Hello Daru , Since you introduced this kind of switch , I hope it's available in 3 way and 4 way because I've replaced 3 way switches and occasionally I'll come across a light fixture that's controlled from 3 or 4 locations which incorporates 4 way switches as well Also I hope they're available with the standard handle on the switch This design is great as the receptacle with the lever connectors and no worries about grounding out against the box , Since you introduced the switch , It reminds me back when I was little , The house we lived in had the old style push button switches along with either brass or copper cover plates You are one of the very few individuals who connect the ground wire to the switch , Which is great because a switch can fail , Especially those cheap switches which the internal mechanism can come in contact with the mounting bracket of the switch which can make it live and dangerous Whenever I replace switches , it's very rare that I see ground wires connected to them , It's great that you connect the ground wire to the switch because you understand that proper grounding is just as important for switches as it is for receptacles
@@DaruDhillon Thank you very much When I was talking to my younger sister and her husband about replacing all the receptacles and switches In their house I definitely want to use the new style receptacles and switches you introduced because they have your stamp of approval and they'll save alot of time in installation and I love the safety designed into them Plus they'll save me money on electrical tape because they don't need to be taped as compared to the conventional receptacles and switches , One thing I definitely love about your videos in electrical work is that you use insulated screwdrivers and I have them too , Insulated screwdrivers are especially important when working in a circuit breaker panel , It would be great if they came out with a ratcheting insulated screwdriver because sometimes I wanted an insulated screwdriver that's ratcheting when making connections in tight places So what I did , I have a Stanley ratcheting screwdriver and I put 4 layers of heat shrink tubing on the shank of the screwdriver to insulate it because a ratcheting screwdriver is very helpful when making connections in tight places , Such as a circuit breaker panel The only part of my Stanley ratcheting screwdriver that is metal is the shank and there's no metal at the handle itself So if you have a ratcheting screwdriver Apply 4 layers of heat shrink tubing to the shank and give it a try and see what you think , I'm so glad I found your videos because you do them very professionally and safely , I saw that kind of tester that you use in your videos and where did you find that one because I want to get one for myself and who makes it , I have a receptacle tester but I like the one you have Another very cool item to have in your electrical tool kit is a circuit breaker finder My older brother got me one for Christmas several years ago and it sure saves time looking for which circuit breaker to turn off
Hey Daru ... what a great vid !!! ... You know I'm not a huge fan of single filament connections ... but you may be converting me 😀 That has to be the cleanest safest switch install I have ever seen ...Good job bella mia
Bellissima! You give a detailed explanation with an easy to follow visual of this great technology - mille grazie😊 Your video has motivated me to update all my switches!
Bought a 10pk last week. I won’t use anything else. Plastic tabs were a bit finicky to break off but. Color me shocked if the residential industry isn’t a majority of lever based paddles, receptacles within a decade. Yes some people will FUD but honestly I’d rather upgrade the quality of my breakers and add surge protection rather than twisting copper around terminals.
Thanks for sharing your experience with the new lever terminals. It’s important to hear people’s opinions and feedback like yours who’ve actually tried them. Your reviews matter.
What outlet covers do you use? I have been replacing light fixtures all over the house lately and have found a couple dirty secrets. With a bathroom vanity light there was no box. House built in 1988. Supposedly back then code allowed the fixture to be the box. Nuh uh! Put one in. With a bathroom ceiling light it had a very shallow, round metal box that wasn’t grounded. Yikes. Fixed that. I love Wago connectors. Anxious to try the lever lock outlets and switches. Hopefully the prices are coming down. If I replaced every switch and outlet it would cost a fortune and take a month to do. But I’m retired. I hope I have time.
If you’re replacing a lot of outlets and switches best price is to buy in the multi-pack. I have a link in the description where they cost $2 each. You can use a name brand or budget brand cover. I often use the less expensive ones because and they work well. It’s great that you are taking the time to do your electrical when you can. That’s smart.
