I own a video game store. As soon as I saw this, I checked my defective games and found several, very nice game boy color titles with the same issue. I was able to easily re-flow the chips and got them running! Thank you for this video for a great perspective on what to look for on defective games.
This is amazing, thank you so much. I've had some parts of my Gameboy collection stop working out of nowhere and I had no idea how to fix it. After seeing your video I grabbed one down and sure enough it had a wobbly connection on that same chip. Two seconds later and the game is up and running for the first time in years. This is definitely important information for gameboy game preservation reasons.
8:55 holy crap those sounds. My dad bought a original gameboy back in 1991 to keep all of us 6 kids and step kids entertained on the flight from Oregon USA to London. I was the only one who cared so I played that game for like 10 hours. Such memories flooding back in.
the design of gameboy carts means that repeateded removal from the system flexs the pcb making the chip legs cracking free from their pads an extremely common occurance. it's sad to think the amount of GB carts that have been binned because of what was likely an easy fix.
@UnjustifiedRecs it's not a case of being necesserily rough handed it's just repeated use, it only needs the little pinch of the thumb against the cart to slide it out each time repeated say 100 times or less if the solder is already subpar for it to crack away. the same applies to sega megadrive carts having their traces worn away where the plastic shell edge pinches the board when it's removed or the controller port of the sega megadrive cracking loose from the plug being inserted and removed so often.
Thanks Sparks, yeah that makes sense. I just thought it strange that it was always in the same position, but you're probably right it must be something to do with insertion/removal... because they obviously all worked when they left the factory 🤷
Definitly the way the cartridges have been handled through the life. Lets not forget that being a portable console the cartridges don't just live at home, they are being bashed around in back packs and pockets too. Very little solder on the chip legs, lots of impact and vibration and you have the failure. Note that the broken solder is also towards the center of the PCB too, where the most flexing will happen if you sat on it for example.
@@NationOfMasturbation well it was more unavoidable design, most items are made with an understanding of cycles of use, these items still work after decades of use and abuse and are only just starting to show their age because of these design issues.
Wow, so many with the identical fault. Excellent video BUT not quite as excellent as that fine tee 🤣 You have never looked so good...Cheers for purchasing one Steve 👍👍👍👍
😁 no probs, love the tee it looks awesome! Yeah, I really enjoyed working on these games and I'm tempted to buy a few more but I don't want the faults to all be the same! 😬
Here's my guess for the repeated pin solder failure. The pad at the corner has 2 heavy traces leading from it, leading to a flooded area (possibly Vcc). Because of this additional thermal bridging, you are more likely to get poor soldering at this pad. If that mounting hole diagonally above C2 attaches to the cart case, you also have a nearby source of mechanical stress. Over time and use, I can see these two things leading to a potential failure at that one point.
That does look like the design basically has a large(relatively speaking) heat sink next to those pins. The fix is pretty easy(longer soak time in the oven before reflow to get the board more evenly heated), but it's hard to see how they would have known there was a problem in the first place to do anything, especially if they're using class 2 standards.
since all transparent ones are affected and its the top/top3 pins that are affected, could it be that the solder degraded faster with uv light (sun exposure for example)?
UV light has almost no effect on metal, or at least I don't recall any metals that degrade from it, so I can't see the radiation being a factor. However, if that particular section of the board was exposed to more light, it could have been exposed to more heat, which could have caused some expansion and retraction of the metal in those joints that sped up the breaking of them.
I can't get enough of your videos - After watching maybe 50 of your videos and having zero knowledge in electronics I feel like I'm learning a new skill haha having never worked on a circuit board in my life! Ah the joys of the internet.
It's amazing that after almost three decades, you may be the first person to find this fault in GB cartridges. Or, at the very least, the first to document it. In 4K, no less.
More likely that more people know about it , but kept it to themselves to make money off of this obtaining defect games and fixing them , quality control with that manufacturer was open to a lot of improvement.
Brilliant my friend. It is always a pleasure to watch your videos. You have been doing great work and every post is better and better. Great Job Steven...amazing.
