AORUS x LIAN LI ft. RAZER

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 1,3 тис.

  • @ncgrave4586
    @ncgrave4586 3 роки тому +17

    gotta say, the sax is a most welcome change as opposed to all the other build vids with the same style of music for vids.

  • @johnwalkowiak5766
    @johnwalkowiak5766 3 роки тому +40

    So I finally convinced myself to make a budget build and save some money.. Then you post this build online!!! Absolutely gorgeous!! Time too rethink my priorities.. GRRR!! Great job one of the best I've seen

    • @Hobbyist16
      @Hobbyist16  3 роки тому +3

      Thank you! Did the same thing 5 months ago 😅 end up buying what I really want 🤣

  • @ultimateblizzard8956
    @ultimateblizzard8956 3 роки тому +9

    I've finally seen it and I can say that it's a great PC Build!! Those fans!! Those Custom cables!! That gaming Monitor!! That GPU!! Everything was perfect!!
    Keep up the good work man!!
    And yes!! that music was catchy!!!
    That sax 🎷man!! I really love it ❤!!

  • @dragon501000
    @dragon501000 3 роки тому +2

    Writing this today since your build is exactly my dream build which I'll be buying early next year. Apart from my wanting a white case and fans and an RTX 3070 Version GPU Aorus master, but all in all your build is exactly what I envision. Thank you for this, it puts a very huge smile on my face.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you, you will have your dreams come true. Trust the process. I was like that last year 😁

    • @dragon501000
      @dragon501000 2 роки тому +1

      @@Hobbyist16 Hi again just want to ask how's RGB fusion on your end? Is it as bad as they say it was or is yours just doing fine along with the Lian Li RGB program?

    • @Hobbyist16
      @Hobbyist16  2 роки тому +1

      Hello, mine is doing great so far no problem encountered since day 1

    • @dragon501000
      @dragon501000 2 роки тому +1

      @@Hobbyist16 Hi again just want to ask I saw that your AIO uses 6 fans, what configuration are those? like which 3 fan is intake or outtake?

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      @@dragon501000 both of them are for exhaust. Called push pull method

  • @JuegaPepeyito
    @JuegaPepeyito 3 роки тому +41

    My Dream PC Build

    • @Hobbyist16
      @Hobbyist16  3 роки тому +13

      You will get yours, someday ❤️

    • @teebo5298
      @teebo5298 3 роки тому +1

      Same build but I got the strix 3080 I call it my ui goku build. Good luck to you buddy of owning one

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@teebo5298 nice

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @Happy Gamer nice duo! Enjoy gaming! ❤️

  • @danzosarutobi6409
    @danzosarutobi6409 3 роки тому +2

    Very very satisfying to watch. Congratz on the pcmasterrace! Im about to build mine too soon but with an rx6800.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Thank you! Good luck on your build and most important there is enjoy it.

  • @Flamewolf2009
    @Flamewolf2009 3 роки тому +8

    Have this same build with a 3080 though and minus the strimers. Looks dope!

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Wow, that's nice! Happy gaming!

  • @Blynder
    @Blynder 3 роки тому +1

    I have the same G skill trident rbg ram and my white doesn’t look as bright as this 😔

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Is it neo version?

    • @Blynder
      @Blynder 3 роки тому +1

      @@Hobbyist16 it’s the normal rgb series. Could that be why? I was originally going to go with the neo version but I was gonna pair it up with a 10900k but I read that the neo version was meant for AMD Ryzen CPU’s

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@Blynder it's G.Skill Trident Z Neo not the normal rgb version.
      Neo is optimizes for amd but it will also works for intel. Vice versa for the normal trident rgb version that was optimized for intel.

  • @KOT-ANGRY
    @KOT-ANGRY 3 роки тому +22

    I want that all too, EXCELLENT build 🤎

  • @PCG2022
    @PCG2022 2 роки тому +1

    Is there away to hide the wires behind the x3 fans at the rear of the case? I've just removed the 3 rear plates for the fans and I don't even think there is anywhere to hide the wires from the front of the case ie power button/reset etc & you have the x3 rear fans blowing air into the case same as me but wouldn't the top dust filter fit on there? as I am using the top as an exhaust outlet. Just an idea and would maybe hide the cables a bit more.

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      Same I am using the the top as exhaust. There's a cover that comes with the case to cover the cables behind the case.

    • @PCG2022
      @PCG2022 2 роки тому +1

      @@Hobbyist16 Really? What would this look like? because I only have the centre cable cover for the middle of the case. Thanks for reply. 😉

    • @Hobbyist16
      @Hobbyist16  2 роки тому +1

      Check lian li website for the extension bar for o11dxl

    • @PCG2022
      @PCG2022 2 роки тому +1

      @@Hobbyist16 Thanks. I checked online & I don't have one:( but I have used the magnetic dust cover off the top & it works well:) Can you plug a 5" display into the motherboard on a i9 12900k z690 board or do you have to use gpu? Unsure if you have one as I'm just replying and not watched video again but I know u know your stuff :)

    • @Hobbyist16
      @Hobbyist16  2 роки тому +1

      @@PCG2022 you'll need to connect it to the gpu 😁

  • @ImranSheikh-ly9qj
    @ImranSheikh-ly9qj 3 роки тому +6

    Amazing build man! Looking forward to get mine done very soon 😍 hope you having fun with it 👍😉

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you! Good luck with your build! Enjoy it! ❤️❤️❤️

  • @Atharyel
    @Atharyel 3 роки тому +1

    Have the same exact build, just without strimers but ModMesh Pro cables and a RTX3090. Looks quite good but I don’t like your cable Management, especially in the lower left corner. I routed those usb headers etc. underneath the motherboard instead of using those cutouts, looks much cleaner.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you. Wow that's nice. Well after the video shoot I redo the cable management and change some of the placing of cables and also the gpu support bracket.

