How to make Solar Mobile Phone Charger | USB Smartphone Charger |
Вставка
- Опубліковано 14 тра 2017
- Subscribe us - goo.gl/JKl5gI
Hello Friends' in this video I am going to show you how to make a solar mobile phone charger. USB solar charger great for charging smartphones. very simple and homemade and great for science fair and solar projects. - Навчання та стиль
First u need some calculation bro, most smart phones required 5v and 2amp dc power. But this solar is only 100 ma capacity. 😂phone ko charge hone me 2 years lagega
thanks, that's why mine isn't working, it's discharging rather than charging
What if ill use 4x 5v 75ma solar panel. Will it work ??
Good
😂😂😂😂
any idea bro yedi esi solar panel se 2amp kaise nikale plz meri duwa lagegi aapko
This will never charge the phone in two years. It cannot even meet the standby current of the phone? Post only after throguh testing
good job. what sort of wire was the blue and yellow one?? where did you get it?? and does this charge other things?
With Avasva plans doing something like that was easy.
Hii
Hlw
Hi :-)
@@shantelleadeline6053 can you give your watsapp number!!!
Miss Universe,you are soooo sweet.
Laura piglets
It most definitely charge your phone at 100% in about 18 years
Superb... Job bro. Nice project I'll try to make it.
nafice ahmad kya kam kya aus ny
nafice ahmad does it works
Futt
Doesn't workss
You need a much bigger panel! A small 100mah won't do. You need at least a 1000mah panel to do anything substantial.
Thanks for your knowledges
bohat acha kaam Kar rahy Hain ap
Bhai solor decter senser b bnao jo k jo k solor panel ko auto move karny k kaam aye please reply zrure krna
What kind of diode are you using?
I'm going to recreate your idea for my school project but I have a problem I am obligated to use PIC and I don't know where to utilize it in any point of this project. Can you help pls🙏🙏
Is the current stable? What type of IC was that?
Awesome! Keep it up!
sir how much cost of solar plate
and what is area of that plate
On what type of board have you attached all the things? Is it a foam board?
ur good work good knowledge of electronics gadgets making
Thanks bro I really make it project
Hey aim also doing this project ...can u help me...
Small tip: make your frame rate (FPS) higher on your camera it will make your videos less glitchy kinda
in fact, 24p is a cinema standard, anything beyond that is often not so respected by cinematographers. In fact, some of them consider 60fps etc. looking like cheap video (soap opera effect). Except Jackson (the hobbit trilogy) etc. there aren't many films in 48p or 60p...
@@pieterpauwelbeelaerts5995 Thank you for copy-pasting that from Quora, Mr. Christopher Nolan
@@Timbhu haha, that isn't my name. And I didn't paste that, just coincidence but here on youtube, you simply have to like the look of 60P. Artistic choice, your freedom. Also... imho, if opinions and freedom of speech is allowed, I would say that camera's that only can shoot 60P (and playback in 60P) to appear good not necessary are the best camera's you can pick up.
Hello, can u pls help me to set up this kind solar panel. I have one solar panel and have only wire behind it i dont know how to use it.
Can you tell me what are the materials you are using to make the Solar Mobile Phone Charger? Because it seems interesting and its a great idea for my school projects with my friends :) thanks
Ic 7805 mobile charger and solar panel wuth some raw black and white chargers but the mobile charges very very slow 2 percent in 30 mins
Solar cell 5v .1
Voltage regulator 5v .2
Usb port 3.
Thanks 😊
Nice job
Is project ne meri khub help ki hai
As u havemade it how much time does it take to charge the battery
My name is nisar your video is best, when your make video tell materials name
Nice
Nice Work.....
nice
good job but you need to add little more appliance bro
Im using Avasva instructions to make it and I do it already :)
Good
can you tell me what is avasva instructions i have listened the name my time
A mi no me funcionó
nice work
thanks
احسنت
Suppose the battery inside your mobile phone is of 4000 mAh. It takes about 40 hours of 100 mA to charge fully. As this is an emergency gadget, use it only when you have no other better option. About 15 to 30 minutes should be enough to turn on the mobile phone to make a few calls or send messages.
You do not need to put the solar panel under direct sun light to get 6V. Normal daylight is sufficient.
If no direct sun amps will be low
Instructions unclear. Hand stuck in toaster
nisar bhai regulater compalsury dalna padega kya,iske pehle maine 1 video dekha tha usne sirf diode use kiya tha
compulsory nahi hai. agar kisi wajah se voltage ya current zyada aa gaya to mobile damage hone ka risk hai.
Technical Nisar thank u bhai
Hemant More
7805 was not working because the input voltage is 6v and I connect the diode 0.7v dope and some wire resistance so it's not work pretty well
I like your project Nisar Keep it Up.........