Yep, the black cartridges like Toy Story 2, Bugs Bunny Operation Carrots and Tetris DX (and the not physically black Pokémon Gold and Silver) display the Game Boy Color's 56 on-screen colours on a GBC or GBA, but are programmed within the original Game Boy platform's CPU/RAM/VRAM limitations (or disable features to run on it, like Tetris DX disabling animated backgrounds). There are a couple of originally original Game Boy games that got GBC re-releases on black cartridges - Zelda Link's Awakening DX and Wario Land 2. There's also a GBC game I know of that's a clear cartridge "GBC-only" one, but is actually a colourised re-release of an original Game Boy game that helpfully makes no mention of that on its packaging or error screen - Tom & Jerry.
This has to be one of the best video's I've seen in a while! Your excitement with each repair made my day! I couldn't click the Subscription button fast enough! Thanks Stez!
I had five gameboy games I got on eBay untested and a couple of them had the same problem with the legs of the chip and It works great. I like learning stuff from Steve!! Keep up the great work!!! 👍👍👍
That's crazy! I have my childhood copy of Toy Story 2 (GBC) that one day just stopped playing. Same thing happened with my copy of Yoda Stories. If I had soldering skills I would check those pins.
I bet that one spot is where the board flexes a tiny bit in the case as you pull out the cartridge. Eventually it pops that one pin and maybe a few more down the row.
I can't believe that one cart didn't work with the sellotape, that looked like a good fix to me. Lovely fix on that too. The others to all have the same issue was so strange, but great and nice easy fix across them all.
Great video - love this topic about fixing stuff. What did you use to protect your wires on the cracked cartridge? Some kind of UV light hardening plastic?
minute warping in the PCB is making the chip pop,.. I think all broken GB games online have this problem. They get put in a basement and cool and warm and cool and warm, + humidity and drying,.. it's sad that people prolly threw away their favorite games for no reason
So easy for you now, after the first 2 I didn't think the rest would be the same but wow couldn't believe that. I wish I knew about that easy fix back in the day when my cartridges packed in, would've saved me a small fortune. As meatloaf said you fixed them like a bat out of hell. 👍
I've never thought that you can actually fix old school video game cartridges! I always thought (for some weird reason) that once they're broken, it's over.
I wonder how many of these cartridges are out there with this same fault. Steve, buy more of these and fix them. I remember playing super mario land when I had my GameBoy. I had Tetris, tennis, super mario land 2. Wish I still had them. I do have a Game boy actually three of them but different games. Also the Gameboy camera and printer.
Had two Pokemon Games that randomly started to not work first thought I destroyed something modding in a Battery Socket for the Save Functionality, saw this Video and had the exact same loose Leg on the exact same position and chip, resoldered them and now my childhood games work perfectly again. Thank you~
You should solder the whole width of the ground plane at 7:39, because it's the only mechanical reinforcement keeping the crack together when pulling the module out of the slot. And I think the module having been stuck too hard in an GBA is the reason for the PCB to crack at first. That UV epoxy doesn't have strong cohesion.
You're probably correct, but it's also almost certain that - at this time in their lives - these carts will not have to fear e.g. rambunctious 8-year-olds.
@@MJFallout You probably also are correct with this. Additionally you should not forget, that half the fun for many of us retro nerds is about preserving the old treasures for the future :)
@@elmariachi5133 yes! This. I have a Pokémon silver cart that can’t hold a save but you can still play the game. I’m disappointed I can’t save progress but def good for hanging onto for my kids to enjoy
Last week I bought 3 gameboy color games and they had the exact same issue! Well, one of them was working but sometimes it didn't, so I reflowed it anyway. Because of your video I could spot the problem immediately. Thank you!
11:15 Tootuff (Titeuf in French) is a French comic strip about a naive kid with a single lock of blonde hair doing nonsense with his friends. The comic strip had been then adapted into a TV show. Very popular in France back in the early 2000's.
Steve that was very interesting and probably caused over time by being stretched and bending at this particular point on the board by the numerous actions of inserting and removing the cartridge. In respect to Meat Loaf RIP, I think the singing was great. Dave looks quite puzzled though and did not know what to make out of it. 🤣
*over time. Two words, not one. But anyway, the causation of the issue is likely due to pressure on that part due to it's location. Handling the game may cause an incentive to squeeze it a bit there and the usage of it and pressure when inserted into the gameboy and removal etc would also increase pressure loads there
@@___Zack___ Thank you for pointing out and that was just a typo and being careless. I sincerely apologise for not being so pedantic. It is so annoying and I have corrected it to stop the world from complaining. Yes your explanation on the bending and flexing issue is excellent. Find another fault LOL.