  • @NM-ok7zz
    @NM-ok7zz 3 роки тому +3

    The dust whispered. "I'm coming and get you". Great Build!

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you, I am dusting it ever week :)

  • @dannyfaber5782
    @dannyfaber5782 2 роки тому +2

    der 16000'ste Like, na da muss was kommen :p. Ist nen echt geiler Rechner!!!!!!!

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      I'm sorry, I don't understand your comment. But thanks for being here ✌🏻

  • @nicholaskelly7123
    @nicholaskelly7123 3 роки тому +7

    Looks amazing. I watched this build a couple weeks ago and I knew this is what I wanted. I just built mine today after searching for 6 weeks for parts. Everything is the same except I have i9-10900k, Aorus 3070, and Kraken Z73.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +3

      Thank you!
      Nice, congratulations on your build bro! That z73 ❤️❤️ happy gaming 🤜🏻🤛🏻

  • @birchkman7834
    @birchkman7834 3 роки тому +1

    Does the white on the trident z look a little bit yellow in person? Or is it like the Lian li fans. I’m wondering because mine don’t look white like yours do but I know camera captures light different than our eyes

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      My trident z is whiter than the lian li fans.

  • @LLD1992
    @LLD1992 3 роки тому +25

    Love the pc, really great build aesthetically and power wise. Good music and love that you like Gundams too!!

  • @FleyEnder
    @FleyEnder 2 роки тому +1

    Hey what’s the RGB light setting you have? Is that just plain white or is it a bluish tint? Looks really nice. Also is the airflow on the bottom intact or exhaust?

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      Plain white in each rgb app.
      Thank you ☺️

  • @NuttyGamingOP
    @NuttyGamingOP 3 роки тому +3

    To the Gamers who is reading this, don't give up on your UA-cam channel. Keep going, it's going to get better

  • @NasrAhmadTv
    @NasrAhmadTv 3 роки тому +1

    An awesome, giant, and distinctive collection for content makers.

  • @redfalkon84
    @redfalkon84 3 роки тому +4

    Didn't see if anyone asked this but I just ordered a meshify 2 and was wondering where you got that gpu bracket?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +4

      The gpu bracket comes with the lian li o11dxl

  • @quikx91
    @quikx91 3 роки тому +2

    I came across your video, quick question! On the CPU Cooler why 6 fans? Iknow one side is for intake to cool cpu but what about other side? Thanks Nice Build Btw

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      It's called push pull method. The other one is pushing air "bottom" while the other is sucking air out "top"

  • @kehkeshashamim8923
    @kehkeshashamim8923 3 роки тому +3

    I want to use ryzen 7 5800 x with aorus x570 mater is it compatible with it?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Yes it is. 😁

    • @kehkeshashamim8923
      @kehkeshashamim8923 3 роки тому +2

      @@Hobbyist16 will it not overkill ? Or something like that

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@kehkeshashamim8923 depends on how you use it. I am currently using ryzen 9 5900x for gaming streaming, video editing and etc.

    • @kehkeshashamim8923
      @kehkeshashamim8923 3 роки тому +2

      @@Hobbyist16 I will use my ryzen 7 5800x for gaming , editing , streaming , educational purposes , coding . What motherboard you recommend using gigabyte B550 aorus pro ac or gigabyte aorus B550 pro or gigabyte x570 master aorus ?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      If you have extra budget go for b550 master it's only a few dollars difference.

  • @A.Sostan
    @A.Sostan 2 роки тому +1

    Once again awesome build but I have Another question. Assuming I have 12 unifans fans in my case; 6 on the radiator for the push pull config and 3 on the side and 3 on the bottom, how would I be able to put another fan in that single back spot like in this video? Since the unihub only allow for 4 sets to be connected to it. Me adding another single fan would require another spot on the unihub which it doesn’t have. I don’t wanna use the 3 NZXT fans that came with my NZXT Z73…

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      Thank you. every 3 fans 'set' of unifan should come with unihub.

  • @ahmedc4668
    @ahmedc4668 3 роки тому +4

    I lost count on the amount of time’s i have watched this just for the tune

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Oh man! Thank you so much for your support, glad you like it.

