Good afternoon please my hard drive had a some cropping sounds I tried servicing it after watching you video but the problem remind the same. What should I do please
Mine dropped and actuator arm disconnected from the wheel and I don't know how to replace it or save data off it any help with it anyone? 🤔 It still lights up as if it works but nothing not 🚫 a noise from it
Bonjour, Besoin d'aide J'ai un disque WD qui une fois branché commence à tourner et s'arrete apres quelques secondes c'est un 4T avec des dossieurs important et urgent dedant, J'ai un autre meme type 4T WD aussi mais vide qui fonction, j'aimerai tanter le coup remplacer (les disques) dans celui qui fonction, un conseil et une liste des outils que je peux acheter pour le faire plus ou moin bien, (Je suis electronicien j'ai deja une touche coté ouvrir des truc) si seulement ca va me permetre de recuperer les element c'est deja bon pour eviter une prison potentiel....
My 2.5" HDDs are a bit old, I don't know if they have the function of having automatic parking technology only when inactive? no read/no write/park My models are: WD10JPVX-08JC3T5 and HGST HTS541010A99E662 Auto park technology has evolved in recent years In the reports of people I see some 2.5" HDD enclosure case USB 3.0 after being ejected in Windows 10 they remain connected and operating
Does ejecting the 2.5" HDD + enclosure case in Windows 10 put HDD it in safe parking mode or not? From what year was parking technology introduced in 2.5" HDDs?
Hi I have a hardisk with the Rom (Bios burned - in the sense that PCB's rom is missing) Reason I had buying a card to do the swapping but the repairman lost the original card) Do you think it is possible to recover my Seagate Hardisk? In short, the HD has never been opened and card that has does not have the original BIOS I feel the engine turns but it doesn't see any data windows with new pcb donnor Thx Franco Italy .
great video I am curious which is better purely from a data recovery stand point replaced the heads or transfer the platter to a donor driver with good heads or transfer the heads from a donor driver.
>WikiHow: How to repair a hard drive! >Step 1: Contact data recovery specialists and get a quote! >UA-cam: Hard drive head replacement tutorial >HDDSurgery - Head replacement process on 2.5" Seagate hard drives You're out here doing good work, keep it up.
انت عارف لو كنت فتحتوا عرفت بس انا كان تركيزى مع الاغانى ولما كب رت الفيدة بتاع atb مع ان الانجلبزى بتاعى على قدوا سبحان الله ولعدعا ثورة وكنت مركز فى الارباح وان اثبت انعا فمرتى ولية اتحرمت
I may need to do this soon. I just got an estimate of $3K USD to recover my 4TB external seagate. Bloody Hell. Very informative video! Very clear and good ambient music. Here's hoping I am able to successfully get my stuff back! Fingers crossed.
@@joshuaboltz I never tried it after all. I found I had a backup somewhere for about 80percent of what was on it. I decided to just lose the 20percent. I might try it later as an experiment. I'll update when I do.
@@Bishop2563 i think you will need very clean envrionment otherwise the data will be corrupted/lost. It's easy if you can get it running but lose all the data. It's all about the precious data, not how it can be fixed.
Can u help me My hardisk has single plater 2tb While the head is resting. I changed the plater easily without chamging anything. But when connected it to pc. It shows data cyclic redundancy Disc cannot be initialised. Both hardisk is showing same
Hi Edgar, this is a promo video, we stated this in the description section. For real data recovery case you 'll need to use a Clean room / Clean cabinet, of course.
Hi HDD Surgery Hope you can help please, I have a Seagate 2tb hard drive removed from a iMac but it need the read heads replacing as I didn't back up all my stuff. Can u help?
Hie i have a seagate baracuda st2000dm001 if i need to change the head does it have to come from same model or any size will do of the same brand if not please can i have the models which a compatible with this model
Hi, we strongly recommend to contact a professional data recovery company, do not try to perform such procedure by yourself if you do not have the experience.
can anyone tell me what does it mean 50% matching head? The person who is trying to get the data off my 2.5 Seagate barracuda pro he said the board was problematic, the motor received high voltage therefore it was spinning too fast and the head was also defective. He said he found a head but it is just 50% match...??? when I asked him, what does that mean he said he will update me later.