As entertaining as it is, it's hard to think of a less valuable use of time than fixing a cracked Super Mario Land cart. Maybe fixing a cracked Tetris cart.
So, the reason for the whole "ebay lying" thing, is that, many people will try anything in their power to get out of paying a seller, stealing parts off something and then returning it for full refunds and the seller just can't do shit about it. So, if you say it's defective, when you have no idea, the buyer really can't pull any bullshit at that point.
I’m so envious of your skills. Took me ages to mod a Nintendo rumble pak to remove the need for batteries as so tiny and youve got all the gear too. You could make some money off this. Buy up all the ‘broken’ carts. Then fix then and sell them again. Keep them going too. Just subscribed too as I find your videos interesting. Keep it up 👍🏻
This was my first time watching your content. Shit was mad interesting and funny. I subscribed big dawg, now I’m about to binge on your videos. Stay up homie.
Thanks Travis! I know, I genuinely thought a couple of these would just need a clean. Turns out they must all be susceptible to the dreaded leg liftage!
This is why I want to get into soldering. I am tossed an old nes game into the trash once because I saw the board had a break like this, and watching you repair it so simply makes me really kick myself.
Man that was awesome! I got secondhand excitement every time you fixed one 😆. I HAVE to know, what were those toothpaste-like substances you used on the pins and the cracked card?? Not the solder but the green stuff you put under the thermal light and the other goopy stuff you used before applying solder?
I'm not the uploader, but if my experience in PCB manufacturing is to be believed, the green goop was solder mask...basically a liquid that hardens up under UV light, usually serving the purpose of protecting the board layers under the mask from damage and corrosion. The other goop, the one put on before the reflowing, should be flux, which effectively cleans the metal of any oxidation/corrosion so that the solder can actually adhere to it during reflow.
@@IHateUA-camHandles615 i don't think it matters. Personally i use mg chemicals flux because it's decent and easily available. I don't think it matters what brand or type, flux is flux. You can get it in a goop in a jar, in a pen style if you're lazy like me or in a syringe. It's helpful for very small solder joints or if you are a perfectionist. I dont use it much, mostly for stuff like the solder pads on usb connectors making my own cables.
Had a couple faulty gameboy games that I hadn't bothered to look at, watched your video and it was the same issue. Both now working, much appreciated!
Thanks Jaysj! Awesome news. Glad it helped and glad you could get your games working! 👍
A cracked board to? How strange :)
I've got one game myself I have kept 20 years and its never worked so I wonder if it has the same issue
I'll try that too!
Seems like an intentional design flaw
I own a video game store. As soon as I saw this, I checked my defective games and found several, very nice game boy color titles with the same issue. I was able to easily re-flow the chips and got them running! Thank you for this video for a great perspective on what to look for on defective games.
No need to thank him, he uploads videos for money.
@@AgentHEKTAH Good for him, but the information is still appreciated.
@@AgentHEKTAH why you hating??
@@GHETTOCOWB0Y he a broke boi
@@GHETTOCOWB0Y I guess his games had a different problem. lol
This is amazing, thank you so much. I've had some parts of my Gameboy collection stop working out of nowhere and I had no idea how to fix it. After seeing your video I grabbed one down and sure enough it had a wobbly connection on that same chip. Two seconds later and the game is up and running for the first time in years. This is definitely important information for gameboy game preservation reasons.
Thanks Mupple! It has to be the most common problem with these things! I wonder how many have been trashed! So glad you got yours working again! 👍
8:55 holy crap those sounds. My dad bought a original gameboy back in 1991 to keep all of us 6 kids and step kids entertained on the flight from Oregon USA to London. I was the only one who cared so I played that game for like 10 hours. Such memories flooding back in.
I love people with the ability to fix broken things. Good work!
I am a couplecoach. Thanks for your appreciation! 🥲
It's not an abiity, it's a skill. Just clarifying :)
looking for that special doctor for all my life, havent found it yet
Wow, great video. This is fascinating. I'm searching eBay right now!
Thanks Steve. I guess it has to be a common fault with these things! 😳
I was about to say “what are you talking trying to steal tronicsfix schtick?”
the design of gameboy carts means that repeateded removal from the system flexs the pcb making the chip legs cracking free from their pads an extremely common occurance. it's sad to think the amount of GB carts that have been binned because of what was likely an easy fix.
