Wow!!!!! I thought I wasted my money on this unit. Thanks to you. It’s not a waste of money. Your instructions are so clear. You talk at the right pace! Excellent work thank you so much.!!
FINALLY! Something that utterly clarifies & details all of the inherent mysteries of the External BT TPMS units! It took me far too long to find your video & learn how these sets work. Thank you for sharing!
AT LAST !!!! Seems like the only person in the whole world that knows exactly what setting 6 means!! Have searched EVERYWHERE to no avail until I found your video..well done sir and a thorough "walk thhrough" of how to pair them..A BIG THUMBS UP to you😊😊😊😊😊
It wasn't cooperating with me when I got it in from shipment so i did a hard reset from the manual but it only made it worse. It's only picking up the front left and rear right. Hopefully your video saved would save me from running it over. Thanks bro .awesome on point tutorial!
Aside your magnificent explanation, your pronunciation and clear diction makes more valuable your video. Tanks. By the way, I paired the sensors successfully
I was trying to figure out pairing when I came to this video, it didn't work but then I went to my manual and it said drive to 20km/h and they will all auto pair, indeed they did. Good video explaining rest of the features
Thanks bro you really save my life i was totally exhausted trying to pair the 4 sensors .. it was giving me low battery symbol but after pairing by your way it finally worked .. thank you very much 🥰
Tried your tutorial but still same problem tpms is not pairing with the sensor. Also tried to check the batteries with voltmeter no problem all all are reading 3 volts. What seems to be the problem. Thanks
too good... really trouble shooter... as I could not get the reading... I paired as per your advise and it suddenly it started showing off the reading.. so thank u so much for saving my money as I was about to throw it out of the window...
Thank You .... awesome turorial mate... good job with the crystal clear explanation. been suffering from acute headache for the past 2 hours upon opening the box and now the headache is now gone instantly. keep up the good work. cant thank you enough.. u save me from another white hair 👍👍👍
Thank you so much for doing this video! I went and checked all my batteries and labels. They were correct. 🙂. The readings for me were off by like 1psi not too bad.
Very well explained...thankyou. Is there a way to 'delete' 2 of the Sensors. I am putting these on a Caravan and only want to see Sensors 0 and 1. I would rather have Sensors 2 & 3 completely blank rather than have them 'flashing'.
THANK YOU DUDE...Your tutorial save my live, it works like a charm, after trow 3 of this ones on the trash, for dont know how to solve this problems! Thank you, thank you alot!!!
Thanks so much for your tutorial. A great help. I do still have an issue with the display showing the wrong values. Especially the C,* temp. They vary sitting still from 7C to 27C . Its like it's stuck. Could the sensors be stuck,?
Thanks this is a good video. However I had already installed the adaptors onto the tyre stems. Now they seem to be stuck... Also I can only pair two of the tyres I kind of wish I hadn't bothered if it was going to be this much trouble.
this was a great explanation on how to use this. I am wondering if you can answer a question.. my unit instuctions says "pressure copes 14-87 PSI". I am wanting to use this for a small tent trailer single axle. (I don't find the range anywhere, however hoping this is possible..) I am about to purchase new tires but I have read that often max PSI for trailer tires is 85PSI (and I have seen at least one that was 90PSI). Does that mean that this unit will not go higher than 87PSI? Therefore it won't work for higher pressure rated tires? Also, when I try to program the low end of the PSI, the highest PSI I can put in is 35PSI which would seem not to help at all with the higher pressure tires. I don't know much at all about tires, but any help you could offer would be appreciated. Thank you for the excellent tutorial!
Thanks for the video. In my case I have the small cigarette lighter reader plus 4 sensors. One of them needed to be replaced and I had a spare but only showing flashing 00
Hi, first off, thank you for making this instructional video. One of my sensors unfortunately suffered from water corrosion and I subsequently purchased a replacement unit. However , after following the steps you showed to pair the sensor it was to no avail. Suspecting that perhaps the battery was faulty I even switch to one of the existing batteries which are in working order but still was not able to pair it. Is there anything else that I can do ? Instead of scanning for it can we manually set the number ?
Love the video, as we have installed this on my caravan the signal is too far from the dash to the sensors do you know if I can get some sort of signal booster.. thanks again for the great video
Aha mate, these cheap ones don't come with a booster or a repeater. You might want to consider getting one from TyrePal (www.tyrepal.co.uk), it's more expensive but they make ones that are specific for for caravans.