Head unstick tool can help to unstick the heads from the platters and transfer them to the ramp safely. Head replacement tool is used to ensure that the heads don't touch each other in process of replacement and to enable their easy mounting back to the ramp.
For Hitachi hard drives we have developed HDDS HGST 3.5'' Ramp Set. You can check it on our website or find video and animation guides on UA-cam. We have also two types of different Samsung tools and you can also find info about them either on our website or here on UA-cam.
In spite of the criticisms left by some, here, I thought the instruction process was most professional, clear and easy to follow.Presumably for those like myself attempting to recover data from a drive with damaged heads then if all I have is my spare room to try it out then that will have to do. Thanks very much for this.
i got an hard drive with 500gb and the head its damaged in the tip, can i replace the head from a hard drive of 160gb?? will it still work?? i hope you read this message, thank you for this video! Anyone knows the answer?
If you do not have any data recovery experience previously, we do NOT recommend you to try to do head replacement by your own because you may cause additional damage on your hard drive. We can offer you data recovery service and if you like to hear more details about it, please contact us on sales@hddsurgery.com
Help! I have a 250gb Seagate FreeAgent GO, I can't find anywhere to acquire a replacement Actuator Arm for my device. Can anyone please tell me where I can buy this component?
Hi guys, I have a problem with my seagate 2.5 momentus thin. There is no screw holding the head arm from the bottom... Could somebody tell me how to remove head in this cas?
VERY nicely detailed video. Note how the guy selling tools to do the job shows precisely how to do it as his tool sells better if customers succeed. Note how data recovery shop videos are very rushed and lack detail as they benefit when diyers fail and have to send the job to them ROFL
I made my own head clamping tool from match wood, it worked well enough. My Seagate one touch 2TB does not have a screw holding the head actuator in place, neither on top or on the bottom. In the case of a drive such as mine, you have to be very careful indeed when removing the headset ( it just lifts off with tweezers), because the magnet is still in place and it can grab the actuator as you lift it off, with potential damage to the platter surface. The bottom R/W head on mine had become detached. So now to find out how to remove the platter without losing the disc ailgnment. Probably really easy like the rest of this stuff which would be best done by a surgeon :) :)
This is gibberish to me, he's not talking, he's not identifying each part as he proceeds to work with it, I can't tell a head from a screw with this video. This is no use to me.
H All, I Have 500GB seagate external hard drive and its head is not working can u please help Urgently ineed to get data backup from where i can buy a head for replacing it with original head and read my data back..
So how do we know if that head is really the problem that it needs replacement? My hardisk is detected by the motherboard and I can hear it spinning but I cant boot it up, reformat or install windows in it. the pc say's "read disk error"
hye, need your help, my seagate external just broke, it cant' read the data whenever i replace the usb head..my friend tell me the problem is the pin , cannot read the disk, so can i just replace the pin, u have the video for that, thanks
Hi! I'm trying yo recover information from my disk seagate st500DM002, the BIOS isnt recognizing it. I'm thinking about buying the same disk, and change de heads, and SEE what's hapend, what do you recomend?
I done the same thing as you suggest, thought it might work but now the reader just fly's over the disk and does not recognise any data. I cant figure out what the issue is. The drive initially fell and had a broken head, I examined the disk and seen no damage. The PC did recognise the disc for a moment but then it was gone. I am wondering now is the issue the screws on the lid as Ive heard that if they are not torqued to the correct Nm the drive will not function.
Thanks
Good afternoon please my hard drive had a some cropping sounds
I tried servicing it after watching you video but the problem remind the same.
What should I do please
You can reach to PIROCC_TECH
On IG
They had helped me fix same fault
Bet they can help you too
Go reach to PIROCC_TECH
Mine dropped and actuator arm disconnected from the wheel and I don't know how to replace it or save data off it any help with it anyone? 🤔 It still lights up as if it works but nothing not 🚫 a noise from it
You can go reach to PIROCC_TECH
On IG
Had mine fixed by pirocc_tech
Bet they can help you too
PIROCC_TECH
With dat thing u but please sr
What screwdriver to use to remove centre screw
always seagate i have a bad one right now
What type of tools do i need
How to buying heads
I need WD element hard drive 2tb only head
Can you help me to fix my hhd problem 🙂
how to buy head part and can we replace at home
je un disc qui ne fonctionne pas il affiche mais pas sa partitio
Please write us in English language.
