How to install stop valve on pvc pipes as shown in the video will make the process of replacement or repair later easy and flexible! How do you see the idea of installing the valve on this pvc pipes ? Please leave your thoughts in this comment section! Thanks for watching !
Thank you for letting me know what you think about this! really great , I totally agree with what you said ! However, if it is installed like that, although it costs more to install, it will be effective in the future for the process of repairing and replacing the valve when it is broken? What do you think of this comment? Thanks for your enthusiasm!
@@hectorgarcia8691 Oh ! great for this! very happy that the video has brought you usefulness in real life! Wishing you and your family all the best and happiness! Please keep the good interaction! Thanks for your nice feedback!
Here in the US, if I was concerned about easy valve replacement, I would just use a Sharkbite valve. Otherwise, if replacement was necessary, I would just cut out a section of pipe and use cemented PVC couplers to connect a short stub on either side.
I'm Electronic and Electri Service Engineer . But ❓ I Like The Plumbing Work. Some Time I Fittings Water Pumps Plumber Works. Today I Got New Ideas. Once Again Thank You For Sharing..
That is the way I assembled my 160' deep well pipe, sans valve, but with couplers between each 20' section of pipe. Continuous poly is usually used but pulling the pump was a lot easier with the couplers when you don't have a crane and winch. Your technique (with one coupler as noted below) is a useful approach to replacing or adding a valve.
thanks for watching ! you are so kind to leave me a comment about this! Hope the video will be useful to you and everyone! See you in other videos of the channel!
I've been brainstorming how to install a 1 inch ball valve into a gravity fed pvc line from my spring fed water tank where it enters the house upstream from my water filter. No flex in the pipe so your suggestion is perfect! Plus, the valve is serviceable in the future without cutting remaining pvc again and again. Thanks!
Thank you for watching the video and leave me a comment! Glad you shared the same opinion! Wishing you and your family all the best and happiness! Looking forward to seeing your opinion in other videos on the channel! Thanks and good luck!
Use a single pvc push to fit (shark bite type or twist to lock) coupling on one side, glue the other threaded fitting direct. (only need one union or push fitting).
Wellcome ! Thank you for watching and leave me a comment! Hope the video will be useful to you and everyone! Looking forward to seeing you in other video content on the channel!
Thank you for this great feedback! Wishing you and your family peace and happiness! Hope to see you in other videos on the channel! Thank you for your kindness and awesomeness!
Thank you for these good things , may God bless you always with peace and happiness ! Looking forward to your feedback for other videos on h channel! Always welcome to my channel! good luck.
You only need one disconnect coupling, this is because once the coupling is un-threaded, the valve can simple turn to spin off the male connection on the other side.
what do you mean it would spin?.. both union when facing each other goes in clockwise and the other side is counterclockwise.. to make it spin with water pressure you need that two union facing in both clockwise or counterclockwise direction.
great idea. I'm planing to install a temporary water line source and want to redesign it after finishing some renovation and this idea really help although its costly but its really efficient rather than cutting and buying new pipe and fittings and this video really fits for low pressure water lines
I have had on my mind to install a shut off valve in the 3/4" PVC water line coming into my house for sometime now. This video is exactly what I needed to see to get my valve installed. Will get the parts today. Thank you very much for this video.
Thanks for your feedback! I am very happy for this , it is great that the video has been valuable to you , hope you enjoy the other video content in the channel ! Looking forward to hearing from you in other video content! Thanks for watching .
Thank you ! I'm so glad to see you here! I'm glad to make you happy! Hope to see you in other video content on my channel! Thanks and have a good time!
Thank you very much ! you are so kind to leave me a comment , hope you enjoy the content on other videos in my channel ! Thank you , wish you and your family always happy and successful !
Thank you !I'm glad it was useful to you and everyone! Hope my other video content will make you satisfied! I look forward to seeing you in my other videos!
❤ it's just amazing you are sharing your plumbing skills to assist people who never ever done any plumbing work which is really appreciated, sorry 4 some of the negative feedback in the comments section,have a great day
Thank ! In the process of creating content, I look forward to receiving your and everyone's evaluation, whether positive or negative, it is precious to me! Thank you for those comments! I look forward to receiving your feedback on other video content on the channel so that I can improve what is not on my channel! Thanks and good luck!