What do you think is the matter when the RR pressure on the reader just isn't showing anymore? This is just after about 2 weeks of normal display. What should I do?
Very helpful sir I thought i wasted my money bcoz d one sensor doesnt respond always zero and unaccurate..same prduct on ur vdeo.the solution is just a matter of pairing all d.sensors.
Hi I have MG ZS 1.3 turbo , now I have facing the problem for TPMS fault . How to reset this fault . In steering wheel which button for Reset ? Can u guide me to sort it out .
As far as I know, you cannot calibrate these sensors and they're not really very accurate. They work best just to sort of tell you "roughly" what the pressure is. I mainly use mine so that I know if I have a sudden puncture while driving and for actual pressure measurement I use a pen-type pressure meter each time I pump up the tires.
Hi I never explain myself right can you tell me what is the maximum bar or psi does his equipment go because on my motor own it will not take it up to 80 psi thank you for your time
Thanks for the video Bro! Mine only couple months old but since day 1 the FR always shows 6 psi more than the rest i took them off today and factory reset it, not the sensor ID are all showing 00.00 and wont pair. Any idea? Pretty sure it's not the battery as it's fairly new.
I have the same sensor but on a motor cycle so only 2 sensors and a small main display....the front sensor will not connect with the main unit.....the battery reads 3v on my battery tester.....any ideas guys.
Good evening, the video is very good. Thank you for giving us your knowledge. a query, perform all the steps but the sensors do not send a signal to the screen, what could it be?
Have you checked the battery on the sensors? It could be that you have a bad reader unit or the reader unit is not getting enough electrical power. You can try by connecting to USB instead of solar. Remember - these are cheap electronics that aren't really super high quality, so you may just have a bad unit.
Great Explanation Sir. Love it ! I have aftermarket internal sensors. The lighter plug in monitor beeps continuously and only one wheel reads which is also incorrect . Can this be repaired? Or should I just put in a new external one. Thanking you in advance
But when I go to menu 6, my device behave little differently. When I press menu it starts blinking the code below with respect to the tire number...and it doesn't stop blinking...I can switch to next tire by right key...it can go to rest of tires...the code.below each tire keep blinking...it doesn't stop...or pair the way you have shown on screen...
Hello, thanks for the great video. Is there a way to set the low pressure alarm below 17 psi. I wanted to use this on a vehicle with tire pressures around 12-15 psi so the alarm constantly goes off.
Thanks for the excellent video..I have the same uniy for 2 years and has been working perfect until recently when the auto sleep function doesn't work. So the unit will run out of battery really fast. Now I have to continuously charge the unit in order to use the unit . Is there a way to enable the auto sleep mode back?
@@roadrangermy4354 Im not sure what I did, but the auto sleep function is back. I leave it on the dash for solar charging and it never needs charging by USB anymore.
Thanks a lot for this valuable explanation all over the whole internet I was looking for. Now I would like to add a query which might help others too and it is a bit tricky and exceptional requirements. My scenario is, I've used external TPMS sensors previously and after a year, the main machine was useless so I bought a new TPMS with internal option. Now anyhow one of those four internal sensor got battery discharged which I came to know after disassemble the sensor. Now at this moment I have those old external sensors fine but the old TPMS machine was faulty, in this case "Can I synchronize any of my external tire sensor with the Internal TPMS machine anyhow which can help me to sustain few more days with a complete TPMS setup ?" If so, please guide how. It will be really helpful and thanks in advance.
You might be able to use the internal sensor's reader machine with the external sensors because I think that all these are manufactured by the same company in China, but I can't tell you for sure whether or not it will work. Give it a shot and see if it works.
Well done sir. But in my case i did everything right but after I put Battery into sensors and cover its cap then trying to fit in the valve but nothing happens at all. No pairing . What should I do?
Yeah same here. I lost my FL sensor so I bought a replacement online but when I tried the steps, it did not work. Checked the insides of the sensor but there is no number "0" indicated like shown in the video. I think the reader unit is not communicating with the new replacement sensor. 🥴🥴
Hello, the measurements of these devices are generally different. Even if all conditions are equal and tire pressures are the same, it shows different pressure values on the screen. Is there a calibration or +/- correction factor for this?
I personally turn off my in-car display unit if I park at home or if I park anywhere where there is no sunlight because keeping it on while there's no sunlight drains the battery fast.
