DIY Pine Cone And Resin Scale / Blank
Вставка
- Опубліковано 31 січ 2019
- Making two set of stabilized pine cone and resing.
It's a pretty common blank, I've seen it used many time as handles or turned for pens and so on. Wanted to try and make it myself because I really like how it looks and now with the vacuum chamber and pressure pot that I built in previous video I have all tools necesarry to hopefully make it work. With the second set I did a better job at centering the pine cones and I also like better the contrast of orange and purple dye. With the first one I notices some tiny bubbles still present near the center of the pine cone so with the other one I tried to degass the whole assembly with the vacuum pump before the resin had a chance to thicken up and then I place it to cure under pressure. But, as I have already notice in another video while making micarca, that had very little effect to the end result and I still had a couple of tiny holes in the center.
All materials for this project kindly provided by RESIN PRO find everything here:
www.resinpro.it
www.resinpro.eu
www.resinpro.es
www.resinpro.de
www.art-smola.ru
And use code: "blackbeardprojects" For 10% off your orders (affiliate marketing).
Process of stabilizing is shown in details here:
• Stabilizing Wood With ...
Video about making the vacuum pump and chamber:
• DIY Vacuum Pump And Ch...
Video about making the pressure pot:
• Pressure Chamber | Res...
Video about pressure vs vacuum in composite materials:
• Composite Materials : ...
Index of operation and materials:
0:15 Drying pine cones with pid controlled oven. 12 hours at 120°C (248°F)
0:27 Taking pine cones out of the oven before it cools down and placing it inside a sealed container so it does not absorb moisture
0:40 After the pine cones are cool completely covering in stabilizing resin
0:55 Slowly raising vacuum to prevent excessive bubbling
1:12 Taking to maximum vaccum and holding it for 4 hours or untill bubble stop rising
1:22 Slowly releasing vacuum then leave to soak inside the stabilizing resin overnight (12 hours)
1:45 Packing each piece individually in aluminum foil
2:06 Lefover resin can be collected and used over and over
2:24 Curing resin (stabilizing resin activates with heat) 2 hours at 95°C (203°F)
3:10 Removing excess resin
3:30 Grinding a flat side on the pine cones
3:45 Silicone mold and 3d printed petg holder box
4:00 Mixing epoxy resin (following manufacturer instructions)
4:14 Adding few drops of resin dyes
4:54 Mixing two glass of different color resin
5:20 Pouring one color on each side
5:33 Stick to hold pine cones down
5:41 Resing left to cure overnight under pressure to mitigate bubbles
6:37 Cutting eccess pine cone on band saw
7:05 Squaring up the blank to mark a precise center line
7:37 Cutting the blank in half to use it as scales in full tang
8:07 Sanding flat sides with sandpaper on a piece of flat glass
8:33 Sanded up to 320 grint and applied a clear coat to simulate mirror finish
9:26 Can be used matt if not buffed to a mirror finish
If you don't know where to find dyes and silicone mold here you go:
blackbeardproject.page.link/R...
blackbeardproject.page.link/S...
Yes, these are all affiliate links, buy wherever you want.
I found the silicone mold searching for soap and bread mold.
The one I bought are 16.5x7.5 cm (6.5x2.9 in) but I find them to be a bit short now that I've used them for some blanks.
The one I linked are 24.6x7 cm (9.7x2.8 in) and come with a wooden box ready to use so you don't have make one (or 3d print) like I did. But I haven't tried that one out so I can't guarantee for quality. Find one that fits your needs!
I bought the stabilizing resin here:
Cactus Juice: goo.gl/6M2odZ
I don't have any affiliation with brisa.fi but they offer a nice and fast service. Highly suggested for Europe supply.
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects - Навчання та стиль
Be sure to check description for list of products and operations.
And if you like what I do consider supporting me so I can keep on making. Join as channel member or check my Patreon for early access and voice-over edit of my videos. Thank you!
knife handle ^^
Эхх жаль что ты не понимаеш русский я бы столько хотелбы тебе сказать
Do a handle pls
@@user-cy3rx6xe3x скажи мне)))
Great work and very beautiful
Do I find you have a half-circle of epoxy mixed with wood?
the blue and green one is my favorite, always great to see what other's minds come up with. Stunning, would be amazing as an Athame handle!
One of the most beautiful things i've ever seen, true art.
It truly seems like everything you touch turns to gold!!
Zenmasterme
hello
These scales with a Damascus knife would be a perfect match!
Your right
Yeah that is awesome i have been really wanting to know how to stabilize those and how to make resin epoxy scales thanks for the lesson great job they look amazing and great video 👍👍
Well done! Always a pleasure to watch your work. I like the clear look very much, I haven't seen that too often. I'm actually (hopefully) getting new video out tomorrow with a knife with something similar for handle.
A very instructive video always wondered how stabilised wood was made. Now I know, great job.
Amazing video bro! I love your projects! They push us to new heights of what we feel capable of...
That looks fuging craaazy!
Damn dude nice work.
Neat! Those would be killer scales for a straight razor. Thanks for sharing!
Smacky Gamer
hi
I stabilize the cones with red-dyed resin. The cross-section of such a pine cone looks brilliant, something like flames! Regards!
Awesome video. Very informative and interesting. I love the way you show the steps you take. Thank you.
Yet more beautiful work thank you for posting
Wow, man! Those are beautiful. I really enjoy the look of the lack of center in the one blue and green one. Looks like hovering pedals. Great work!
