn the key to the open position while pushing the pin.
It's the separating the interior rows from the mounting plate for me. I could remove the lever easy as pie😊
It took almost an hour to remove the lever with the pin provided and it has been over the rose cover still has not come off. I wish that i had viewed the comments first.
Hello, We are sorry to hear that you were experiencing difficulty with removing the lever from the lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove/reinstall the lever. If it's locked, it's very difficult to remove/reinstall. If you're experiencing difficulty with this lockset again please give our Customer Care team a call and we would be happy to help troubleshoot. 866-562-5776
Men of culture...we meet again. F uxk this lock
Any help with removing the rose cover would be greatly appreciated.😡😡😡
Once you see how the lever comes off it's easy. Until then it's baffling. Better instructions with a clear picture is needed.
here's how i do it, remove rose first, then push the tab that locks the level. less then a minute
Honestly, it was easy to remove the lever but only after i realised how it works. You push the pin in, pull out the lever about a millimeter and the take the pin out and the handle will pull off easy.
👏
Fake product. I couldn’t remove the handle easily
Hello. I am very sorry to hear that you're experiencing difficulty removing the lever from your light duty lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove the lever. If it's locked, it's very difficult to remove. If you're still having trouble, please give our customer care team a call and we can help troubleshoot this for you. 866-562-5776.
How’d you get it off 😡
NO ONE should buy this lock. Unless you want to spend hours trying to remove the lever. THIS IS GARBAGE!!!!!!!!
The instructions are unreadable. So I found this video. Just confirming I'm doing what I'm supposed to.
Don't but this!!!!!
Did get it off... eventually.
Instead of pushing pin in a pulling at same time. Try pushing in and then maybe it'll just come off. IDK, maybe that's how it works. Eventually it came off.
OMG - I have this thing installed, but the handle doesn't want to lock back in place. This is a sick joke.
Finally done. It will eventually work. If haven't used this b/f, it's a learning curve and not as simple as the video. I think the problem is that everything is explained like garbage. They needed a 6 minute video. Instead they gave 3:26.
Hello, We are sorry to hear that you were experiencing difficulty with removing the lever from the lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove/reinstall the lever. If it's locked, it's very difficult to remove/reinstall. If you're experiencing difficulty with this lockset again please give our Customer Care team a call and we would be happy to help troubleshoot. 866-562-5776
@@UniversalHardware Update. It took an hour to get the lock on. It's not that the product is defective or even hard to install. It's that the instructions are non-existent.
To get the handle off - push in with the pin. then withdraw the pin and take handle off. If doesn't work at first, just try a few times. Don't try to push in and simultaneously pull handle off.
To get the plate off, can use a small flat head screwdriver, no problem. It does not just come off as in the video.
The door handle is going to latch onto the cylender with the tab part facing outward. If the tab is facing inward, then the door handle will latch on the wrong way. So make sure that is pointing out.
Otherwise, the product is fine.
For the cost of the item and the labor it must take to answer people's questions, you'd think it would just be better business to provide proper instructions, or at least film a youtube video with someone actually installing it and going over these issues that are coming up.
@@slmrcsWe appreciate you taking the time to provide this feedback. We are actually in the process of improving our written installation instructions and we will take this feedback into account as we work through the lockset instructions. Please do not hesitate to reach out if there's anything else we can help with.
@slmrcs how did you remove the rose cover? I've been trying for over an hour.
push pin is a joke, people. about an hour in a can't remove the lever the proper way without force.
Hello. I am very sorry to hear that you're experiencing difficulty removing the lever from your light duty lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove the lever. If it's locked, it's very difficult to remove. If you're still having trouble, please give our customer care team a call and we can help troubleshoot this for you. 866-562-5776.
@@UniversalHardware it's keyless. How do I make sure it's unlocked?
How’d you get it off 😡
How’d you get it off 😡
@@ryanrutan3530 If the lockset is a passage lever then the interior lever should remove using the provided push pin to remove the rose for install. Please reach out to our team at 866-562-5776 if you're still having difficulty. We will help you troubleshoot or issue a replacement.
This is the worst product ive ever had to install
Hello, We are sorry to hear that you're experiencing difficulty with our lockset. Please give our Customer Care team a call so we can assist you, 866-562-5776
Dont buy it dont waste hours and hours trying to remove this s#it
Hello. We're very sorry to hear that you're experiencing difficulty removing the lever from your light duty lockset. Please ensure the cylinder is in the "unlocked" position before attempting to remove the lever. If it's locked, it's very difficult to remove. If you're still having trouble, please give our customer care team a call and we can help troubleshoot this for you. 800-562-5625.
@UniversalHardware It took me almost an hour to remove the lever with the pin provided, and now it's been over an hour trying to remove the rose cover. The video wasn't that helpful for removing the rose cover. 🤦🏽♀️
@@haneefahmorgan7314 Please contact our customer care team and we can help troubleshoot this for you. 800-562-5625.
@@UniversalHardwareor how about design a better product and remove these off the shelves
@@jacobpinos506 Appreciate the feedback. We are currently working to correct this issue to allow for easier removal of the lever and rose. Please give our customer care team a call so we can help troubleshoot in the meantime. 866-562-5776.
This lock sucks
Return this bs product.
Hello. I am very sorry to hear that you're unsatisfied with your lockset. We'd appreciate the opportunity to help you. Please give our customer care team a call so we can help troubleshoot. 866-562-5776.