@@DaruDhillon thank you. I checked through your link and the multi-packs are well priced. Just have to do the replacements in stages. We have 3 levels so a lot to change out. I just ran across your video; learned some things; enjoyed; subscribed.
ok so i bought the plugs and now i have to get the switches, ill need some 20 amps for the bathroom as well. i absolutely love the fact they seperate themselves for the cover plate. its a pain trying to get new ones to line up just right with 12 wire.... thanks again for the video......
You get things done! You’re on it! The lining up part is genius. Smart addition. Thanks for letting us know your experience with them. Happy to hear that they were helpful.
Regular wall plates remove easily with a flathead screwdriver. Screwless plates are removed by inserting a flathead screwdriver on the underside of the plate to gently pop off the wall plate.
Why don’t you want the copper exposed around the bolt? Asking because I need to replace a switch and noticed the broken switch has the copper showing as in this video.
Good question thanks for asking. Copper wire is conductive. If metal touches metal it can cause a short which is not safe. That is why wires are insulated with the plastic sheathing for protection.
Imagine how a plastic molded assembly holds up to an assembly made from Steel over 10 years? While you cannot see inside that assembly, what actually bonds your circuit together when you close that little plastic snap you can absolutely see how well a good electrician can make a perfect electrical contact with a screw against a copper wire and apply the proper amount of torque so that the connection is both clean and strong and tight so that it does not turn into a fire hazard. Also after 10 years when you open a box that has had electrical tape wrapped around it to make it less shocking for the person to service it, you usually find that electrical tape is no longer functional as such a safety barrier. If you are not the electrician or know what you're doing you shouldn't be in those tiny little boxes in the first place! Cute device, but I wouldn't trust it till I get one in my hands and completely take it apart to see just how good it makes contact for an electrical connection. I worked for a plastic manufacturer and I know very well how Plastics degrade over time and if the pressure against the electrical connection is dependent on force made by a plastic component.... well it's game over for me.
after watching your other video with the new outlet boxes I bought them, and now I am going to but the switch boxes. Thank you so much as I said before no more 100 dollar a plug electricians.
I would never use regular electric tape to protect screws, it will fail in a year or two. If you feel the need to tape over the screws use self amalgamating tape, it bonds to itself and will never fail.
Can you give your advice on Leviton E5601-MW recpeticals they are new with built in wago connectors, I just bought 30 of them but after reading some stuff online and talking to an electrition family friend i am now parinoid about using them. They do seem very light and plasticky but i dont plan on plugging anything big into them like heaters etc. Also is it safe to install 15a recepticals chained to 20a ones on the same circuit?
I think it’s important you make a decision that feels right to you. I can understand all sides. Electricians are often cautious with good reason. On the flip side extreme caution prevents innovation. If you’re using heaters you can always go with traditional outlets. I had a heater catch fire on me once, years ago due to overheating. Caught it just in time. I haven’t researched or used the model you posted so I can’t weigh in. Thanks for your question.
5:26 totally loved this test
Love watching Daru and her awesome home improvements.
Thanks I appreciate the support!
I always enjoy your videos and input. Where I am from it is a big no no to wrap the back of an outlet or switch with electrical tape.
Thanks! I’ve heard that in some areas. It’s good to know and share. Different perspectives are good and helpful!