Thanks.
Making Tricks how mich would it take me to charger my 6000mAh phone
Technical Nisar bro i like to buy for project .. i need it for my final year project.. please contact me asap
Plz make best air cooler
good job boy☺☺☺☺👍👍👍👍👍👍😇
Make a solar panel such that it lies in front of phone, continues solar energy is absorbed throughout day ,there is no battery down.
I make this Thank Youu Technical Nisar
Transister er value ?may be possible from 12v panel? Then how much transistor value
thanks
Can we place a rechargeable battery somewhere in the circuit?
This solar plate properly work only in keypad phone if u have to charge android so u have to increase the no. of solar plate
which Diode you used?
great
I have some powerbanks that need to be recharged when going camping...
Best bro thanks for get this video nisar
which diod are use in this solar panel plz help.
1N4007 Diode used.
if i get a 6v solar panel,what if it won't work,Are there
any conditions for the charger to work except sunlight.
Plzz do reply it's urgent.
My phone charger has 4 wires. Red, white, green and black. How do I connect them to the solar panel?
Bhai USB ki jagah direct Android Mai Jo charger lagta hai vo cable nhi laga sakte Kya or ye regulator kha milega
Does it matter which wires go to which of the three prongs on the 7805 IC? Thanks for this subscribed and liked
Yes they do, they all are made for different purposes
0:30 what's dat small thing??? Diode??? If yes, no need for that since the phone's battery has voltage 'leakback' protection..
Does it work on any NPN transistor?
What is function of 3 pin regulator?
I have 8 watt solar panel which ic I need to build charger
Aapne jo usme black colour ka kit lagaya uska naam kya h bana
What kind of diode did you use, code or name?
1n4007
Nice bro
very nice
Solar kaha se milega.??plz batao meje ai accha bahat laga .???
Nice project,but what diode you are utilise on the solar panel?
1N4007 Diode used.
Hi I want to buy charge controller from loom solar, i am not sure which one to buy mppt or pwm
Buy pwm if you are using 100 watts and below solar panel. Use mppt for bigger projects that uses lots of wattage
how many watts did you buy from the solar panel??
how do you attach the wire to a regulator without a solder?
I’m pretty sure he’s using a more expensive solder gun where you can feed the solder through the back and it comes out the nose of the soldering gun
Super job
uhmmm... what was the regulator and diode for? what does it do in the project? why are these important?
yr Jo soler panel ha ya katny valtage ke ha ya katny valtage agy mobile ko data ha
Very good
Which componants are use?
jobab nehi nice bro
I made it with Avasva solutions.
bhai aap description me sare parts ke bare me Kyu nahi batate
Very nice your Job
my solar panel is less than 6v , how can I get regularly 5v? can u help me please...
You have to find voltage regulator
Why you keep diode in solar panel pls replay fast
Hi i did not try that ,but seems like shouldn't work (numbers on multimeters can not be prove of final project! Thanks
Bhai solar panel kitne volt ka hai
nic vai solar kaha par maltiha plz bolo
Is there a way to increase the Watts?
how safe is this? given that it has no batteries for storage...
Which diode is soldier back of solar panel
I have doing this well, phone pe charging symbol aata hai lekin phone charge nahi hota , what can I do Bai , I use ( 9 v S panel, 7805 v regulator cable etc )
cool les vidéos
sir how ampear,volt this pannel?
Yes Right Question Bro
I need tohe links to the stuff can you plz give me those
Forget about it 🤣🤣🤣
Without ic it would work or not
Sir iski speed kitni hogi? Pls reply karna me banane vala hu
nisar bhai ye solar kitne voltage hoga to mobile charge karega
Bhai diode kon sa he
What are you using to connect the wires? Is it some kind of glue?
soldering iron
sir I have 6v 150 mah solar panel can i make to charge smart phones with out adding regulator
No
No funciona porque el voltaje es el correcto pero tiene muy bajo miliampere hora .Solo prende el indicador pero no carga .Yo lo hice en la escuela y sólo sirvió para aprobar sistemas tecnologicos.
No funciona
Kitne volt aur cost kya h solar panel ke
resistance add krna jaruri h kiya
prashant kumar ha
Cool
I did it with Avasva plans.
Sar.. मेरा सोलर पैनल 10watt का है। मेने ट्रिक तो यही की पर 407uf40w का कैपेसिटर लगाया था चार्ज बहुत ही स्लो हो रहा है डायोड नही लगया था। मेरा मोबाइल 4200mh का है कोई तरीका बताओ plz ताकि 5 से 6 घण्टे में चार्ज हो जाय में जंगल मे रहता हूं । helping me
Is the voltage regulator a must? Can we do without the voltage regulator?
No bro
Not working please help,,,,I have 7805 transtater and charage pen but some problem help