Angel, thank you for your video. I went for it and took a chance. I bought a $9 hard drive exact same one and I did the head change. Unfortunately, after the replacement, my HD is still doing the same thing. the disk spin and the heads flicker for 20 seconds and quits. What can I do?
This video isn't for fixing a hard drive, but rather destroying it. 2:10 At this exact moment, he completely destroys the hardrive and the heads. The heads cannot be swang across the plater while its off because when a hard drive is cllsed and spinning, it creates an airflow which keeps the heads from touching the platter, but still, its a really small distance, 10x times smaller than a human cell, so the moment the platter is damaged even the slighthest scratch, its done for.
Also, it is needed a head separating tool so the heads dont touch eachother while they get removed. As you cn see at 3:32 , the heads are touching eachother, so now they are all misaligned
Hi, I have got questions. If I swap the head using with the same model and first 3 digits, but a different firmware, will I have a problem with recover my data? If I find the same firm can I be able to recover my data??
@@chris01479 Hi. I'm not a hdd expert but I have one seagate 3TB which died a couple days ago and I'm in process to try to recover it. I already tried a new board with the same old bios chip on the new board, but no success yet. Next step is try to buy another similar disk to replace the heads. So my suggest to you is, check if the new board has the same model number (printer near the sata pins). Also, remove the old bios and put it to the new board.
Some things almost NO ONE will tell you about recovering data... because all most people will take in mind is cash! If you don't have a clean room, you can create yourself a small box sealed with a window, lights inside and a high efficiency filter, using some fans or a vacuum cleaner to create positive pressure, in the same way you put only filterer air inside. There's a lot of ways to create this box, on where you can put your disk, your tools and work with safety, preventing dust or particules to sit over the plates...
Apart from the clean room, flipping in and out the heads into the platters that way without parking them into a proper headcomb (look it up on Google), it will most likely damage them.
agreed. There are some small pieces (metallic or plastic) created to fit on these heads, preventing the heads to touch each other, also keep them in place, also a pin you lock the piece on the arm. So just after, you can remove the entire piece and making sure the small heads are just in place and in safety. These little pieces used to be called "ramp set" or headcomb as you said. I'm not sure if there's a proper name to it.
Hi, I have got questions. If I swap the head using with the same model and first 3 digits, but a different firmware, will I have a problem with recover my data? If I find the same firm can I be able to recover my data??
@@angelcomputech8613 Oh right, if I replace the head that come with the same make, same model, same gb and first 3 digits of serial number but different firmware, will it works and can i be able to access my data??
@@angelcomputech8613 If I replace the heads, can I be able to get access to my data if I use hddsuperclone to back up the data and put them onto another drive to see if I can get the data back??
@@angelcomputech8613how to get these replacement heads as I have a problem with this head too on my external hard disk. The discs have no damage just the head is clicking due to a fall from my desk accidentally.
You were very careless with the platters. I don't think this process is good. Don't follow this tutorial. Also, I don't think the heads should touch each other like that; a spacer is required last time I checked.
@@H53. Oh right, i wish you had done it as I need your help with few things I need to know before I start doing it but you haven't done it so I'm going to find someone else who has done it and can help me with it.
@@angelcomputech8613bhai yeh replacement heads kahan say milaingay ? Yehi problem hai mera kuch bent hain disc is clean. It gets stuck in that parking slot
You can only do it if you build a small clean sir enclosure chamber, but the only problem is that you need the tools to get your data back which it will cost $10k so it I'd not worth it.
This guy does not know a thing on what he's doing. Only attempt if you want to destroy the data on the drive because you will surely destroy it if you did what this guy did. 1) Doubt he's doing this in a clean environment considering the issue in #2. 2) Not wearing any gloves (he touched top platter several times in several places). 3) Most destructive of all - swinging the head arm across the platters with the drive off. 4) Swinging the new heads again scratching them and the platters again.
Agreed. But not only an entire room. You can create a kind of a sealed box / chamber, with a proper air filtering system (in / output), also with a window of glass or other material like acrylic, so you can see while operating your hands inside the box. Check YT for videos and you'll find out more. The filter have to be some like hepa filter. You can use a vacuum cleaner or some fans. The pressure can be negative or positive. The important is to make the air goes through the filter before going into the box. The idea is quite simple.
