🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. You can help support me by Buying me a Coffee ☕ bit.ly/3xuQ3zb or by becoming a Member to unlock a host of benefits - thanks so much 🙏.
Thanks Charlie. Easy fix. Took 10 minutes. No need for a dedicated 6.5mm spanner. Just use a small adjustable spanner or you can just as easily hold the bolt with your fingers whilst tightening the screw. Saved me spending £200 on a new Dualit Vario 4 slice. New centre element £11.49 from espares did the trick.
Thanks mate. Handy to watch. Weird to see comments on here like “you saved me buying a new toaster”…! This is exactly WHY I bought a Dualit 4-slice Vario some 15 years ago…because I am sick of disposable landfill-creating crap. Dualit are to be thoroughly commended. 🏆
Just realised my Dualit isn’t working and this was the first result I found on Google… long time fan of the channel it shouldn’t surprise me you already had it covered you fucking legend sir.
Very helpful video, replaced an end and centre elements with no bother at all, much cheaper than buying a new toaster. I didn't have a 6.5 mm spanner but found a 1/4" AF and a 4BA spanner fitted just fine. Many thanks!
I posted a comment here 2 years ago. Here I am today thanking you. Had to replace middle element too. Am glad I had all the tools ready because the nuts were tightly wound in. Also did a lot of cleaning. Besides bread crumbs, there were cob webs inside (mostly in the timer compartment) even though we toast everyday.
Thanks Ash - sorry if I missed your original comment. Great work on the repair. It's so satisfying fixing it isn't it, and cleaning it out is almost as satisfying, as I found here ua-cam.com/video/udC35QEvzzY/v-deo.html👍
@@CharlieDIYte Oh no don't worry, you did respond to it. When I opened this video on Sunday to refresh my memory, UA-cam displayed my comment and your reply. 👌
Hi Charlie, Just a quick one to say thanks for a really useful video. I’ve now successfully replaced both the end and central elements on our toaster - saving well over £100 - trying to be more “make do and mend” rather than throw away and buy another one type. I’m completely impractical but managed to follow the instructions easily. Nice one mate.
Dear Charlie, it’s twice now that you have been my guide whilst I fixed an element on my dualit toaster! Many many thanks, and also managed to enjoy your backing track this time around, best wishes, Anne
Thanks for the video. This helped a lot. For anyone who needs the spanner, if you order the element direct from dualit and add the spanner to your basket, you will discover that they aren't charging for it (at least as of time of writing). Yes the job is a bit fiddly but not too difficult and certainly worth the effort vs the cost of a new toaster and the waste.
Great to see its possible to repair this toaster yourself. Dualit recommend you send the toaster for a service, but there's no need if your a bit handy. Thanks for the clear video.
Ray Hill Exactly. Only thing I'd add is that if you're replacing two of the elements you may as well replace all 4, as I've now got to replace the other 2!
+Charlie DIYte one more point Ray - see Bill Taylor's comment below about the end elements being more tricky to access. I'll be posting another video soon, when I replace the end elements.
Really helpful video - clear and easy to follow. Many thanks. Only issue is the new central element is much more effective than the old side elements, so may be converting those too in the next few months. I love the older style products that can actually be repaired.
Nice one Charlie, fixed my folks toaster and saved some unnecessary landfill. This nicely engineeeed, UK manufactured device is working like a dream again...cheers!
Thanks Charlie, Heard nothing but good things about this toaster. I hate the idea of buying crap so I don't mind spending the extra cash for quality. The fact that I can fix one of these beauties myself and the ease by which you demonstrate has convinced me to purchase. Thanks- good camera work on the vid. Also like the fact that these toasters are made in the UK, Charles Abbotsford, Canada
Charles Clifton Thanks Charles - great to hear your thoughts! Yep, we got this as a wedding present back in 2003 and it's still going strong. In a world where everything is designed to be chucked after a few years isn't it great to find a product that's designed to last!
Thanks, great video. Just changed an end element on a 2 slice toaster the same as the one you used. Quick tip, the screws for the end element are hard to reach but once you've moved the holding plate (2.33 mins) out of the way you can lift up both the centre and end element together giving you access to the screws. Thanks again. Dave.
Cheers Charlie - really helpful video. Who the hell has a 6.5mm spanner though!! Almost like dualit deliberately made it awkward for the home diy’er!?……had to make do with pliers which really grates my OCD!..
I remember hearing the song Englishman In New York by Sting and all this time I just assumed everyone in the UK made toast only on one side. Stupid me. After watching I have to say that is one hell of a well designed toaster and looks like its built to last forever.
This was very helpful didn't think I would be able to fix it myself .. Felt quite a novice and female to do this but your step by step guide with close ups was brilliant...had to pause a few times to catch up..but miracles..it works! Also found the elements I replaced smelt a bit for a few seconds..I suppose s the plastic coating burns off? Anyway I'm a convert now and will go into my next DIY project with more confidence after doing this. Many thanks.
Terry King Brilliant Terry - well done you, and thanks so much for taking the time to tell me how you got on. It's so empowering, isn't it, when you tackle a DIY project you didn't for a minute think you could do, and then succeed. So pleased for you!
Wish I'd watched this before I attempted replacing all the elements at once for someone who'd bought the whole set of elements. I took them all out and constructed it as a whole to give me room to use the tools, and it was fiddly to get it back in. Then realised that the end element is different for obvious reasons and I've got to check they're in the right order or move them round. I was confused by the apparently plastic layered coating that was on the old elements as well, so must be kept on. What a strange thing to see on the surface of the heating element. Looking forward to finishing it off now I've see this video.
Check out this update ua-cam.com/video/TfEhtrrOd7Q/v-deo.html which is more applicable to your situation as I was doing the same thing as you, and like you, took them all out 👍🏻
Really easy to follow - had to improvise the spanner as I only have 6 and 7mm. Have ordered one from ebay for next time. Thanks - feels good to repair something myself!
