I feel that. I just picked up an is500 , but I’m waist deep in a 2jz forged build for my 2004 IS300 so this is not really hard at all in comparison. Sets u apart when u have an is500 with all the oil and trans coolers and brake upgrade .
Only issue i would have now having parking break. Using transmission for parking up a hill would kill it over time. Hoping you will find a solution let us know!
Had the same done to my 2013 GS350. When i first took the calipers out of the box and saw the orange color, i was a bit underwhelmed because the orang looks a bit dull under low light but after it was installed the color really pops during daytime.
I functionality of parking brake entirely. I made a harness to have the parking brake actuator installed and turned off auto EPB and running around with no parking brake but also no EPB error code.
your video is perfect, bro! Thank you! I was doing a lot of research as well about upgrading my stock brakes on my IS350 F Sport. I assume it's the same process ? - Thanks in advance!
so worth it! i installed these on my IS350 after having the rr racing bbk and i absolutely love the oem+ look on my car. so since you did the rears as well im assuming you lost the electronic parking brake function?
I love your videos man! Subscribed for all the IS500 content. Question for you though, what are the specs on the te37s? I have a set of te’s laying around that are 19x9.5 +22 for the front and 10.5 +22 for the rear. Think these will fit? Got my IS500 on the way in the ultra white. Thanks man.
@@specONEwhat’s up man thanks for the vid , I have a 21 350 . I have the same wheels but squared 19x9.5 +34 all around , should be no issues ? I’m thinking of doing the front in GSF calipers I believe same as RCF right? Thanks 🙏🏼
This looks so good especially against the incognito paint. But just curious if the actual GSF or RCF dust shields would fit instead of cutting the stock ones 🤔
It will depend on how different the Knuckle is compared to standard IS/RC vs RCF/GSF The Rear likely no since the knuckle is entirely different. The Front maybe but since I was cutting up the rear already, i decided to save myself trouble and just cut the front, which required very minimal cutting.
much needed upgrade! does the bracket manufacturer suggest to grind off the bits of the bracket and the original mounting bracket or is that something you took notice and did?
The caliper yes, was instructed by bracket designer. The knuckle I did on my own when I noticed it could be touching but it wasn't super necessary, feedback was given to the bracket designer and he it's revising the bracket slightly.
I may have missed this. Does the Electornic Parking Brake work on the rear? I have a 22 350 and have been pondering doing this. The front seems simple ( bolts on from what I can tell ) .. .rears though..
I did not drain all the fluid since it's technically new fluid with the car being under 1000 miles at the time. There is tape on the caliper because I didn't want to scratch the finish while installing and test fitting wheels
What year RC350 do you have? My EPB don't work and has an error message but I made a harness to plug the actuator inside the car to trick it to think it's still working
@@specONE I have a ‘21. That’s a smart fix for the error! The ‘23 RC F will have electric parking brake, but I’m guessing it’ll be drum brake style like on the GS F and LC500. Basically there’s a motor that pulls the cable to activate the drum parking brake. I’ve just looked at the gs f parts diagram and it looks super complicated to install, and the actuator alone is $1500 lol. Not even sure if it would work with the IS/RC ecu
@@specONE @specONE can we have a video, explaining the work around to remove the emergency brake error? any update on fixing the emergency brake itself?
So everything OEM Lexus up front fits. Check with a Lexus parts department or online store for pricing there. The rear requires an adapter bracket for the OEM stuff to fit. Can be purchased here www.350phi.com/shop/product/lexus-gsf-rcf-rear-brembo-caliper-mounting-bracket-kit/
New subscriber here! Awesome videos! Just bought RX 500H got some jdm visors waiting for warmer weather to install. Wondering if GSF or RCF rear calipers bracket will fit on the RX 500H?! See you on the next one!
Welcome to the Lexus community! Brake question is best to ask 350phi, he's the expert in that area. You can find him on the forums, his website or other social media platforms
@@specONE Thank you so much glad to be finally in the Lexus community! Will reach out to 350phi shortly and I'll let'um know that you sent me. Thank you again!
I did a quick search and it looks like the part number you mentioned is a newer design clip. I believe either clip I list or the one you list should work since the caliper itself had no change to it.
This is why I went straight from IS350 to used GSF, for the same price point of an IS500, it has all the good stuff and saved a lot time upgrading.