1. Only PVC valve (both end female socket type) will be just sufficient to replace. 2. At last you installed the valve diametrically opposite to that you saw in starting of video for correct direction of its lever. 3. Anyway, it is a nice video. 🎉
That's doing it the hard way. Also unless the pvc is schedule 80, the pipe is for electrical work and not code approved for plumbing. Maybe things have changed since I retired after 45 years as a plumbing contractor.
It gets tight to fast by hand, and it seems 2 be cross threaded . A diy could cross thread it. And if u have a rubber gasket in you don't have to tape it, maybe one revolution.
2 things u forgot . when u cut the pipe u have to deburr it. And second thing u have to clean it with a PVC Cleaner before u get the glue on. These are two very important things.
This guy seems to know what he's doing, so well done. Very educating video. Generally the problem with plumbers is that if you ask 10 of them how to solve plumbing problem X, they'll come back with 11 different solutions and then they'll start arguing with each other that everyone else is an imbecile and a fraud.
Thank you for your feedback! and I'm glad if you found this helpful, but if you feel dissatisfied then I'm sorry for these too! Sincere greetings from Vietnam
why have 2 unions when you only need 1? better yet: 1) use a sharkbite shut off (the 2 unions will more than pay for it). or with the shutoff (threaded) shown 2) use a single sharkbite straight connect. 3) sharkbite Quick Connect Push to Connect/John Guest Speedfit Union fitting (these are made out of pex). If its its outdoor or irrigation, use an orbit PVC-Lock fitting (push on). All of these will be cheaper and easier than 2 unions and all will allow shut off to be removed if it fails.
They sell the pvc valve with the unions already on them, much cheaper and less chance of leaks since no threads with teflon tape are used. and they are much shorter than what you put together. If for some reason you can't find the unions and need to fix a problem right away, a valve and 4 90's will work. glue the 90's on the valve and see how much you need to cut from the pipe with the other 2 90's on the pipe. Yes it will not be straight inline as before, so it might not work in some cases, but for most, it will.
How to install stop valve on pvc pipes as shown in the video will make the process of replacement or repair later easy and flexible! How do you see the idea of installing the valve on this pvc pipes ? Please leave your thoughts in this comment section! Thanks for watching !
Qààaà s CE CRee see see CR 2 we saw to
P
Welcome and Thank so much!
Kebanyakan sambungan coiii.....
hahaha ..huh costly
Correct idea but costly. Single Union can be sufficient
Thank you for letting me know what you think about this! really great , I totally agree with what you said ! However, if it is installed like that, although it costs more to install, it will be effective in the future for the process of repairing and replacing the valve when it is broken? What do you think of this comment? Thanks for your enthusiasm!
You just saved me 300 dollars that I was being charged by a plumber, thank you 😊
@@hectorgarcia8691 Oh ! great for this! very happy that the video has brought you usefulness in real life! Wishing you and your family all the best and happiness! Please keep the good interaction! Thanks for your nice feedback!
With a PVC shut valve..could save two couplers.
You know, there are pvc union valve thing, it combine those valve and union in a single thing..
nice. The advantage of this method is when it comes to change the ball valve..it makes it easier 👍
Thank you for watching and leaving a comment! I'm glad it was useful to you and everyone! Wishing you and your family peace and happiness!
Change a brass ball valve? 50 years from now. Plus not pvc, it poly
ball valves DO GO BAD. Got one on my irrigation system now. This would make it easier to fix. Thanks
And that would be once in a blue moon though 😂
Here in the US, if I was concerned about easy valve replacement, I would just use a Sharkbite valve. Otherwise, if replacement was necessary, I would just cut out a section of pipe and use cemented PVC couplers to connect a short stub on either side.
Thanks , sir!
Well, sharkbite doesn't fit pvc, it fits cpvc, copper and pex.
@@stevem1081thank you Steve for correcting this wanna be plumber. Saved me the trouble of dropping the hammer on him....
thank you so much, watching from Alaminos city Pangasinan Ph.
Welcome and Thank so much!
I'm Electronic and Electri Service Engineer . But ❓ I Like The Plumbing Work. Some Time I Fittings Water Pumps Plumber Works. Today I Got New Ideas. Once Again Thank You For Sharing..
thank you for sharing😮
Thanks you and good luck! let's keep interacting together!