  • @BottledJoy
    @BottledJoy 3 роки тому +1

    How many Lian Li Uni Fans did you install in this case? 10? Did you put the lian li uni fans onto the galahad?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      10 sl120 fans - I also used fans that comes with the galahad. So 13 fans in total

    • @BottledJoy
      @BottledJoy 3 роки тому +1

      @@Hobbyist16 what software do you use to sync the rgb on the fans, strimmer, ram and gpu?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@BottledJoy rgb fusion bro, tho it's crappy. Later I switched to their respective controllers

  • @aleksandrburmin4943
    @aleksandrburmin4943 3 роки тому +3

    Довольно приличное видео по сборке компьютера для начинающих.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you!

    • @ЯрославМусієць-ф3з
      @ЯрославМусієць-ф3з 3 роки тому +1

      Интересно только одно, где начинающий может взять столько средств на такой ПК?!)))

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@ЯрославМусієць-ф3з A build a lot of rigs for my friends, family and whoever needs my help, I'm an IT, so things like this is not new to me. 😁

  • @kelvinvanmaas4661
    @kelvinvanmaas4661 3 роки тому +1

    so did u get a rgb controller with all the packages of the fans? and if so did u use all the controllers for every set of fans, or did u connect alll the fans to 1 controller? i want to buy these fans but the price for 3 fans and a controller is 250 dollars, and that doesnt feel like the right price..

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      yes I do get fan controllers for every 3 pack fans. I only use one controller for all of the fans.

  • @sbravia23
    @sbravia23 3 роки тому +5

    Amazing build man congrats, can you link me to that fan riser you used for the bottoms fans thanks, again this came out fire!

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you! Fan mount is included in the casing. My case is Lian Li O11DXL rog edition.

  • @drewn1234
    @drewn1234 3 роки тому +1

    Dream build for me. Gonna plan budget for it and it'll be my first DIY build. BTW, with 10x sl120 and 3x120 fan from Galahad, do you connect them all to the UniFan controller? And how many lianli controller u used? Do you connect the Strimer to unifan controller or u connect to ARGB on MOBO? Thanks in advance

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Go for it bud! Good luck and enjoy!
      All sl120 is connected with one hub, aio fans is connected to the mobo. While strimer plus is using its own hub, you can connect the strimer plus to argb slots.

  • @Thefreewind
    @Thefreewind 3 роки тому +24

    i hate you guys for making me this depressed :'( , looks great

  • @ErselElric
    @ErselElric Рік тому +2

    Why do you put 2 side of Fun to do liquid cooler radiator?

    • @Hobbyist16
      @Hobbyist16  Рік тому

      You mean push/pull method on the aio?

  • @zulvanachsan
    @zulvanachsan 3 роки тому +4

    Amazing build, I think you can change the thumbnail with the pc image when rbg lighting.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +3

      Thank you! I appreciate the feedback, I'll look into it.

  • @Szabby999
    @Szabby999 2 роки тому +1

    Hi! I am new to RGB stuff. Would you please tell me, if I want to have the exact same light effect in the RGB cables like in the very end of the video, what equipments or parts do I need to buy and what is the name of that light effect? Thank you!

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      I just set all the parts on white

  • @morne7840
    @morne7840 3 роки тому +3

    Nice build bro!!!

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Thank you ❤️

    • @garvkhosla6488
      @garvkhosla6488 3 роки тому +1

      Build is nice but out of my budget price😂😂😂

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@garvkhosla6488 hahahaha sold my kidney's 🤣🤣🤣 jk

    • @garvkhosla6488
      @garvkhosla6488 3 роки тому +2

      @@Hobbyist16 i am also thinking so😂

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@garvkhosla6488 HAHAHA! I feel you

  • @mrzinofc
    @mrzinofc Рік тому +2

    PC dos sonhos 🥺🥺♥️

    • @Hobbyist16
      @Hobbyist16  Рік тому +1

      I believe you can have this too

    • @mrzinofc
      @mrzinofc Рік тому +2

      @@Hobbyist16 Thank you, success bro

    • @Hobbyist16
      @Hobbyist16  Рік тому

      Just got believe bro 😁

  • @mr.insanewolf5557
    @mr.insanewolf5557 3 роки тому +5

    Omg this one of the best gaming PC's I've ever seen !!!

  • @ravenztv1497
    @ravenztv1497 2 роки тому +1

    love watching while dancing at the same time lol... nice background music lol..

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      Glad you enjoyed, thank you! :)

  • @cyberconsumer5144
    @cyberconsumer5144 3 роки тому +3

    Dopest looking PC🔥🔥🔥🤯

  • @riasvsrem8580
    @riasvsrem8580 3 роки тому +1

    I wonder about the air in your case. With 3 in and 1 out. How the heat have enough line to go out of the case?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Double check it buddy :) top and back - exhaust while bottom and side are intake 😉

    • @riasvsrem8580
      @riasvsrem8580 3 роки тому +1

      Oh i see. Oki tks

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      No prob 😊

  • @zulchemical
    @zulchemical 3 роки тому +8

    the way you feel the gpu. I feel you bro.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +3

      Hahaha, ikr 😁 exactly! That's my older cousin holding the GPU, they arrived late to help me build the system.