Bonjour, Besoin d'aide J'ai un disque WD qui une fois branché commence à tourner et s'arrete apres quelques secondes c'est un 4T avec des dossieurs important et urgent dedant, J'ai un autre meme type 4T WD aussi mais vide qui fonction, j'aimerai tanter le coup remplacer (les disques) dans celui qui fonction, un conseil et une liste des outils que je peux acheter pour le faire plus ou moin bien, (Je suis electronicien j'ai deja une touche coté ouvrir des truc) si seulement ca va me permetre de recuperer les element c'est deja bon pour eviter une prison potentiel....
No glove?
after replacing hedunit hard disk not showing. why is that?
Be very helpful if u would mention what size wrench for the removing of platters t3 t4 t5 ect
My 2.5" HDDs are a bit old, I don't know if they have the function of having automatic parking technology only when inactive? no read/no write/park
My models are: WD10JPVX-08JC3T5 and HGST HTS541010A99E662
Auto park technology has evolved in recent years
In the reports of people I see some 2.5" HDD enclosure case USB 3.0 after being ejected in Windows 10 they remain connected and operating
Head purchase krna h 2.5"
I want to replace my hdd head by you.Can u help me? I'm from Bangladesh.
nice video but the music is horrible.
Does ejecting the 2.5" HDD + enclosure case in Windows 10 put HDD it in safe parking mode or not?
From what year was parking technology introduced in 2.5" HDDs?
A doner head is not it ?from a exact hdd
सेम कंपनी हो तो और rpm भी सेम हो तो 80 gb का हेड 500 gb hdd drive ka match हो सकता हैं
Is the product of this brand a problematic and problematic hard disk for users?
I have this on my computer! Regards
can i fix ROW HDD by doing that ?
What happens if I don't use a parking ramp?
Where we get head
Hi, from a donor drive.
☑️
Hi I have a hardisk with the Rom (Bios burned - in the sense that PCB's rom is missing)
Reason I had buying a card to do the swapping but the repairman lost the original card)
Do you think it is possible to recover my Seagate Hardisk?
In short, the HD has never been opened and card that has does not have the original BIOS
I feel the engine turns but it doesn't see any data windows with new pcb donnor
Thx Franco Italy .
great video I am curious which is better purely from a data recovery stand point replaced the heads or transfer the platter to a donor driver with good heads or transfer the heads from a donor driver.
Did you end up doing either of the options?
Bro i dont have the lock u used to lock the head where is it to buy now and what is the name of the tool u used in at 1:12
>WikiHow: How to repair a hard drive!
>Step 1: Contact data recovery specialists and get a quote!
>UA-cam: Hard drive head replacement tutorial
>HDDSurgery - Head replacement process on 2.5" Seagate hard drives
You're out here doing good work, keep it up.
my hdd has no screws from the head on the bottom
Does replacing the head immediately allow the contents of the harddrive to be read?
Can the head from a 1TB Lacie Rugged HDD replace the head on a 5TB Lacie Rugged HDD?
انت عارف لو كنت فتحتوا
عرفت بس انا كان تركيزى مع الاغانى
ولما كب رت الفيدة بتاع atb
مع ان الانجلبزى بتاعى على قدوا
سبحان الله
ولعدعا ثورة وكنت مركز فى الارباح
وان اثبت انعا فمرتى ولية اتحرمت
I may need to do this soon. I just got an estimate of $3K USD to recover my 4TB external seagate. Bloody Hell. Very informative video! Very clear and good ambient music. Here's hoping I am able to successfully get my stuff back! Fingers crossed.
how it went?
Update?
How did it go? Did you get your stuff back?
@@joshuaboltz I never tried it after all. I found I had a backup somewhere for about 80percent of what was on it. I decided to just lose the 20percent. I might try it later as an experiment. I'll update when I do.
@@Bishop2563 i think you will need very clean envrionment otherwise the data will be corrupted/lost. It's easy if you can get it running but lose all the data. It's all about the precious data, not how it can be fixed.
Can u help me
My hardisk has single plater 2tb
While the head is resting. I changed the plater easily without chamging anything.
But when connected it to pc. It shows data cyclic redundancy
Disc cannot be initialised. Both hardisk is showing same
Video was nice, but did without cleaner room?... It's impossible!!!
