I have a few videos on ProSoft. Prosoft Playlist ua-cam.com/play/PLcbmQ4dfn0TyyICA4lXA8-JCrkqMUi_1A.html What kind of ProSoft runtime error are you experiencing? For troubleshooting in particular, this is the video I would recommend. Link provided below. How To Resolve ProSoft Command Status Error Code -48 and -36 ua-cam.com/video/X6QSizJW9u8/v-deo.html&ab_channel=RabiGurung And this video. Diagnose Any Prosoft Communication Issue ua-cam.com/video/zfk_OYuKWI4/v-deo.html&ab_channel=RabiGurung I hope these videos help you resolve your problem with ProSoft communication. I kindly request your support by subscribing and liking. Your support is greatly appreciated.
Still struggling with setting up Modbus Server functionality of the module MVI69E MBTCP? As client will be requesting reading Discrete Inputs and 32 bit analog values, I wonder which register they will get mapped in PLC.
Hi, Do You have any tutorial/clues how to set the Modbus Server functionality of the module MVI69E MBTCP? I want to know how to define that when I am writing MBTCP.DATA.WriteData[0] that I am writing to Modbus register 40001 (or any other register). Any help would be really appreciable!
We do not have that at the moment but definitely will keep that in our mind for future UA-cam Video. In a nutshell, in the ProSoft Configuration Builder you will have to allocate the Modbus register in the MNet Server section in the tree (right-hand-side of the ProSoft Configuration Builder), and link internal registers will link to these Modbus register. I hope that will give you a starting point!
Thanks for your feedback. We have upgraded our mic system recently so that we can serve good UA-cam tutorial videos to help both subscribers and none subscribers.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Where can I get that modbus map spreadsheet that you set up?
It's my own spreadsheet that I have created over the course of many years working with ProSoft.
Great demonstration ! Wonder if you also have troubleshooting error of prosoft modbus and also profit bus runtime error.
I have a few videos on ProSoft.
Prosoft Playlist
ua-cam.com/play/PLcbmQ4dfn0TyyICA4lXA8-JCrkqMUi_1A.html
What kind of ProSoft runtime error are you experiencing? For troubleshooting in particular, this is the video I would recommend. Link provided below.
How To Resolve ProSoft Command Status Error Code -48 and -36
ua-cam.com/video/X6QSizJW9u8/v-deo.html&ab_channel=RabiGurung
And this video.
Diagnose Any Prosoft Communication Issue
ua-cam.com/video/zfk_OYuKWI4/v-deo.html&ab_channel=RabiGurung
I hope these videos help you resolve your problem with ProSoft communication.
I kindly request your support by subscribing and liking. Your support is greatly appreciated.
Great tutorial! Thank you for this very useful content, right to the point and with a very clear explanation.
Glad it was helpful!
Still struggling with setting up Modbus Server functionality of the module MVI69E MBTCP? As client will be requesting reading Discrete Inputs and 32 bit analog values, I wonder which register they will get mapped in PLC.
Hi,
Do You have any tutorial/clues how to set the Modbus Server functionality of the module MVI69E MBTCP? I want to know how to define that when I am writing MBTCP.DATA.WriteData[0] that I am writing to Modbus register 40001 (or any other register). Any help would be really appreciable!
We do not have that at the moment but definitely will keep that in our mind for future UA-cam Video.
In a nutshell, in the ProSoft Configuration Builder you will have to allocate the Modbus register in the MNet Server section in the tree (right-hand-side of the ProSoft Configuration Builder), and link internal registers will link to these Modbus register. I hope that will give you a starting point!
Just a little feedback. Sound is way to low. Can barely hear you. Have all volumes turned way up and can barely hear you. Otherwise great video.
Thanks for your feedback. We have upgraded our mic system recently so that we can serve good UA-cam tutorial videos to help both subscribers and none subscribers.