I have same module A7670C but with different DIY board, It does not get signal when I use JIO sim, is there anything different in this board which enables JIO sim support?
did you have a7670e? is a7670e support jio sim for sms and calls , i tried a lot ,but not successfull with jio sim , bsnl is working perfect but jio is not working, since its showing ATREADY, SMS DONE, network connection and all with jio sim , i am not able to send and receive calls and sms, i don't know why ,can you help me
Hello Sir. I have few questions 1) is this device compatible with raspberry pi 4 ? 2) Did you check with raspberry pi 4 and did you get the 4G Speed after connect this module in raspberry pi 4 ?
Hi, I will be connecting microcontroller to this board through UART. I presume, the controller can communicate with the module using AT commands on UART. Pls confirm. In your video usb channel is used to communicate using AT commands.
Hello Ravi, is there any configuration changed in the new A7670C module. Earlier version it was working with Jio sim. Now the new module is denying network registration.but it's working fine with Airtel sim. Do you know why it's happening?
Hii Sir currently i am working on Simcom A7670C adiy breakout board. I done 2 programs on that to sent and receive the data these two programs was successfully done using JIO sim. After that i want to sent some data of a sensor to mqtt. For that i changed the sim from JIO to Airtel from then onwards my net light led was not blinking and the module was not able to connect to the network after that i inter changed the Sim's again. And this time for jio sim also it is not taking the signal. And i contacted adiy customer support from there also i didn't get proper response. So please help me in this sir.
Hi, Mr. Ravi. I have several question. 1. Does the "LASS" has any significance meaning? 2. Does the module still in production or will discontinued soon? 3. Could you share the A7670C AT command documentation? Hope you can answer my question. Thank you.
@@RaviPujar you say the A7670 or A7672 series is not for high speed and not good for video streaming stuff? could you use that A7670 or A7672 series with ESP32 and connect it easily?
@RaviPujar thanks for reply. what microcontroller can you connect the board with - raspberry pi zero W or a ESP32? please let me know. also what is the power consumption of the A7670 or A7672 series? im looking for a LTE board which works in the US and in europe.
@@Gerald-iz7mv You can connect to any MCU using UART lines. Power consumption is different in each modes. You need to refer to datasheet. A7670E/A7672E works in Europe. For USA A7670SA might work but it doesnt have certifications needed for USA, So either use SIM7600NA /SIM7600G for USA, or SIM7070G
Hi, I'm working on a project that requires the OpenSDK for the A7670SA module. Do you happen to have a link to SDK? If so, could you please send it to me? I would really appreciate it.
I have same module A7670C but with different DIY board, It does not get signal when I use JIO sim, is there anything different in this board which enables JIO sim support?
HEY RAVI
can u provide me the module library. PLS
Is there any project tutorials that has been done by using this board?
Can anyone suggest, where we can buy ZX905 4G in India?? Kindly kindly
Hi sir, my "LASS" when AT+CNUM does show my phone_number and I can't send sms. What should I do? Hope you can answer my question. Thank sir.
Do you have a version that's usable in the USA?
Yes. Please mail to ravi@valetron.com
did you have a7670e? is a7670e support jio sim for sms and calls , i tried a lot ,but not successfull with jio sim , bsnl is working perfect but jio is not working, since its showing ATREADY, SMS DONE, network connection and all with jio sim , i am not able to send and receive calls and sms, i don't know why ,can you help me
I think it doesn't have VoLTE. It could be the reason and European band module lacks band 40 support which Jio uses
Use A7672S
thanks will test with it
do you tested with that a7672s with jio sim
@@kvamsidharvamsi5800 Yes. It works with our A7670C-LASS board also. Short Video is there in channel
Great work guys.
Thank you
JIO SIM working fine.
but Airtel sim working except call function(ATD;) why?
any setting issue?
PLEASE TELL ME.........THANX IN ADVANCE
Need to enable volte
Try setting below
AT+CGDCONT=2,"IPV4V6","IMS"
Hello Sir.
I have few questions
1) is this device compatible with raspberry pi 4 ?
2) Did you check with raspberry pi 4 and did you get the 4G Speed after connect this module in raspberry pi 4 ?
1. Yes it is compatible. You can interface by USB or UART.
2. USB mode on windows , 5MBps download, 2 MBps upload on Airtel SIM tested.
I just bought this. Awesome product. Can you share the pre-saved strings file for AT commands? . Thanks a lot
Hi Ahmed, what's presaved strings file.
I can't find the driver for this module (I have the SA version). Can anyone help me?
USB drivers are all same for A7670. Check docs.valetron.com
does this support USSD Data transfert?
Hi, I will be connecting microcontroller to this board through UART. I presume, the controller can communicate with the module using AT commands on UART. Pls confirm. In your video usb channel is used to communicate using AT commands.