What to do if one readout malfunctions? My unit is only two months old, all was fine but now but the RF unit is not communicating. The readout shows 0.0. I have tried to reset to factory settings, removed and reinstalled the sensor unit, removed and tested the battery (it shows 3,2 V) but nothing works. Seems like it's not the sender, I changed the senders from LF to RF and vice versa, but the RF readout remains on 0.0.
@@roadrangermy4354 I seem to be missing something, after factory reset and restart everything, now none of my sensors are being picked up by the reader. Everything seems OK, all lights come on, battery is fully charged but the readouts all remain on 0.0.
Hi I wonder if you could help me I brought the tire sensor When the sensor connects to the wheel the tyre pressure does not go up to 80 psi it only shows on my monitor 50 does this equipment does not go to ATPS I look forward to your comments
Oh that's a good question, I actually have no idea. Are you using it on a motorhome? I think these cheap sensors are made for cars and may not be able to handle the pressure of heavier vehicles. You may need to look for TPMS sensors made specifically for heavy vehicles.
Sadly there is no way to properly calibrate this toys. I went to the gas station, filled all with same pressure and then all the sensors are giving me different readings.
Yeah, the accuracy on these just isn't there. It's mostly useful to warn you of a puncture. Before I got this, I shredded a brand new tire going down the highway without realising that one of my rear tires developed a puncture en-route. I needed something that could beep at me if there was a puncture.
2 of my sensor showing same identical identifier? What is wrong here. Im talking about the option 6 in the menu . Tire 1 and 3 has the same identical identifier.
Wow that's weird - it could be that they packed an incompatible set into the box at the factory. Try returning it and getting a replacement if you can.
Instructions with my unit were very poor. Your tutorial is brilliant.
I know right!
Wow!!!!! I thought I wasted my money on this unit. Thanks to you. It’s not a waste of money. Your instructions are so clear. You talk at the right pace! Excellent work thank you so much.!!
FINALLY! Something that utterly clarifies & details all of the inherent mysteries of the External BT TPMS units! It took me far too long to find your video & learn how these sets work. Thank you for sharing!
Glad it helped!
¹❤❤
AT LAST !!!! Seems like the only person in the whole world that knows exactly what setting 6 means!! Have searched EVERYWHERE to no avail until I found your video..well done sir and a thorough "walk thhrough" of how to pair them..A BIG THUMBS UP to you😊😊😊😊😊
You just added more value to this rather cheap gadget. Now we don't have to throw this away if something goes wrong. Thank you very much.
It wasn't cooperating with me when I got it in from shipment so i did a hard reset from the manual but it only made it worse. It's only picking up the front left and rear right. Hopefully your video saved would save me from running it over. Thanks bro .awesome on point tutorial!
Best demo of this device I’ve seen. Thank you. Very informative.
Aside your magnificent explanation, your pronunciation and clear diction makes more valuable your video. Tanks.
By the way, I paired the sensors successfully
I was going to state the same thing! And his voice is pleasant too.
I was trying to figure out pairing when I came to this video, it didn't work but then I went to my manual and it said drive to 20km/h and they will all auto pair, indeed they did. Good video explaining rest of the features
How you did that? Can you explain the steps..
Good video. But what to do when the tyre temperature is wrong on all tyres ?
wow this is amazing ! even the people that sell this and the manufacturers can't explain how to pair The sensors
That was excellent and exactly what I was looking for. I have now successfully set up and re-paired my TPMS. Thank you
Thanks bro you really save my life i was totally exhausted trying to pair the 4 sensors .. it was giving me low battery symbol but after pairing by your way it finally worked .. thank you very much 🥰
10 mins of working out why three wouldn’t show anything, didnt even think to check the battery’s 🤣🤣 thanks man. helped heaps
This the the tut that i was looking for!!!! The rest of the vidoes on yt were just unnecessary crap!!! Many thanks mate..
Glad it helped 👍🏼
Excelente Explanation, with detailed info about the 7 menus
Tried your tutorial but still same problem tpms is not pairing with the sensor. Also tried to check the batteries with voltmeter no problem all
all are reading 3 volts. What seems to be the problem. Thanks
Great demo and explanation. Thank you!
too good... really trouble shooter... as I could not get the reading... I paired as per your advise and it suddenly it started showing off the reading.. so thank u so much for saving my money as I was about to throw it out of the window...
Happy that I could help!