I feel that. I just picked up an is500 , but I’m waist deep in a 2jz forged build for my 2004 IS300 so this is not really hard at all in comparison. Sets u apart when u have an is500 with all the oil and trans coolers and brake upgrade .
Plus the IS500 weighs less than the GS F. With better tires alone you’ll be looking at a GS F in your rear view mirror.
That’s why you weigh more and get gapped
Dude it's a 100 pounds lighter 😂😂😂 You lose that weight with a seat change @@minhnguyen96
Only issue i would have now having parking break. Using transmission for parking up a hill would kill it over time. Hoping you will find a solution let us know!
Amazing work. Can we see the finished product with the wheels back on?
Had the same done to my 2013 GS350. When i first took the calipers out of the box and saw the orange color, i was a bit underwhelmed because the orang looks a bit dull under low light but after it was installed the color really pops during daytime.
Hi, just wanted to ask if the rear brakelines in the video link would fit a 15 base gs. Thanks
@@w.d.n.01 my rears are stock gs350. Still trying to get a decent set of refurb gsf rears.
Hey man, great video! How did you solve the Electronic Parking Brake?
I functionality of parking brake entirely. I made a harness to have the parking brake actuator installed and turned off auto EPB and running around with no parking brake but also no EPB error code.
Were you able to figure out the parking break situation?
Very nice brake upgrade! Do you think those BBK will fit 2024 IS350 FSport? Thanks!
Yup. Exactly what I did is what you will need to do to upgrade your 2024 IS350
@ I might just go for the front BBK upgrade…I don’t want to lose the e brake function! for the rear. Thank you!
Is there any alternatives to this for the enkei wheels? Or I was wondering if there are better pads and or rotors? Thanks
your video is perfect, bro! Thank you! I was doing a lot of research as well about upgrading my stock brakes on my IS350 F Sport. I assume it's the same process ? - Thanks in advance!
yes IS350 would be same process..
so worth it! i installed these on my IS350 after having the rr racing bbk and i absolutely love the oem+ look on my car. so since you did the rears as well im assuming you lost the electronic parking brake function?
Yup for now, lost electronic parking brake. Hopefully to resolve that eventually
Which brake fluid did you use?
For the RR RACING BBK..
did u use the Wilwood brand from the RR website or OEM?
I love your videos man! Subscribed for all the IS500 content. Question for you though, what are the specs on the te37s? I have a set of te’s laying around that are 19x9.5 +22 for the front and 10.5 +22 for the rear. Think these will fit? Got my IS500 on the way in the ultra white. Thanks man.
Don't think those specs will fit without a lot of camber.
The specs on my wheels is 19X8.5 +30 , 19X9.5 +34
@@specONE ah yeah I figured, they were pretty flush on my model 3.
@@specONEhello mate. What tire size you running for r19 TE37 ?
@@specONEwhat’s up man thanks for the vid , I have a 21 350 . I have the same wheels but squared 19x9.5 +34 all around , should be no issues ? I’m thinking of doing the front in GSF calipers I believe same as RCF right?
Thanks 🙏🏼
Thanks! Great DIY video. Curious, no more parking break now? You heat shrink wrapped the connector?
Yes no more parking brake. Heatstrink the connector to protect it from the water elements
This looks so good especially against the incognito paint. But just curious if the actual GSF or RCF dust shields would fit instead of cutting the stock ones 🤔
It will depend on how different the Knuckle is compared to standard IS/RC vs RCF/GSF
The Rear likely no since the knuckle is entirely different. The Front maybe but since I was cutting up the rear already, i decided to save myself trouble and just cut the front, which required very minimal cutting.
Didn't need to cut on my 2013 GS350, just needed to fold about 5mm of shielding on the top.
@@lancewood1410 So Lance, you didn’t cut your shields front or rear?
@@Brandon-jy2yl front shields folded the top part about 5mm. Didn't change the rear calipers...yet.
@@lancewood1410 ok. What color is your GS, and what caliper color did you go with
Wait, since you left the e-brake actuator unplugged so you won’t have an e-brake?
Correct..no ebrake for now. And error fault on instrument cluster. Will try to solve this in the future
@@specONE can’t wait to see how it turns out!
Does the rotor work with the e brake?
@@crazyed90 there is no ebrake. The factory parking bracket actuator will not fit
Looking to do the same for my base gs
any luck finding a way to get the e brake to work?
