How to make Solar Mobile Phone Charger with 100% FAST CHARGING using LM317

How to make Solar Mobile Phone Charger with 100% FAST CHARGING using LM317
Required Components:-
1. IC LM317
2. Capacitor 1000uF 25V and 1000uF 16V
3. Diode IN5408 and 6A Diode
4. 220 ohm Resistor
5. USB Female Connector
6. Solar Panel 12V 10W
7. USB Cable
8. 10K Variable Resistor
Solar Mobile Phone Charger
Circuit Diagram Link --
drive.google.c...
#solarmobilecharger #phonecharger #batterycharge #solarcharger #fastcharging #charger #fastchargebattery #lm317
Thank You for Watching......

[@almircampos]

Excellent video. I only suggest that a short (one line) explanation about why each component is necessary it would be incredibly helpful. Other tutorials have different designs and also lack this kind of explanation and it make it hard for the viewers to decide which one is the best for their particular situation. Thank you!

[@randhirsingh-pv9yj]

Your this project 100% Correct & True. Nothing have been hidden in this project...You are Great.........You have not mentioned "AMPARE" at output terminals/voltage

[@hitiyiseemmanuel3474]

I highly appreciate this great job, I this is the best way of helping the World by clearly and freely sharing knowledge

[@musobalawrence1466]

A printed circuit board would make construction easier and quicker.

[@cliveklein3076]

What was the Amp output..? Its OK to have 5v to charge but its the current output.. My circuit output is 5v 2.5Amp for quick charge but i do have a surge circuit built in line so my phones dont fry.. 🤣

[@randhirsingh-pv9yj]

Thanx a lot Dear Anurag Ji......Pl.add full charged battery Auto Cut Circuit with this Charging circuit ,so that we can use 100% Fast Phone Charging Circuit For other purpose also......Pl.keep going on...With Best Wishes & Regards....

[@danielrosales1793]

why do you used 6Amps diode in the input terminal going to the positive terminal of the 1000uf-25v ?
will it be drained the mobile phone battery or not ?

[@muneerpk-tl7wm]

No need music very boring

[@anuragprojects]

Sorry bro, will change in the next videos... Thanks for Watching my videos!

[@muneerpk-tl7wm]

@@anuragprojects 👍

[@kimvhermatias3213]

How many watts for 220ohm resistor and how many pins for 10k variable resistor?

[@laksiribandara9887]

Hi anurag.so many thank you for you videos.plaese tell, my solar panel 20w. so if there any problem applying this circuit.please reply me

[@745_NeetaLengule]

please explain worjing of circuit and need of every components

[@rRbha]

Rip his mobile

[@cookingfoodstudio3068]

Nice

[@anuragprojects]

Thanks

[@meassavuth4649]

Hey you , your circuit is not called fast charging , fast charging must be used something to feed back to controller for increase the current step by step , your circuit is using without any feed back , so it can not be fast. charging , your sytem out put voltage is stable and the current will drop when your voltage is up ( voltage up /current down )

[@lleostar5863]

Circuit..much awaited

[@enriquecruzreyes1012]

Excelente amigo! Que amperaje maneja?

[@anuragprojects]

Gracias hermano. Este circuito da hasta 1,5 amperios. Gracias por ver mis videos.

[@anuragprojects]

Thanks bro. This circuit gives upto 1.5 Ampere. Thanks for watching my videos.

[@djdayvi961]

0.6A from solar panel

[@ShivRaj-km7rj]

What is price

[@leopoldofernandezjr.508]

I like ur project. But the input voltage is up to 30v while your input capacitor is only up to 25v.😮

[@anuragprojects]

Hello, you can use 50V capacitor. Thanks for Watching my videos.

[@madanshelke7796]

Readymade solution chahiye

[@kokiabdelrezak9845]

Cheat

[@anuragprojects]

Hi....I can help you....To make this project.

[@HabibaEl_ez]

Hi .. would u help me plz?​@@anuragprojects

[@emadyamlikha8027]

God

[@anuragprojects]

Thank you....