Thank you for sharing your wonderful video I am watching from South Africa
Thank You .... awesome turorial mate... good job with the crystal clear explanation.
been suffering from acute headache for the past 2 hours upon opening the box and now the headache is now gone instantly.
keep up the good work. cant thank you enough.. u save me from another white hair 👍👍👍
Thank you so much for doing this video! I went and checked all my batteries and labels. They were correct. 🙂. The readings for me were off by like 1psi not too bad.
Brilliant instructions for pairing your Tyre Pressure Monitoring System. 👏 👍
Very well explained...thankyou.
Is there a way to 'delete' 2 of the Sensors. I am putting these on a Caravan and only want to see Sensors 0 and 1. I would rather have Sensors 2 & 3 completely blank rather than have them 'flashing'.
Thanks! More useful that the instruction manual 👍
THANK YOU DUDE...Your tutorial save my live, it works like a charm, after trow 3 of this ones on the trash, for dont know how to solve this problems!
Thank you, thank you alot!!!
You help me solve my pairing problem. Thank you very much
Thank you, it helped me a lot here in Brazil
Thanks so much for your tutorial. A great help. I do still have an issue with the display showing the wrong values. Especially the C,* temp. They vary sitting still from 7C to 27C . Its like it's stuck. Could the sensors be stuck,?
He doesn't get to the title topic until the 9 minute mark. You're welcome.
lol 😂
It worked.. thanks a lot. Mine was blank for weeks now fixed thank brother ❤❤❤❤
Thanks this is a good video. However I had already installed the adaptors onto the tyre stems. Now they seem to be stuck... Also I can only pair two of the tyres I kind of wish I hadn't bothered if it was going to be this much trouble.
You are amazing man, help me more than instruction menu of the product, I'm your fan
this was a great explanation on how to use this. I am wondering if you can answer a question.. my unit instuctions says "pressure copes 14-87 PSI". I am wanting to use this for a small tent trailer single axle. (I don't find the range anywhere, however hoping this is possible..) I am about to purchase new tires but I have read that often max PSI for trailer tires is 85PSI (and I have seen at least one that was 90PSI). Does that mean that this unit will not go higher than 87PSI? Therefore it won't work for higher pressure rated tires? Also, when I try to program the low end of the PSI, the highest PSI I can put in is 35PSI which would seem not to help at all with the higher pressure tires. I don't know much at all about tires, but any help you could offer would be appreciated. Thank you for the excellent tutorial!
thanks for sharing this! i’ve been struggling with the pairing
Nice explanation. Many thanks.
Per the manual you go to menu item 7, then press menu 2 times and drive car to for 5-15 mins. to pair the sensors
Very very nice tanks a lot!!!!!
Your video is so helpful. Thanks alot. Can we calibrate the sensors? One of my seniors read 2 psi higher
No you can't calibrate the sensor unfortunately
Thanks for the video. In my case I have the small cigarette lighter reader plus 4 sensors.
One of them needed to be replaced and I had a spare but only showing flashing 00
Great.. solved my problem. Thanks a lot
Excellent video!
Hi, first off, thank you for making this instructional video. One of my sensors unfortunately suffered from water corrosion and I subsequently purchased a replacement unit. However , after following the steps you showed to pair the sensor it was to no avail. Suspecting that perhaps the battery was faulty I even switch to one of the existing batteries which are in working order but still was not able to pair it. Is there anything else that I can do ? Instead of scanning for it can we manually set the number ?
Thanks. Very clear instructions.
Love the video, as we have installed this on my caravan the signal is too far from the dash to the sensors do you know if I can get some sort of signal booster.. thanks again for the great video
Aha mate, these cheap ones don't come with a booster or a repeater. You might want to consider getting one from TyrePal (www.tyrepal.co.uk), it's more expensive but they make ones that are specific for for caravans.
@@roadrangermy4354 thanks I will try them
Thanks for the clear explanation
Thank you very much you have saved me a lot of time with this video 👌
Very helpful video
Thank you. Good explanation!
what is the trouble shooting for 3 sensors showing 0 psi and one showing the actual psi? are the batteries going low?
Hi, mine still blinks and does not pair (all four sensors), I think I will get new batteries for each sensor and try again
Great information, Thank you!
Thank u, finally I understand all those buttons r made for. Gbu
What do you think is the matter when the RR pressure on the reader just isn't showing anymore? This is just after about 2 weeks of normal display. What should I do?
