Just bought a 2008 R51 Pathfinder that was kind of neglected (romanian mechanics) but your vid's helped allot. Hope you are ok. You're the best in Nissan on youtube !!!
yay welcome back! so happy to see your still with us buddy glad to see others are sending love from Australia as well! you have been a great source of information that just cant seem to be found anywhere else
Good to see u back. My new injectors just arrived and your vid will be my guide for the remove and refit. I'm glad you guys are out there since I would very likely sell the Nav I bought recently unless I had solid advice on making repairs like this. That is, I didn't do enough homework and missed the part about these things having a Renault engine, scarey! I'm lucky I got the price down enough to cover this but it was in anticipation of a timing chain kit. I guess that will be next then hope the big ends hold up. Nissan have really gone to hell and don't want anyone sorting the problems that they appear to have deliberately built in. Some how I failed to heed my own advice and now I may be stuck with a money pit vehicle. It must be soul destroying for people who can't do the work themselves. As I said, glad you are out there, mate, at least you know what you are doing and independent. Most are mediocre at best when tested. Given the new factory solution to the timing chain issue, it's almost unbelievable that they would try on such a blatant rip off. I am so utterly discussed with the vehicle industry. I just have to say to anyone out there ...Don't buy a Nissan, VW, ford of Mercedes Benz without looking at the companies actions in recent years and what they have been building. They are just the ones that I know have definitely been shafting their customers. Looks like Toyota are doing it too now. It seems to be getting harder to find solid reliable vehicles just when it should be easy. Cheers Jack from Oz
Great to see ye back lads. Any advice on what to look out for in a navara np300. I have had a few d40s and loved them. I'm stuck between a ranger and navara. 2016/17.
hi mate, any ideas why my 2010 Navara only blows cold air? No leaks or overheating. Mechanic said he's changed heater matrix but not resolved the issue. He thinks it's the resistor but the fan works fine on all speeds. Just no heat! Great vids btw
Hi I'm from south africa watch a lot of your videos. I have a D40 the lower water hose from the radiator is not hot and heater does not warm up. Could it be thermostat, water pump or airlock?
G’day are you my name is Shane I have just recently switched my 2.5 L Nissen X Trail petrol engine to complete conversion to the 2.2 L diesel engine without success connected to the original five-speed manual have had no trouble since I’ve done it Cara runs like a dream in fact it’s better on fuel Regency
Good day I have a problem with my D40,last year November I blown my head gasket,so head was shave and the guy who did the head tell me mechanic used the thicker gasket it have for the D40 which was VK505 when job completed a week after I notice coolant coming out from the over flow bottle and radiator always have to get top up so last 2 weeks back I park up with the van idling and notice the temperature reach a little over half so I switch off for 10 mins and vehicle didnt want to start so I wait for 25 mins and it start back but when I check radiator wanted water again so I top up before leave to head home but notice a white fort now and I hopping it's not the head gasket again that blown someone tell me it could be air lock somewhere or one of the hose have a crack and sucking air any advice plz.
sorry to trouble u . i have a nissan navara. d40. pickup 2012..the airbag ight is flashing on my panel.ive renewd the spiral cable.and the light is still flashing ... can you help ? please.
Hi mate just subscribed to your channel having some major issue with my pathfinder , getting no heat through heating , changed radiator , waterpump and thermostat . Topped up the way u did took a drive let it cool and its taken another 5litre , i repeat the process and same everytime , i have the rear heating aswell . I am stuck . No white reek or steam from the exhaust , no idea where the water is going as cant see a leak
William holdum The outcome was she had work done on her motor and did not pay sadly we see this all the time with all trades they do not understand how it can affect a small family run business buddy
Des , that's fair enough and no one who is actually trying to be honest in life should never be ripped off . So in that note , how and why do you continuously RIP the everyday man on the street off ? I don't expect a reply or a answer because you don't like answering people who have had work / purchased products from you now do you , yet you have no problem coming on here playing the poor family victim.
the only wat to bleed this correctly is using the Vacuum bleeding system , this does it right first time every time , your way is the old way , and not really suited for modem engines
Before anyone engages with this company do a google search on them there are some very interesting reviews of your company and some very unhappy customers
Wouldn't it be easier to do a vacuum down in the coolant system ? I find its way easier to do it that way.
Good to see your back mate
Just bought a 2008 R51 Pathfinder that was kind of neglected (romanian mechanics) but your vid's helped allot. Hope you are ok. You're the best in Nissan on youtube !!!
Adi Adrian Thanks buddy
I have bought the biggest pile O sh*t D40. If you ever come to Australia I'd love for you to take a look and work your magic.
You are a legend mate hope you are well. Make sure you take time to look after yourself we can wait .
Yes welcome back brother, hope your all well
yay welcome back! so happy to see your still with us buddy glad to see others are sending love from Australia as well! you have been a great source of information that just cant seem to be found anywhere else
Google des marples the guy is a con man
welcome back geezer
Keep doing what u r doing mate everything I know about my navara is watching your video's u know your stuff regards john
Cheers mate thank you!
Thank you guys so much, you have saved me so much money.
Good to see you guys back. 👍
Good to see u back. My new injectors just arrived and your vid will be my guide for the remove and refit. I'm glad you guys are out there since I would very likely sell the Nav I bought recently unless I had solid advice on making repairs like this.
That is, I didn't do enough homework and missed the part about these things having a Renault engine, scarey! I'm lucky I got the price down enough to cover this but it was in anticipation of a timing chain kit. I guess that will be next then hope the big ends hold up. Nissan have really gone to hell and don't want anyone sorting the problems that they appear to have deliberately built in. Some how I failed to heed my own advice and now I may be stuck with a money pit vehicle.
