I love this video and your mods. I see you haven't dressed up the silver engine case screws. I have a set available for $50 + shipping. They fit great and look amazing.
I looked into the Jekill and Hyde exhaust when i first got my bike but they were hard to get my hands on. Thanks and Germany is far from me! But I will go there one day, soon!
Yeah, not many. But if you search and use the groups on Facebook then you can generally find parts you need/want. No where near as extensive as the Harley’s but it’s growing.
Really nice bike, looks great and sounds great. When i watch American bike vids im always aking myself, where's all the traffic? The distance you traveled during this vid would have taken sooooo much longer here in the UK, always traffic everywhere. 👍❤️🇬🇧
The Indian scout bobber only has 2 inches of travel from the factory. So air ride adds to that. But you can also lower it so it sits real low. Lowest point is too rough to ride, but looks so good. I’ll make a quick video about it
You get a replacement shift rod from them. Paul reached out and asked for measurements of the stock one so he would include the same side rod. I would reach out to Annitori before purchase but I assume they would have the correct length for you.
No, a low cost headlight won’t necessarily destroy it. Depending on where you order it from just make sure there’s enough reviews of them. If they are bad, there won’t be a lot of good reviews or any reviews at all
Hey man, great video. I'm thinking about this as my first bike, how much difference do the handlebars you added make? They look like they'd be so much more comfortable than the stock ones, I'm around the same height as you as well.
Hey, the bars made a very noticeable difference for me. I was hunched over quite a bit, but it depends on if you have a longer torso or not. At the Indian dealer they should have a few you can sit on with standard bars and mini apes, they are similar to the mini apes.
hi MOJ. i like the looks of the handle bar. how comfort compare to the stock handle bar? is the installation easy? any extend wire needed? thanks a lot. just love the looks and sounds of ur bike. cheers
Hey! I went with these bars because i didnt want to worry about extending the wires, clutch or brake line. These handlebars are very easy to install and dont require long wires, however it will not let you rotate the bars back all the way without being very tight on the clutch line. I got a longer clutch just because I didn't want to strain mine.
I purchased a generic one from amazon that can be programmed to my bike, and a switch and drilled and mounted it to my key housing. Would you be interested in a video on this?
Oh man yes. I have my little remote in my pocket and trying to click on the correct button while arriving slowly has been an issue and honestly dangerous.
The quick shifter has a wire from the shift rod, up to the injectors then to a control module I have under the seat. I connect to it using Bluetooth and can adjust settings in their app.
For me a few years ago, around $750 but prices could have gone up. For an exhaust I would contact Luke Barlow for a quote. I know if you want a muffler in it its somewhere north of $1,000, I believe closer to $1,200? but I could be mistaken.
@@motomoj Just pulled up my dynojet kit 4-133. Manual says "does not fit scout bobber". Website claims it fits 2022 regular Scout. I have 2022 Scout Rogue Sixty so I figured it would fit. Looks like the main issue is that shift rod need to be cut and welded. Good to know Annitori is available.
@@hkravch I know shift rods vary with each model and if you have extended/reduced reach kits. Paul at annitori took care of everything for me and confirmed shift rod length. I ordered and had my kit on a few days time. I would go back to them in the future!
@@motomoj keep tellin yourself that peewee lol you paid for indian but got polaris, id be pissed. you could have gotten any ole metric and got the same bike, sad. smh
@@motomoj oh your piss poor decisions don't affect my life at all, but you keep graspin for some sort of hint at delusions of grandeur. Personally i just chalk you up to one of the bazillion noobs on here who fancy themselves an expert because they have some viewers on a youtube channel. you keep rockin that polaris, the rest of us enjoy the laugh.
I’ll rock it. I might throw some Polaris badging on it too. I never claimed to be anything actually. Thanks for helping out the channel with some views!✌🏽
Great video editing. I like how you label the mods as you go over them. That helps a lot.
Thanks! I appreciate the feedback. I thought it would be helpful to point out what I was describing.
@@motomoj I didn’t state your editing in my comment earlier. This helped make the video more fun to watch.
@@onlyhereonce7290 thank you! I appreciate all the feedback!
