Umarex T4E TR50 C02 Paintball Revolver Review (Shoot foam darts HARD) | Walcom S7
Вставка
- Опубліковано 8 вер 2024
- I bought a thing that had little to no NERF value except I knew it was a .50 cal paintball revolver that would fit darts and it used CO2. It's insanely powerful, incredibly cool, and it's completely useless. It can't be taken to any war, and it destroys darts like none other. That being said: it's super fun, and it has potential to be a really strong 6-shot double action revolver for half-darts.
MUSIC: Ragnarok Battle Offline
LIKE & SUBSCRIBE HERE: bit.ly/Sub2Walc...
WATCH MY TOP VIDEOS HERE!: bit.ly/WalcomS7...
FOLLOW ME!
FACEBOOK! - / walcoms7
TWITTER! - / walcoms7
FUZZY WALRUS INDUSTRIES DISCORD! - tinyurl.com/FWI...
Fan Mail Address:
WALCOMS7
1673 S. Market Blvd #10022
Chehalis, WA 98532
About Walcom S7:
Building things that shoot foam darts incredible distances, extremely quickly, in insane quantities.
When it comes to blaster reviews, mods, and discussions; look no further than Fuzzy Walrus Industries.
Walcom S7
/ s4league
1,000 likes in about 8 hours. You all rock. Thank you so much.
Pronounced "youm ar-ex"
You should use ear protection. You only get two.
@walcom S7 Yo if you take the break barrel revolver you recently showed the 3d kit for...and pull out the metal BB barrel you can then drill it out and throw a brass barrel in it and make it a single shot with no kit no nothing...just a drill bit and a brass barrel... (however i recommend using way longer than 12" or youll explode all the darts
This is the secondary you use when people don’t call their hits
ddbuch110305 I know right! This isn’t news if you’re familiar with the air soft community
Skip the foam dart at that point.
Walcom S7 It's high noon.
Eh 50 cal paintball is meant to be low impact it doesn't really feel like much so nerf darts wouldn't be as effective
@@the_giraffe3342 Low impact? This sucker hits like 380 FPS with a fresh cartridge with .50 cal paintballs. A nerf dart on a weakened cartridge hits over 400...and with a full one it's scary. It punches holes through entire cardboard boxes.
guy brings paintball gun with half lengths stuffed in it to hvz.
Everyone: wally no
Walcom: WALLY YES
hahaha rip lol
@@domjones8653 half lengths as in one half of the ball is ball and the other half is cylinder fins?
This is one of the weirdest videos I've done. What's it useful for? Practically nothing, but I think it will also give a few talented people some ideas as well. If you do want one of these: don't be stupid. This thing is dangerous.
You can also shoot self defense ammo out of it like cs gas, salt, and pepper spray. It will stop an intruder without harming them.
@@runkurgan*I T S N E R F O R N O T H I N G*
T4E is the product line as there are others like a HK 416 T4E, and Walther PPQ T4E markers. Umarex makes 2 other versions of this revolver. One in 6mm Airsoft bb and the other is in .177 caliber/4.5mm bb and pellets.
The airsoft one is called the H8R revolver
Darkshock 42 MLG 0 - which is what it is being sold for in Europe. BTW there are bb and airsoft versions.
This thing is insane. I love it. I want one, but will never have use for it....ever.
Yeah...
@@WalcomS7 I'm 13 years old, can I buy it because it's an paintball gun or it's like airgun bb gun?
Mines in the mail now....along with the upgrade kit and barrel to crank the power up to 20 Jouls instead of 7. The gun looks awesome to FTW!
Also most of the time the paint balls will break in the gun....even in the low power version 😂
When I saw the Title,I thought of;
*Has this Man Gone Insane?*
Alan Jason S. Batenga he has, but quite a while ago
Saw the title
Me: it won’t shoot that hard
445 FPS
IBUTTERMYEGGROLL 330 fps
Well it hit a high of 445
Pretty normal fps for paintball and airsoft guns
Laughs in 3m drain cleaner.
I KNEW IT! I knew this would happen.
Also worth noting, CO2 based projectile senders will have a fairly dramatic drop in FPS with rapid firing due to a temperature-pressure thing.
Also #2, make it break action if you're gonna cut it there
That would really complicate things but I supposed it's not impossible.