Great work Susan on both fronts. Yes you feel a bit epic breathing new life into gadgets like this, don't you. If you order direct through Dualit they will send you a spanner, too.
Guess what Charlie ? I am doing this for the third time in the last 12 months (my toaster is a 2+1 combi) which has 2 centre and 2 end elements. Each time I have replaced one defective element element - my lesson learned if an element fails change the bloody lot. My toaster is 22 years old and gets a lot (I mean a lot) of use as toasted sandwiches are a bit of a fave. Regarding the end elements - much easier if (1) remove centre element(s) first and when reinstalling put screw heads facing inwards. The nuts are actually 4 BA and I have a small 4BA spanner which I masking tape to the underneath of the crumb tray.
Ha! D'you know what Norman, I'm in exactly the same position. I've got to replace the other two elements and am kicking myself for not doing all of them at the same time 🙄
Guess what guys my 4 slice dualit has a faulty middle section and we're only using the end ones but we still have to flip over the bread for both sides to be done. I think I should replace all the elements judging by the comments here, what do you think? Great video by the way this will save me buying a new toaster
I replaced only the middle element 6-7 years ago and first now had to replace the end element too. But I had to by a non dualit spare part that came without manual. So thanks a lot for the video!
This process is easier if you put the toaster on its (flat) side rather than upside down, because then you're not fighting gravity. A pair of needle-nosed pliers and regular pliers works as an acceptable substitute for a 6mm spanner if you don't have one.
Hey Charlie, after struggling with my four slot toaster for a little while I reached for UA-cam and found this video. However, I also discovered that, rather than having to disconnect all the brass connectors between each of the elements, you can actually slide all the elements out together if you disconnect the wires first. This makes accessing the nuts and screws miles easier! Thought this might be useful for others found in the same situation 👍
@@CharlieDIYte After a lot of extra time wasted (and swearing) let me slightly qualify my previous comment - Slide the elements out about half way, so you can easily access the screws and nuts, but don’t (like I did) pull them all the way out unless you have to. As I discovered they can be a nightmare to realign all the elements back in the slots afterwards, especially if you have 5 like in my 4 slice toaster. Even if you’re changing all the elements, I’d just change one at a time with the rest slid half way up for access 👍
Very relieved that yours lasted over a decade. I bought the 4-slot model thinking that high price must be a sign of quality. The thing looks like a military grade toaster. 😂
Oh yes. I do now need to replace the timer which sticks a bit and the other two elements are wearing out but the point is, like with a Henry vacuum you can just swap out the old parts with new ones, which in an age of throw away appliances is rather marvelous 🙂 Might end up like Trigger and his broom in Only Fools and Horses though 🤣
@@CharlieDIYte That timer thing was first item which worried me. "How many turns before it breaks" was my thought. I think I will order its spare parts on eBay (while stocks last). 😁
Hi who makes the 6.5mm spanner? I bought one advertised for dualit but its tiny and tricky to use. Can't get the retaining nuts loose. any advice much appreciated
Paul Chappell You're very welcome, Paul - thanks for taking the time to comment. Funnily enough I'm going to have to do the other two soon - should have done them all at once!
Thank you, I will repair mine today. One think though. I clean the rusty type marks on the top of my toaster with a small amount of car cleaner like T Cut and rub it off with fine wire wool. It comes up beautifully.
+Zed Man Such a shame isn't it! Time was when each town had a repair shop that you took your faulty appliances to. Now you just throw them in a big container at the local tip, when they go wrong. Let's hope Dualit continue with this strategy and don't have to go down the cheap parts, throw away route to stay competitive.
Hi, thanks for the video. I want to know if the support rods on the sides and the base are made of aluminum or stainless steel. I mean, if the aluminum comes into contact with the bread at any point? (I am not referring to the external clamp-type device to place the bread and then put it inside). Is the aluminum in contact with the bread? Thanks.
Thanks a lot!! I also bought my dualit a long time ago, 2006. A friend from London brought all three elements and timer here in Brazil where I live. Just worried about a sort of burnt plastic
Just about to do the same with my 2 slice Dualit which I have had for many years. I have had to replace the end elements before but not the centre one. Worth noting that Dualit toasters can be polished back to shining almost new with Solvol Autosol chrome polish for cars. Easy and quick to do too. Now Charlie I want you to go off and cut and clean your finger nails please. Your wife will love you for it.
Make sure power is isolated & plug removed from the wall. Afterwards carry out a continuity test after you've done the work & check all the nuts & screws on the element are secure because if not they can arc causing sparking to happen & shorten the life expectancy of the part being replaced. A pair of long nosed pliers is helpful too but he didn't mention that . A ring spanner is better than an open ended if you have one. If you need to buy one double check its the right size as some toasters may come with a different size.
Is there a plastic film over the element that needs to be removed? Once I replaced the element there was a plastic smell when I first used the toaster again?
hi Charlie just repaired a dualit toaster using your utube...thanks it was helpful guide. i have a question though. on the new elements ( 2 outside ones on a 2 slice toaster) there was a felt tip green dot on one side. i put these facing inwards thinking it indicated how they should be placed. they are new style elements with fire proof plastic as oppose to mica. the toaster cooks ok but the outside elements do not get as hot as before. any thoughts. thanks Ben
That was well explained, Charlie. Thank you. I need to replace two elements in my 4 slice Dualit toaster which I've been using since 1996.............!!
Thank you very much for the educational tutorial. I succeeded in replacing a centre and end element, with a bit of trial and error - didn't realize the green dot was there for a purpose - but my toaster works again :-D
What I want is to modify a spare toaster to toast on one side only! For toasting a breakfast muffin or bagel on one side only. Bagel toasters are as rare as hen's teeth in the UK and I've only found two listings, each of which costs a fortune. This spare toaster I have is a Russel Hobbs with two slots and I figure if I just pull the plug then snip the element wire on one of the slots, it would disable it and the remaining element would still work.
You're welcome. Here's the update video in case you have more elements or a timer switch that needs replacing ua-cam.com/video/TfEhtrrOd7Q/v-deo.html .