THAT WAS SO MUCH FUN TO WATCH!!! LOVE THE SUPER FAST AND DANG THOSE THINGS LOOK COOL!
Oh wow, i absolutely adore these. Thank you.
Cant beleive you bought pine cones!
@Mike N. yeah but they can probably find some pine *trees* if they try.
@Mike N. I can confirm .this is true an sucks ass 8'(
@@mgtowanonymous3120 Man, my back yard seems so much more valuable now, lol.
Ooooo... I like the orange-purple scales the best. Good show man!
Brilliant result and absolutely unique 👍
Oh man, you are really creative. I like this!
These are amazing!! Man I'm a woman and if I had all these tools and equipment I wouldn't sleep for days!!!
Wonderful. The best thing i have seen ❤️
Really cool. I may have to build a vacuum pot and try some of this. I saw post where somebody did this with pot scrubbing (scotch-brite?) pads. I've seen them in green and blue. Maybe there are other colors too. The blue turned out amazing with a unique, almost sparkly, look. Endless possibilities
Nice save on the repour .strain everything..thanks for the upload..
Those are very nice, cool idea and great execution!
They really are quite beautiful
Wow! That’s pretty awesome 👏 ThankYou for sharing 😊
That big chunk of plastic coming off the pinecone was so satisfying for some reason.
That was tree sap
@@aprilcory3815
Oh, that makes sense. I was wondering what that was. I watched the vid on mute maybe that's why I didn't know lol.
Very well done brother!! Love the refrigerator vacuum pump! Made a one years ago like it for servicing A/C systems in vehicles. I’ve been looking at stabilizing and i think ill have to make another one instead of forking over the cash. Oh and if you need more pine cones i live in colorado I’d be happy to walk out to my yard and pic a few up for you! Great work as always!
nice 3d printed silicone holder box. that's pretty neat, bet you thought i wasn't gonna notice
The sneezing at 8:39 is so cute lol bless you
Beautiful resin scales!
Wowza gorgeous , could make a mood night lamp out of those , no need for lava lamps after seeing those !
U r a genius. I am so impressed to say the least
👏👏beautiful my friend, congratulations
Beautiful. Thank you for sharing
What a wonderful pot
The amber colored one is perfect! I'll be interested to see what you put them on... I'd probably make a nice camp chopper with a good sized handle so you can preserve as much of the cone as possible... plus it fits the theme.
Im so glad you slowed it down at 3:16 haha i was hoping for a big chunk to come out, great vid!
That looks awesome!
I don't know what you would use those for, but dang, those look amazing
Knife scales
This is amazing man
Those are gorgeous
Thanks for sharing that, well done
Beautiful😘we want more...
PLEASE do more resin projects!
Looks greate
Thanks for showing.
Dang ! Those look slick !
Awesome work! Thank you
I hope we get to see these used!
and if the knife had some engraving, matching these scales, that would be very cool.
Really nice, clever👍
I've never seen anything better than your micarta...until now. You are the best craftsman on yt! Greetings from Poland
Best video yet thanks ya'll!!!
MARAVILHOSO MESTRE.... PARABÉNS...
Very Cool indeed, Well Done !!!!
Nice work!
So beautiful.
Excellent job !!!!!!! Looks amazing !!!!!!!! Thanks so match !!!!!!!😍😍😍😍😍😍😍😍😍😇😇😇🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗
All be damed, That"s cool. Never seen it before.
Beautiful!
That’s sick I don’t understand the process but love the outcome
Very nice one dude.. tq for sharing this video
Baked Pine Cones, my favorite.
Cool idea! Making at height 👍
Very good diy
Gorgeous.
love your work ,,man
Very cool nice job
yer gettin it! keep it up brother!
Outstanding !!!
beautiful
Beautiful 👍
cool vedeo you are a artist for sure
Very Nice job My friend
Those are pretty sweet scales man! You need to make a bushcraft knife now!
Awesome informational educational video experience Y'alls God Bless Ya 🙏
Beautiful
Those turned out great. What type of knife will you be putting them on?
Thank you my friend! Have no idea yet 😂
@@BlackBeardProjects , it can only be a knife of total baddassery from our infamous creator! That's just a given...
Orange ones because of the tree that drops resin
Came out look in great. Since they are not opaque I would put liners behind them.
Amish Outlaw great idea.
Im waiting for the new knife 🔥🔥🔥
Those are badass
Very nice 😍
Amazing!
Stunning! I would really like to se those on a knife - next video, maybe?
WoW...just Wow!
(لا إله إلا الله وحده لا شريك له، له الملك وله الحمد، وهو على كل شيء قدير، سبحان الله، والحمد لله، ولا إله إلا الله، والله أكبر، ولا حول ولا قوة إلا بالله العلي العظيم، رب اغفر لي)
Did you make the pressure pot to for casting the scales?Good job.
Love your work..get a clip on blower for your saw..
I've just bought myself an amazing t-shirt 👕😁
Amazing 👍👍👍
Wonderful!👍
Very good!!!!!
N1 Händlers for a knife amazing
Those would make some beautiful stained glass windows next to a beautiful wood carved door.
Great job 👍 👍 👍
Martin Wolf
hi
Another wolf just like me🐺
Very cool
Amazing
U do good workI.
Awesome, Nice.
You could use a few LEDs at the bottom to use these as a night lamp.
Or maybe even install LEDs all around a frame and frame them.