  • @life.g.t.8469
    @life.g.t.8469 3 роки тому +1

    LOVE this type type of videos & setup

  • @diljaansingh3802
    @diljaansingh3802 3 роки тому +5

    I think that i want this for my online classes 😂😂😂

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Go for it! Hahaha

    • @florian_pld7734
      @florian_pld7734 2 роки тому

      I have it with 2 Monitors and an rycen 9 5900x and an 3090 ti and an Lian li case with Uni Fans and corsair vengence rgb pro and with Lian li aio

  • @jpotter
    @jpotter 3 роки тому +1

    sir, how did you wire the sl120 fan hub & strimer hub to the motherboard. Im helping a friend diagnose his pc. Same motherboard, same fans & rgb extension cables. Hoping for some guidance Thanks and more power!

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Hello, I have connected all SL120 fans into one hub, so the fans it group as four and connect it to argb slot. Then I used the hub for the strimer plus, it did not connect the stimer plus to argb slot since I prefer the default effects from the hub. You should use the argb splitter.

  • @stevengamingyt781
    @stevengamingyt781 3 роки тому +3

    I love watching things that I can't afford

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      You can bro, someday 😉

    • @stevengamingyt781
      @stevengamingyt781 3 роки тому +1

      @@Hobbyist16 thanks bro for ur blessings🤧☺️❤️

  • @Kaijiro____93
    @Kaijiro____93 3 роки тому +1

    Wondering if I could do same AIO setup push pull with NZXT Z73 Fans and QL120? Was the AIO/Fans sat quite tight on CPU ATX cable?? I’m on Intel, how much slack is on the ATX cable for AIO to be fitted like that?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Yea you could as long as you have enough clearance on top. Well mine stays quiet and low temps. Bottom fan from the tad sits at the cable a little.

    • @Kaijiro____93
      @Kaijiro____93 3 роки тому +1

      @@Hobbyist16 i had opposite set up as I was building with no gpu. Had side in push pull intake but recently found a video top exhaust is better for cpu with approx 6 deg cooler. Going to give it a try tomorrow and try to add additional nzxt fan.
      Whats the total thickness between two fans + aio rad?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@Kaijiro____93 wow nice! Good luck. Yea top exhaust is better. Hmm i think 1.5 inch?

  • @rknine7998
    @rknine7998 3 роки тому +4

    That is hot. It's recommended next time to use *gloves* when you're compiling a computer.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you :) hmm good idea 💡 will look into it.

  • @TheJHC7
    @TheJHC7 3 роки тому

    Excuse me for being lost, but how do you got this led stripe at the front?:) The normal razor edition comes with an additional logo on the front and led on the left... Crazy Setup 👍🏻

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Thank you! The case is lian li o11dxl , it already come with it. As far as I know razer version should also have this and underneath the case.

    • @TheJHC7
      @TheJHC7 3 роки тому +1

      @@Hobbyist16 Meanwhile I already recognized that this case is an rog edition:D But thank you for your answer:)

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@TheJHC7 No problem! keep safe.

  • @manubra5853
    @manubra5853 3 роки тому +5

    Awwww man.. u left the barcode stickers on you’re RAM!

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Just noticed that too after opening the box 🤣

  • @luckychannrl667
    @luckychannrl667 3 роки тому +1

    thanks brother because my parents allowed me to built gaming CPU
    . this is very helpful

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      No problem 👍😊 ❤️

  • @tessblancorn5890
    @tessblancorn5890 3 роки тому +3

    Amazing🤗❤🙏

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Thank you po ninang ❤️

  • @johnangelodelacruz6431
    @johnangelodelacruz6431 3 роки тому +1

    Just a question man. Since X570 MASTER dont have HDMI where did you connect ur display output/hdmi? Nice build though.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      I connect it to the display port of my RX 6800 XT
      Thanks man! ❤️

    • @johnangelodelacruz6431
      @johnangelodelacruz6431 3 роки тому +1

      Thanks man much appreciated. Im planning to make same build as yours. Thanks for this.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@johnangelodelacruz6431 Good luck bro! Have fun building.

    • @johnangelodelacruz6431
      @johnangelodelacruz6431 3 роки тому +1

      My problem is that im more on multiple monitor display and this x570 does not have and video port built in. Any suggestion for other motherboard mate?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@johnangelodelacruz6431 i do use a secondary touch screen monitor, if you are building a gaming pc. You should grab a dedicated videocard. That way you would be able to get 1-4 display/hdmi port for your display.

  • @mrjugnu3843
    @mrjugnu3843 3 роки тому +7

    My Dream Pc ❣❣Inshallah Coming Soon

  • @Vaxif16
    @Vaxif16 3 роки тому +2

    Nice video! I’m building in the same case with uni fans but my back fan doesn’t fit properly. At the cut out is a small lip that interfears with the fan. Did you experience the same?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Nice! Congrats bro! I didn't encounter any problems with the case.

  • @AndreiChrisso
    @AndreiChrisso 3 роки тому +4

    i don't like Ryzen 😬

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      🤣 well there's nothing I can do 😁 and need to say ❤️✌🏻

    • @gameland8162
      @gameland8162 3 роки тому +2

      I had Ryzen and it caused me a lot of problems, now I understand and am very happy with the current system

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@gameland8162 didn't encounter any problems with all the builds that I did so far.

  • @MFarid92
    @MFarid92 3 роки тому +1

    that is super clean setup. Thanks dude!!