Hello Charlie, I got a Dualit Toster 15 year ago and one of the sides is not toasting... As I am in Brazil not sure how long a replacement element would take to arrive ... anyways tks for your video.. you try to buy the fault element or fix it... I just love too much this toaster to discharge it...
Hmm. Tricky. Maybe email Dualit UK and ask them if they ship overseas or whether there's a distributor in Brazil. And replace all 4 elements whilst you're at it.
Hi Charlie, I have a 2 by 1 toaster and replaced one of the central elements. It is the new type element which is slightly longer than the old type element. Everything went well except for the fact that it does not brown the toast as fast as the older elements. This necessitates turning the toast during toasting which is obviously undesirable. Other than replacing all my old elements with new ones is there another solution. William M.
Susan Landini Hi Susan - thanks for the comment! There seem to be plenty of companies that supply them, from a quick search on Google, like these people www.heritageparts.com/search?text=Dualit, and eBay also do them. So with any luck you'll find a suitable supplier. One tip - replace all elements side and centre at the same time as otherwise in 6 months time you'll need to replace the centre element anyway. Thanks for supporting my channel, and good luck with the repair!
Hi Dane: I found a supplier for the replacement elements, but had to call them back after the elements arrived and ask for the spanner! They verified they had one in stock and sent it to me ASAP. I don't know why they didn't just automatically send it with the elements. Here's that source: store.electra-craft.com/dualit-toaster-parts
Lovely video! A new similar madel will cost me 100 euros on Amazon. My toaster is thirteen years old. It was toasting in the kitchen when the whole house electrics tripped. Then I discovered it no longer worked so how do I know which element to replace? To post the toaster to Sussex from France and pay for the repair would equate to the price of a new one. If you could help in any way I would be grateful. It seems monstrous to throw it away. I must try phoning the factory, I am encouraged because you were successful dealing with them. We don't have fuses in French plugs by the way.
Hmm. I think maybe do what I did here and replace all elements and the timer switch. That way you know you've fixed all potential issues. The timer switch can be a real hazard if it sticks, so well worth replacing that. ua-cam.com/video/TfEhtrrOd7Q/v-deo.htmlsi=kTvbHrxYNvHDc6Ld
Hey Charlie great video but one problem I ran into was the replacement element had a plastic cover which I assumed was a protective cover for transport and I tried to remove it. Then I realised it was riveted on and I googled and found a post which says: "Please Note The Dualit ProHeat elements are covered in a protective heat proof film. Do not remove this film when inserting new elements as this will invalidate the warranty on your toaster." By then I had already ripped a few sections of it off. I have now installed it and so far it is working fine, but I'm guessing it won't last as long as it would have if I had left it alone. It wasn't obvious, because the old failed element I removed had nothing covering the wires. Either the original toaster element did not have it, or even though it is relatively heat-proof it has burned off over the years. Dougal
Hey Charlie. My whole 2 slot toaster doesn’t heat up at all now. The red light does come on though. Toaster only 4 weeks old and hardly used. Any ideas please?
Red light means you are getting power, then it's probably the timer! If you have a 4 slots, try switch in 4 selection if you haven't, maybe the 2 slot position has 2 bad elements, buy the other 2 work! If nether select works, all your elements could be bad or it's the timer! If you know how to use a voltmeter you could check to see if the wires to the element(s) are getting power. Don't forget to turn the timer on. (WARNING--would have to be plugged in and then there is a SHOCK HAZARD!!) if the elements are getting power then it's the elements, if not it's the timer! DO NOT TRY THIS IF YOU ARE NOT QUALIFIED!!
succesfukky fitted end element using only screwdriver , hand tightening all nuts. I am not sure if the end elements worm on both sides - there seem to be heat sinks on ends . first time |I tried it one way then the other. worked second time butbmaybe not properly fixed firt time . great viseo!
If you don't have a 6.5mm spanner, a 1/4 inch spanner will work. Also, just be aware that there are two nut sizes, thick and thin. Just make note what goes where.
Thanks Charlie... well done. Question: You made no reference whether your issue was the element or the wiring to it. Is there a definitive way to tell from looking at the element alone(assuming one doesn't have a volt meter to test the wiring with)?
You're welcome. No, I'm afraid I wasn't that technical. I simply looked at the toast, saw which side wasn't cooking properly and replaced that element. The wiring is pretty basic and unlikely to fail, so if you've had your toaster for a number of years, chances are it's the element that's gone.
I want to replace the centre element from my Smeg toaster. Do they use the same element? Smeg don't sell replacements and I'm hoping I can use a Duelit one.
I think it's highly unlikely, unfortunately. Best thing to do is take out the existing element and maybe call Dualit to see how the dimensions compare. Also take a look at Espares and see if they sell anything comparable 🤔
In the words of Columbo "just one more question", I can see where the element is damaged. One of the exposed metal wires is clearly severed. Am I right in thinking that a single break in the wire will stop the element from heating up, and is there any way to fix the break in the wire? I don't hold out much hope in finding a suitable replacement element in todays consume and dispose culture but dread the thought of throwing a good appliance away for the sake of one small (but fundamental) fault.
Is this after replacing the element? Yes, I think there was an initial smell. Just check you've wired it up properly and there isn't any other plastic touching the elements.
Good video but be aware that replacing the end element is not like replacing the centre element as you cannot access the screws easily. You can if you've got the kit ( a flat ratchet spanner with a 1/4" drive/ Phillips bit ) as fortunately I had. A normal Phillips won't do it as one Phillips screw is obstructed by the end panel. If you don't want to buy a 6.5 mm open ended spanner for one job ( hopefully never to be repeated !) a 1/4 AF should do it. BTW How many toasters will you buy and landfill before you buy a repairable ( spares aren't expensive) Dualit? Ecology not to mention economy begins at home!