You deserve a hug right now
great for this! Thanks for your appreciation! Wishing you happiness and fun always!
Thank you for showing this and very idea 💡 you r the best
Thanks you !
Very convenient for disassembly
Thank you, I'm so happy for this! Hope to receive your feedback in other videos on the channel! have fun.
That is the way I assembled my 160' deep well pipe, sans valve, but with couplers between each 20' section of pipe. Continuous poly is usually used but pulling the pump was a lot easier with the couplers when you don't have a crane and winch. Your technique (with one coupler as noted below) is a useful approach to replacing or adding a valve.
thanks for watching ! you are so kind to leave me a comment about this! Hope the video will be useful to you and everyone! See you in other videos of the channel!
Thank you very much
Excellent 👌
Buen video.Gracias por compartir.👍🙋🇪🇦
Thanks
I am a plumber and still watch this video ❤
Yess
I've been brainstorming how to install a 1 inch ball valve into a gravity fed pvc line from my spring fed water tank where it enters the house upstream from my water filter. No flex in the pipe so your suggestion is perfect! Plus, the valve is serviceable in the future without cutting remaining pvc again and again. Thanks!
Thank you for watching the video and leave me a comment! Glad you shared the same opinion! Wishing you and your family all the best and happiness! Looking forward to seeing your opinion in other videos on the channel! Thanks and good luck!
Use a single pvc push to fit (shark bite type or twist to lock) coupling on one side, glue the other threaded fitting direct. (only need one union or push fitting).
What a good idea to apply for...Thanks.
Wellcome ! Thank you for watching and leave me a comment! Hope the video will be useful to you and everyone! Looking forward to seeing you in other video content on the channel!
THANK YOU VERY GOOD AND FUN VIDEO!
THANKS MY FRIEND!
@@dailytricks6161 I Subscribed To Your Channel And Shared Your Videos. Thank You For Responding To My Comment. I'm Very Happy For That. Thank You !
Mantaf tq for infornation👍👍
thanks you!
Mantap...sangat bermanfaat.....
thanks you!
Very useful for repair myself.
Good information sir
thank you somuch ! have nice day!
Super buenas ideas
Thank so much
Thanks for your Idea WE can need that one day
Thank you ! I'm really happy for this! Hope to see your feedback for other video content on the channel! have fun.
Nice idea, you can easily change the valve once broken.
Thank you for this great feedback! Wishing you and your family peace and happiness! Hope to see you in other videos on the channel! Thank you for your kindness and awesomeness!
Once broken, I just cut another one next to it. Same result but uglier. 😅
Hay lắm ak.nhớ ra nhiều video nữa nhé
Thank you for watching and leave me a comment! Wish you success soon and always happy !
Appreciate💕 both you and your Shares Thank you
Thank you for these good things , may God bless you always with peace and happiness ! Looking forward to your feedback for other videos on h channel! Always welcome to my channel! good luck.
Good lesson tanks
thanks!
You only need one disconnect coupling, this is because once the coupling is un-threaded, the valve can simple turn to spin off the male connection on the other side.
Thank you ! I will think about these! Thank you for watching and thanks for the feedback! wish you happy
what do you mean it would spin?.. both union when facing each other goes in clockwise and the other side is counterclockwise.. to make it spin with water pressure you need that two union facing in both clockwise or counterclockwise direction.
Avoid maximum joints, then only required one union!
Only one 🤔 isnt it better with two? Also arent those unions?
Excellent method onday a client asked the same question. How to connect ball valve?
spectacular ocean until you're officially captivate me...great
Wellcome ! Nice to see you here! Thanks and have a good time , hope to receive your comments for other content on the channel !
Hoy aprendí contigo 😮
Wooow... very very amazing
Thanks you! Have Nice day
Good job sir
thanks you!
great connection
thanks !
very creative and it worked for me
Thank you ! I am very happy to receive your noble deposit ! Wish you always happy and successful! Welcome to my channel, thank you for watching!
Wonderful shot
welcome and thank so much !
