DIY 2009 DODGE AVENGER BRAKE PAD JOB, EASY AND FAST
Вставка
- Опубліковано 3 жов 2024
- This is how to change brake pads on a 2009 dodge avenger. Its simple but be careful when spinning the rotor in the air if you do it the way i showed in this video while sanding off the glaze, Keep your head up and God Bless. Jesus is the reason.
Wow man I was just clicked on ur video to get a few tips on how to do my brakes and at the end when you started to encourage the ppl about putting God first really spoke to me man amen
The EZ and fast way and well Done , someone give this guy a medal!
Man you saved me $200
I didn’t know it was this easy to replace. God bless you brother.
This video was awesome. Then he mentioned Jesus at the end. 🙏🏼 thanks man.
I highly recommend this video to anybody who don't have the time or money to do this. Thanks for this video man God Bless!!!
excellent video old school!!! only thing you forgot to let them know is to take the brake fluid cap off from under the hood...so once you push that piston in on the caliper you dnt push air back into the brake line... if you dnt take the cap off you will have to bleed the brakes after the change because 9x out of 10 you pushed air back in...and it will be very dangerous to drive under those conditions...but other than that this was a nice video... GOD bless and keep making blessings for others
THAAAANK YOU SO MUCH!! I needed this video. You took your time, you didn’t rush. You reminded me of my pops, he was a mechanic. Passed when I was young so he never got to teach me how to do certain things on a car. I needed this video. 🙏🏼 tryna make my dad proud & do it myself like he would!! 👨🏽🔧
Sorry to hear about your Dad. Its good to know you are willing to tackle car problems. keep on fighting and being independent. I teach my daughter the same to always try to fix things on her own and never wait for anyone.
Thanks for a great learning video OSF. More so thanks for including Jesus in your message to the people.
Shows you how it's done just as a dad would show his kid. Everything you need to know to do it safe and right. Thanks for this.
This video helped me get my 2012 done. Thanks bro. Salute.
i really like your videos and i like the quotes at the end keep up the good work brother
Right on Albert. Keep your head up Brother, God Bless.
Never put on brakes before and thanks to you I learned how to do them myself. Thanks for the information man.
Thank you so much! This video is so helpful.The explanation is clear and the camera is very well positioned！
Thanks bro I really needed this, thanks for all the detailed explaining.
Great video, very informative. Only one thing I could of done without of was the ending. I came for breaks. Not my soul. Liked and subbed. Keep it up
Your tutorial was the best one I've found. Thanks man...
Thanks for a great detailed brake job and speaking for Christ
Thanks for sharing Oldskool. I learned a few new things using the silicone on the back of the pads and on the caliper housing. Knocking off the glaze on the rotor was also new to me, thanks for the update and improvement for this viewer. I did notice one thing different in regard to the brake pins which hold the caliper on and slide(slide pins). Eric the Car guy advocates to use silocone paste on the pins, I noticed you used antiseize lube. I think Eric advocated silicon because it does not affect the rubber, I do not know if antiseize affects rubber(swelling). Either way excellent demonstration of doing brakes.
I use this video now as a reference for other cars too, great walk through and attention to detail. Thanks a ton man
Loved the video. now i actually have something educational to watch on youtube.
Props to you Brother. I'm about to service my 2014 this week. I appreciate you and your informative video. Keep up the great work.
Thank you, I'm subscribing. Great job. I'd like to hear your Bible teaching too.
You are a hell of a man. Respect.
Thank you for this video, I will do this tomorrow morning. I m trying to fix some brake grinding. You are always a great inspiration for me. I fixed my car just by learning from the internet. I own a very cheap car i afford it because i fixed it myself.
Best how to video I’ve ever seen made s*** really easy
Awesome video, sir. I appreciate the details and recommend you to any of my friends needing to do simple maintenance on their vehicles.
God Bless you, every where you are. Thanks brother.
Thanks brother. Changing mine before I take a 600 mile road trip down south
God First!!!! Thank you Old Skool
Great video bro! Just got a 2008 Avenger and don't trust it with any one but myself.
Like the video, straight forward and to the point. Well done
Thank you for the time and effort to film this.
This video helped and repent to Jesus Christ in the end was the golden cherry on top ❤ thanks unc
Thank you for the walkthrough brother. Very helpful and detailed. Thanks for saying what you said at the end man. idk why but it hit me hard. take it easy buddy.
Solid video! Thank you for your work.
Great video. Detailed and to the point. Thank you.
Thank you for this great video! To the point and great editing. No b.s. Helped me finish the fronts on gf's Avenger. I owe you a beer
Great video quality, instructions, and explanations. Thanks bro!
You are detail oriented. Thank you
"Hey Guys! Chris Fix here!"
yeah man, couldn't hear the vid because I was swearing too much. This one explained better for my kind of vehicle.