Yeah, I don't know enough about the mech to really comment, but I can't imagine it being too many orders of magnitude more complex than a break hammershot.
You have NO clue. This ain't no paint ball gin as advertised. It shoots rubber . 22 caliber blanks that explode on impact. Also the rubber steel bearings will duck you up bad. This ain't no good for nothing paint ball 🔫 Bet it will drop you to the ground in severe pain. Paint ball... My ass
Love this revolver for shooting Homemade Hot Glue Slugs, making a slug maker out of a Wooden mold, using BBs in the head of the slugs makes them fairly Heavy, adding a Rocket Valve, up's the power level from 7.5 joules to 11 joules. Making it much hotter than stock.
Please could you make a video on how to do it? I quite didn’t understand how you reach 11 joules..
You have to swap out your 7.5 joule sir valve for an 11. Good news, a new air valve is only $29.99, but changing them is a real bitch. I used a lot of strapping tape and cellophane wrap, worked like a dream.
For when you need home defense, but just want to maim
Yeah, no. Just use 12g bean bag. (I know you were joking, but still).
Nah man if you want to maim
rock salt
Maiming gets you sued, rifled slug leaves only one side to the story
10/4. Rubber . 22 caliber blanks explode on impact. Bad ass gun.
@@rbrookshgm7907 yea, one side of the story, and a dead neighbor lol. Why would anyone use a slug in a shotgun for home defense?? They wouldn’t…
Me: watches*
Also me: thinks of russian roulette*
We already have modded Strongarms
_don't take this too far_
50 cal tends to have higher fps caps than the standard 68 cal due to the reduced mass of the projectile leading to reduced muzzle energy which is what really matters. These get used at magfed games in the UK all the time without issue.
Instead of modifying the frame you could just cut the half darts again to make like, 25% darts.
Not a fan of having specialty non-standard ammo for things.
Walcom S7 Like you said, you can't really use it in public. Too each their own though
@@WalcomS7 just use the heads ;D
@@WalcomS7 Does it make more sense to hack apart your $100 blaster to shoot standard darts, or cut down some 5 cent darts to fit your $100 blaster?
@@tsmcgu The latter, as just shooting dart heads isn't shooting darts.
You should credit the guy that's already 3d printed an attachment for a co2 revolver to shoot 6 half length darts.
You act like I knew that was a thing before I made the video, because clearly I didn't.
Walcom S7 that's fair, I'm sorry.
Cant seem to find the adapter any information
It’s really just a paintball variant of the airsoft h8tr revolver, also by umarex
Oh, I kinda want that now, 2 of them, and some spinning skill
Go to the umarex website and look at em
@@Fatboi_travis it was a joke, do kinda want to see if my local store has one though, I was basically saying I want to be revolver ocelot
Catsinelixe Holloway I understand that, are you an airsoft person yourself though?
@@Fatboi_travis yeah, I have a pretty good setup too, a GBB 1911 (forget the make and model but it's also just my sidearm, and I want to upgrade to something that I can fully spec out, probably spec it similar to speedsoft builds since I usually go fast at my local field getting the objectives since its layout is horrible for finding routes to avoid a million different sight lines on your position when clearing areas) and a Vega Force VR16 calibur CQC with an extra mag (high capacity based on a quad stack mag) magpul flip up irons (I also have a red dot but I don't use that on the field because it can be easily damaged if hit), a number of internal mods bringing it up to the max specs allowed at my local field, and a number of external mods like a black flash hider (I kept the orange one it came with though for outdoor fields and my great grandparents back yard), HK416 stock, non stock grip, trigger guard with finger rest, and because I'm a girl and wanted a likely unique mag color at the field, pink tape marking my magazines so my mags don't get mixed up with someone else's gear by accident if I led someone a mag who ran out of ammo on the field. And that's just my main guns, I also have a sniper I am working on and a bit of gear that I wear too like a mask with a great field of view
Umarex designed this as a self-defense non-lethal weapon. The slap button on the bottom of the grip is to activate quickly after being stored fully loaded. The ammo that Umarex showed with it's launch was rubber balls and pepper balls. Yes it also shots paintballs but that was not the original idea. They make a very similar version of this gun in bb and airsoft but it doesn't have the slap button but does have an external hammer.