Hello Daru , Since you introduced this kind of switch , I hope it's available in 3 way and 4 way because I've replaced 3 way switches and occasionally I'll come across a light fixture that's controlled from 3 or 4 locations which incorporates 4 way switches as well
Also I hope they're available with the standard handle on the switch
This design is great as the receptacle with the lever connectors and no worries about grounding out against the box , Since you introduced the switch , It reminds me back when I was little , The house we lived in had the old style push button switches along with either brass or copper cover plates
You are one of the very few individuals who connect the ground wire to the switch , Which is great because a switch can fail , Especially those cheap switches which the internal mechanism can come in contact with the mounting bracket of the switch which can make it live and dangerous
Whenever I replace switches , it's very rare that I see ground wires connected to them , It's great that you connect the ground wire to the switch because you understand that proper grounding is just as important for switches as it is for receptacles
Thanks for that Marty I tend to ground everything. They do make 3 way switches in these too which you should like.👍🏽
@@DaruDhillon Thank you very much
When I was talking to my younger sister and her husband about replacing all the receptacles and switches In their house
I definitely want to use the new style receptacles and switches you introduced because they have your stamp of approval and they'll save alot of time in installation and I love the safety designed into them
Plus they'll save me money on electrical tape because they don't need to be taped as compared to the conventional receptacles and switches , One thing I definitely love about your videos in electrical work is that you use insulated screwdrivers and I have them too , Insulated screwdrivers are especially important when working in a circuit breaker panel , It would be great if they came out with a ratcheting insulated screwdriver because sometimes I wanted an insulated screwdriver that's ratcheting when making connections in tight places
So what I did , I have a Stanley ratcheting screwdriver and I put 4 layers of heat shrink tubing on the shank of the screwdriver to insulate it because a ratcheting screwdriver is very helpful when making connections in tight places , Such as a circuit breaker panel
The only part of my Stanley ratcheting screwdriver that is metal is the shank and there's no metal at the handle itself
So if you have a ratcheting screwdriver
Apply 4 layers of heat shrink tubing to the shank and give it a try and see what you think , I'm so glad I found your videos because you do them very professionally and safely , I saw that kind of tester that you use in your videos and where did you find that one because I want to get one for myself and who makes it , I have a receptacle tester but I like the one you have
Another very cool item to have in your electrical tool kit is a circuit breaker finder
My older brother got me one for Christmas several years ago and it sure saves time looking for which circuit breaker to turn off
Hey Daru ... what a great vid !!! ... You know I'm not a huge fan of single filament connections ... but you may be converting me 😀
That has to be the cleanest safest switch install I have ever seen ...Good job bella mia
Thanks Tony! Glad you liked the installation.
Bellissima!
You give a detailed explanation with an easy to follow visual of this great technology - mille grazie😊
Your video has motivated me to update all my switches!
You're very welcome! You got this. 💕🇮🇹
Cool switch upgrade! I always hate trying to get the proper bend in the wire end to connect to the screw terminal.
You said it. One the trickier parts is getting perfect hooks. J :)
Bought a 10pk last week. I won’t use anything else. Plastic tabs were a bit finicky to break off but.
Color me shocked if the residential industry isn’t a majority of lever based paddles, receptacles within a decade.
Yes some people will FUD but honestly I’d rather upgrade the quality of my breakers and add surge protection rather than twisting copper around terminals.
Thanks for sharing your experience with the new lever terminals. It’s important to hear people’s opinions and feedback like yours who’ve actually tried them. Your reviews matter.
What outlet covers do you use? I have been replacing light fixtures all over the house lately and have found a couple dirty secrets. With a bathroom vanity light there was no box. House built in 1988. Supposedly back then code allowed the fixture to be the box. Nuh uh! Put one in. With a bathroom ceiling light it had a very shallow, round metal box that wasn’t grounded. Yikes. Fixed that. I love Wago connectors. Anxious to try the lever lock outlets and switches. Hopefully the prices are coming down. If I replaced every switch and outlet it would cost a fortune and take a month to do. But I’m retired. I hope I have time.
If you’re replacing a lot of outlets and switches best price is to buy in the multi-pack. I have a link in the description where they cost $2 each. You can use a name brand or budget brand cover. I often use the less expensive ones because and they work well. It’s great that you are taking the time to do your electrical when you can. That’s smart.
@@DaruDhillon thank you. I checked through your link and the multi-packs are well priced. Just have to do the replacements in stages. We have 3 levels so a lot to change out. I just ran across your video; learned some things; enjoyed; subscribed.
@@jugheadjones5458 thanks! I’m glad you found it helpful. I like to do projects in stages too. Everything comes in time. Enjoy your day!
ok so i bought the plugs and now i have to get the switches, ill need some 20 amps for the bathroom as well. i absolutely love the fact they seperate themselves for the cover plate. its a pain trying to get new ones to line up just right with 12 wire.... thanks again for the video......
You get things done! You’re on it! The lining up part is genius. Smart addition. Thanks for letting us know your experience with them. Happy to hear that they were helpful.
looks clean but I can see myself cracking switch while breaking off tab lol! Also how easy is it to remove face plate without wall damage?