This will be my instructional video tomorrow, when I attempt to change my rear brakes on my 2014 Avenger. Thank you sir for your attention to detail.
That was awesome! I appreciate that my friend!
Thanks so much for this bro. Very clear instructions.
God Bless... Thanks abunch...
that anti-seize I call it "everywhere" that shit gets everywhere lol.
great video and great ending! I subscribed so I can support the videos
Good video, it helped me out
Awesome video! Thanks!!
Nice video Champ.
You are awesome!! Thanks for your video.
Nice video, thank's for that!
Great video brother God bless you.
Great video. Thank you & God Bless!
Great video. Thanks so much. God bless you:)
Thank u so much for this video. I am a woman and people tend to think that makes me incapable of repairs on my vehicle. I DO have a question though. Were u working on 2 separate tires because one of your steps confused me.
At 9:10
Great video
when you push in caliper piston you don't take off break fluid reservoir cap before you push in piston? and you don't have to bleed breaks anymore? thanks for video very cool
Steven Guice no need for bleed but sure most take of that cap of the brake fluid reservoir to push the piston back in.
Great vibes ✌🏻
Thanks for sharing the video. God Bless bro
I'm mind blown about only removing 1 caliper bolt 🤯 How have I been doing it the hard way all these years!?
Mad love brotha thanks
Thanks brother!
safe guy good job
Thanks Man!!!! Appreciate The Video!!!!
thanks a lot man
My 2009 dodge avengers rear brake caliper plug on the top cant be removed because of the stupid brake line so I cant replace the brake pads, and help?
just like that cool video
Great video bro thanks!
Hi ! TKS for video ! It is awesome ! Please tell which type of lubes you applied on this video ? It is vital to know
Awesome video, serious question how do fix speedometer on my '95 Dodge ram 2500 the gauge on the speedometer don't work, but all other gauges on cluster do. What's the problem that I'm having? Thanks.
Nice vid. Can you do a video on how to change the rear brakes?
great video!!!
Thanks for sharing
Friend of mine has a truck with 168k miles on it with the original brakes. I asked him how he managed to do that? He said; "I don't stop- I just go"!
Is it the same with a 2013 Dodge avenger?
Also thanks for uploading this video.
i have a problem. I was driving earlier and hit a real big dip, the road was covered with water so i didnt see it. The belly pan or the plastic cover for the bottom of my 2010 avenger came off and there was also two metal hoses that are held together by a plastic piece that im assuming became unlatch er sumthing if anyone knows anything about it can you please reply asap this car is a daily driver and dont want it to mess up
Does this also apply to 2013 Dodge Avenger ?
Nice job, I subscribed.
Thanks very helpful
I have never seen anyone use anti-seize on brake clips, use a standard brake grease.Second, never, ever lay your brake pads face down on a driveway...….Use a torque wrench, not a sledge hammer.....
You should use brake grease not anticize compound.
nice to see somebody else throw that tire underneath. you never know
thank you for the video
When changing the pads..how often should the rotors been changed also??
Rotors generally only need to be changed if there's grooves worn into them, or they're warped and make your car vibrate when applying brakes.
Would this help with 2014?
thanks bro
oldskool, hey bro how was you spinning your rotors? was the car in drive? and how do you determine whats glaze, is it shining?
Mad respect
This video is legit
Muchas Gracias
Do you even have a Jack
Awesome 💯
Thanks for the awesome brake change video.....especially the extra safety tips a lot of people forget. One question....where did you get the caliper push tool? I have used several items to do this but I really like your tool. Please message me back about where you purchased the tool. Thanks Again! ;@ )
David Carroll Thanks David, I believe I got it from AutoZone Im not sure But you can probably get a cheaper one from harbor freight
Got mine from Harbor Freight or you can use C-Clamp.
Is it the same for a 2010?
name of that clamp?
WATEROWL disc brake spreader👍
were are u located
to as many as believed In him to them he gave the right to be called the children of God. born not of the blood , not of the flesh nor of the will of man but of God
Those new pads don’t look a whole lot better than the old pads. Don’t see a lot of material there. Otherwise really good video with emphasis on safety. Also good tips on adding lube / antisieze to the clips as these are sometimes hard to get out when they have corroded to the bracket.
peacefrog0521 there is a huge difference in the old pad and the new..you need glasses..the new pads are thicker.
Keep up the good work ol scool..I got to do a brake inspection this morning at 10. on a 2010 avenger..that my lady freind picked up for5k out the door it's super nice and clean runs great..it looked the same as if it was 2010
Will it be the same for a 2012 avenger ?
also what about the rotors
old school funk
should I open a bleed valve before I push the piston back
No, but make sure your brake fluid filler cap is off, the master cylender. This will allow no backpressure on your caliper as you push the piston back in. If you open the bleeder valve, you will take a chance of letting air into your brake lines, and then you will have to do a complete brake line bleeding procedure.