  • @kimpdavid
    @kimpdavid 3 роки тому +1

    Hello, do you happen to notice in a sl120 fans when led set to white there is like pinkish tinge?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Uhm I didn't. Because atm this is my current lights facebook.com/Hobbyist16/videos/298532965181473/

  • @RedactedAccount
    @RedactedAccount 3 роки тому +2

    Hey dude, Nice Pc, a question why did you add 4 memory Ram sticks if this aorus Motherboard supports only dual channel?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +2

      My ram kit is a quad stick. It is proven that using four sticks of ram with samw frequency and capacity gives you more fps. Check it out with gamersnexus, hardware unboxed. Linus. Bitwit. Jay2centz pauls hardware techsource and etc.
      Thank you! ❤️

  • @lolzy5946
    @lolzy5946 2 роки тому +1

    How did you get that front led light working on the case???

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      there's a argb cable for it.

  • @Shatterstar4
    @Shatterstar4 3 роки тому +1

    Hi, great construction. I have the same configuration with the same fans, the only thing is that I can't synchronize the fan colours! Can you tell me how you plugged them in?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      I used the fan hub that comes with the lian li, it's plugged in to one of the argb slot in the mobo. if you are referring to the peripherals rgb. I only used the same color effect in their own rgb software

    • @Shatterstar4
      @Shatterstar4 3 роки тому +1

      @@Hobbyist16 I have 2 hubs for the 9 fans and I also have the hub for the Lian Li Strimer Plus cables.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@Shatterstar4 same thing. I have 13 fans including aio fans, and strimer plus

    • @Shatterstar4
      @Shatterstar4 3 роки тому +1

      @@Hobbyist16 So I have the fans on the AIO, and the one on the back (which is alone) plugged into the HUB. And then the fans on the bottom and the ones on the side are connected to the second HUB. Do you also have a fan?
      Did you set the fans to PWM mode?
      What software do you have? I have L-CONNECT. Thanks for your answers.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@Shatterstar4 using the L- connect. I leave everything as default they're super quiet even in heavy load. I only used 1 hub for all fans

  • @altencionhanguine6152
    @altencionhanguine6152 3 роки тому +1

    I love watching things i can't afford or maybe one day...nice build👍👍🏾

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Someday bro, someday 😉 ❤️

  • @ahmadsholi7863
    @ahmadsholi7863 3 роки тому +1

    How much is the price of the device with the secren, keyboard and mouse? What type of keyboard, mouse, and secren?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      System unit with monitor cost $4500 already. With the peripherals it will be around + $900 by the time of purchase.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      -- Peripherals --
      Keyboard: Razer Blackwidow Chroma v2
      Mouse: Razer Mamba Tournament Edition
      Mouse Mat: Razer Firefly Hard
      Headset: Razer Man O' War Wireless
      Headset Stand: Razer Base Station Chroma
      Keypad: Razer Orbweaver Chroma

  • @A.Sostan
    @A.Sostan 3 роки тому +2

    Dayummm. U pretty much have the exact setup I was looking to build. Haven’t decided on the graphics card yet. Don’t know if I want the Radeon 6900 or GeForce 3080 or 3090.. it everything else is practically the same. Even have the same Ram, m.2s and Mobo!! How do u like your build? What would U change if you had to do it over or would it stay the same?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      It's fantastic and definitely met my expectation, It would be the same

    • @A.Sostan
      @A.Sostan 3 роки тому

      @@Hobbyist16 will do man thanks for the response!! Much appreciated

    • @ItsMeSpiro5
      @ItsMeSpiro5 3 роки тому +1

      ur insane if u get anything other than the 3080 or 3090

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@ItsMeSpiro5 maybe if you get a gpu today with the over price 😁

    • @A.Sostan
      @A.Sostan 3 роки тому +1

      @@ItsMeSpiro5 yea I got the 3090!

  • @Saso_Dallas
    @Saso_Dallas 3 роки тому +1

    Very nice! How did you get all the RGB working. I’m struggling to get them all on at once.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you, I used the same rgb effects to all of them 😁

  • @kanzler_2199
    @kanzler_2199 2 роки тому +1

    This CPU doesn't have Blu-ray conection and internal card reader but can I find a modern CPU well ventilated?

  • @Ryan-re1rs
    @Ryan-re1rs 3 роки тому +1

    I did this build. But regular o11x, 3080 gaming x trio, Seasonic 850. 2 1tb 970 Evo ssd and 3 custom 8 pin wires. Came out to like 3,300.

  • @JCGGPro
    @JCGGPro 3 роки тому +2

    What is the name, metric, specifications for the top 12 screws to attache the whole Push/pull config?? I have this problem with my Lian Li. My top cover does not close because i had to use radiator screws (with huge head). Please tell me if you can, the name of these screws flat headed you used to be able to close the top cover

    • @Hobbyist16
      @Hobbyist16  3 роки тому +2

      I mailed Lian Li last Dec. 7, 2020 regarding on the specs. They only respond with this "6#32 30mm screw." So what I did is to go to my nearest Bolts store "King Bolt" located here in PH where they make different kinds of bolt, length and size until I found same size but different length. I cut mine with the same length of the screws that come with the lian li aio. I've also tried the M3x screws.
      Good luck mate!