Do it. It's hitting as hard as my caliburn. That's amazing!
*I’m sorry what*
@@Pineapples0723 yeah. I have a full aluminum machined caliburn with a k14 and a 24 inch barrel hitting 430 fps.
@@NavySeabee333 That’s just hilarious. A true piece of art!
That’s pretty much a self defense weapon at short range
In my opinion, that' a *_RAILGUN_*
I see no electromagnets in it, don’t woooosh me
This is actually a variant of the umarex brodax BB pistol I own two of them and it's one of my favorites the rail on top and bottom give endless tactical variants
By the way they also have a co2 powered BB barrel shotgun that should also be of interest because it is of the same caliber and barrel size as this I would like to see you do a review of the t4e HDS from umarex as I think you'll be very happy with it
Next thing you make 50 cal blank using nerf darts.
That thing is insane, lol, also it already looks like a real gun, and the no hammer still works, my mom has a Smith and Wesson airweight hammerless (which is really just an internal hammer double action)
This pistol is one of many coming out now for the Self Defense market, not for "play". Its meant to use Pepper Balls (either Capsicum powder or Capsicum liquid. The CO2 cartridge not automatically pressurizing is so you can carry it for self defense without the gas leaking. There are other versions of this that are one or two shot darrengers, or a more automatic pistol design, and are supposed to be more effective, safer, more accurate, and more user friendly than traditional pepper spray cans and stun guns.
We had a ref at our field who used a pistol like that when he noticed people not calling their hits. We were playing airsoft. I watched it put cracks in a dude’s riot shield. Shits scary man
Got i since years and love ist!
Better paint it to not be solid black
Even then, don't take it out in public.
mineguy 2015 why?
@@jeffbruh3253 all toy guns need orange tips and OBVIOUS Indicators that theyre toys when outside of a proper play field or else bystanders will think youre actually carrying and call the police. To avoid this kind of trouble just dont paint your guns all black to make them look like real guns.
I’ll just paint it all bright orange.
The orange tip is not required in Massachusetts; the tip must be "brightly colored". If I'm painting a blaster, I like to make the tip a Day-Glo yellow (the other popular high-vis color) and use a color scheme based on the Dart Zone waffle-tips I am so fond of (dark blue with bright green highlights).
Fun review but FYI its a home defense / training pistol. Hence the lack of velocity adjuster screw and it firing hot.
*Cinematic intro* oh beh beh this i’ll be a juicer
Look up the Crossman 3357. Does the same thing, but is vintage paintball circa 1988. I had one a while back. a real fun shooter, and a conversation piece. the cylinders were larger though
In europe it is called the hdr .50 (home defense revolver). you mainly use it to shoot rubber balls or pepper balls with it. there are also some modded ammunition made with steel parts in rubber balls. there is also a pepper spray thing you can put on the bottom rail. it´s not really meant to be a paintball gun for paintball games. because of strict gun laws this is more or less one of the „strongest“ guns you can buy without a permit.
Alright, since a lot of people might not get the actual purpose of this thing and why it has some specific features like the quick pressure system. It was designed as a home defence weapons for countrys like germany or other EU countrys that do not allow the ordinary citizen to have a real gun at home without a special license. In Germany for example there is an muzzle energy limit of 7.5 joules which is roughly 5.5 lb-ft. You usually have the "gun" ready in a drawer with a cartridge in it (but not pierced) and when the worst case happens and you have to use it you can quickly pierce it and do whats necessary in regards to the situation you are in. It looks like a real gun to intimidate your opponent. They specially designed pepper ball ammo and other types of ammo like rubber balls for it. This is not a paintball gun for playing on a field. Good video btw!
That looks so cool and I want one now.
I've been curious how many shots a CO2 container like that could manage but wasn't sure where to ask, so thanks for answering that. If you can also find a way to reduce the FPS though I'd be eager to see a follow-up video.
god I hate it when I order off ebay and the send me misshapen balls XD
I am getting one of these, painting it mainly white with an orange tip and red grips, doing all the necessary cosmetic mods to make it look like a Dan Wesson PPC. 357, painting a playing card spade on the barrel shroud, and calling it the "Discard".
*has a tired, mindblow/mindgasm moment* not only did that shoot really far
it looked
like it was
really frickin' accurate
It is useful for self defense with pepper balls. But I'd be interested in seeing it fitted for half darts.