@@bruno-sorocabayes that's correct, you can also build use woodboard to with hprea filter which I prefer it. But the only issue is that how can I recover my data without the tools??
Very fast wrist speed, incredible!
Good work sir
Subscribe my channel to watch more useful videos..
Hi bro, Can you please tell me or share a link related to the purchase? head from online site
Bro.....heads are not available in mkt or online......a same model ok hdd require for head replacement....
How to identify model.
You can find the model on the sticker model, serial no, capacity also....
Very useful video.....thanks
Nice video sir...keep it up...
Y commenting on your own video 😂
❤❤❤❤❤thanks
Great job sir.....
Angel, thank you for your video. I went for it and took a chance. I bought a $9 hard drive exact same one and I did the head change. Unfortunately, after the replacement, my HD is still doing the same thing. the disk spin and the heads flicker for 20 seconds and quits. What can I do?
This video isn't for fixing a hard drive, but rather destroying it. 2:10 At this exact moment, he completely destroys the hardrive and the heads. The heads cannot be swang across the plater while its off because when a hard drive is cllsed and spinning, it creates an airflow which keeps the heads from touching the platter, but still, its a really small distance, 10x times smaller than a human cell, so the moment the platter is damaged even the slighthest scratch, its done for.
Also, it is needed a head separating tool so the heads dont touch eachother while they get removed. As you cn see at 3:32 , the heads are touching eachother, so now they are all misaligned
I doubt if the hard drive will work after this. This disassembly process should only be done in a clean-room environment.
Hi, I have got questions. If I swap the head using with the same model and first 3 digits, but a different firmware, will I have a problem with recover my data?
If I find the same firm can I be able to recover my data??
@@chris01479 You cannot do this by yourself. This should only be done in a clean-room environment by trained professionals.
@@chris01479 Hi. I'm not a hdd expert but I have one seagate 3TB which died a couple days ago and I'm in process to try to recover it.
I already tried a new board with the same old bios chip on the new board, but no success yet.
Next step is try to buy another similar disk to replace the heads.
So my suggest to you is, check if the new board has the same model number (printer near the sata pins). Also, remove the old bios and put it to the new board.
Nice,thanks:)
The problem is the end product..you did not even show us if it is properly working or not.😂😂
Before falling for all this, remember that you should have an absolutely dust free environment.
Can u pls let me know from where to buy the HDD head reader in Uk
How much it will cost to repair the head?
Some things almost NO ONE will tell you about recovering data... because all most people will take in mind is cash!
If you don't have a clean room, you can create yourself a small box sealed with a window, lights inside and a high efficiency filter, using some fans or a vacuum cleaner to create positive pressure, in the same way you put only filterer air inside. There's a lot of ways to create this box, on where you can put your disk, your tools and work with safety, preventing dust or particules to sit over the plates...
This guy is not even wearing gloves
sure. He's working at a ludacrous lvl...
Apart from the clean room, flipping in and out the heads into the platters that way without parking them into a proper headcomb (look it up on Google), it will most likely damage them.
I agree with you. Can I ask have you done it to replace the heads from the donar drive??
Did it works??
@@chris01479 I tried once and messed up something, somehow I damaged the "new" heads.
Correct 💯 i have damaged head of both donar and receiver head. Dont trust these jokers
@@chris01479 I tried and failed
agreed. There are some small pieces (metallic or plastic) created to fit on these heads, preventing the heads to touch each other, also keep them in place, also a pin you lock the piece on the arm.
So just after, you can remove the entire piece and making sure the small heads are just in place and in safety.
These little pieces used to be called "ramp set" or headcomb as you said.
I'm not sure if there's a proper name to it.
Hi, I have got questions. If I swap the head using with the same model and first 3 digits, but a different firmware, will I have a problem with recover my data?
If I find the same firm can I be able to recover my data??
Head of same company, same gb, same model can replace
..
@@angelcomputech8613 Oh right, if I replace the head that come with the same make, same model, same gb and first 3 digits of serial number but different firmware, will it works and can i be able to access my data??
