Worked perfect , mine has been spinning and making noise for ever , now every start is perfect , springs were week , stretched them out a bit and boom all fixed and it only took me 20 minutes . Thanks again , i thought the starter was the issue ......
Just replaced my startor on my tao tao 110cc and now it makes a grinding noise really loud you think this will be the issue thank you for the tutorial videos
My kids apollo quad, same thing but the big gear popped right off the fly wheel so I'm trying to take it off and I might just tac weld it. Just need a puller
Iv had to replace my flywheel because of some springs where missing from someone messing replaced that but the shaft doesn't spin? Starter turns as does both starter sprockets, does the lower sprocket bike/link into the shaft?
Good video! I have a Kazuma full size 110cc that I am trying to get it to shift easier.....mine has the 4 bolt cover on right hand side of engine where most the clutch adjustment is on outside of engine.
I think this is exactly what I needed to see. I know this might be a little too late as this video is two years old but Is the fly wheel chain to the starter real tight?
Estes Landscaping It was tight for sure. Haha that was my first thought too. Or that I sheeted a tooth on the starter haha. The fly wheel simply wasn’t gripping tight enough on the shaft for it to turn it over. Thanks for the thought though! Glad I was able to help!
Mine sounds like the starter wants to explode lmao 🤣 just installed days ago new... damnit 😫 so is there a better flywheel??? Like a mild performance that won't have this issue????
+GT GoQ sounds like the idol is turned up too high. Make sure the throttle is going back all the way and that the line isn’t seized. Also look on your carb. There should be a flat head screw on the right side turning it counter clockwise will turn the idol down. Hope that’s helpful. Cheers
@@gtgoq8229 I'm having the same problem and starting to hate this damn thing-- I've had the stator cover off about 20 times-- it wants to start and goes 'putt putt putt' but never actually goes. My chain seems pretty tight too. Wonder if you will see this and if you got yours going....
@@wandajames6234 If you ve adjusted the idle and it still doesn’t work, check if your valves are in line. It’s common problem on those bikes. Your battery also has to be close to 13v. Those were usually mines problems
Im in same situation ..Do i buy a new flwheel it comes with the new clutch...i looked all over parts kit is my main source..Thankx for the video! I gota pull mine apart and hope i can do this...
Kari Mullen that’s what mine was doing too. It would make a grinding noise then just spin and not catch or turn the engine over at all. It’s possible that you are running into this issue. 3 in 6 month is s lot wow! I wonder if there is maybe a leak or a gap in the gasket of the side casing.. maybe dirt or something keeps getting in and jamming up the bearings?
We haven’t tried this yet, but when we ordered one it stated it was 22mm center home, when actually measured it was 21.88... it wasn’t fitting like it should
Kari Mullen that really sucks! You might be able to hone it out. Some garages have the tools to hone or bore it out that extra .12mm. I hope you are able to get it! You could also maaaybe try getting some dry ice... if you burry the shaft in dry ice it might “might” contract the meter enough to get the fly wheel on before it re-expands. Hope it helps :)
Hi man i beg you to help me, i have a chinese atv, it has no gears and no reverse just forward. The problem is that when it's off and i try to move the quad around the rear tires won't turn they drag around. Now i can't start it cause the starter has a hard time turning the engine over. Thanks in advance
It sounds to me like the clutch won’t disengage. There might not be much I could do to help. The clutch is inside the engine housing usually. Do you find that when you do get it started it wants to just take right off? That would be another sign it’s the clutch. If not the clutch it could be the rear break calliper stuck on. Hope this helps
Bobymickzouskins - hypixel skywars and pvp I applied pressure behind the fly wheel with a pry bar and with the nut on enough to protect the threads of the shaft I hit the shaft with a mallet. A couple of good whacks and it slid right off. Hope that helps
BEJKxxx to get the fly wheel off? I used a pry bar around the edge and tapped it alternating sides. You can get actual fly wheel pullers but I went low tech hehe. It can take some time. I would also suggest spraying in some penetrating oil of some kind. Hope it helps. Thanks for watching and good luck!
I was wondering why this was happening to ours. Thanks man!