Thanks Bill - a timely comment because the end element will need replacing soon so I'll bear this in mind and might even do another video - to differentiate between centre and end element repairs. It's a shame they couldn't have designed that better - and using a 6.5mm spanner isn't great either because they're not widely available - you as you say the 1/4 AF is worth a shot. Couldn't agree more - when I was growing up there was a local repair shop for all things electrical. Now as you say they just all go into landfill!
In 60 years of engineering and electrical repairs I’ve never seen a 6.5mm spanner. 6.35 mm, ¼”, of course. You’d need to find a very specialist supplier.
@@paulwomack5866 Yes, of course you can find something that might more or less fit (as I did), but that's not my point. After all, you could use an adjustable spanner. As far as I am aware there are no 6.5mm spanners, in other words spanners that are designed and manufactured to an official 6.5mm specification. However, I suspect these are in fact 4BA nuts, but Dualit are too embarrassed to admit it, wanting to sound modern.
@@ricktherecorder4416 To expand on my "4BA fits best of all"... Putting a micrometer on a couple of nuts, I got a consistent reading of 0.2475". Checking my multi-standard chart of spanner AF sizes, 1/4" AF is (of course) 0.250, but 4BA is 0.248" So I'm happy that 4BA is correct. :-) en.wikipedia.org/wiki/British_Association_screw_threads
You can tell that it's made in Britain by the fact that they are using 6 and a half millimetre effing nuts . . . why the EFF can't use either 6 OR 7 mm nuts is beyond me, they're hardly structural. Most, if not all, HANDYMAN metric spanner sets come in increments of 1mm, starting, usually, "around" 4-6mm. None that I've ever come across have had half millimetre increments. Unless, of course, 6.5mm is the nearest equivalent to some imperial measurement. Having just checked, of course it effing is. Quarter of an inch, which isn't 6.5mm it's 6.35mm and given that these nuts appear to be copper / brass they'll end up getting rounded off nicely with an incorrectly fitting spanner. At 62 years of age, I'd hoped that I'd've seen the back of imperial tools by now . . . but no FML
Glad you took the somewhat coarse observation in the spirit it was intended . . . not a pop at you more frustration aimed at Dualit. Guess who hasn't got a 1/4" spanner@@CharlieDIYte
Youmade no mention of the slots that the element slides into. You barely paid attention when sliding the element in. I'd check to see if your new element is properly retained in the slots if I were you
🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. You can help support me by Buying me a Coffee ☕ bit.ly/3xuQ3zb or by becoming a Member to unlock a host of benefits - thanks so much 🙏.
one of the best instruction videos I have seen, Am a 72 year old novice and now feel empowered! thanks you
Thanks Charlie. Easy fix. Took 10 minutes. No need for a dedicated 6.5mm spanner. Just use a small adjustable spanner or you can just as easily hold the bolt with your fingers whilst tightening the screw. Saved me spending £200 on a new Dualit Vario 4 slice. New centre element £11.49 from espares did the trick.
Thanks mate. Handy to watch. Weird to see comments on here like “you saved me buying a new toaster”…! This is exactly WHY I bought a Dualit 4-slice Vario some 15 years ago…because I am sick of disposable landfill-creating crap. Dualit are to be thoroughly commended. 🏆
Thanks Tim. You're right but we live in a throw away culture where even Dualit owners often don't realise they can be repaired. Love mine!!
Just realised my Dualit isn’t working and this was the first result I found on Google… long time fan of the channel it shouldn’t surprise me you already had it covered you fucking legend sir.
Thanks buddy 👊. There's also an updated one, here ua-cam.com/video/TfEhtrrOd7Q/v-deo.html
Very helpful video, replaced an end and centre elements with no bother at all, much cheaper than buying a new toaster. I didn't have a 6.5 mm spanner but found a 1/4" AF and a 4BA spanner fitted just fine. Many thanks!
BA sizes are common in electrical work - I suspect 4BA is "right" and 1/4 AF "happens to fit"
I posted a comment here 2 years ago. Here I am today thanking you. Had to replace middle element too. Am glad I had all the tools ready because the nuts were tightly wound in. Also did a lot of cleaning. Besides bread crumbs, there were cob webs inside (mostly in the timer compartment) even though we toast everyday.
Thanks Ash - sorry if I missed your original comment. Great work on the repair. It's so satisfying fixing it isn't it, and cleaning it out is almost as satisfying, as I found here ua-cam.com/video/udC35QEvzzY/v-deo.html👍
@@CharlieDIYte Oh no don't worry, you did respond to it.
When I opened this video on Sunday to refresh my memory, UA-cam displayed my comment and your reply. 👌
Hi Charlie,
Just a quick one to say thanks for a really useful video. I’ve now successfully replaced both the end and central elements on our toaster - saving well over £100 - trying to be more “make do and mend” rather than throw away and buy another one type. I’m completely impractical but managed to follow the instructions easily. Nice one mate.
One of clearest, simplest 'how-to' video I have ever seen. Excellent!
Thanks Ian, appreciate you taking the time to comment. There's an update to this here ua-cam.com/video/TfEhtrrOd7Q/v-deo.html
Dear Charlie, it’s twice now that you have been my guide whilst I fixed an element on my dualit toaster! Many many thanks, and also managed to enjoy your backing track this time around, best wishes, Anne
Very useful video. It shows the simple but brilliantly British engineered toaster. Lasts for generations
Thanks for the video. This helped a lot. For anyone who needs the spanner, if you order the element direct from dualit and add the spanner to your basket, you will discover that they aren't charging for it (at least as of time of writing). Yes the job is a bit fiddly but not too difficult and certainly worth the effort vs the cost of a new toaster and the waste.
Great to see its possible to repair this toaster yourself. Dualit recommend you send the toaster for a service, but there's no need if your a bit handy. Thanks for the clear video.
Ray Hill Exactly. Only thing I'd add is that if you're replacing two of the elements you may as well replace all 4, as I've now got to replace the other 2!
+Charlie DIYte one more point Ray - see Bill Taylor's comment below about the end elements being more tricky to access. I'll be posting another video soon, when I replace the end elements.