Excellent
thanks you for watching ! Hope to see your comments for other content on the channel! Thanks and have a nice day!
great idea. I'm planing to install a temporary water line source and want to redesign it after finishing some renovation and this idea really help although its costly but its really efficient rather than cutting and buying new pipe and fittings and this video really fits for low pressure water lines
I have had on my mind to install a shut off valve in the 3/4" PVC water line coming into my house for sometime now. This video is exactly what I needed to see to get my valve installed. Will get the parts today. Thank you very much for this video.
Thanks for your feedback! I am very happy for this , it is great that the video has been valuable to you , hope you enjoy the other video content in the channel ! Looking forward to hearing from you in other video content! Thanks for watching .
Don't do it this way use pvc valve and a slip coupling
Ide cemerlang, salam kreatif
Thanks you so much, Have a good time !
Great job, man
Enjoyed the finger pointing.
Hi
Very good idea
Good awareness
Молодец,👍
welcome and thank so much !
Very good cogragulation.
thanks for the sharing. it's very necessary for me
Thank you ! I'm so glad to see you here! I'm glad to make you happy! Hope to see you in other video content on my channel! Thanks and have a good time!
I will try with these tips
Thanks and good luck! I'm glad you're satisfied!
Very good nice videos like ❤❤👍
thanks you!
Good tricks for life
Thank you very much ! you are so kind to leave me a comment , hope you enjoy the content on other videos in my channel ! Thank you , wish you and your family always happy and successful !
great video bro
Welcome and thanks!
i love you your idea
Welcome to my channel! It's a pleasure to receive your comments! Hope to see you in other videos! Thanks and have a good time!
Simple and useful tips
Thank you !I'm glad it was useful to you and everyone! Hope my other video content will make you satisfied! I look forward to seeing you in my other videos!
❤ it's just amazing you are sharing your plumbing skills to assist people who never ever done any plumbing work which is really appreciated, sorry 4 some of the negative feedback in the comments section,have a great day
Thank ! In the process of creating content, I look forward to receiving your and everyone's evaluation, whether positive or negative, it is precious to me! Thank you for those comments! I look forward to receiving your feedback on other video content on the channel so that I can improve what is not on my channel! Thanks and good luck!
This is stupid in fact. See others for simpler.
1. Only PVC valve (both end female socket type) will be just sufficient to replace.
2. At last you installed the valve diametrically opposite to that you saw in starting of video for correct direction of its lever.
3. Anyway, it is a nice video.
🎉
Thanks for your comments , this is great for me ! Thank you and thank you for your compliments! Wishing you and your family peace and happiness!
Good 👍
thanks you! have good time 😆
hey I wanted to ask if we can use " metal repair paste" on blue pvc pipe water??
I think it's not possible, because each will have different composition and mechanical properties and that would probably be what makes it unsuitable!
@@dailytricks6161 thank you
@@moctarusman6431 Thank you! hope that's right! Wishing you joy and happiness !
Thank you
good job bro, keep it up
thank so much, my friend !
Muito interessante a técnica. 😊
Breathtaking 💖💖
welcome
Thanks! Makes it easy, practicable & safe as well as caters for future maintenance if need 👍
Thank you for these words of encouragement! Wishing you and your family peace and good luck!
@@dailytricks6161 Most welcome & deserved 👍
@@bhimroopnarine3591 thanks!
People talking about adding two leak weak spots, big deal, if happens, just install new o rings.. Nice video Sir.
thank you , you are so kind to leave me these words of encouragement ! Have a nice day and full of energy!
Sweet :) , it is Such a pretty video
welcome and thank so much !
Wonderful💮
Thank so much ! Have Nice day.
Beautiful Videos 🍧
Thank you! Cheers!
good tips. very creative
Thanks ! Wishing you and your family happiness and success! Hope to see you in other videos on my channel! wish you happy! thanks for watching !
Very good ❤
The purpose of using union in this TUT in next changing of stop valve you won't cut a piece of pipe. Nice idea.
thanks you!
Yang saya ambil pelajaran dari ini adalah cara pasang pipa dari berbagai macam kegunaan alatnya.
That's doing it the hard way. Also unless the pvc is schedule 80, the pipe is for electrical work and not code approved for plumbing. Maybe things have changed since I retired after 45 years as a plumbing contractor.