Same problem. This the best illustration vid I found on the issue. Thanks
Gabe Dudley glad I was able to help! Thanks for watching
Thank you my friend I have the same problem in my tao tao, so and I will already deal with the subject. Thank you from Portugal
Dude thanks , im fixing mine tonight 👍👍
Worked perfect , mine has been spinning and making noise for ever , now every start is perfect , springs were week , stretched them out a bit and boom all fixed and it only took me 20 minutes . Thanks again , i thought the starter was the issue ......
Man I watched 100 wrong video's this is the 1 I needed and it was my spring I think you should change the title to China quad starter clunk fix
Bart Simpson I’m really glad I could help!! Take care.
U made my day man!just replaced my starter in a 110 for nothing.now I know what I have to do
got the same problem with my quad starter thanks for the video and information dude
+Sam Mallaby no problem:) hopefully it’s able to help. Thanks for watching!
Mine the gear and the chain is spinning freely. No grinding noise
Just opened up mine and the fly wheel keyway is shot aswell as the housing for it. No wonder it wasn't starting. thanks bud.
Just replaced my startor on my tao tao 110cc and now it makes a grinding noise really loud you think this will be the issue thank you for the tutorial videos
Thanks I really needed this
My starter turns in one derection my flywheel locks in the wrong drection what am I missing
My son's 110 is grinding when you go to start it is there any way to get that off without a impact
My kids apollo quad, same thing but the big gear popped right off the fly wheel so I'm trying to take it off and I might just tac weld it. Just need a puller
They keep making these things stupider and stupidurrrr
This is my exact problem this helped 🙏🏽
How was you able to get your flywheel off
have video on clutch
I have the same issue thanks so much!
Daaang...I never could find out what the hell..I just bought another engine today anyway but now I can fix my other...THANKS ALOT BRO.!!!!!
Great video!
Iv had to replace my flywheel because of some springs where missing from someone messing replaced that but the shaft doesn't spin? Starter turns as does both starter sprockets, does the lower sprocket bike/link into the shaft?
Bro THANKYOU I’m having the exact same issue couldn’t find anything online your a lifesaver man
Thank you . I have the same problem easy fix
Good video! I have a Kazuma full size 110cc that I am trying to get it to shift easier.....mine has the 4 bolt cover on right hand side of engine where most the clutch adjustment is on outside of engine.
It really help thanks 😊
You’re a f-ING legend. Perfect for newbies and people like myself. Thank you for the video
I'm having this problem.
Thank you bro this is exactly what I needed to know
+Milli_cbr.f4i glad I could help!!
So did it not turn over engine it’s self as think I got same problem but bigger issue is my nut welded on
It would just spin and make a clacking sound. Like it was trying to bite but couldn’t. Then once in a while it would.
Thank you for showing, I had the same issue with my son’s atv , fixed and running, like a champ !!
Was it a automatic? Having same problem with my 110
You're missing the chain tensioner on the right side.
Thanks for the info I was having the same issue and utube was no help thanks alot for this.
great solved my problem thanks
Thanks for the video.
I think this is exactly what I needed to see. I know this might be a little too late as this video is two years old but Is the fly wheel chain to the starter real tight?
Estes Landscaping It was tight for sure. Haha that was my first thought too. Or that I sheeted a tooth on the starter haha. The fly wheel simply wasn’t gripping tight enough on the shaft for it to turn it over. Thanks for the thought though! Glad I was able to help!
Nation Valley Riders now I just need to order a fly wheel puller tool...
Estes Landscaping I was able to use a pry bar and gently tap it around the shaft to work it off. It took some time but no puller was required.
Estes Landscaping and put a bolt in the end of the shaft and get a few whacks with a mallet helps too. Lol.
Mine sounds like the starter wants to explode lmao 🤣 just installed days ago new... damnit 😫 so is there a better flywheel??? Like a mild performance that won't have this issue????
Horrible grinding sound and won't start rn 😪 it's for my daughters bike
Great to know..! Thanks a bunch 👍
Hi
Great job , I’m stuck myself
How do you remove the magneto for the stator ??
Grateful for the help 🙏
What size are the engine with starter on bottom?
One of the best videos ever made. Str8 to the point
cheers for the video mate it helped me out ps I have subbed
Awesome, thanks man very helpful.