Very helpful sir I thought i wasted my money bcoz d one sensor doesnt respond always zero and unaccurate..same prduct on ur vdeo.the solution is just a matter of pairing all d.sensors.
Hi
I have MG ZS 1.3 turbo , now I have facing the problem for TPMS fault . How to reset this fault . In steering wheel which button for Reset ?
Can u guide me to sort it out .
Thank you for the wonderful video Sir. 👍
How i do the relearn in the internal version? i have to deflate de tires? Thanks!
Very helpfull , explain clearly & the problem solved👍 awesome
Mine shows wrong pressure. It shows higher pressure than what actually is. Any idea how to fix it?
As far as I know, you cannot calibrate these sensors and they're not really very accurate. They work best just to sort of tell you "roughly" what the pressure is. I mainly use mine so that I know if I have a sudden puncture while driving and for actual pressure measurement I use a pen-type pressure meter each time I pump up the tires.
Thanks so much. Great video and explanation 😊
Hi I never explain myself right can you tell me what is the maximum bar or psi does his equipment go because on my motor own it will not take it up to 80 psi thank you for your time
Thanks for the video Bro! Mine only couple months old but since day 1 the FR always shows 6 psi more than the rest i took them off today and factory reset it, not the sensor ID are all showing 00.00 and wont pair. Any idea? Pretty sure it's not the battery as it's fairly new.
I have the same brand but mine cannot be reset. It can't go thru those 7 menus. Is there any other way to reset it?
I have the same sensor but on a motor cycle so only 2 sensors and a small main display....the front sensor will not connect with the main unit.....the battery reads 3v on my battery tester.....any ideas guys.
Good evening, the video is very good. Thank you for giving us your knowledge. a query, perform all the steps but the sensors do not send a signal to the screen, what could it be?
Have you checked the battery on the sensors? It could be that you have a bad reader unit or the reader unit is not getting enough electrical power. You can try by connecting to USB instead of solar. Remember - these are cheap electronics that aren't really super high quality, so you may just have a bad unit.
@@roadrangermy4354 Good night I changed the batteries and everything is ok, thank you very much for the response, greetings from Peru
Very informative, thanks 👍
Great Explanation Sir. Love it !
I have aftermarket internal sensors. The lighter plug in monitor beeps continuously and only one wheel reads which is also incorrect .
Can this be repaired? Or should I just put in a new external one.
Thanking you in advance
Sounds like you might have 1 bad sensor, personally I would replace it with an external type unit since it's easier to take out and check etc.
Very nice video, helped me a lot, just one question, does the device charges even when is off?
The in-car reader unit does
I’ve follow ur steps and did factory reset but after that not able to pair … it doesn’t pair even after removing and installing the batteries
But when I go to menu 6, my device behave little differently. When I press menu it starts blinking the code below with respect to the tire number...and it doesn't stop blinking...I can switch to next tire by right key...it can go to rest of tires...the code.below each tire keep blinking...it doesn't stop...or pair the way you have shown on screen...
Thanks for the tutorial 👍🏻
Hello, thanks for the great video. Is there a way to set the low pressure alarm below 17 psi. I wanted to use this on a vehicle with tire pressures around 12-15 psi so the alarm constantly goes off.
I'm not sure if this is possible, the lowest number it shows is probably the lowest it goes to
Thanks for sharing sir... finally works..
Available in Ghana?? Please thanks for your kindness
Hi sir, why my RL the number still not chnage eventhough i alredy fill in with air
Thank you for this video
Thank you, that made it much easier 😉
What is the way to add a new sensor in the event that one of the sensors malfunctions, please. We are your followers from Jordan
Muchas gracias, logré vincular nuevamente los sensores de mi moto. Gracias mil.
Is it same method for cigarette lighter model?
Thanks for the excellent video..I have the same uniy for 2 years and has been working perfect until recently when the auto sleep function doesn't work. So the unit will run out of battery really fast. Now I have to continuously charge the unit in order to use the unit . Is there a way to enable the auto sleep mode back?
I didn't know that it had an auto-sleep function, mine runs out of battery too so I usually switch it off when I'm parked
@@roadrangermy4354 Im not sure what I did, but the auto sleep function is back. I leave it on the dash for solar charging and it never needs charging by USB anymore.
Thank you, Just saved my marriage 😂
lol!