  • @_.Envy_
    @_.Envy_ 3 роки тому +1

    I have a question regarding the fan setup for these. I am really interested in buying the same three fan pack in your video. I would like to place two fans as intake in the front, and ONE IN THE BACK AS EXHAUST. Would that be possible as it only looks like there is one cable for the PWM and RGB to connect to the hub. Also, did you have to buy any additional cables to make this work out or was everything needed already in the included box? A response back would be greatly appreciated!

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      You can. The 3 pack of Lian Li SL120 comes with 1 hub and 3 cables for pwm and argb for 3 fans. Everything you need is included. You can double check it here: lian-li.com/product/uni-fan-sl/ middle part of the page :)
      Good luck! 😁

    • @_.Envy_
      @_.Envy_ 3 роки тому +1

      @@Hobbyist16 Thank you so much! I’ve been wanting to add RGB fans to my case for awhile but the idea of needing so many fan splitters, etc. kinda set me off from being interested until I found these fans. These are quite perfect for me since they have a minimalistic RGB style which is exactly what I need as well as the convenience of having as few cables as possible as I only have two system fan headers so this certainly will help a ton.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@_.Envy_ no prob, good luck with it! 😁

  • @kelvinvanmaas4661
    @kelvinvanmaas4661 3 роки тому +1

    but if you have your radiator on top, you have your top fans as outtake? isnt that bad for ur watercooler to use that as outtake fans? bc as far as i can see you have bottom intake. back intake. behind outtake and top outtake but top is ur radiator??

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      It's the chimney method, and best fan settings for air flow on thid case. Fan settings are
      Back as exhaust
      Top as exhaust - push pull aio
      Side as intake
      Bottom as intake

  • @devil-hunterz8816
    @devil-hunterz8816 3 роки тому +1

    I love your build but how did you controlling rgb on gskill ram with aorus motherboard ? What is the software that you use to sync it. I want to build my pc with black and white theme but the only component that i can't sync the rgb is my gskill ram

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Thanks 😊, I am using the RGB fusion from aorus. It can detect my gskill ram.

    • @devil-hunterz8816
      @devil-hunterz8816 3 роки тому +1

      @@Hobbyist16 ok thank you. After i post that comment. I try uninstall all rgb software and restart my pc then i only install gskill rgb software and it works :)

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Nice. Grats bro

    • @devil-hunterz8816
      @devil-hunterz8816 3 роки тому +1

      @@Hobbyist16 thank you bro. Finally my rgb fusion can detect my ram and sync. After almost 5 hours i try to solve this problem. Thanks to youtube and notes from gskill.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Ayyee! 🔥 Happy gaming 🤙🏻

  • @VaanSin187
    @VaanSin187 3 роки тому +1

    Very nice build. The chipset-temps while playing games on this x570 board would be interesting.

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Thank you! they stay low to normal temp. :)

    • @VaanSin187
      @VaanSin187 3 роки тому +1

      @@Hobbyist16 Thank you and have a lot of fun with this beauty :)

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      I am! Cheers!

  • @warriorgaming8557
    @warriorgaming8557 3 роки тому +1

    OK I wanna ask a question that does rog Thor 1200 w or corsair rm 1000 have 3 pcie pins for graphics card because I am going with rog rtx 3090 which requires 3 pin pcie plz reply

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      They should.

    • @warriorgaming8557
      @warriorgaming8557 3 роки тому +1

      @@Hobbyist16 Are you confirmed

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      ​@@warriorgaming8557 You can double check it by yourself if you have doubts with my answer.... It's easy....

  • @sebastiansiwik5228
    @sebastiansiwik5228 3 роки тому +2

    For future reference you should always install a GPU while the case is laying down so you don't bend the PCIE pins inside the board or on the card, otherwise we got identical builds except i got the 5950x and the 3090 and I got solid red PSU cables and RAM, not much of an RGB guy :)

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      No worries I have done a lot of pc build because of my work :) nice monster build buddy.

  • @ofirperetz2735
    @ofirperetz2735 3 роки тому +1

    Where did you get this GPU Holder ? or you made it yourself? 11:30

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      It comes with the lian li o11dxl case

    • @ofirperetz2735
      @ofirperetz2735 3 роки тому +1

      ​@@Hobbyist16 will I be damned , how i did not pay attention. thanks!

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@ofirperetz2735 you're welcome ☺️

  • @usmanhaider4165
    @usmanhaider4165 3 роки тому +1

    What will be total cost required for built this owexom gaming system ? Just for pc

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      $4000 without monitor
      With monitor $4500

    • @usmanhaider4165
      @usmanhaider4165 3 роки тому +1

      @@Hobbyist16 thanks. ❤️

  • @jqChen-ig5xk
    @jqChen-ig5xk 3 роки тому +1

    Which country developed AORUS?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Aorus is a registered sub-brand trademark of Gigabyte belonging to Aorus Pte. Ltd., which is a company registered in Singapore. Aorus specializes in gaming related products such as motherboards, graphics cards, notebooks, mice, keyboards, SSDs, headsets, cases and CPU coolers.
      en.wikipedia.org/wiki/Gigabyte_Technology#:~:text=Aorus%20is%20a%20registered%20sub,headsets%2C%20cases%20and%20CPU%20coolers.