Agreed
Those pipes are 🔥. Thanks for the vid!
Nice vid moj! Great edits! Keep em coming 🙌🏼
I love this video and your mods. I see you haven't dressed up the silver engine case screws. I have a set available for $50 + shipping. They fit great and look amazing.
Thanks! I don't mind the silver personally. Thanks though!
i own a scout twenty with a jekill and hyde exhaust on it.
i love ur bike and pipe. greetings from germany
I looked into the Jekill and Hyde exhaust when i first got my bike but they were hard to get my hands on. Thanks and Germany is far from me! But I will go there one day, soon!
Very good job. A solid build. The bike sounds good. Is quick. And looks good. Very nice.
Thank you!
*An honest review.* I didn't know there are third party accessories for this bike.
Yeah, not many. But if you search and use the groups on Facebook then you can generally find parts you need/want. No where near as extensive as the Harley’s but it’s growing.
Nicely done you have made it more comfortable then standard, I bought the Indian 2070 Scout for its classic looks but this is nice too
Thanks! I do like the classic looking scouts too, but the bobber had my heart from the first time I saw it.
Absolutely love that exhaust note! Indians (like Harley’s) are meant to be straight piped 😂 baffles ruin it I feel
I agree! But my ears say otherwise.
First person I've seen with the low deflector. Looks pretty good on the bobber with the higher bars. I think I might add one to mine now
It did a lot more then expected for wind protection. You will like it!
youtube.com/@bobberboss
Love That Exhaust Sound
Thanks! It sounds way better in person too!
@@motomoj All Good 👍
Thanks for posting this video. Your looks and sounds clean.
Thank you!!
Really nice bike, looks great and sounds great.
When i watch American bike vids im always aking myself, where's all the traffic? The distance you traveled during this vid would have taken sooooo much longer here in the UK, always traffic everywhere.
👍❤️🇬🇧
I can imagine! When I go to the city the traffic is heavy but the city is small so it’s still not bad. Thanks for watching!
its because we have guns, people get out the way when you wave an AK.
Nice editing my guy
Thanks for the feedback!
Air ride? Bro does it lower the back? Or what does it do? Can you make a quick video on that?? Thanks!!
The Indian scout bobber only has 2 inches of travel from the factory. So air ride adds to that. But you can also lower it so it sits real low. Lowest point is too rough to ride, but looks so good. I’ll make a quick video about it
@@motomoj sweet….remind me who sells that setup
@@bobberboss Arnott is who I have for my setup. I love it, I have about 10,000 miles on it so far.
With the quick shifter did you have to modify the shifting rod? Do you know if it would work with mid controls?
You get a replacement shift rod from them. Paul reached out and asked for measurements of the stock one so he would include the same side rod. I would reach out to Annitori before purchase but I assume they would have the correct length for you.
@@motomoj have you had any problems with the shifter? Was it a hard install? How does it compare to the dynojet one
I havent used the dynojet so i can't compare. But install was easy and customer support was top notch.
Thanks for sharing your journey.
My pleasure! I will continue to post more!
silly question as a new rider! A low cost headlight will destroy my electrical system of my brand new bike? btw Your scout is perfect mate !!!
No, a low cost headlight won’t necessarily destroy it. Depending on where you order it from just make sure there’s enough reviews of them. If they are bad, there won’t be a lot of good reviews or any reviews at all
Hey man, great video. I'm thinking about this as my first bike, how much difference do the handlebars you added make? They look like they'd be so much more comfortable than the stock ones, I'm around the same height as you as well.
Hey, the bars made a very noticeable difference for me. I was hunched over quite a bit, but it depends on if you have a longer torso or not. At the Indian dealer they should have a few you can sit on with standard bars and mini apes, they are similar to the mini apes.
Awesome build man
Thank you!
hi MOJ. i like the looks of the handle bar. how comfort compare to the stock handle bar? is the installation easy? any extend wire needed? thanks a lot. just love the looks and sounds of ur bike. cheers
Hey! I went with these bars because i didnt want to worry about extending the wires, clutch or brake line. These handlebars are very easy to install and dont require long wires, however it will not let you rotate the bars back all the way without being very tight on the clutch line. I got a longer clutch just because I didn't want to strain mine.