It must be soul destroying for people who can't do the work themselves. As I said, glad you are out there, mate, at least you know what you are doing and independent. Most are mediocre at best when tested.
Given the new factory solution to the timing chain issue, it's almost unbelievable that they would try on such a blatant rip off.
I am so utterly discussed with the vehicle industry.
I just have to say to anyone out there ...Don't buy a Nissan, VW, ford of Mercedes Benz without looking at the companies actions in recent years and what they have been building. They are just the ones that I know have definitely been shafting their customers. Looks like Toyota are doing it too now. It seems to be getting harder to find solid reliable vehicles just when it should be easy.
Cheers
Jack from Oz
Saved me alot of time. Thank you.
Thanks dez for doing the video you always no with these navara and u r very thanks again john
Mate that vid was for you cheers I needed a kick up the arse Thanks again
Great to see ye back lads. Any advice on what to look out for in a navara np300. I have had a few d40s and loved them. I'm stuck between a ranger and navara. 2016/17.
Good to see you back on here, Hope there is lots more to come
Thanks for the great information and all the best, please keep it up thanks again.
hi mate, any ideas why my 2010 Navara only blows cold air? No leaks or overheating. Mechanic said he's changed heater matrix but not resolved the issue. He thinks it's the resistor but the fan works fine on all speeds. Just no heat! Great vids btw
Hi I'm from south africa watch a lot of your videos. I have a D40 the lower water hose from the radiator is not hot and heater does not warm up. Could it be thermostat, water pump or airlock?
Thank you for all your information,it always help 👍
welcome back big hi from Jordan ...
Hussein Abu-Obeid Hi Jordan thanks for that buddy All the very best to you and your family Des
Cheers mate love ya vids
Welcome back!
Guys. is it wise to buy ANY navara ute between 2009 & 2019 ??? or stay well away from them all.
Love your navara d22 videos mate great tips and actually visuals of fucked engines ..welcome back ..all the way from New Zealander cheers 🍺🍺🍺🍺🍺🍺🍺
Where have you been, I ve missed your videos!! Thanks for the info
G’day are you my name is Shane I have just recently switched my 2.5 L Nissen X Trail petrol engine to complete conversion to the 2.2 L diesel engine without success connected to the original five-speed manual have had no trouble since I’ve done it Cara runs like a dream in fact it’s better on fuel Regency
After doing a bit of research on your company it’s coming back as you have declared yourself bankrupt ?? Is this correct??
Hello mate , I own a d40 and have no heat from my heaters, can you show us how to flush the heater matrix
Good to see you bk. 👍👍
Could you do a nav d22 coolant bleed video, I'm having a nightmare with mine, cheer
Applicable to nissan np300 d23 engine?
Good day I have a problem with my D40,last year November I blown my head gasket,so head was shave and the guy who did the head tell me mechanic used the thicker gasket it have for the D40 which was VK505 when job completed a week after I notice coolant coming out from the over flow bottle and radiator always have to get top up so last 2 weeks back I park up with the van idling and notice the temperature reach a little over half so I switch off for 10 mins and vehicle didnt want to start so I wait for 25 mins and it start back but when I check radiator wanted water again so I top up before leave to head home but notice a white fort now and I hopping it's not the head gasket again that blown someone tell me it could be air lock somewhere or one of the hose have a crack and sucking air any advice plz.
Has Daryll never heard of oils changes?
What happened to the 2 videos that were deleted yesterday? 🤔
how to bleed cabstar 131hp. cooling system
sorry to trouble u . i have a nissan navara. d40. pickup 2012..the airbag ight is flashing on my panel.ive renewd the spiral cable.and the light is still flashing ... can you help ? please.
Just bought a 05 Navera D22, what coolant do i need? it has some in the expansion tank but it looks low and lime green?
Good to see you guys..love all your vids.
My goodness what in the - was that mess in the rocker cover?
hello how bleed coolant system on pathfinder yd25 ?
Hi mate just subscribed to your channel having some major issue with my pathfinder , getting no heat through heating , changed radiator , waterpump and thermostat . Topped up the way u did took a drive let it cool and its taken another 5litre , i repeat the process and same everytime , i have the rear heating aswell . I am stuck . No white reek or steam from the exhaust , no idea where the water is going as cant see a leak
Cracked Cylinder head sorry
@West yorkshire engine services would this cause back pressure? why am i not getting white reek an it still running fine ?
What do you think about these one off water free coolants?
have a nissian x trail coming up low pressure in fuel rail any adviice it a diesel 2.2 year 2005
Why is that valve cover full of black creamy stuff, doz he not change his oil regulally enough.
what was the outcome of your arrest ?
William holdum The outcome was she had work done on her motor and did not pay sadly we see this all the time with all trades they do not understand how it can affect a small family run business buddy
Des , that's fair enough and no one who is actually trying to be honest in life should never be ripped off . So in that note , how and why do you continuously RIP the everyday man on the street off ?
I don't expect a reply or a answer because you don't like answering people who have had work / purchased products from you now do you , yet you have no problem coming on here playing the poor family victim.
the only wat to bleed this correctly is using the Vacuum bleeding system , this does it right first time every time , your way is the old way , and not really suited for modem engines
Oh dear 🤦♂️
Before anyone engages with this company do a google search on them there are some very interesting reviews of your company and some very unhappy customers
Are you on whatsapp i need some advice on my nissan navara yd25 2007
Only thing he knows how to bleed is people’s pockets,
Please check your email i am awaiting your response thanks
WhatsApp numaranızı verebilir misiniz?
When are you doing the V6 engine rebuild? You have had the engine and money 💰 for 15 months now. You are a con man
Onwards and upwards ????? I’m going to let everyone know about you crooks !!!!
Why are you back i reckon youre the WORST mechanic ive ever seen!!!