Non lethal self defence option. Shoots rubber riot balls, slugs, and pepper balls. Also has the quick charge co2 - great for when you want to defend yourself with less than lethal force.
Dude, it's only a "paintball maker" to market in localities which discourage "self-defense". It's highly modifiable in terms of power, up or down though. Frankly, I think it's more fun as a tuner for blasting the crap out of targets in backyard range.
Yeah. Wow that hits hard my old tippmann and spyder don’t hit that hard. I still have all my paintball stuff since the sport died here in Oregon as well. Great video. I’m not sure it’s really worth modding like you said looks to real (you know how people in Washington and Oregon react 🙄)and hits to hard. But I’m game to watch if you decide to. 👍👍🤘🤘
Either that or it'd be a decent less lethal home defense tool. Can hold a cylinder in it, I can pop the cylinder easily, and fire off 6 shots. You know, in-between reloading my 12 gauge.
Walcom S7 yeah I’d go with the actual lead home defense situation. Since Washington would rather throw the book at ya. And dead people don’t usually sue. Well they’re family’s sometimes do.
You can put those little thumb tacks with the long plastic on them in the nerf darts little glue and you have a home defence weapon yes I have tried it and it works.
dude HDR50 (HOME DEFENSE REVOLVER) yes it can be used as a paintball marker but in the U.K. and most of Europe where it's very difficult if not impossible for citizens to own firearms it is used with pepper balls or hard rubber balls as a nonlethal means of home defense
I bought a .50 mold to make my own projectiles. 9mm steel ball bearings and then use a top off of glue from a hot glue gun to make a sabot. I have been experimenting with different scattershot rounds with 7 .177 BBs in a wad and glue sabot. The rubber riot balls just bounce around everywhere. I have a laser sight and this gun is quite accurate at 15-20 feet. I wouldn’t want to be hit with this revolver.
Having no hammer helps with quick draws; like most real revolvers designed for concealed carry.
Hey man, I like where you’re head’s at. I think free thinkers help advance the hobby. Keep up the good work man.
truth, it wasnt meant to fire paintballs either. Umarex made this for home deference shooting 50 cal rubber balls.
sense 50 cal paintball is a thing, paintball sellers started selling it for such. meantime it shoots at such high velocity most fields wont let you use it, unless modded.
standard paintball velocity is 280-300sfps. out of the box and on fresh co2, it shoots 360-380fps
Holy crap that thing is terrifying!
I love that you have to load it like a musket
That'sa spicy meateball
I can already imagine painting and modding this to be a hand cannon from destiny
I wonder if this could fit airside pellets? SHOTGUN REVOLVER PISTOL!!!!
i like the aesthetic of the revolver
That gunz soundtrack opening though....brings back memories!
Does the back of the cylinder a separate piece if it is you could possibly remove it and just 3 print a cylinder or as you said glue the cylinders together
I'm not surprised that the next video will be walcom using a gun to fire nerf darts
50 cal rival esque ammo would probably work amazing in mag fed paint balls! There was a thread in r/Nerf where someone made a 50 cal foam ball.
smile.amazon.com/Reusable-Rubber-Caliber-Paintballs-target/dp/B00AJ4PSHM/ref=sr_1_13?crid=2C1UNNYXM3IG8&keywords=50+cal+paintball+marker&qid=1557585197&s=gateway&sprefix=50+cal+paintball+mark%2Caps%2C160&sr=8-13
*orders a paintball revolver* 2:18 THATS A FRICKING REVOLVER!
Yeah that pistol splat marker is no joke. I discovered a while back how hard it shoots darts.
do the thing walcom
There are stray cats in my yard all the time this would be totally perfect to play off as scaring them with a toy xD
Cab it’s use 68.cal paintball or 50.cal because it’s says both on amazon
Hey walcom, airsoft revolvers use shells so maybe with some drilling in the barrel it could shoot stefans with the cylinder and since its airsoft it should be lower velocities too, the specific revolver I've been thinking about the smoke wagon but you can use other sheep ejecting airsoft revolvers
Walcom, guess what, today is National Train and Locomotive Day, May 11
I love revolvers
I really dig the looks of this revolver, reminds me of something like the unica 6, very cool
Inspired!!!! and found 50cal soft foam ball rounds. I salute you walcom
Ouch! To say the least, what ranges are you getting with half darts?