Very, very useful. Thanks a lot. Now my 20 years old toaster works like a new one.
I used this to replace our elements. Really helpful, the tip to remove and change all three and once was greet. Thanks!
Really helpful video - clear and easy to follow. Many thanks. Only issue is the new central element is much more effective than the old side elements, so may be converting those too in the next few months. I love the older style products that can actually be repaired.
I am just replacing some elements in my 4 slice Dualit toaster after 23 years of everyday use. Real quality. 😊
I've had mine for 22 years, love it end element needs replacing. Thanks for this.
It's great, isn't it 👌
Hey Charlie, I followed your excellent instructions and my toaster is working perfectly once again. Great tutorial, thank you!
Michael that's fantastic news. So satisfying, isn't it! Great work 👍
@@CharlieDIYte Yes, much better than buying yet another toaster, thank you very much!
Nice one Charlie, fixed my folks toaster and saved some unnecessary landfill. This nicely engineeeed, UK manufactured device is working like a dream again...cheers!
Yey! Great news - thanks for letting me know.
Thanks Charlie,
Heard nothing but good things about this toaster. I hate the idea of buying crap so I don't mind spending the extra cash for quality. The fact that I can fix one of these beauties myself and the ease by which you demonstrate has convinced me to purchase. Thanks-
good camera work on the vid. Also like the fact that these toasters are made in the UK,
Charles
Abbotsford, Canada
Charles Clifton Thanks Charles - great to hear your thoughts! Yep, we got this as a wedding present back in 2003 and it's still going strong. In a world where everything is designed to be chucked after a few years isn't it great to find a product that's designed to last!
Thanks, great video. Just changed an end element on a 2 slice toaster the same as the one you used. Quick tip, the screws for the end element are hard to reach but once you've moved the holding plate (2.33 mins) out of the way you can lift up both the centre and end element together giving you access to the screws. Thanks again. Dave.
Thanks Dave, that's a great tip and one which I'll use when I replace the other two elements soon.
Looks easy. My 3 elements arrived today. A job for the weekend
Cheers Charlie - really helpful video. Who the hell has a 6.5mm spanner though!! Almost like dualit deliberately made it awkward for the home diy’er!?……had to make do with pliers which really grates my OCD!..
I know what you mean. You can actually buy one from Dualit as discussed here ua-cam.com/video/TfEhtrrOd7Q/v-deo.html
I remember hearing the song Englishman In New York by Sting and all this time I just assumed everyone in the UK made toast only on one side. Stupid me. After watching I have to say that is one hell of a well designed toaster and looks like its built to last forever.
And you have to applaud them for making replaceable parts 👍🏻
This was very helpful didn't think I would be able to fix it myself .. Felt quite a novice and female to do this but your step by step guide with close ups was brilliant...had to pause a few times to catch up..but miracles..it works! Also found the elements I replaced smelt a bit for a few seconds..I suppose s the plastic coating burns off? Anyway I'm a convert now and will go into my next DIY project with more confidence after doing this. Many thanks.
Terry King Brilliant Terry - well done you, and thanks so much for taking the time to tell me how you got on. It's so empowering, isn't it, when you tackle a DIY project you didn't for a minute think you could do, and then succeed. So pleased for you!
Did it today following the vid. Bit fiddly, but easily doable. Thanks.
Great work Pat. 👍🏻
Wish I'd watched this before I attempted replacing all the elements at once for someone who'd bought the whole set of elements. I took them all out and constructed it as a whole to give me room to use the tools, and it was fiddly to get it back in. Then realised that the end element is different for obvious reasons and I've got to check they're in the right order or move them round. I was confused by the apparently plastic layered coating that was on the old elements as well, so must be kept on. What a strange thing to see on the surface of the heating element. Looking forward to finishing it off now I've see this video.
Check out this update ua-cam.com/video/TfEhtrrOd7Q/v-deo.html which is more applicable to your situation as I was doing the same thing as you, and like you, took them all out 👍🏻
Really easy to follow - had to improvise the spanner as I only have 6 and 7mm. Have ordered one from ebay for next time. Thanks - feels good to repair something myself!
Great work Susan on both fronts. Yes you feel a bit epic breathing new life into gadgets like this, don't you. If you order direct through Dualit they will send you a spanner, too.
Guess what Charlie ? I am doing this for the third time in the last 12 months (my toaster is a 2+1 combi) which has 2 centre and 2 end elements. Each time I have replaced one defective element element - my lesson learned if an element fails change the bloody lot. My toaster is 22 years old and gets a lot (I mean a lot) of use as toasted sandwiches are a bit of a fave. Regarding the end elements - much easier if (1) remove centre element(s) first and when reinstalling put screw heads facing inwards. The nuts are actually 4 BA and I have a small 4BA spanner which I masking tape to the underneath of the crumb tray.
Ha! D'you know what Norman, I'm in exactly the same position. I've got to replace the other two elements and am kicking myself for not doing all of them at the same time 🙄
Guess what guys my 4 slice dualit has a faulty middle section and we're only using the end ones but we still have to flip over the bread for both sides to be done. I think I should replace all the elements judging by the comments here, what do you think? Great video by the way this will save me buying a new toaster
I replaced only the middle element 6-7 years ago and first now had to replace the end element too. But I had to by a non dualit spare part that came without manual. So thanks a lot for the video!
This process is easier if you put the toaster on its (flat) side rather than upside down, because then you're not fighting gravity. A pair of needle-nosed pliers and regular pliers works as an acceptable substitute for a 6mm spanner if you don't have one.
Really helpful! I fixed my toaster. I am useless at DIY so really helped.
Russell Wareing Thanks for the feedback Russell. You've just proved you're not useless at DIY!
what are the things/grills on the side I am making an assignment on this help would be appreciated
What do you mean? Can you be a bit more specific?