@UnjustifiedRecs it's not a case of being necesserily rough handed it's just repeated use, it only needs the little pinch of the thumb against the cart to slide it out each time repeated say 100 times or less if the solder is already subpar for it to crack away. the same applies to sega megadrive carts having their traces worn away where the plastic shell edge pinches the board when it's removed or the controller port of the sega megadrive cracking loose from the plug being inserted and removed so often.
Thanks Sparks, yeah that makes sense. I just thought it strange that it was always in the same position, but you're probably right it must be something to do with insertion/removal... because they obviously all worked when they left the factory 🤷
Definitly the way the cartridges have been handled through the life. Lets not forget that being a portable console the cartridges don't just live at home, they are being bashed around in back packs and pockets too. Very little solder on the chip legs, lots of impact and vibration and you have the failure. Note that the broken solder is also towards the center of the PCB too, where the most flexing will happen if you sat on it for example.
Then that is horrible design
@@NationOfMasturbation well it was more unavoidable design, most items are made with an understanding of cycles of use, these items still work after decades of use and abuse and are only just starting to show their age because of these design issues.
Wow, so many with the identical fault. Excellent video BUT not quite as excellent as that fine tee 🤣 You have never looked so good...Cheers for purchasing one Steve 👍👍👍👍
😁 no probs, love the tee it looks awesome! Yeah, I really enjoyed working on these games and I'm tempted to buy a few more but I don't want the faults to all be the same! 😬
Well I guess the credit for these fixes goes to MMV... Wouldn’t have been possible without MMV being in the room...
I can’t believe the first thing you didn’t try was blowing it, looking at it confused, blowing it again ..and then moving on to the other fixes 😹
🤣 I was tempted!
There is something so refreshing about fixing electronics like that. Love it.
Here's my guess for the repeated pin solder failure. The pad at the corner has 2 heavy traces leading from it, leading to a flooded area (possibly Vcc). Because of this additional thermal bridging, you are more likely to get poor soldering at this pad. If that mounting hole diagonally above C2 attaches to the cart case, you also have a nearby source of mechanical stress. Over time and use, I can see these two things leading to a potential failure at that one point.
At last someone answered what I was thinking.
That does look like the design basically has a large(relatively speaking) heat sink next to those pins. The fix is pretty easy(longer soak time in the oven before reflow to get the board more evenly heated), but it's hard to see how they would have known there was a problem in the first place to do anything, especially if they're using class 2 standards.
since all transparent ones are affected and its the top/top3 pins that are affected, could it be that the solder degraded faster with uv light (sun exposure for example)?
UV light has almost no effect on metal, or at least I don't recall any metals that degrade from it, so I can't see the radiation being a factor. However, if that particular section of the board was exposed to more light, it could have been exposed to more heat, which could have caused some expansion and retraction of the metal in those joints that sped up the breaking of them.
@@Suraht you are probably right
I can't get enough of your videos - After watching maybe 50 of your videos and having zero knowledge in electronics I feel like I'm learning a new skill haha having never worked on a circuit board in my life! Ah the joys of the internet.
It's amazing that after almost three decades, you may be the first person to find this fault in GB cartridges. Or, at the very least, the first to document it. In 4K, no less.
More likely that more people know about it , but kept it to themselves to make money off of this obtaining defect games and fixing them , quality control with that manufacturer was open to a lot of improvement.
This is great information to have! That pin will be the first place I look next time!
If Bob Ross did electronics repair, he'd remind me of you. I love it! Awesome work repairing those games and keeping them out of landfills. :)
Got a faulty GBC game working by immediately going straight for that IC leg and fixing it. A great and simple fix for 'dead' GB cartridges! Thanks
Brilliant my friend. It is always a pleasure to watch your videos. You have been doing great work and every post is better and better. Great Job Steven...amazing.
Thanks Oz! 👍 Really appreciate that. I keep trying to improve 😬
Man it's been a minute since I got time to watch, sorry dude. Great job buddy
Cheers Phil. Good to have you back mate! 😊
The Toy Story game is Monochrome and Color, a dual mode cart (or type 2 according to Nintendo). I've seen N64 carts with similar fault.
Yep, the black cartridges like Toy Story 2, Bugs Bunny Operation Carrots and Tetris DX (and the not physically black Pokémon Gold and Silver) display the Game Boy Color's 56 on-screen colours on a GBC or GBA, but are programmed within the original Game Boy platform's CPU/RAM/VRAM limitations (or disable features to run on it, like Tetris DX disabling animated backgrounds).