Hi Edgar, this is a promo video, we stated this in the description section. For real data recovery case you 'll need to use a Clean room / Clean cabinet, of course.
does it worked or dead.....? need full video .........video was great think incomplete....
after few second of spin, it stop what may be the problem in my case head or motor?
do u have swap platters video ?
Where can I buy that head removal tool please
where to buy actuator arm ? mine is damaged and i want to replace the arm please help me
after that..can it be read on pc???or needed $$$$$ software to recover files
Hi HDD Surgery Hope you can help please, I have a Seagate 2tb hard drive removed from a iMac but it need the read heads replacing as I didn't back up all my stuff. Can u help?
Hie i have a seagate baracuda st2000dm001 if i need to change the head does it have to come from same model or any size will do of the same brand if not please can i have the models which a compatible with this model
Hi, we strongly recommend to contact a professional data recovery company, do not try to perform such procedure by yourself if you do not have the experience.
No one does it better than *stantools* on *Instagram* I got my lost data restored with him,I strongly recommend him for data recovery services💯
Hi to replace the head does the heads have to be same serial code numbers? Or can i replace them from the same model and just do a straight swap?
can anyone tell me what does it mean 50% matching head? The person who is trying to get the data off my 2.5 Seagate barracuda pro he said the board was problematic, the motor received high voltage therefore it was spinning too fast and the head was also defective. He said he found a head but it is just 50% match...??? when I asked him, what does that mean he said he will update me later.
what is the "tool" called that you put in between the heads? And can any head from any drive (different brand, etc.) by used as donor?
Following
Can I move a hard disk platter to another hard drive?
Yes, in some cases.
what is the name of the tools for separate the head?
Head unstick tool can help to unstick the heads from the platters and transfer them to the ramp safely.
Head replacement tool is used to ensure that the heads don't touch each other in process of replacement and to enable their easy mounting back to the ramp.
can we replace parts from other kinds of harddisks..such as hitachi or samsung..?
For Hitachi hard drives we have developed HDDS HGST 3.5'' Ramp Set. You can check it on our website or find video and animation guides on UA-cam. We have also two types of different Samsung tools and you can also find info about them either on our website or here on UA-cam.
Hi how to repair Hard disk Bad sectors
not by asking such things on youtube. Start from google....
@@HddSurgery y
Y
This video is a therapy for both the hard disk and our ears..
Thank you :)
Same head or different head are supported...tell me please 👍
Play at 2x speed will help you a lot
Price of the tools pls
Hi, the price for this tool is 500 Eur + shipping.
In spite of the criticisms left by some, here, I thought the instruction process was most professional, clear and easy to follow.Presumably for those like myself attempting to recover data from a drive with damaged heads then if all I have is my spare room to try it out then that will have to do.
Thanks very much for this.
Thank you Bob.
Bob Friendship a
Sorry to ask, but where I could buy one of these head alignment tools?
nice tips master ❤️❤️🙏
S
i got an hard drive with 500gb and the head its damaged in the tip, can i replace the head from a hard drive of 160gb?? will it still work??
i hope you read this message, thank you for this video!
Anyone knows the answer?
If you do not have any data recovery experience previously, we do NOT recommend you to try to do head replacement by your own because you may cause additional damage on your hard drive. We can offer you data recovery service and if you like to hear more details about it, please contact us on sales@hddsurgery.com
@@HddSurgery thank you for your answer continue the good work.
not even a pair of gloves?
I have 3 dead hard disks but I m not able to recover it after looking for videos also....what to do?
Sir 1.07 tool name
Hi, the head comb is 2B from this tool set hddsurgery.com/data-recovery-tools/hdds-sea-2-5-ramp-set
So what does the tool actually do? can you attempt such a recovery without the tool?
Is the off platter parking ramp removable?
how much will the head cost and from where can i buy head arm ? please
where to buy the head set arm?
Hi, you can order it here: hddsurgery.com/shop
Help! I have a 250gb Seagate FreeAgent GO, I can't find anywhere to acquire a replacement Actuator Arm for my device. Can anyone please tell me where I can buy this component?
can you use 500gb hdd head assembly to a 1tb hdd assembly?
rence adriane esteves yes but you will not be able to recover all data because of missing heads
wiZDom thank you
Where do you purchase a replacement head for a Toshiba Canvio Basics READY 1TB disk HDD 2.5" USB 3.0 External Hard Drive?