Thanks Charlie another toaster repaired instead of scrapped at our house
Thanks Charlie ordering new parts to day 🔧🍞🤩
Hey Charlie, after struggling with my four slot toaster for a little while I reached for UA-cam and found this video. However, I also discovered that, rather than having to disconnect all the brass connectors between each of the elements, you can actually slide all the elements out together if you disconnect the wires first. This makes accessing the nuts and screws miles easier! Thought this might be useful for others found in the same situation 👍
Thanks Stephen. Yes that makes sense. 👊
@@CharlieDIYte After a lot of extra time wasted (and swearing) let me slightly qualify my previous comment - Slide the elements out about half way, so you can easily access the screws and nuts, but don’t (like I did) pull them all the way out unless you have to. As I discovered they can be a nightmare to realign all the elements back in the slots afterwards, especially if you have 5 like in my 4 slice toaster. Even if you’re changing all the elements, I’d just change one at a time with the rest slid half way up for access 👍
Great video thanks, suggest telling people to make sure it’s unplugged from the wall prior to fixing 😂
I think our toaster has got to the stage where it needs a new element or two, great video, thanks..
This vid is a little more comprehensive ua-cam.com/video/TfEhtrrOd7Q/v-deo.html 👊
@@CharlieDIYte thanks Charlie, now to order the parts..
Very relieved that yours lasted over a decade. I bought the 4-slot model thinking that high price must be a sign of quality. The thing looks like a military grade toaster. 😂
Oh yes. I do now need to replace the timer which sticks a bit and the other two elements are wearing out but the point is, like with a Henry vacuum you can just swap out the old parts with new ones, which in an age of throw away appliances is rather marvelous 🙂 Might end up like Trigger and his broom in Only Fools and Horses though 🤣
@@CharlieDIYte That timer thing was first item which worried me. "How many turns before it breaks" was my thought. I think I will order its spare parts on eBay (while stocks last). 😁
@@Ash_G It's pretty robust. Remember I've had mine since 2003 and it's still working. Just sticks a little from time to time.
Top notch vid, Charlie! Very helpful.
Thanks Ferg - much appreciated!
Hi who makes the 6.5mm spanner? I bought one advertised for dualit but its tiny and tricky to use. Can't get the retaining nuts loose. any advice much appreciated
Thanks, Charlie. Very useful and enjoyable to watch too.
how to figure out between the middle and end element?How to know which side gets warm of the end element?
Thank you Charlie boy for giving me the confidence to sort this myself rather than sending it to Dualit for repair. :)
Paul Chappell You're very welcome, Paul - thanks for taking the time to comment. Funnily enough I'm going to have to do the other two soon - should have done them all at once!
Thanks for saving my Dualit toaster.
Good to hear it, George. Well done getting it fixed👍
Always enjoy your videos. Thanks again.
You're welcome. Thanks for the comment 👊
Thanks, Charlie. Very useful tutorial.
You're welcome. Thanks for the comment!
Thank you, I will repair mine today. One think though. I clean the rusty type marks on the top of my toaster with a small amount of car cleaner like T Cut and rub it off with fine wire wool. It comes up beautifully.
Thanks Paul. That's similar to what I did here ua-cam.com/video/TfEhtrrOd7Q/v-deo.html 👍
@@CharlieDIYte LOL yes, I didnt see that one, I got the trick after watching a furniture refurb company :-)
Bit easier than a velux window, Charlie! Nice tip about being able to get Dualit spares. This is a good reason to stick with Dualit.👍
Thanks. Glad you found it useful. Yes, a lot easier than the Velux, or the log store I'm building right now!
Excellent, easy to follow video, thx a lot!
You're welcome.
Nice you can repair these unfortunately most of the other shop brands are throw away as you can't buy parts for them! Nice video.
Thanks Zed Man!
+Zed Man Such a shame isn't it! Time was when each town had a repair shop that you took your faulty appliances to. Now you just throw them in a big container at the local tip, when they go wrong.
Let's hope Dualit continue with this strategy and don't have to go down the cheap parts, throw away route to stay competitive.
What are these Dualit newgen toasters like for tall bread? Warburtons, how is bread etc?
Hi, thanks for the video. I want to know if the support rods on the sides and the base are made of aluminum or stainless steel. I mean, if the aluminum comes into contact with the bread at any point? (I am not referring to the external clamp-type device to place the bread and then put it inside).
Is the aluminum in contact with the bread? Thanks.
Thanks a lot!! I also bought my dualit a long time ago, 2006. A friend from London brought all three elements and timer here in Brazil where I live. Just worried about a sort of burnt plastic
I don't know is it Brought or Bought ? ( did your friend mail them )
You advise is always spot on. Thanks!
Thanks!
Good stuff - Thanks Charlie
Just about to do the same with my 2 slice Dualit which I have had for many years. I have had to replace the end elements before but not the centre one. Worth noting that Dualit toasters can be polished back to shining almost new with Solvol Autosol chrome polish for cars. Easy and quick to do too. Now Charlie I want you to go off and cut and clean your finger nails please. Your wife will love you for it.
Thanks for that. Great tip, I'll keep a note of that. 👍🏻
Thanks Charlie, great vid! I now feel confident enough to order the parts and save ££s
CHEAPER AND SAFER TO BUY NEW ONE , THESE ARE CHUCK AWAY ITEMS NOW
Make sure power is isolated & plug removed from the wall. Afterwards carry out a continuity test after you've done the work & check all the nuts & screws on the element are secure because if not they can arc causing sparking to happen & shorten the life expectancy of the part being replaced. A pair of long nosed pliers is helpful too but he didn't mention that . A ring spanner is better than an open ended if you have one.
If you need to buy one double check its the right size as some toasters may come with a different size.
Is there a plastic film over the element that needs to be removed? Once I replaced the element there was a plastic smell when I first used the toaster again?
