Bumper Removal and Liquivinyl Splitter install on Mustang | S550
Вставка
- Опубліковано 1 жов 2024
- ***USE DISCOUNT CODE: MG10 for 10% off any purchase on www.liquivinyl...
Instagram @mannygstatus
What can i say...i'm IN LOVE with they way it looks on my car! I really do hope that this video helps everyone out! If it does, please hit that LIKE & SUBSCRIBE BUTTON! Also, feel free to ask me any questions in the comments down below!
Liqui Vinyl Splitter:
www.liquivinyl...
ALL CAMERA EQUIPMENT USED
Smartphone :
**Samsung Galaxy Note9
amzn.to/2V1WTIY
Microphone:
**Rode Video Micro
amzn.to/2Nh5QLT
Microphone to Smartphone adapter cable:
**IENZA TRS to TRRS adapter cable
amzn.to/2X0ehzo
Microphone to tripod adapter:
SMALLRIG cold shoe mount adapter
amzn.to/2TNxX7E
Smartphone Lense:
**Aukey Ora iPhone/ Android Wide angle lense
amzn.to/2Eg5WR3
Tripod:
**Ubeesize Rubber Coated (waterproof) Tripod
amzn.to/2X6fJAl - Авто та транспорт
Used your discount code. Thanks for that. Saved me $30. Can't wait to get it on my 2018 GT. Ordered with black rods and the side fins.
Heck yea dude, I'm super stoked for you! You're gonna love it, I'd like to see how it looks once it on!!
Steve Reyes did you start getting that engine tick on your 18 yet.. apparently that’s a huge issue and I’m suspending my purchase of a 18/19 GT
What size did you use to make the hole in 16:28 ?
How long did it take for both of you guys to do it? I already have mine but I just want to make sure I got all the tool I need. I just wanted to see your process of work.
!'"[
For this specific splitter what were the drill sizes you used ?
a tip : you can watch movies at flixzone. I've been using it for watching lots of of movies these days.
@Malik Zain definitely, been watching on Flixzone} for since december myself :D
Awesome look...I ready to install mine as well..can i get more pointers..especially when removing the bumper from the side tabs. Where r u located??
Thanks! In the video I do mention that when removing the sides, once you remove the screw, push up and out. Don't just try pulling it straight out. I'm in AZ
@@MannyGStatus ...😎...I'm going to try it..a bit afraid.. I thought you were local in southern California..so I can go bye and u would give me a hand..lol
@@zainflores8246 good luck man! Just make sure you watch the part of the video if you haven't already!
Question can a gt350 splitter fit on a base model Gt ??
He said he had help lol u were the help and even that is pushing it a bit lol
should have reinforced the nuts for splitter rods. with a metal plate under the nuts connecting both together. not a great idea mounting direct to bumper since there will be flex in the plastic bumper.
That's what I did about a week after I made this video lol
What about getting to your oil filter? Lol
I just got my front splitter but I noticed its bent from one side. Did u have same problem?
you’re talking about the same liquivinyl front splitter as in the video? mine came like that too! not sure if UPS had messed it up since they delivered it but it doesn’t appear bent while installed on the car as of now
Thank you for the help ! I did exactly what you did in the video but my splitter bends up a bit from the front center
, I’m not sure if it’s from the rods do you know what I should do ?
That's common for a lot of people actually from what I've seen in person! That was my issue also, but all you have to do is make the rods longer, that way since they're extended more it will push the center down.
MannyGStatus THANK YOU FOR THE FAST REPLY I APPRECIATE IT !
@@rickycarmona1049 no problem man!
I know this is an old video but will this work on a performance pack car?
Yes it will!!
They make 2 different versions of the splitter. For PP and non PP
Looking to buy this for my 2020 Camaro. What substrate this Splitter is made of? I want to get it painted also
Can you still do an oil change,, the splitter is so large I had to question it.
Took it to get an oil change many times after this video and never had an issue.
I cant find the splitter
Click the link in the description. Then its the one that says "2015-2017 Ford Mustang Front Splitter" Don't forget to use my discount code!
also there splitter is sandwiched aluminum, so when you bang up on something like a parking block it will bed and not bend back the greatest. these use this material to save money for sure
f
Awesome install vid. Very detaild it came out good 😁👍
Thank you!!
Your tires are fucked from the inside gotta get the alignment done
Does this affect u from oil change
Nope!
My rubber piece fell off on the freeway too 😂😂
I take it your state is ok with no front license plate ?
Mine is not, and I don't want to drill holes in my bumper. Currently I have a sto n show.
Just don't know how I can have a splitter, and have a front license plate and not drill in the bumper.
Any ideas ??
You can have both. The holes for the splitter rods are drilled under the front bumper, not in front of it where the plate goes..
How long was the installation?
Thank you for the detailed install vid. I like the material AND the gloss black look. But is it just me, or does it now seem like you can't take the belly pan off of your car without taking the bumper off completely? That would be a deal breaker for me. Am I wrong? Thank you Manny.
Are u on stock height?
No, in this video I was on SR performance lowering springs!
Are the rods adjustable
Yup, from both enda!
No one
Not even James Charles
Not even spongebob
Not even Russ (L)
Not even Batman
Not even pouya
Not even drake
Not even trump
Not Tom Ford
Not a single soul:
Me: buys a bumper
Can the rods be extended?
Yesssir! They're adjustable!
Hey, I going to get this splitter but you’re coupon code isn’t working?
Really?? Is the MG capitalized?
Yeah, it says “MG10 does not exist.”
Never mind, I clicked on the link in your description and it works. I thought I could just go to the site and use your code, my bad.
@@abelestrada7819 you should be able to do that, thank you for letting me know! Glad you were able to figure it out though!
Hey man, don’t want to bother you, but do you remember what size drill bit you used? Gonna get my splitter installed tomorrow.
Just got it but it doesn't fit on my Prius any suggestions on making it fit?
get a nutsack delete first on the Prius
Any problems so far?
None at all! Only thing I reccomend is putting washers on both sides of the rods, but I will probably be making a video on that soon!