    • @jqChen-ig5xk
      @jqChen-ig5xk 3 роки тому +1

      @@Hobbyist16 oh from this link.is it from Taiwan?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@jqChen-ig5xk Gigabyte is from Taiwan. so mostly it's the same since Aorus is gaming brand of Gigabyte.

    • @jqChen-ig5xk
      @jqChen-ig5xk 3 роки тому +1

      @@Hobbyist16 wow. thank u~

  • @gabrielyohe
    @gabrielyohe 3 роки тому +1

    Amigo como unes todo los componentes de lian Li tengo las tiras mas los ventiladores como hago que todo funcione con los mismo colores

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Hmm since I am using the factory light effect, I only set them up in the same color, while the fans is on argb software control

  • @luizpauloboscariol1942
    @luizpauloboscariol1942 3 роки тому +1

    Nice job! Did you plug all of the rgbs into the unihub? How did you manage to make all of this rgb work? I`m planning to build my first PC (which is identical to yours, but white) and I am struggling to manage all the rgb connections. Thanks bro!

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Thank you! I used it's respective controller hub.I only use the same effect on trashy rgb fusion, L-connect and razer synapse. But there's a way that you can properly sync em all. Kindly look up razer rgb chroma hub. I think it allows you to sync all your rgb stuff and use one software, please double check. I opt out to it coz I am using different lightning shows now specially with L-connect and razer synapse, it's so responsive unlike rgb fusion.

    • @luizpauloboscariol1942
      @luizpauloboscariol1942 3 роки тому +1

      @@Hobbyist16 Interesting, thats good to know! Well thanks, man! Regards from Brazil! =D

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@luizpauloboscariol1942 No problem bro! Happy gaming!

  • @hamster1zombie170
    @hamster1zombie170 3 роки тому +1

    Bravo on a great build mate. ✅
    I wish tho that cases designers would line up the 24 pin directly with the cable management gromit. It's literally a a few ml -- that's it! lol it's the little things right

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Thank you!
      I agree on that.

  • @TsinghuaWu
    @TsinghuaWu 3 роки тому +1

    how did you route your eps cables? through the middle rubber grommet?

  • @wartallearth7797
    @wartallearth7797 2 роки тому +1

    I just found this and we have most of the same parts except I have a aorus gigabyte rtx 3080 ti 12gb.
    Awesome build, looks gorgeous

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      Thank you. Must be gorgeous too

  • @simohamedennasri6489
    @simohamedennasri6489 2 роки тому +1

    Sory, where the power suplay? Thank you.

  • @tamrinsharek5640
    @tamrinsharek5640 3 роки тому +1

    Badly need to build a PC for my engineering... So u can help me by telling the specification of each and every part on this PC.. Tnx

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      It's in the description and video. Anyways here it is.
      -- Specification --
      Processor: AMD Ryzen 9 5900x
      Motherboard: Aorus X570 Master
      Graphics Card: Aorus RX 6800 XT Master
      Storage: Aorus Gen4 SSD 1TB m.2
      Memory: G.Skill Trident Z Neo 3600Mhz CL16
      Power Supply: Seasonic Prime PX-1000 Platinum
      CPU Cooler: Lian Li Galahad 360 AIO Black
      Chasis: Lian Li PC-O11 Dynamic XL ROG Black
      Chasis Fan: Lian Li Uni Fan SL120 Black
      Cable Mod: Lian Li Strimer Plus 24, 8 Pin V2
      Monitor: Gigabyte G34WQC Gaming Monitor
      -- Old Hardware --
      x2 2TB Western Digital HDD
      x2 240GB Adata SSD
      -- Peripherals --
      Keyboard: Razer Blackwidow Chroma v2
      Mouse: Razer Mamba Tournament Edition
      Mouse Mat: Razer Firefly Hard
      Headset: Razer Man O' War Wireless
      Headset Stand: Razer Base Station Chroma
      Keypad: Razer Orbweaver Chroma

  • @wilsonsin5589
    @wilsonsin5589 3 роки тому +1

    may i know what is the item 11:35 ?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      It's the GB-001 from lian li, here's a link lian-li.com/product/gb-001/ it comes with the lian li o11dxl

  • @andrepinto2602
    @andrepinto2602 2 роки тому +1

    0 fans giving air inside? theres 9 goin out ?

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      Bottom intake
      Side intake
      Back exhaust
      Top exhaust

  • @mrmcbuilder9923
    @mrmcbuilder9923 3 роки тому +2

    In this case can we vertically stand the gpu?

  • @A.Sostan
    @A.Sostan 2 роки тому

    Another question. When you connect all six fans to the radiator, how do u connect it to the top of the xl case when there aren’t anymore screw holes left because they are taken up by the fans being screwed into the Rad

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      There should be an screw holes for each side. screw the fans into the rad

    • @A.Sostan
      @A.Sostan 2 роки тому +1

      @@Hobbyist16 did u find it difficult to align the top fans on the radiator with the holes on the top of the case with the cpu 8 pin power cables sticking out so much? I have the cable extensions by asiahorse and they stick out so much so that it’s hard to get the radiator far enough back for the holes so that I’m able to screw them in.