You happen to know who found out that these will not work with the enkei is500 wheels? I have a 15mm spacer up front hoping that will help
Spacers will definitely help with clearance!
much needed upgrade! does the bracket manufacturer suggest to grind off the bits of the bracket and the original mounting bracket or is that something you took notice and did?
The caliper yes, was instructed by bracket designer. The knuckle I did on my own when I noticed it could be touching but it wasn't super necessary, feedback was given to the bracket designer and he it's revising the bracket slightly.
@@specONEgood afternoon did you buy the brembo caliper from Lexus or Discount Parts Monster aka Toyota of Hollywood
Yes I did
@@specONE which one? I’m just trying to get the correct parts
I recommend checking the Clublexus.com forums for part numbers
I may have missed this. Does the Electornic Parking Brake work on the rear? I have a 22 350 and have been pondering doing this. The front seems simple ( bolts on from what I can tell ) .. .rears though..
Electronic Parking Brake is disabled and there is fault error that is display in the instrument cluster
@@specONE Damn. I may just do the fronts then. Thanks brother. Appreciate it.
Will the RCF's OEM dust shield fit on the is500 knuckle?
I don't know the answer to this. Nobody in the Lexus community has confirmed yet.
would rear IS F calibers work on the rears of the IS500 and it's ebp?
rear ISF caliper will NOT work on IS500
could you just upgrade just the front only?I don't want to lose the Brake.
Yes you could do anything you want. Many have went this route actually.
What were those orange hooks you used to hang the calipers?
They are brake caliper hangers
amzn.to/3NEiZ0X
Where did you get your calipers?
A Lexus dealership parts online. Discount Parts Monster
Will gsf calipers fit on stock is500 rear brakes
No, you'll have to replace the rotor and buy a adapter bracket so the GSF caliper can bolt on. It's shown in the video what needs to be done
0:31 Those are the rear calipers of "THE IS500"?
Yup they are of the stock IS500, I have a IS500
@@specONE wow! Unbelievable Lexus 🤦🏻♂️
Yo bro did you drain the brake fluid
And also why tape on the brake when installing on rotor . Thanks for help
I did not drain all the fluid since it's technically new fluid with the car being under 1000 miles at the time. There is tape on the caliper because I didn't want to scratch the finish while installing and test fitting wheels
@@specONE do u have Instagram bro
Will this conversion fit the 2021 is350?
Yup, exactly the same process for IS350
How is it working not having e brake? Any codes? Looking to do this on my rc350 so pls lmk.
What year RC350 do you have? My EPB don't work and has an error message but I made a harness to plug the actuator inside the car to trick it to think it's still working
@@specONE I have a ‘21. That’s a smart fix for the error! The ‘23 RC F will have electric parking brake, but I’m guessing it’ll be drum brake style like on the GS F and LC500. Basically there’s a motor that pulls the cable to activate the drum parking brake. I’ve just looked at the gs f parts diagram and it looks super complicated to install, and the actuator alone is $1500 lol. Not even sure if it would work with the IS/RC ecu
@@specONE @specONE can we have a video, explaining the work around to remove the emergency brake error? any update on fixing the emergency brake itself?
+1 for the ebrake error code/light solution :)
How much was the brake kit?
So everything OEM Lexus up front fits. Check with a Lexus parts department or online store for pricing there.
The rear requires an adapter bracket for the OEM stuff to fit. Can be purchased here
www.350phi.com/shop/product/lexus-gsf-rcf-rear-brembo-caliper-mounting-bracket-kit/
Bless you 😂
New subscriber here! Awesome videos! Just bought RX 500H got some jdm visors waiting for warmer weather to install. Wondering if GSF or RCF rear calipers bracket will fit on the RX 500H?! See you on the next one!
Welcome to the Lexus community! Brake question is best to ask 350phi, he's the expert in that area. You can find him on the forums, his website or other social media platforms
@@specONE Thank you so much glad to be finally in the Lexus community! Will reach out to 350phi shortly and I'll let'um know that you sent me. Thank you again!
Did you need to install the anti rattle clips? 47748-0W170 My calipers came with them because they’re from a 2020-2022 RCF
I did a quick search and it looks like the part number you mentioned is a newer design clip. I believe either clip I list or the one you list should work since the caliper itself had no change to it.
Looks really nice but I wouldn't do it for my is500 because insurance liabilities.
Oh never heard of this consideration. Why so?
lol?
Bro , stay in the bleachers . Lol