There are a couple of originally original Game Boy games that got GBC re-releases on black cartridges - Zelda Link's Awakening DX and Wario Land 2.
There's also a GBC game I know of that's a clear cartridge "GBC-only" one, but is actually a colourised re-release of an original Game Boy game that helpfully makes no mention of that on its packaging or error screen - Tom & Jerry.
This is one of the most informational videos for repairing these cardridges!!! Thank you so much
Fantastic video. It’s great to see those old games get the love they deserve, and can’t believe you managed to fix the Super Mario Land cart!
It's so statisfine watch this man fixed old klassic good times, he deserve this good rare old Gameboy games, keep going rescue this good old times ^^
I am loving the videos. This channel is great content to just watch back to back. Keep it up!
Thanks Victor! Really appreciate that! 👍
This has to be one of the best video's I've seen in a while! Your excitement with each repair made my day! I couldn't click the Subscription button fast enough! Thanks Stez!
Thanks Inxayne! Much appreciated 👍
This has made me want to start soldering, looks fun.
I had five gameboy games I got on eBay untested and a couple of them had the same problem with the legs of the chip and It works great. I like learning stuff from Steve!! Keep up the great work!!! 👍👍👍
That's crazy! I have my childhood copy of Toy Story 2 (GBC) that one day just stopped playing. Same thing happened with my copy of Yoda Stories. If I had soldering skills I would check those pins.
Glad to see you actually fixing these up, and not just using a 1up card and calling it a day like that Riggs hack I've seen do. Keep it up!
I bet that one spot is where the board flexes a tiny bit in the case as you pull out the cartridge. Eventually it pops that one pin and maybe a few more down the row.
I think you might be right. It certainly makes sense.
I can't believe that one cart didn't work with the sellotape, that looked like a good fix to me. Lovely fix on that too.
The others to all have the same issue was so strange, but great and nice easy fix across them all.
😁 yep, sellotape normally works! Thanks Craig 👍
need electrical tape obviously
Great video - love this topic about fixing stuff. What did you use to protect your wires on the cracked cartridge? Some kind of UV light hardening plastic?
Yeah what is that stuff? I am also super curious!
minute warping in the PCB is making the chip pop,.. I think all broken GB games online have this problem. They get put in a basement and cool and warm and cool and warm, + humidity and drying,.. it's sad that people prolly threw away their favorite games for no reason
Fixing faulty electronics is soooooo satisfying! Great job! 👌🏻
I'm wondering if the way the cartridge flexes over its lifetime cause the lifting of that connector?
Yeah, I think you're right. I guess it's one of the most common failures on these things...
I had the same problem with 6 gameboy games. It's awesome now can play my old games.
Childhood memories activated 😂
Thank you so much ❤️
So easy for you now, after the first 2 I didn't think the rest would be the same but wow couldn't believe that. I wish I knew about that easy fix back in the day when my cartridges packed in, would've saved me a small fortune.
As meatloaf said you fixed them like a bat out of hell. 👍
😁 thanks Michael! It was surprising that the faults were all so similar!
This was so relaxing to watch. Keep up the great work. UA-cam needs some drama free relaxing videos like this!!
That's cool you can still fix the Mario Land cart. 🤔 I would have taken one look at the crack and assumed it was trash.
It's crazy but everything can be fixed, our culture has just made it easier to throw it away.
@@themonkeyhand Not everything, but most things can be fixed. And I wouldn’t blame society but rather capitalism ;)
Made me smile when you managed to fix them. So satisfying!
New to this channel, really like watching tech get repaired. Gained a new sub with this.
Thanks Jonathan, really appreciate that! 👍
I like your editing. You work efficiently while speaking, and when you're done speaking, you cut to the next relevant point. Thanks for the vid
I remember as a kid when the Gameboy games didn't work, we use to pull them out and blow into the cartridge. It's amazing how often that worked haha
I have no idea how youtube recommended this to me but I stayed for it all. Amazing job, man!
What a great catch. Cheers
Thanks WanJockey! 👍
I've never thought that you can actually fix old school video game cartridges! I always thought (for some weird reason) that once they're broken, it's over.
I wonder how many of these cartridges are out there with this same fault. Steve, buy more of these and fix them.