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      Mine fits very well not fitting issues.

  • @Rock10D
    @Rock10D 2 роки тому +1

    did you have to use 2 controllers for the fans?

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      One controller only

    • @Rock10D
      @Rock10D 2 роки тому +1

      @@Hobbyist16 how did you like 5 groups to 1 controller? i have top, bottom, and side, plus aio...but would like to have 1 extra exhaust on the back.

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      I have my aio directly to the mobo. So I can adjust separately. If that would be your plan. Not sure if if you need a splitter or use two controllers. Better email lian li if having splitter on controller is safe. They respond to mails quick

  • @jeansweets9259
    @jeansweets9259 3 роки тому +1

    Did you use the hdmi cacle that the gigabyte monitor came with?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      I am using the display port cable

    • @jeansweets9259
      @jeansweets9259 3 роки тому +1

      @@Hobbyist16 Ah I see. Nice setup and build by the way.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      @@jeansweets9259 thank you! 😁❤️

  • @mohammedr1338
    @mohammedr1338 3 роки тому +2

    It has become very beautiful, brother. I have been wanting to buy such a thing for a long time but it is not for money. I got a little peace of mind after watching your video

  • @k1rqn886
    @k1rqn886 3 роки тому +1

    Hi, I've got a question.
    Which fans are intake and exhaust? I'm kinda new to pc building.

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Intake side and bottom
      Exhaust back and top

  • @adxo9459
    @adxo9459 3 роки тому +1

    I want to upgrade my pc but i have 2 choices 5900x or i9 11900k. I dunno which is better

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      In my own opinion, It's r9 5900x. You have the capabilities of overclocking with easy steps. I think new intel cpu doesn't allow oc. Do not quote me on that and please do double check the info.
      They are quite similar in performance depends on the game that you play. For me, 5900x is better been using mine for gaming and some video editing practice. Also You'll have more options for your motherboard etc.

  • @siddharthanihalani622
    @siddharthanihalani622 3 роки тому +1

    Is RGB fusion able to control the RGB on the the Lian Li fans?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Yes bro, you just need to plug argb pin from the controller to mobo

  • @RealAsifKhan1
    @RealAsifKhan1 3 роки тому +1

    Hey. Hope you doing good . I liked this build and Which CPU case is that?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      Doing great, thanks for asking. 😁 it's the Lian Li PC-O11 Dynamic XL

  • @BelligerentChimp
    @BelligerentChimp 3 роки тому +1

    Very cool build!
    Are you using rgb fusion 2.0 to control the lighting ?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      Yes, razer synapse. Rgb fusion and lian l connect. Most of the time I am only using the rgb fusion.

    • @CarlosRivera-ww6vi
      @CarlosRivera-ww6vi 2 роки тому +1

      @@Hobbyist16 razer synapse working with lian li fans?

    • @Hobbyist16
      @Hobbyist16  2 роки тому +1

      If you use the razer rgb hub it will., Im sure.

  • @charlielin6120
    @charlielin6120 3 роки тому +1

    where did you get the gpu sag bracket , thinking of getting that motherboard too so that sag bracket may come in handy

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      it comes with my pc case lian li o11d xl

  • @khaledfahad9572
    @khaledfahad9572 3 роки тому +1

    😅🙏 If you don't mind me asking i just bought a ryzen 5900x cpu and I'm wondering what motherboard I'll be Pairing it with do you recommend the master? Have you had any problems with it?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      I would definitely recommend the aorus x570 master my first mobo was the x570 pro wifi but later on change with the master and didn't regret that decision
      It performs very well and had no issues since day one. I am using the latest bios btw.

    • @khaledfahad9572
      @khaledfahad9572 3 роки тому +2

      Thank you so much for your time to reply to my message your awesome 😁

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      @@khaledfahad9572 no problem buddy! Have fun and good luck on your build

  • @PCG2022
    @PCG2022 2 роки тому +1

    What happens if the inlet outlet is on top of the cpu rather than the side? Will this cause a issue?

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      You'll get hotter temp. If I understand your comment right.

    • @PCG2022
      @PCG2022 2 роки тому +1

      @@Hobbyist16 looks like taking it off an resiting with new paste which is the one thing I didn't want to have to do 😥 First build & its a i9 12900k which run hot anyway 😢 Thanks for reply. 👍

    • @Hobbyist16
      @Hobbyist16  2 роки тому

      No problem bro,. Good luck 😁

  • @sasuke19831
    @sasuke19831 3 роки тому +1

    Are you controller all the lights through software or controller....?

    • @Hobbyist16
      @Hobbyist16  3 роки тому

      I am controlling lian li and aorus by rgb fusion and the razer stuff to razer synapse.

  • @kevinnguyen4567
    @kevinnguyen4567 3 роки тому +1

    What kind of GPU bracket are you using in this video ?

    • @Hobbyist16
      @Hobbyist16  3 роки тому +1

      It's the GB-001 from lian li, here's a link lian-li.com/product/gb-001/ it comes with the lian li o11dxl