No Carolyn, there is some sort of film but it's part of the element. Is it working fine now?
hi Charlie
just repaired a dualit toaster using your utube...thanks it was helpful guide.
i have a question though.
on the new elements ( 2 outside ones on a 2 slice toaster) there was a felt tip green dot on one side. i put these facing inwards thinking it indicated how they should be placed. they are new style elements with fire proof plastic as oppose to mica. the toaster cooks ok but the outside elements do not get as hot as before.
any thoughts.
thanks
Ben
That was well explained, Charlie. Thank you. I need to replace two elements in my 4 slice Dualit toaster which I've been using since 1996.............!!
Thank you very much for the educational tutorial. I succeeded in replacing a centre and end element, with a bit of trial and error - didn't realize the green dot was there for a purpose - but my toaster works again :-D
Ah, that's great news Gérard. Many thanks for letting me know 👍
What I want is to modify a spare toaster to toast on one side only! For toasting a breakfast muffin or bagel on one side only. Bagel toasters are as rare as hen's teeth in the UK and I've only found two listings, each of which costs a fortune. This spare toaster I have is a Russel Hobbs with two slots and I figure if I just pull the plug then snip the element wire on one of the slots, it would disable it and the remaining element would still work.
Hello, I would like to know if the older dualit elements are the same in the two slot toaster as they are in the 4 slot duality?
They probably are. Might be worth contacting Dualit to check 👍
👏thank you...very helpful
You're welcome. Here's the update video in case you have more elements or a timer switch that needs replacing ua-cam.com/video/TfEhtrrOd7Q/v-deo.html .
Hello Charlie, I got a Dualit Toster 15 year ago and one of the sides is not toasting... As I am in Brazil not sure how long a replacement element would take to arrive ... anyways tks for your video.. you try to buy the fault element or fix it... I just love too much this toaster to discharge it...
Hmm. Tricky. Maybe email Dualit UK and ask them if they ship overseas or whether there's a distributor in Brazil. And replace all 4 elements whilst you're at it.
Hi Charlie, I have a 2 by 1 toaster and replaced one of the central elements. It is the new type element which is slightly longer than the old type element. Everything went well except for the fact that it does not brown the toast as fast as the older elements. This necessitates turning the toast during toasting which is obviously undesirable. Other than replacing all my old elements with new ones is there another solution.
William M.
Cheers! Saved me a couple of quid!
Loved the video! I live in the USA- where do I purchase the elements. I think I also need side elements as my toaster no longer a browns at all.
Susan Landini Hi Susan - thanks for the comment! There seem to be plenty of companies that supply them, from a quick search on Google, like these people www.heritageparts.com/search?text=Dualit, and eBay also do them. So with any luck you'll find a suitable supplier. One tip - replace all elements side and centre at the same time as otherwise in 6 months time you'll need to replace the centre element anyway. Thanks for supporting my channel, and good luck with the repair!
very helpful - thanks !
Great video. Thank you
Suggest you do a similar video for the 3 or 4 slot model.
6.5 mm spanner!! Getting the element is relatively easy
Hi Dane: I found a supplier for the replacement elements, but had to call them back after the elements arrived and ask for the spanner! They verified they had one in stock and sent it to me ASAP. I don't know why they didn't just automatically send it with the elements. Here's that source: store.electra-craft.com/dualit-toaster-parts
Great stuff!
+David Billyard Thanks David. Much appreciated!
Lovely video! A new similar madel will cost me 100 euros on Amazon. My toaster is thirteen years old. It was toasting in the kitchen when the whole house electrics tripped. Then I discovered it no longer worked so how do I know which element to replace? To post the toaster to Sussex from France and pay for the repair would equate to the price of a new one. If you could help in any way I would be grateful. It seems monstrous to throw it away. I must try phoning the factory, I am encouraged because you were successful dealing with them. We don't have fuses in French plugs by the way.
Hmm. I think maybe do what I did here and replace all elements and the timer switch. That way you know you've fixed all potential issues. The timer switch can be a real hazard if it sticks, so well worth replacing that. ua-cam.com/video/TfEhtrrOd7Q/v-deo.htmlsi=kTvbHrxYNvHDc6Ld
Hey Charlie great video but one problem I ran into was the replacement element had a plastic cover which I assumed was a protective cover for transport and I tried to remove it. Then I realised it was riveted on and I googled and found a post which says:
"Please Note
The Dualit ProHeat elements are covered in a protective heat proof film. Do not remove this film when inserting new elements as this will invalidate the warranty on your toaster."
By then I had already ripped a few sections of it off. I have now installed it and so far it is working fine, but I'm guessing it won't last as long as it would have if I had left it alone.
It wasn't obvious, because the old failed element I removed had nothing covering the wires. Either the original toaster element did not have it, or even though it is relatively heat-proof it has burned off over the years.
Dougal
Sorry to hear that. Yes I know what you mean. I guess the plastic is to protect the element from crumbs/ grease. Keep an eye on it. 👍
Hey Charlie. My whole 2 slot toaster doesn’t heat up at all now. The red light does come on though. Toaster only 4 weeks old and hardly used. Any ideas please?
Red light means you are getting power, then it's probably the timer! If you have a 4 slots, try switch in 4 selection if you haven't, maybe the 2 slot position has 2 bad elements, buy the other 2 work! If nether select works, all your elements could be bad or it's the timer! If you know how to use a voltmeter you could check to see if the wires to the element(s) are getting power. Don't forget to turn the timer on. (WARNING--would have to be plugged in and then there is a SHOCK HAZARD!!) if the elements are getting power then it's the elements, if not it's the timer! DO NOT TRY THIS IF YOU ARE NOT QUALIFIED!!
Great video, thanks Charlie. But don't go to the hardware store to get a 6.5mm spanner - use a ¼ inch spanner!
Thanks. 👍
succesfukky fitted end element using only screwdriver , hand tightening all nuts. I am not sure if the end elements worm on both sides - there seem to be heat sinks on ends . first time |I tried it one way then the other. worked second time butbmaybe not properly fixed firt time . great viseo!
Thanks. Glad you found it useful. I'd get a spanner though and tighten those nuts properly as you don't want the connection arcing 👍
If you don't have a 6.5mm spanner, a 1/4 inch spanner will work.