I remember playing super mario land when I had my GameBoy. I had Tetris, tennis, super mario land 2. Wish I still had them. I do have a Game boy actually three of them but different games. Also the Gameboy camera and printer.
Had two Pokemon Games that randomly started to not work first thought I destroyed something modding in a Battery Socket for the Save Functionality, saw this Video and had the exact same loose Leg on the exact same position and chip, resoldered them and now my childhood games work perfectly again. Thank you~
Wow, that goes to show that a lot of these 'broken' carts are probs this same reason!
Awesome video! Didn't know these games break at all. What's that stuff you're pouring on there? Flux?
Thank you! Yeah, that'll be the flux! 👍
You should solder the whole width of the ground plane at 7:39, because it's the only mechanical reinforcement keeping the crack together when pulling the module out of the slot. And I think the module having been stuck too hard in an GBA is the reason for the PCB to crack at first. That UV epoxy doesn't have strong cohesion.
You're probably correct, but it's also almost certain that - at this time in their lives - these carts will not have to fear e.g. rambunctious 8-year-olds.
@@MJFallout You probably also are correct with this. Additionally you should not forget, that half the fun for many of us retro nerds is about preserving the old treasures for the future :)
I'd go one further and solder multiple wire strips across to give it more integrity
@@elmariachi5133 yes! This. I have a Pokémon silver cart that can’t hold a save but you can still play the game. I’m disappointed I can’t save progress but def good for hanging onto for my kids to enjoy
Last week I bought 3 gameboy color games and they had the exact same issue! Well, one of them was working but sometimes it didn't, so I reflowed it anyway. Because of your video I could spot the problem immediately. Thank you!
TronicsFix sent me here
Same
Man I have so much love and appreciation for people who can fix electronics.
11:15 Tootuff (Titeuf in French) is a French comic strip about a naive kid with a single lock of blonde hair doing nonsense with his friends. The comic strip had been then adapted into a TV show. Very popular in France back in the early 2000's.
You are so talented and skilled! I'm so happy you were able to fix these games and save them from being wasted!
Steve that was very interesting and probably caused over time by being stretched and bending at this particular point on the board by the numerous actions of inserting and removing the cartridge. In respect to Meat Loaf RIP, I think the singing was great. Dave looks quite puzzled though and did not know what to make out of it. 🤣
Thanks M m! 😂 yeah Dave would probably have left by now if he wasn't in his resin prison!
*over time. Two words, not one. But anyway, the causation of the issue is likely due to pressure on that part due to it's location. Handling the game may cause an incentive to squeeze it a bit there and the usage of it and pressure when inserted into the gameboy and removal etc would also increase pressure loads there
@@___Zack___ Thank you for pointing out and that was just a typo and being careless. I sincerely apologise for not being so pedantic. It is so annoying and I have corrected it to stop the world from complaining. Yes your explanation on the bending and flexing issue is excellent. Find another fault LOL.
@@mm0077 You're welcome for the free eduction.
@@___Zack___ I like the free "EDUCTION"
My friend, I haven’t caught a video in awhile (SUPER busy at work), I’m glad to see you’re starting to blow up!
As entertaining as it is, it's hard to think of a less valuable use of time than fixing a cracked Super Mario Land cart. Maybe fixing a cracked Tetris cart.
He can send it to WATA now.
Loving the almost childish enthusiasm at 8:48, great vid!
So, the reason for the whole "ebay lying" thing, is that, many people will try anything in their power to get out of paying a seller, stealing parts off something and then returning it for full refunds and the seller just can't do shit about it. So, if you say it's defective, when you have no idea, the buyer really can't pull any bullshit at that point.
Unfortunately if you get a dodgy buyer they can still open a not as described case even when you listed the items as for parts/untested.
12:01 "It"s clearly factory"... so that's one case where you actually made it better than factory! Good job Steve.
I notice a number of scratches on your hand.....have you and Dave had a falling out?
Yeah, he took offence at me taking him off camera in the Retron 5 video. Proper little spoilt brat he is 😂
Another great vlog of your fixes there on your Gameboy Colour games Steve would be good to see some console repairs too - Nice 1 mate 👍
Thanks Chris! 👍
Sellotape!😂
Honestly can’t believe it… 🙄
…especially when EVERYONE knows gaffer tape’s the only way forward 😑☝️
This is very true. Imagine Sellotaping fireworks together. It'd never work.
