An UNSPONSORED Dewalt Miter Saw Review | DWS779 Woodworking Tools
Вставка
- Опубліковано 13 січ 2023
- Watch this woodworking tool review of the Dewalt DWS779 Sliding Compound Miter Saw before you buy. I recently found this saw on Amazon for $200 off, so I decided to take the plunge and add this tool to my woodworking shop. See the good and the bad, and one nagging question about this saw's description that I can't figure out. While this miter saw is a great investment, especially at the price, I do have a couple of issues.
You can find this product at the link below.
amzn.to/3XtETav
Swanson Speed Square - amzn.to/3QNIG0b
You can find this product at the link below.
amzn.to/3XtETav
My choice for dust collection hose and adapter.
amzn.to/3iICz0D
Dust collection seems to be a weakness on virtually all miter saws. That's why I just built a shroud with a dust hood in the bottom around mine. Even that has its limitations and isn't perfect, but it did help immensely when your saw is permanently mounted in a miter station.
I think that’s par for the course with miter saws, so I don’t stress it. I think a shroud is the right call.
Great video with a concise summary including good vs bad. Definitely agree not a very portable size and weight. My older version 779 is even heavier at 67 pounds and is a workout to move.
I am an electrician(27 years). The gfci/afci combo breakers have less nuisance tripping. Especially the square d homeline if you still want the afci protection.
Thank you. I’ll look into that.
been in the business for over 40 years, personally I have NEVER seen a dust collection out of the box on any miter saw that was any good, my current Dewalt is over 20 years old , replaced the brushes once used every day up till 3 years ago went out yesterday still works fine Makita and Dewalt are my personal preference these sliders are new to me so I cant really say much about them but the ones I have seen had crappy dust collection as well, Makita and Dewalt hold up to everyday transportation and use in my opinion better than the rest
Good review! I’ve had the same saw for about two years and have been well pleased with it. My complaints are the same. Dust collection is the weakest point of the saw. It is heavy which is good and bad but with the weight and size, it’s very awkward to carry.
Have you ever figured out why they list it at 17x21 inches? I'm totally confused about that. The best I can figure is that when you lock it down and turn the bevel to the side, MAYBE that's what they mean.
I believe that is the case. It’s the most condensed footprint
out of all the reviews I watched for this model, this one is my favorite. It's on sale at my local lowes so I think I'm sold.
Thank you. That means a lot. I made this review several months ago, and I still love the saw. Probably my favorite shop tool, and it’s a workhorse.
@@SothpawDesigns You're very welcome. I just bought one yesterday, so I'm looking forward to making all kinds of stuff with it. New sub btw. Thanks again!
I just picked one up from Ace Hardware for $349. Just sign up for the rewards to get the price. 7/18/23. Can’t wait to try it!
A miter saw stand makes a WORLD of difference. There are many different styles but the style that rolls like a dolly was the preferred style.
Very true. I’m gonna be building a Miter station very soon
I have the DW780...basically the same saw. Have had it for several years and it has the same "dust collection" set up. Truthfully, the dust collection is pitiful to nonexistent. I have tried all kinds of hose attachments and dust extractors to minimize it. Minimization of the dust is the best you can hope for unfortunately. Miter saws in general all fall into this category. Otherwise, I find mine to be very adequate and it has never failed me with anything I have asked it to cut. I hope you find the same with yours.
That’s kinda what I thought. Just the general design of a miter saw seems to make dust collection difficult.
Also, I just got the new dust collection adapter. The original is plastic and expodes if you get a short piece kicked up in there
Sweet. I’ll definitely upgrade dust collection if I can improve it
Looks like a awesome saw.. U know they said my router is brushless but it has brushes I have the same one on my cnc a u do.. Keep it up brother..
Thank you
This does not have a brushless motor. Pull the black end-cap off the motor and you'll see them.
So you have used these saws?
@@martygufler2621 I own this saw.
You can always add a soft start module to your table saw. I'm guessing you have the DWE7492 or it's predecessor. There are how to video's and links to the softstart module on YT. ($25)
Thank you. I had noticed that the only tools that trip the breaker are those with an "abrupt" start, but didn't realize you could modify to add a soft start. I'll DEFINITELY look into that.
Great review.
Thanks
Well done sir
Have you tried to change the blade yet? My arbor bolt was seized in place from the factory, had to use vise grips to loosen it after the head stripped from being so tight. Found at least one other guy that had the same thing happen.
I haven’t. Actually I need to, because I have a laser to add to it. Thanks for the heads up.
Cutting Crown moulding uses 31.6º
Gotcha. Thanks. Figured it was something common that I just didn’t know.
Just got this tool for 399 plus free gifts
the miter stand
The specs/description on the Lowe's website for the 779 says it will cut a 2x16 at 90 degrees, I don't see how, I get a good 12 inches and if I want something wider it seems I would have to flip it
Since it slides, it cuts a good bit, but I've not tried to cut 16 inches.
As far as getting this saw from homedepot you get a free 80 tooth blade. You have to ask for it because most dont know but the managers are supposed to know .there is a video on UA-cam that explains it. I will find it a post it.
That's a good thing to know!
Not a brushless motor. You are sadly mistaken.
Still recommend this? Thanks! Merry Christmas!!!
I do. I use it every day! Just built an enclosure for it.
Thanks again! @@SothpawDesigns
What replacement blade did you get?
Still just rocking the blade that came with it. I mainly use the miter saw for rough cuts, and I love this saw.
Thanks! @@SothpawDesigns
does it have an electric brake?
I think so. I'd recommend checking specs for sure.
Hay, Siri. Tell the FBI everything I ever say.
ok
Can I cut bricks with this machine?
No clue. And I'm not gonna try.....
What is Dewalt lying about?
31.6 is for cutting Xtra large crown moldings in the flat position.
Thank you. Figured it was something like that.