Also, just be aware that there are two nut sizes, thick and thin. Just make note what goes where.
Thanks Charlie... well done. Question: You made no reference whether your issue was the element or the wiring to it. Is there a definitive way to tell from looking at the element alone(assuming one doesn't have a volt meter to test the wiring with)?
You're welcome. No, I'm afraid I wasn't that technical. I simply looked at the toast, saw which side wasn't cooking properly and replaced that element. The wiring is pretty basic and unlikely to fail, so if you've had your toaster for a number of years, chances are it's the element that's gone.
I want to replace the centre element from my Smeg toaster. Do they use the same element? Smeg don't sell replacements and I'm hoping I can use a Duelit one.
I think it's highly unlikely, unfortunately. Best thing to do is take out the existing element and maybe call Dualit to see how the dimensions compare. Also take a look at Espares and see if they sell anything comparable 🤔
@@CharlieDIYte I thought about doing that hoping the element might be by another make and have a part number. Thanks for the suggestion.
In the words of Columbo "just one more question", I can see where the element is damaged. One of the exposed metal wires is clearly severed. Am I right in thinking that a single break in the wire will stop the element from heating up, and is there any way to fix the break in the wire? I don't hold out much hope in finding a suitable replacement element in todays consume and dispose culture but dread the thought of throwing a good appliance away for the sake of one small (but fundamental) fault.
What about trying Google.....Could this be the one?
www.ebay.co.uk/i/153223762462?chn=ps
Nice, we can get these toasters in states as well.
Yours are a different voltage.
All you need is a 1/4 inch spanner or socket - available at most DIY shops
They will be metric not imperial
Yep,excellent.
Thank you ...
Plastic smell getting out of the toaster as it worked in the beggining. Do you think it is normal? Paula Fukuhara
Is this after replacing the element? Yes, I think there was an initial smell. Just check you've wired it up properly and there isn't any other plastic touching the elements.
Fantastic!!!
Good video but be aware that replacing the end element is not like replacing the centre element as you cannot access the screws easily. You can if you've got the kit ( a flat ratchet spanner with a 1/4" drive/ Phillips bit ) as fortunately I had. A normal Phillips won't do it as one Phillips screw is obstructed by the end panel. If you don't want to buy a 6.5 mm open ended spanner for one job ( hopefully never to be repeated !) a 1/4 AF should do it.
BTW How many toasters will you buy and landfill before you buy a repairable ( spares aren't expensive) Dualit? Ecology not to mention economy begins at home!
Thanks Bill - a timely comment because the end element will need replacing soon so I'll bear this in mind and might even do another video - to differentiate between centre and end element repairs. It's a shame they couldn't have designed that better - and using a 6.5mm spanner isn't great either because they're not widely available - you as you say the 1/4 AF is worth a shot.
Couldn't agree more - when I was growing up there was a local repair shop for all things electrical. Now as you say they just all go into landfill!
Heads up if you are changing end element and centre take both out together and then you have easy access to end nuts.
You need a left handed screw driver and a 1/4 AF spanner.
Is it really a 6.5 mm spanner and not just a 6 ? Thanks
It is unfortunately a 6.5mm spanner - not something that's easy to get.
Its probably a quarter inch nut, 6.35mm - 6mm too small
In 60 years of engineering and electrical repairs I’ve never seen a 6.5mm spanner. 6.35 mm, ¼”, of course. You’d need to find a very specialist supplier.
I am working on one of these right now. A 1/4" AF fits nicely, but a (vintage!) 4BA fits best of all.
@@paulwomack5866 Yes, of course you can find something that might more or less fit (as I did), but that's not my point. After all, you could use an adjustable spanner. As far as I am aware there are no 6.5mm spanners, in other words spanners that are designed and manufactured to an official 6.5mm specification. However, I suspect these are in fact 4BA nuts, but Dualit are too embarrassed to admit it, wanting to sound modern.
@@ricktherecorder4416 To expand on my "4BA fits best of all"...
Putting a micrometer on a couple of nuts, I got a consistent reading of 0.2475".
Checking my multi-standard chart of spanner AF sizes, 1/4" AF is (of course) 0.250, but 4BA is 0.248"
So I'm happy that 4BA is correct. :-)
en.wikipedia.org/wiki/British_Association_screw_threads
3:07 Best to clean under you finger nails before photographing your hands.
Just need the elements available in South Africa..., then I can fix mine...
You could probably find them on eBay and have them sent from the UK?
Pretty sure it's an old 1/4 inch spanner needed here.
Just to be really pedantic, you put the one height-adjustable foot back in the wrong corner. :)
It doesn't matter where it goes.
Those nuts are 4BA ! and also 6.5mm ....
£ 7 1/2 pounds each from Dualit Nov 2024
You can tell that it's made in Britain by the fact that they are using 6 and a half millimetre effing nuts . . . why the EFF can't use either 6 OR 7 mm nuts is beyond me, they're hardly structural.
Most, if not all, HANDYMAN metric spanner sets come in increments of 1mm, starting, usually, "around" 4-6mm. None that I've ever come across have had half millimetre increments.
Unless, of course, 6.5mm is the nearest equivalent to some imperial measurement.
Having just checked, of course it effing is. Quarter of an inch, which isn't 6.5mm it's 6.35mm and given that these nuts appear to be copper / brass they'll end up getting rounded off nicely with an incorrectly fitting spanner.
At 62 years of age, I'd hoped that I'd've seen the back of imperial tools by now . . . but no
FML
Yep, I agree. It's an imperial relic they need to change.
Glad you took the somewhat coarse observation in the spirit it was intended . . . not a pop at you more frustration aimed at Dualit. Guess who hasn't got a 1/4" spanner@@CharlieDIYte
Youmade no mention of the slots that the element slides into. You barely paid attention when sliding the element in. I'd check to see if your new element is properly retained in the slots if I were you
They were properly retained, and here's the update video ua-cam.com/video/TfEhtrrOd7Q/v-deo.html
80's porn music