What if you shoot just the tip of the darts and put them in the cylinde.
You could, but, yeah.
Man, you’re lucky u could get this there. NJ doesn’t allow any CO2 blasters at all. Even if they blast foam and not BBs
Damn, that voice when you were imitating the... let’s say passionate commenter, was pretty good. You’d be a good voice actor.
i wish i could help your predicament out more but i can only like once my man
i think it will be great for airsoft
What would happen if you cut the darts to fit the removable cylinders? How much foam would still be attached? Your idea sounds good too, I'd love to see if it works!
Probably just the tips.
Walcom! I know it's probably unimportant to you, but I thought you would find this interesting! That gun is a complete rip-off of the airsoft revolver called the H8er made be elite force!
Not saying because its a rip-off its bad, but it's totally stealing features from the H8er lol.
Well that's one way to shoot a dart 300+fps
I mean, we do what we can.
I hope I’m not the only one ready for the stream
Dude, don´t destroy that beauty please. Just bring more videos using it.
It's not actually advertised as a paintball revolver. This is a less than lethal self defense weapon. Paintball only shoots at 285 FPS for recreational play. Competitive play shoots at about 300 FPS. The T4E TR50 was designed for the use of .50 Rubber ball, Pepper ball, and many more that the market offers. Yes, this will fire .50 paintballs with the base 7 joule model. The higher end models of the TR50, will not fire .50 cal paint as they will pop inside the barrel.
I think there’s A way to make a jolt magazine fed. If you have a magazine attached to the jolt but with some sort of rod applying pressure towards the barrel constantly every time the barrels empty do you just have to push the magazine into place it would blow the dirt and then pull it out
You're a real one for using the RBO ost in your video lmao
Well, I see I’ve found my new primary
Wait I have to ram rod the darts? And they explode? Well that sucks
Well I do CA relatively decent used for it that I'm sure many of you have not thought of just yet but it is a very viable non-lethal self-defense weapon I mean those paintballs are supposed to be moving at 307 feet per second that is going to hurt and definitely deter someone from doing whatever the hell they're going to do and personally if I wanted a non-lethal option for home defense that would actually be a viable use cuz I'm you smack someone in the face with that two or three times or even once for that matter they're going to exit the house in a very big hurry so just as an idea ^^
You should try to load Dart tips in the cylinder
UntouchableBear yeah, it looks like if you cut off the stem thing on the bottom you could fit some dart tips in there.
These would be a ton of fun in the house.put a pencil eraser up each dart for better accuracy and more punch.
All you need now is a csgo skin for it
I would much rather have the gel blaster excited to see what you do with this
At 0:44 he goes full dr robotnik mode
A bit off topoc BUT i was thinking of using capacitors as darts. Can u imagine being hit by a 300v dart in the leg? I made a taser glove w the same caps. It worked well.
first thing i want to see is a dart cut down to fit in the tiny cylinders.
i think if you can get away with cutting in to the fo cylinder and shorting it, you could use 2 of the cylinders with brass in the barrels so the front rotates the whole thing and the back just sits on a post like a nail or pin.
Just cut the waffle heads to fit the stock cylinders. It'll barely be more than the head but at these pressures you are destroying the darts anyway which will make them fly unpredictably so ya might as well just shoot the heads
This might be a dumb question, but can you pull the tips off darts and put those in the cylinders and have it still work? That would remove the need to risk destroying it to modify it.
Hitting with food dye is not allowed at 300fps but hitting with solid plastic balls at 500 is ok.
Very strange.
These are Awesome, So many Accessories and Upgrades available for it..!!!:-)
The UK version shoots a bit softer to make it comply with our airgun legislation.... bonus being it's FPS means it can be used on a paintball field. Still shoots at 5.5ft.lbs ish though.
Hey bruises are fun but actually hurting people is bad-walcom
I wonder how effective it would be for self defence to shoot dark red, stupid high fps paintballs from a realistic looking paintball gun as a youv been shot placebo.
do a collab with captain Xavier modifying it
I have an airsoft pistol that is basically the same
lets just have a vidio ofyou playing with your cat