Set Up: EtherNet/IP to Modbus TCP Gateway

This 5 minute training video takes you step-by-step through actual screen shots for the setup and configuration of the EtherNet/IP to Modbus TCP Gateway (PLX31-EIP-MBTCP)(PLX32-EIP-MBTCP).
EtherNet/IP to Modbus Gateway Product Page: psft.com/A21
Modbus & Modbus TCP Solutions from ProSoft: psft.com/A20

[@rickberrey1642]

Thanks for the clear and clean video! really makes this easier

[@wandersonpereira9884]

Hi guys. Do you have a video showing how set up a SLC 500 to read data from a PLX31-EIP-MBTCP and a PLC as a MB Server?

[@prosofttechnologyinc]

Hi there! We don't, but your regional tech support team can help with this: www.prosoft-technology.com/Services-Support/Customer-Support

[@kevinpena105]

Hi, i'm having an issue with the PLX32-EIP-MBTCP. It always shows 0 at Current Cmd in the diagnostic page and the comand errors keep adding up. I had to put a 0 in the Serv Port because if i put 502, it'd start showing error -33.

[@prosofttechnologyinc]

Hi there! Our tech support team will need to discuss with you to help. Please contact your regional team: www.prosoft-technology.com/Services-Support/Customer-Support

[@seimela]

hi i need a gateway that will translate from ethercat to Modbus TCP/IP servo drive

[@chocloso]

How can I do a Factory Restore for a MVI56-PDPMV1 module?

[@geraldsanders9232]

There really is no 'Factory Restore' for that module, and, indeed, for most ProSoft Technology modules. The only thing you can do to put them back to the way they were from the factory would be to add a new MVI56-PDPMV1 to the modules in ProSoft Configuration Builder (PCB) and then download that new, default setup to the module. This is the way they come 'from the factory' before you download your specific changes to them. This is the only "Factory Restore" you can do.
Jason Sanders
Senior Technical Support Engineer
ProSoft Technology, Inc.

[@chocloso]

@@geraldsanders9232 thank you!

[@obliviousal5320]

I have a problem, I got new PLX MBS4 and tried to connect to Ethernet on my computer but always says cable unplugged. I tried p2p and crossover Ethernet connection but same

[@prosofttechnologyinc]

Hi there! Please call our tech support team at 661-716-5100 - they'll be able to help you resolve this issue.

[@prabhakarsamal2941]

Thank u Sir I am looking for pdf file for prosoft network .