Thanks sir! Each region will have different standards and practices! Sincere thanks for your feedback! Good health to you sir!
Nice idea bro.
Thanks
You're right about one thing I'm a plumber and I shouldn't have watched this😂😂😂
Thanks bro!😜😜
I can think of several items to apply to this so it will be good for UA-cam revenue 😊
Now u have 2 find where they sell it and name of it. Also 2 much thread tape can easily cross thread it when screwing on.
To much tape can cause it to split would only cross thread if you make it do so
Absolutely agree.
It gets tight to fast by hand, and it seems 2 be cross threaded . A diy could cross thread it. And if u have a rubber gasket in you don't have to tape it, maybe one revolution.
Muy buena técnica . Yo lo hago con una sola tuerca union
Of course you can use 1 to install, but in this video I'm using 2, however this also makes the disassembly process easier later!
OMG😍,Awww💞 I love this
thank you ! thanks for liking
ممتاز جدا جدا شكرا لك يا بطل
Wellcome ! Wishing you peace and happiness!
@@dailytricks6161 وكذلك مرحبا مليون وبعملك الجميل جدا جدا
Good for you
Outstanding
Все сделано классно но есть один вопрос какой клей использовали
Using conduit for water pipe looks like problem number one.
THANKS
My man said “Thanks” 🤣🤣🤣🤣 oh my goodness UA-cam is full with clickbait videos
2 things u forgot . when u cut the pipe u have to deburr it. And second thing u have to clean it with a PVC Cleaner before u get the glue on. These are two very important things.
Thanks you , sir!
@franksengatti5499
Yeah maybe thats Luck, but i work with this Things almost every Day and these These Tipps are important
Muito bom.....RJ,vou fazer
Great
Thanks you ! Have Nice day
Nice
Thank you for this positive feedback! Wishing you and your family peace and happiness! Hope to see you in other videos on the channel!
Mistaken installation of union union must gap around 10 cm. From the valve if pipe have more distance.
thanks!
Yes give a space so that easy to reinstalled .
This guy seems to know what he's doing, so well done. Very educating video. Generally the problem with plumbers is that if you ask 10 of them how to solve plumbing problem X, they'll come back with 11 different solutions and then they'll start arguing with each other that everyone else is an imbecile and a fraud.
Thank you for your feedback! and I'm glad if you found this helpful, but if you feel dissatisfied then I'm sorry for these too! Sincere greetings from Vietnam
why have 2 unions when you only need 1? better yet: 1) use a sharkbite shut off (the 2 unions will more than pay for it). or with the shutoff (threaded) shown 2) use a single sharkbite straight connect. 3) sharkbite Quick Connect Push to Connect/John Guest Speedfit Union fitting (these are made out of pex). If its its outdoor or irrigation, use an orbit PVC-Lock fitting (push on). All of these will be cheaper and easier than 2 unions and all will allow shut off to be removed if it fails.
Thanks for your information! I appreciate these very much!
Exactly. An idiot who should learn instead of making videos spewing nonsense.
Beauty❗
thanks you! have nice day !
cool lovely looking
Thanks for liking, love you !
3:08 This is completely reasonable and necessary because every time it breaks, you just need to lock the valve to fix it easily and very conveniently
Can i use this glue for drinking water pipes ?
Why didn't you just add a few more plastic connectors just for the hell of it? Just to make the video a little longer and confusing.
thank you for watching and thank you for reminding this , this is awesome ! Wish you always cheerful and happy !
Gosh😉 Very very Fine
great to see you! Thank you and have a good time, look forward to seeing you in my other videos!
Just magnificent 🌹🌹
thanks !
Who makes the cutting tool you have
Hello ! Thanks for watching and for your feedback! Wishing you happiness and peace always!
Just search ratchet PVC cutter
They sell the pvc valve with the unions already on them, much cheaper and less chance of leaks since no threads with teflon tape are used. and they are much shorter than what you put together. If for some reason you can't find the unions and need to fix a problem right away, a valve and 4 90's will work. glue the 90's on the valve and see how much you need to cut from the pipe with the other 2 90's on the pipe. Yes it will not be straight inline as before, so it might not work in some cases, but for most, it will.
easy for maintenance
There may be other ways to do it that are also good and useful! Thank you!