Wooden Snowflakes on a Table Saw
Вставка
- Опубліковано 12 лис 2020
- How to make tons of wooden snowflakes using a tablesaw.
Start woodworking for less than $1000. Download my FREE GUIDE ► theweekendwoodworker.com/tww-...
PATREON ►► / wwmm
INSTAGRAM► / steveramsey_wwmm
MAILING ADDRESS:
WWMM
448 Ignacio Blvd. # 237
Novato CA 94949
----------------
Woodworking for Mere Mortals® is a registered trademark of ZRAM Media, LLC.
#woodworking #snowflakes - Навчання та стиль
I took Steve's weekend woodworker course in december 2019 and never went back to my office. changed my life. thanks Steve.
gotta say that hot glue trick at 8:39.... now that's a handy trick. i've been in that exact situation and i had no idea what to do. thanks steve!
Fun thing, blacksmiths and woodturners use this general principle all the time. It is kinda surprising to see it not used as often/popularly on the table saw
I remember doing this as a kid with my dad. I should send him the video to see if he wants to cone over and do it again.
Such a sweet comment
You should.
Agreed!
Great idea!
Your a good son,your father would love that,certain.
Making a pushblock out of mahogany is the woodworking equivalent of lighting cigars with 100 dollar bills
Hot-glueing to the 2x4 is the best tip I have seen.
You're the first channel I ever subscribed to back in 2010, and one of the reasons why I started my own UA-cam channel. Keep up the great work and thanks so much for the inspiration!
I'll support that!
Yea, him and Mathias Wandell, then Diresta.
@@TheSmallWorkshop I'll support that too!
@@TheSmallWorkshop Diresta has some interesting things but far too many tools that I'll never have and projects I'll never attempt.
Steve, this is a great video and project. I will be doing this with my daughter. You have a great way in communicating and simplifying things that could be much more complicated. You have motivated me around woodworking and exercising. Thanks!
At first I was like , how are those random cuts gonna work. Then seeing you putting it together as example and flipping them over making various patterns with the cuts you got , blown away ! ;) Really cool ! Thanks for all the information of having me and others be able to do this ourselves too !
I’m always after ideas to earn me more brownie points with senior management so thanks for this Steve.
A thousand hours of scroll sawing in ten minutes of table sawing.
Quick but dangerous process though..better to protect the fingers!!!
@@custommadecrafts1271 Where do you see the dangerous part of the process?
When you have a table saw and go too close to the saw whilst slicing . Quick 10 minutes for a lifetime of a finger (obv if it cuts)
@@custommadecrafts1271 yes...hence the fence and the last one is thick. One could resaw the last few on the band saw.
@@jeffbaker8808 The parts when he's using the table saw...
Thank you for including the mm measurements, 1st class as always :)
Thanks Steve. Always nice to see a fun festive project, especially in these times.
My wife and I love this idea and are in the process of making them right now. I really appreciate the great idea and clear instructions.
Beautiful work, Steve! 😃
Thanks a lot for the tips!
Stay safe there with your family! 🖖😊
Hi Steve. I just made my first batch of snowflakes, using this and your previous videos as a guide. They turned out amazing! I used a bandsaw for cutting them apart, and was happy to see how many flakes you can get out of a single glue-up. I just used a plain spruce wood board for the raw material, but this piece had some pretty nice dark/light grain contrast, so when you glue up the six segments that grain really contributes to the design.
I used plain 3/4" thick stock for the first batch, but for my next ones, I think I will use some 2x4 or 2x6 lumber, to get a larger snowflake.
Great video. I’ve never seen this before but looks like fun. I’m trying to do more craft style projects this holiday season and this will for sure be on the list.
Thank You for providing inspiration.
Really nice project. It's fun seeing something done outside of the box. Thanks, Steve.
I was buffing out 20 cubes tonight (long story). I was continually adjusting my grip on the paper preparing myself for the cramping that would inevitably ensue. Then I came up with a jig that I'm sure I am not the first to invent. I took a small strip of 1/2" ply as wide and long as the mouth of a spring clamp, rounded the end, wrapped a piece of paper and gripped it with the spring clamp. I experimented with grips (hand under works best) and rounded vs chisel end (rounded was best overall but chisel was great for problem areas). I finished it all in about the same amount of time, but with no hand cramping. All the while, I was thinking of Steve because I learned that technique here first. Then, 20min later, I watch this video where he ends buffing! Excellent. Thank you Steve. I love your channel. Hope this helps somebody.
You never cease to amaze me with all of your quirky wood projects.
That’s amazing. I love the batch techniques. Great video Steve!
Wonderful project! I will do my final slice cuts on my bandsaw. The thinner kerf will yield a few more snowflakes 😊👍🏻
If you'd thought to arrange them in a pattern on the bench before spraying them with lacquer, you could have hung the paper up as a snow flake "negative" decoration :) Nice project!
Good idea!, I like it!
Steve, This was a great fun little project. Learned a lot about the 30 deg angles and eventually got them correct. Side note, one of my 6 sides got buggered up. My suggestion to anyone planning to do this project is if you are cutting 6 sides, do 1 more just to be safe. Of course I had already changed the table saw fence and the angle. A perfect accident. Now our gifts will also have snowflakes ornaments. Great simple little project, keep them coming.
Just great! Let's make our own flakes. Thanks Steve.
I made something like this over ten years ago out of a magazine article... this is a great updated and clear explanation!
I'll have to give these a try. Great video!
Great video thank you!! My wife wants multiple sizes and colors so I am headed down to the shop to get started. Such a cool idea!
Congratulations on your grand woodwork skills and your presentation is just wonderful. Thanks again Steve.