Hi Over, the best way is to purchase the same drive and use the heads from it.
Does setting or replacing head leads to data loss?
no
@@HddSurgery my seagate hdd is making cracking noise and its not process data properly, so can i make it replace?
@@shivagoud9629 Not you but some data recovery company
if it is done by data recovery pro, no
@@shivagoud9629 better take it to some DR company
nice video, but do you change the very tiny copper coils on the ends of long arms?
انا شمال
لان اتظلمت
مش شمال عابز اتشهر
لا عانيت حياتى كلها معناة من صغرى
فهبقا شمال
where can I get the head assembly for laptop hard drive? I have dead dead hard drive 500 GB make is Touro (external harddrive)
Hi guys, I have a problem with my seagate 2.5 momentus thin. There is no screw holding the head arm from the bottom... Could somebody tell me how to remove head in this cas?
hey there, where can i get the tools to hold the arm head? or is it hand-made?
what does control the rpms of the disk??for example is the head or the plate that makes the disk 5400/7200 rpms ????
+Marco Chapita no there is an on-board controller that controls the speed of the disk.
that is a chip.
I just want to know, what is the purpose of security pin on a hdd's head?
To not damage the platter 🤑
Hdd head arm where purchasing
why always Seagate 😂
What happens if you accidentally touch the disk with ur finger? Can you clean touched area with spirt?
where can I order the heads?
Sir salute 👍
where can I buy those tools of hdd head guide?
You can order the tools trough our website hddsurgery.com/shop , or you may contact us at sales@hddsurgery.com.
hi bro my hard disk is not working can u help me?
Shahzad Ali no
If u r in India, my no is+9194333 16434
VERY nicely detailed video. Note how the guy selling tools to do the job shows precisely how to do it as his tool sells better if customers succeed. Note how data recovery shop videos are very rushed and lack detail as they benefit when diyers fail and have to send the job to them ROFL
InstaBlaster.
I made my own head clamping tool from match wood, it worked well enough. My Seagate one touch 2TB does not have a screw holding the head actuator in place, neither on top or on the bottom. In the case of a drive such as mine, you have to be very careful indeed when removing the headset ( it just lifts off with tweezers), because the magnet is still in place and it can grab the actuator as you lift it off, with potential damage to the platter surface. The bottom R/W head on mine had become detached. So now to find out how to remove the platter without losing the disc ailgnment. Probably really easy like the rest of this stuff which would be best done by a surgeon :) :)
Have you replaced the heads and did it works??
This is gibberish to me, he's not talking, he's not identifying each part as he proceeds to work with it, I can't tell a head from a screw with this video. This is no use to me.
How do i know the faulty heads??
H All,
I Have 500GB seagate external hard drive and its head is not working
can u please help Urgently ineed to get data backup
from where i can buy a head for replacing it with original head and read my data back..
So how do we know if that head is really the problem that it needs replacement? My hardisk is detected by the motherboard and I can hear it spinning but I cant boot it up, reformat or install windows in it. the pc say's "read disk error"
Awsome ,i loved this so detailed butifully filmed ,and perfect mucic,thankyou.steve from the uk
Will that tool work s in 3.5as well?
yes you just need a different tool
hye, need your help, my seagate external just broke, it cant' read the data whenever i replace the usb head..my friend tell me the problem is the pin , cannot read the disk, so can i just replace the pin, u have the video for that, thanks
Your friend is wrong, take it to some data recovery company.
Hi! I'm trying yo recover information from my disk seagate st500DM002, the BIOS isnt recognizing it. I'm thinking about buying the same disk, and change de heads, and SEE what's hapend, what do you recomend?
Marcos Guala www.copypastemaster.co.uk
wiZDom no answer anywhere
wiZDom XD
I done the same thing as you suggest, thought it might work but now the reader just fly's over the disk and does not recognise any data. I cant figure out what the issue is. The drive initially fell and had a broken head, I examined the disk and seen no damage. The PC did recognise the disc for a moment but then it was gone. I am wondering now is the issue the screws on the lid as Ive heard that if they are not torqued to the correct Nm the drive will not function.
@Nicolle Bennevides thanks I ve later realized that, reluctantly Ive discarded the old PCB so my info is lost.
Highly spiritual background music ☺. Thanks