Regular wall plates remove easily with a flathead screwdriver. Screwless plates are removed by inserting a flathead screwdriver on the underside of the plate to gently pop off the wall plate.
Why don’t you want the copper exposed around the bolt? Asking because I need to replace a switch and noticed the broken switch has the copper showing as in this video.
Good question thanks for asking. Copper wire is conductive. If metal touches metal it can cause a short which is not safe. That is why wires are insulated with the plastic sheathing for protection.
Just found your channel ... Love it
Welcome! Glad you’re here, thanks!
Thanks. Very nice! I have looked my stores electric for these new electrical receptacles & switches and they don’t have any. Where can I find these?
I have a link in the description box where you can buy them or get more information. Thanks for the question!
Do they have illuminated switches, too?
Those come in handy but they don’t have them yet.
Tidy and safe, perfect!
Glad you like it!
Great video, do you have a link to the screwless covers?
Hi! I have a link in the description to my Amazon storefront. Click on the electrical section and you’ll see them. They’re a great find, good price!
Thanks for watching and commenting! What do you think about the New Lever Light Switches? Have your say here:
Imagine how a plastic molded assembly holds up to an assembly made from Steel over 10 years? While you cannot see inside that assembly, what actually bonds your circuit together when you close that little plastic snap you can absolutely see how well a good electrician can make a perfect electrical contact with a screw against a copper wire and apply the proper amount of torque so that the connection is both clean and strong and tight so that it does not turn into a fire hazard. Also after 10 years when you open a box that has had electrical tape wrapped around it to make it less shocking for the person to service it, you usually find that electrical tape is no longer functional as such a safety barrier. If you are not the electrician or know what you're doing you shouldn't be in those tiny little boxes in the first place! Cute device, but I wouldn't trust it till I get one in my hands and completely take it apart to see just how good it makes contact for an electrical connection. I worked for a plastic manufacturer and I know very well how Plastics degrade over time and if the pressure against the electrical connection is dependent on force made by a plastic component.... well it's game over for me.
Thanks for your feedback on this!
after watching your other video with the new outlet boxes I bought them, and now I am going to but the switch boxes. Thank you so much as I said before no more 100 dollar a plug electricians.
I’m so glad you did it yourself! That’s great to hear. Well done!
Awesome stuff
It is! Glad to hear from you!
I would never use regular electric tape to protect screws, it will fail in a year or two. If you feel the need to tape over the screws use self amalgamating tape, it bonds to itself and will never fail.
Appreciate your advice. Thanks!
Does screwless wallplates mean people will stop painting over the wallplates?
Yes please!
Super helpful 🎉
Glad you think so!
Can you give your advice on Leviton E5601-MW recpeticals they are new with built in wago connectors, I just bought 30 of them but after reading some stuff online and talking to an electrition family friend i am now parinoid about using them. They do seem very light and plasticky but i dont plan on plugging anything big into them like heaters etc. Also is it safe to install 15a recepticals chained to 20a ones on the same circuit?
I think it’s important you make a decision that feels right to you. I can understand all sides. Electricians are often cautious with good reason. On the flip side extreme caution prevents innovation. If you’re using heaters you can always go with traditional outlets. I had a heater catch fire on me once, years ago due to overheating. Caught it just in time. I haven’t researched or used the model you posted so I can’t weigh in. Thanks for your question.
Ok, the outlets are the same versions as these switches.@@DaruDhillon
What if you have a white and black wire? Does it make a difference in the top or bottom?
You’ll insert the white into the black terminal.
What if we collaborate? What if you let me be your thumbnail designer for free swap for your testimonials.😊
You can send me a sample of your work if you like. Appreciate your offer. I would pay for that skill and help!
@@DaruDhillon It's a great opportunity for me☺. Can I get your email?
@@DaruDhillon It's a great opportunity for me. Where can I send my sample work?
@@DaruDhillon I've already send a sample of my work on your email. Would love if it met your expectations. Looking forward to working with you. :)
@@DaruDhillon I've already send my sample works on your email. Excited to working with you. 😁