Great project! I'm going to try to make some this weekend. Here's a little trick to simplify the initial cutting. At about 1:25, when you are setting the distance of your fence to get the pieces the right width, you can flip your board so that it rests against the blade with the cut side down, then you can just push the stop block and fence up to the tip of your board. That will automatically set your cut the same as the thickness of your board.
Merry Christmas!
That's what I did. Great minds...
Good call
I don't get it
The negative spaces in the snowflakes would also be a good opportunity for the router table to make some other shapes (cove bit, etc.). Great idea - thanks!
Stacked on a bandsaw with a thin blade could be interesting, too.
Filled with epoxy before slicing would be cool too
Thanks for the metric! Much appreciated!
Steve after so many weeks and days in a row I was worried you might have been a victim of 2020! Thanks for showing us the great craft idea for snowflakes.
Very very interesting video and technique. I learned a lot in the ten minutes this video lasted. Thanks for sharing. I'm surely going to try this.
Probably not yet for this Christmas
Those are beautiful! Great job as always Steve!
Thanks, Steve. This was an awesome project. I made tons of them the last few days.
Steve, you never cease to amaze me with your designs. Your narration through the process make it easy to understand and follow. To the woodshop!
This is sooo neat! Thank you so much for sharing!
Biggest tip I learned was hot gluing my piece to a 2x4 to make those last cross cuts . Great project. Thank you!
Great video and a piggy back on the other one you did ~10 years ago. I was inspired by both videos, but after building and moving I still had not set up my shop yet. Now that my shop is usable (but not set up to my liking just yet), I decided to make snowflake ornaments for this past Christmas. Being engineer minded, I decided to have a pattern in mind prior to making the pattern cuts. This year was relatively easy because I kept the blade set to 30° and proceeded with various blade depths. I've got other ideas for patterns in mind for the future.
One other thing that was useful for me was making an additional cut on the opposite end of the push block with the reverse 30° angle. This was used to make all of the cuts in the diamond strips while still being able to leave the blade set to the same angle. Having batched out my first 80 or so snowflakes, I've learned quite a bit that will help as I make more (different patterns) going forward.
Thanks so much for the inspiration and the great videos!
Wow!
I cannot wait to make these.
Great video Mr. Ramsey.
COOL !!!
Amazing Work ! I Remember You Making These Years Ago, Great Updated Video !
The snow flakes are a terrific project, thank you for sharing
Thanks Steve, I made about 15 of these and I am giving them for Christmas! Thanks again!
Excellent workmanship !
Pretty slick, Steve. Thank you.
Naturally I loved this!
Stay Frosty, Steve ❄💙❄
Thank you for doing this far enough in advance of Christmas.
I was just thinking that haha
I think your videos are just the most useful. Good instructions, good projects simply presented.
As always, thanks for a great idea!
This was a great idea. My daughter will love doing this one. She's showing interest in woodworking and she's only 9.
Mines 3 and features in my woodworking videos ! It's great to get then Involved
Loved this video, I have a sister in law who would love these. I guess I’m making her Christmas present this year. Thanks again Steve
Cool project. That hot glue to the 2x4 tip is awesome. Now I’ll be counting my fingers less often lol!
Made these for the first time today. Took some fiddling. You make it look easy. Great idea!
Very neat and fairly simple ornament. Thank you sir.
Another great woodworking video Steve! Great idea to sell at the farmers market this Christmas! Or to make as gifts!
Great idea, Steve~! My wife was watching this video over my shoulder. You know what happened next~! Off to the shop...
That is so cool! Thanks Steve!
Fun little project
Thanks for the cm!
Holy crap - beautiful!
Beautiful snowflakes Steve!
That was a lot of fun. Thanks
These are great, I’m definitely going to try it!
Outstanding job mate
Brilliant!!!! I’m currently in the process of making your router lift. But I’m thinking I’d like to give this a try!! Thanks for all your useful knowledge. !!!
Looks great, Steve.
Well done! Glad I found this video. Thank you for sharing this
Well just add this one to my weekend list 😀
Thanksgiving week slow at work, going to start making some with the extra time. Just in time for giving. Thanks for the instructions
Really good video on making them. So many uses-inlays with epoxy etc.
This is a cool project. My wife and neighbors loved them.
very nice Steve
Thank you They lookl awesome Thank you for your time and passing on this skill!
Love the Camp Crystal lake sign!
Oh my God .. you are a carpenter, artist and creative 👏👏👏👏👏👏👏👏
Wow, I never would have thought of that! Those are super cool!
These are great.. I know what I'm making for gifts for family this year. Thank you
Awesome! Thanks for the video.
I saw this and instantly ran to my shop and started to make these. Amazing idea and great to keep me busy! Also used up some scrap I was gonna throw away 😅
Awesome! These are so fun to make.
Great video!
Great video and great idea! Of all the snowflakes I've done in the shop over the years, this is a much different technique. Going to have to try this.
Beautiful, thanks!
Wow Steve the snowflakes are awesome!! Just imagine, my first woodworking tool was a scroll saw and my second is a glue gun. Who knew that would cone in handy!!
their just so brilliantly lovely
Steve.
thanx for the share
Awesome idea.
Just made my first, guided by your video. Perfect!! Many thanks!
Wow... nice job
Super cool!
Just made these today but had to use the mitre saw at the end because my 8 1/4" table saw blade didn't look like it was high enough to make a complete cut. I figured they weren't too bad for my first attempt. Thanks for sharing this!
These are awesome and I’m going to give them a try!
Thanks for the great video Steve! I will have to try these some day. 👍😊
Love your new Shop !!
Ohh thanks for the idea!! These are great!
Steve is a legend!
A major thank you for your hard work and effort to share!
Thanks Kevin!
Thanks for sharing this.
Great idea!
Love it it’s sooo cute!
They look great!
Those are awesome