How to Use the Quick Support Rod

Link to product: www.richelieu.com/qr/c/1232638
This quick support rod features a strong EVA (Ethylene Vinyl Acetate) foam grip to hold the rod under wet working conditions.
It comes with tiltable rubber pads that are helpful for different applications.
Weight load: 120 lb (54 kg) at 90° and 44 lb (20 kg) at 65°
- EVA foam grip enables better hold on rod under wet working conditions
- Patented built-in push lock pin system on extension tubes that is proven and secured for safety measures
- Versatile tiltable rubber pads adjust to different applications at home or on jobsites
Articulating gripper pads
- Drywall and ceiling installation
- Dust containment barriers
- Installing moldings, undermount sinks, and cabinetry
- Temporary barriers and supports
Support a laser lever, camera, or work light
How to use the quick support rod:
1. Ensure the locking pin is in the open position extending from the left side of the rod
2. Bottom pad flat and secure
3. Press and hold the locking latch open while pulling out rod extension
4. Pull to desired height
5. Once stable, ensure locking latch is secured in a slot
6. Slide locking pin to the right to prevent accidental pressing of latch
7. Fine-tune the tension by turning the rod clockwise to tighten
8. Latch is locked
9. To take the rod down, loosen the tension by twisting the rod counter-clockwise
10. Shift locking pin to open position
11. Depress the locking latch and lower the rod extension back into the rod body
www.richelieu.com
.
.
.
.
#richelieuhardware #richelieu