Sportster s all day💯👊🏾
I do like the new sportster but not the left side of it.
So you made the bobber into the rogue…
good looking scout. The fuel cap I could not hear in the video is it the Aprilia RS125?
Thanks! Its an RSV1000 gas caps that will fit.
Hey.
Have you ended up getting a garage door opener on your bike? If yes, which one?
I purchased a generic one from amazon that can be programmed to my bike, and a switch and drilled and mounted it to my key housing. Would you be interested in a video on this?
Oh man yes.
I have my little remote in my pocket and trying to click on the correct button while arriving slowly has been an issue and honestly dangerous.
Question…im in the process of installing the annitory quick shifter….any tips? Im running into some hiccups….and i thought i would ask you….
Hey just saw this. Whats going on with it? also can shoot me a message on instagram and i could help ya
Nice video and beautiful bike.
Thank you!
Not a chance you have a vid to the install for the annitori quick shift? And any advice on when installing it?
Its super straight forward, just dialing it in as to what you want
After this much time you prob found a solution but do you still need a garage door opener for your bike?
I did find a solution to this using a universal remote.
Gotcha. I asked because I’ve been selling little kits on Facebook that use a universal and mounts a button in the thermostat cover. It looks nice
Does the quick shifter have to plug in to the on board diagnostics plug in
The quick shifter has a wire from the shift rod, up to the injectors then to a control module I have under the seat. I connect to it using Bluetooth and can adjust settings in their app.
How much did the exhaust cost to have built?
For me a few years ago, around $750 but prices could have gone up. For an exhaust I would contact Luke Barlow for a quote. I know if you want a muffler in it its somewhere north of $1,000, I believe closer to $1,200? but I could be mistaken.
What size shift rod did you go with
I cant remember but Paul from Annitori reached out directly and had me confirm the measurement of the stock shift rod.
I bought a dynojet quick shifter. Didn’t come across other options. Haven’t installed it yet.
Quick shifters on these bikes are so much fun! It feels like your fighting to keep it tame. But it’s just so much fun to let it loose
@@motomoj Just pulled up my dynojet kit 4-133. Manual says "does not fit scout bobber". Website claims it fits 2022 regular Scout. I have 2022 Scout Rogue Sixty so I figured it would fit. Looks like the main issue is that shift rod need to be cut and welded. Good to know Annitori is available.
@@hkravch I know shift rods vary with each model and if you have extended/reduced reach kits. Paul at annitori took care of everything for me and confirmed shift rod length. I ordered and had my kit on a few days time. I would go back to them in the future!
What did you do for power hookup? I bought annitori and have it all hooked up except for the power.
@@hkravch I’m pretty sure I went straight to the battery?
wow this guy has totally made this look like something other than what it is. With cheap parts. Lol
Everyone should make it look however they want. I chose parts based on looks and availability, not strictly price.
Looks awesome
no cheap plastic parts pretty much hits the nail on the head for this bike.
Number plates like that is legal?
It is here in Wisconsin
Nvm found it lol
Just saw this, but it should be in the description haha. Custom from Luke Barlow.
What's the screen band
This is a windscreen from Indian.
dont put filter on video please!!
Wait what?
"polaris scout bobber", indian died in 1953.......................
True, doesn’t matter who makes it. It’s a great bike. A brand is just a name, in the end it doesn’t mean anything.
@@motomoj keep tellin yourself that peewee lol you paid for indian but got polaris, id be pissed. you could have gotten any ole metric and got the same bike, sad. smh
@@billwilliamson9842 I coluld have, your right but i didnt. Im happy my decisions affect your life. Good to know!
@@motomoj oh your piss poor decisions don't affect my life at all, but you keep graspin for some sort of hint at delusions of grandeur. Personally i just chalk you up to one of the bazillion noobs on here who fancy themselves an expert because they have some viewers on a youtube channel. you keep rockin that polaris, the rest of us enjoy the laugh.
I’ll rock it. I might throw some Polaris badging on it too. I never claimed to be anything actually. Thanks for helping out the channel with some views!✌🏽