@@angelcomputech8613 im wating for your answer
@@angelcomputech8613 If I replace the heads, can I be able to get access to my data if I use hddsuperclone to back up the data and put them onto another drive to see if I can get the data back??
@@angelcomputech8613 ?????
where can I buy spare scanning heads?
Not available in market....you nedd a same model ok hard disk for any part replacement...
@@angelcomputech8613 thanks mate this is very tricky considering I want to recover data
@@Brainfoodguybro dont try this
Great......
head kaha par milta ha?
Not available in mkt...same model working hard disk require for replacement...
Ok Head . How can i take.
Head kaha milega
From same model hard disk.....
Kya 80gb hard disk ka disk nikal ke 40gb hard disk me laganese data recover ho payega????
No.... hard disk should be same model, same gb and same company....
@@angelcomputech8613how to get these replacement heads as I have a problem with this head too on my external hard disk. The discs have no damage just the head is clicking due to a fall from my desk accidentally.
@@angelcomputech8613 i have 2 wd320gb hdd one working and one dead i replaced the disk to each other now both dead
No.....
Head not available in mkt.....arranged fro m same model hddd....
You were very careless with the platters. I don't think this process is good. Don't follow this tutorial. Also, I don't think the heads should touch each other like that; a spacer is required last time I checked.
I agree with you. Can I ask have you done it to replace the heads from the donar drive??
Did it works??
@@chris01479 No, I know better than to attempt such procedure. Especially if the drive requires software repair to work afterwards.
@@H53. Oh right, i wish you had done it as I need your help with few things I need to know before I start doing it but you haven't done it so I'm going to find someone else who has done it and can help me with it.
Naya Head Kha Meliga
Kuch pata chala?
Your Location Please
Correct 💯 i have damaged head of both donar and receiver head. Dont trust these jokers
Je vous assure et je vous rassure ce disque ne marchera plus jamais.😢😢😢😢😢😢
No gloves? No thanks.
1000% Not Working 😢😢😢Joker
Vous avez raison ce disque ne marchera plus jamais😢😢😢😢😢😢😢
Sir mujhe bhi hard disk recover karvana hai kya aap ka number mil sakta hai jo ki aap se bat ho sake aap kahase ho
Hello.....Problem kya he hard disk me.....
@@angelcomputech8613bhai yeh replacement heads kahan say milaingay ? Yehi problem hai mera kuch bent hain disc is clean. It gets stuck in that parking slot
Head online ya offline nahin milte...same model same gb ki purani ok hard disk se arrange karna padta he....
@@angelcomputech8613 aww 😊 samjh agaye thanks bhai. Salvage junkyards dekhnay paraingay ab
Are sar ji mere hard disk recovery kar doge
To everyone that wants to recover data, dont try this!
Wrong way
Dont do like this. Your data will gone.
You can only do it if you build a small clean sir enclosure chamber, but the only problem is that you need the tools to get your data back which it will cost $10k so it I'd not worth it.
@@chris01479even if you had that, if you followed this guy's process, your data will be gone
This guy does not know a thing on what he's doing. Only attempt if you want to destroy the data on the drive because you will surely destroy it if you did what this guy did. 1) Doubt he's doing this in a clean environment considering the issue in #2. 2) Not wearing any gloves (he touched top platter several times in several places). 3) Most destructive of all - swinging the head arm across the platters with the drive off. 4) Swinging the new heads again scratching them and the platters again.
Without clean 100 class room don't open ur drive
I agree with you. Can I ask have you done it to replace the heads from the donar drive??
Did it works??
Agreed. But not only an entire room. You can create a kind of a sealed box / chamber, with a proper air filtering system (in / output), also with a window of glass or other material like acrylic, so you can see while operating your hands inside the box.
Check YT for videos and you'll find out more.
The filter have to be some like hepa filter. You can use a vacuum cleaner or some fans. The pressure can be negative or positive. The important is to make the air goes through the filter before going into the box.
The idea is quite simple.
@@bruno-sorocabayes that's correct, you can also build use woodboard to with hprea filter which I prefer it. But the only issue is that how can I recover my data without the tools??
Head kharab ho raha uska
Please contact number for my one harddisk reparing
LOL....That's Stupid tutorial ..I have ever watch...😂
Apka contact number milega kya sir