Hey man when I start mine, it immediately starts moving without giving any throttle could you please help
+GT GoQ sounds like the idol is turned up too high. Make sure the throttle is going back all the way and that the line isn’t seized. Also look on your carb. There should be a flat head screw on the right side turning it counter clockwise will turn the idol down. Hope that’s helpful.
Cheers
@@chaserodley thank you it end up being stuck throttle slide in carburator
@@chaserodley well now its not starting at all there is compression, gas, spark, and still doest start even after cleaning carb
@@gtgoq8229 I'm having the same problem and starting to hate this damn thing-- I've had the stator cover off about 20 times-- it wants to start and goes 'putt putt putt' but never actually goes. My chain seems pretty tight too. Wonder if you will see this and if you got yours going....
@@wandajames6234 If you ve adjusted the idle and it still doesn’t work, check if your valves are in line. It’s common problem on those bikes. Your battery also has to be close to 13v. Those were usually mines problems
Thanks, this is exactly the problem I have encountered with a Coolster but had no idea how the clutch mechanism worked. Appreciate the video.
What’s size is the fly wheel pulley? 27mm 28mm?
I’m terribly sorry. I don’t remember.
Hello from Estonia 😁
Thank man saved some time for me
So thank you 🙂
Hey! Glad I could help!
Im in same situation ..Do i buy a new flwheel it comes with the new clutch...i looked all over parts kit is my main source..Thankx for the video! I gota pull mine apart and hope i can do this...
KERNFUZED goodluck! So far mine has had no issues since adjusting the spring. Let me know how it goes! :)
We have went through 3 starter clutches with in 6 months!! Could this be the issue?? It won’t catch, almost a grinding
Kari Mullen that’s what mine was doing too. It would make a grinding noise then just spin and not catch or turn the engine over at all. It’s possible that you are running into this issue. 3 in 6 month is s lot wow! I wonder if there is maybe a leak or a gap in the gasket of the side casing.. maybe dirt or something keeps getting in and jamming up the bearings?
We haven’t tried this yet, but when we ordered one it stated it was 22mm center home, when actually measured it was 21.88... it wasn’t fitting like it should
Kari Mullen that really sucks! You might be able to hone it out. Some garages have the tools to hone or bore it out that extra .12mm. I hope you are able to get it! You could also maaaybe try getting some dry ice... if you burry the shaft in dry ice it might “might” contract the meter enough to get the fly wheel on before it re-expands. Hope it helps :)
Great video
Hi man i beg you to help me, i have a chinese atv, it has no gears and no reverse just forward. The problem is that when it's off and i try to move the quad around the rear tires won't turn they drag around. Now i can't start it cause the starter has a hard time turning the engine over. Thanks in advance
It sounds to me like the clutch won’t disengage. There might not be much I could do to help. The clutch is inside the engine housing usually. Do you find that when you do get it started it wants to just take right off? That would be another sign it’s the clutch. If not the clutch it could be the rear break calliper stuck on. Hope this helps
@@chaserodley thanks i will check the rear break calliper but i don't the its the break cause why would the starter be finding it hard? Thankd
@@lyricsworld6861 yeah, that’s why I would be leaning more on the clutch binding.
@@chaserodley do you have social media or something? So i can send you pictures , i would appreciate it a lot
@@lyricsworld6861 yep. Nationvalleyriders@gmail.com
thank you!!
What tool did you use to take off the flywheel
Bobymickzouskins - hypixel skywars and pvp I applied pressure behind the fly wheel with a pry bar and with the nut on enough to protect the threads of the shaft I hit the shaft with a mallet. A couple of good whacks and it slid right off. Hope that helps
New Subscriber!
Thank you!
Rubio Family glad I could help!
IT help me
1:05 I massaged it out and it got longer.then i put it back in...... Me: Hmmm I see.....
Great video. I have question. How remove ring (0:52)?? thank you
BEJKxxx to get the fly wheel off? I used a pry bar around the edge and tapped it alternating sides. You can get actual fly wheel pullers but I went low tech hehe. It can take some time. I would also suggest spraying in some penetrating oil of some kind. Hope it helps. Thanks for watching and good luck!
@@chaserodley Thank you very much for your answer. I tried using a puller but nothing. I sprayed the wd40 and I'll try again tomorrow.