Thanks a lot for this valuable explanation all over the whole internet I was looking for.
Now I would like to add a query which might help others too and it is a bit tricky and exceptional requirements.
My scenario is, I've used external TPMS sensors previously and after a year, the main machine was useless so I bought a new TPMS with internal option. Now anyhow one of those four internal sensor got battery discharged which I came to know after disassemble the sensor.
Now at this moment I have those old external sensors fine but the old TPMS machine was faulty, in this case "Can I synchronize any of my external tire sensor with the Internal TPMS machine anyhow which can help me to sustain few more days with a complete TPMS setup ?" If so, please guide how.
It will be really helpful and thanks in advance.
You might be able to use the internal sensor's reader machine with the external sensors because I think that all these are manufactured by the same company in China, but I can't tell you for sure whether or not it will work. Give it a shot and see if it works.
I have tried to do it and it works. Just what I did is, at first reset the device as DEFAULT as your advice but that option I found in menu serial 6.
Well done sir. But in my case i did everything right but after I put Battery into sensors and cover its cap then trying to fit in the valve but nothing happens at all. No pairing . What should I do?
Yeah same here. I lost my FL sensor so I bought a replacement online but when I tried the steps, it did not work. Checked the insides of the sensor but there is no number "0" indicated like shown in the video. I think the reader unit is not communicating with the new replacement sensor. 🥴🥴
@@samdelacruzjr. You changed to a replacement but in my case. I am trying to connect their own sensors. It is not working . I don't know what to do.
Hello, the measurements of these devices are generally different. Even if all conditions are equal and tire pressures are the same, it shows different pressure values on the screen. Is there a calibration or +/- correction factor for this?
No not really, these low cost sensors aren't great for pressure accuracy.
This video is super helpful, tqvm! The manual provided sucks!
Glad I found your video.. detailed explanation 👌
hi.. just bought the external sensor... and later on bought the internal sensors only . is it compatible with the unit?..
Great video! Does this device switch on automatically while driving or need to switch it on manually everytime?
I personally turn off my in-car display unit if I park at home or if I park anywhere where there is no sunlight because keeping it on while there's no sunlight drains the battery fast.
Muito obrigado!
Apenas o seu vídeo forneceu as informações que eu precisava!!
How to get back to reading sensor from the setting menu?
What to do if one readout malfunctions? My unit is only two months old, all was fine but now but the RF unit is not communicating. The readout shows 0.0. I have tried to reset to factory settings, removed and reinstalled the sensor unit, removed and tested the battery (it shows 3,2 V) but nothing works. Seems like it's not the sender, I changed the senders from LF to RF and vice versa, but the RF readout remains on 0.0.
These units are very cheaply built and I have not found anyone selling spare sensors. The only option appears to be to buy another set.
@@roadrangermy4354 I seem to be missing something, after factory reset and restart everything, now none of my sensors are being picked up by the reader. Everything seems OK, all lights come on, battery is fully charged but the readouts all remain on 0.0.
Hi I wonder if you could help me I brought the tire sensor When the sensor connects to the wheel the tyre pressure does not go up to 80 psi it only shows on my monitor 50 does this equipment does not go to ATPS I look forward to your comments
Oh that's a good question, I actually have no idea. Are you using it on a motorhome? I think these cheap sensors are made for cars and may not be able to handle the pressure of heavier vehicles. You may need to look for TPMS sensors made specifically for heavy vehicles.
Hi. I lost a sensor, and got a replacement which i bought online. Is there a way to sync/pair the replacement sensor to the host?
I have the same problem now, did you manage to pair the new sensor?
Be blessed man !!!
Very helpful ❤ i reset my Tpms😊
Sadly there is no way to properly calibrate this toys. I went to the gas station, filled all with same pressure and then all the sensors are giving me different readings.
Yeah, the accuracy on these just isn't there. It's mostly useful to warn you of a puncture. Before I got this, I shredded a brand new tire going down the highway without realising that one of my rear tires developed a puncture en-route. I needed something that could beep at me if there was a puncture.
Nope. That does not pair sensor. Sensor id keeps flashing, does not change and then returns to display.
same issue. how did you pair it?
Same issue
2 of my sensor showing same identical identifier? What is wrong here. Im talking about the option 6 in the menu . Tire 1 and 3 has the same identical identifier.
Wow that's weird - it could be that they packed an incompatible set into the box at the factory. Try returning it and getting a replacement if you can.