@@StezStixFix
Only idiots would sellotape fireworks together 😑☝️🤔
Best thing I have found since my mate vince for fixing videos
11:12
That's a good GBA right there. The button and case colors work so nicely together.
Your happy guffaw when things work is amazing! We all feel the joy when it happens
Instant subscription from the way you do things in this video. My kinda content right here.
Thanks Thomas, much appreciated! 👍
Found myself rooting for you in the end! Very satisfying
I’m so envious of your skills. Took me ages to mod a Nintendo rumble pak to remove the need for batteries as so tiny and youve got all the gear too. You could make some money off this. Buy up all the ‘broken’ carts. Then fix then and sell them again. Keep them going too. Just subscribed too as I find your videos interesting. Keep it up 👍🏻
Great video! Never really had an interest in this kind of thing but now I wanna see more!
Unbelievable how simple most of those were, looks intimidating if you've never done it before but I think your video will inspire a lot of people!
The video I didn't know I needed to watch and it was incredible! Love your personality. You got a new sub!
Well done mate. Was satisfying to watch. The process of fixing these was a mystery to me - so it was really cool seeing your process.
This was my first time watching your content. Shit was mad interesting and funny. I subscribed big dawg, now I’m about to binge on your videos. Stay up homie.
first video I watched from you, great job of bringing them back to life!!
This is amazing! I have a ton of GBA cartridges that don't work... I'll open em up to see if I find something similar. Thanks for this!
That song was so inspiring and also thanks for the rest of the vid bud
Great strike rate Steve! Makes me want to jump on Amazon and grab the setup you have and start repairing stuff too! 👍👍
Thanks for this mate. It was a pleasure watching your work.
It was really enjoyable and satisfying to watch you repair the Super Mario Land one.
4/5 with the same issue is just crazy. great work 👍👍
I know, i was very surprised! Thanks Steve 👍
Found your channel randomly so glad i did. This is great to watch while high
Thanks for showing us that.will apply and check my dead ones too.
This video helped me finally fix my game! Thank you !!!
GET IN THERE!!! Great video Steve. What are the odds?!
Thanks Travis! I know, I genuinely thought a couple of these would just need a clean. Turns out they must all be susceptible to the dreaded leg liftage!
This was super satisfying. I'm so glad you found the common culprit. Now I need to learn to solder and buy some broken retro games.
That look when you dropped the stuff off the table, hehehe I can relate. Nice video, sir!
This was such an interesting video. Fixing old games... you are a real one.
Thoroughly satisfying video to watch. Subscribed for sure.
Wow! New to the channel and new to restoring games like this. Definitely going to stick around for more
Thanks for the video. Extremely satisfying bringing those gameboy games back to life. Subbed
Right on brother thank you for displaying your super skill I am ultra impressed!
Love this channel, thanks for all the effort in making these videos!
This is why I want to get into soldering. I am tossed an old nes game into the trash once because I saw the board had a break like this, and watching you repair it so simply makes me really kick myself.
Very enjoyable video! Thank you YT algorithm for the suggestion
Love this! Mystery! Intrigue! Excitement! Awesome stuff!
Love your videos! Keep ‘em coming!
Man that was awesome! I got secondhand excitement every time you fixed one 😆. I HAVE to know, what were those toothpaste-like substances you used on the pins and the cracked card?? Not the solder but the green stuff you put under the thermal light and the other goopy stuff you used before applying solder?
I'm not the uploader, but if my experience in PCB manufacturing is to be believed, the green goop was solder mask...basically a liquid that hardens up under UV light, usually serving the purpose of protecting the board layers under the mask from damage and corrosion. The other goop, the one put on before the reflowing, should be flux, which effectively cleans the metal of any oxidation/corrosion so that the solder can actually adhere to it during reflow.
99% sure it's flux he puts on before soldering.
@@incongruous4 But what brand? I've seen this clear flux on a few different channels but never seen it in real life.
@@IHateUA-camHandles615 i don't think it matters. Personally i use mg chemicals flux because it's decent and easily available. I don't think it matters what brand or type, flux is flux. You can get it in a goop in a jar, in a pen style if you're lazy like me or in a syringe. It's helpful for very small solder joints or if you are a perfectionist. I dont use it much, mostly for stuff like the solder pads on usb connectors making my own cables.
I came expecting to be very confused, I left understanding that a lot of gameboy games were produced faulty and can be easily fixed. Thanks man!