Yes, it supports UART. You can check our website for connection details
Does any SIM card that supports 4G LTE work with this or does it have to be NB-IoT, M2M, or any of the other types?
Any normal SIM which you use in phone should work. It supports CAT-1
Hi Ravi,
Can we upgrade firmware of A7670C 4G module ?
Would like to upgrade from TLS 1.2 to TLS 1.3 , any information on this will be great help
You can update the firmware using aboot. But you need to find the right firmware
I'm really lost as where to start programing this over a ESP32 with VSCODE , do you have a tutorial or guide for this?
We don't can't esp code for this. But you can check VALTRACK-V4-VTS-ESP32-C3, it comes with same module and ESP. And firmware is on github
If i want to power on this module without using power key can i do it by bypassing the power key ?
No, i think PWRKEY pin activation is necessary
Sir can I ask if where I can buy this GSM module. I just need din in our thesis prototype. Thanks
You can buy from us. Please mail to ravi@valetron.com
Hello Ravi, is there any configuration changed in the new A7670C module. Earlier version it was working with Jio sim. Now the new module is denying network registration.but it's working fine with Airtel sim. Do you know why it's happening?
Hi, Which versions you are talking about?
Does SIM A7670C development board has pins for microphone and earphone?
Yes, pins have been left out for external mic and speaker circuit
Hii Sir currently i am working on Simcom A7670C adiy breakout board. I done 2 programs on that to sent and receive the data these two programs was successfully done using JIO sim. After that i want to sent some data of a sensor to mqtt. For that i changed the sim from JIO to Airtel from then onwards my net light led was not blinking and the module was not able to connect to the network after that i inter changed the Sim's again. And this time for jio sim also it is not taking the signal. And i contacted adiy customer support from there also i didn't get proper response. So please help me in this sir.
Heyy can u share the code to send and receive sms using this board
Does it support jio sim now?
Hi, Mr. Ravi. I have several question. 1. Does the "LASS" has any significance meaning? 2. Does the module still in production or will discontinued soon? 3. Could you share the A7670C AT command documentation? Hope you can answer my question. Thank you.
Each letter indicates what features it has, like analog audio, gnss, Bluetooth. Find it's datasheet. That module is not going away anytime soon
I think the price is going down, I bought it for just 10$
Which Companies SIM card are used in this GSM Module..?
We used jio and airtel in India.
Can I power the 7670 through the USB? Thank you.
No, it needs to be powered through the adapter
@@RaviPujar Thank you, Ravi, so much. I ordered a 10 volt 2 amp adapter. Can I connect the adapter to Vin and Gnd respectively?
Does it supports DTMF ?
hello team ,
How to use internet using 4G GSM module through Super cheap 4G LTE modem with SIMCOM A7670C.
You can use HTTP or MQTT or TCP using AT commands. Lot of examples are available on youtube.
Hi. What is the diff to SIM7600G-H R2? What sim card do you use?
A7670 or A7672 series are Lower cost compared to SIM7600 series. Smaller in size too. H series is for high speed, CAT 4 data. These are CAT 1 modules
@@RaviPujar you say the A7670 or A7672 series is not for high speed and not good for video streaming stuff? could you use that A7670 or A7672 series with ESP32 and connect it easily?
@RaviPujar thanks for reply. what microcontroller can you connect the board with - raspberry pi zero W or a ESP32? please let me know. also what is the power consumption of the A7670 or A7672 series? im looking for a LTE board which works in the US and in europe.
@@Gerald-iz7mv You can connect to any MCU using UART lines. Power consumption is different in each modes. You need to refer to datasheet. A7670E/A7672E works in Europe. For USA A7670SA might work but it doesnt have certifications needed for USA, So either use SIM7600NA /SIM7600G for USA, or SIM7070G
How to connect with arduino.any library available
Just connect TX, RX, VTRANS, GND and use library like TinyGSM
hello can we use the internet to raspberry pi via qmi interface?
with this module*
@@PratikMane-tm9qe It appears as a USB RNDIS device on computer. But i don't know about QMI interface.
What is the diff vs A7672?
GNSS support mainly.
Is it compatible with arduino uno?
Yes you can connect to it
can u please share the purchase link with us...
www.valetron.com/store/a7670c-4g-lte-cat1-module-development-board/
Hi, I'm working on a project that requires the OpenSDK for the A7670SA module. Do you happen to have a link to SDK?
If so, could you please send it to me? I would really appreciate it.
Hi,
We don't have it. We have A7672S SDK
Hi. Did you get downloaded the A7670 SDK? I'm trying to find it too, but with no success yet.
Does it support M2M sims?
Yes it does
Hello Ravi, is possible to send sms on 4G? Greetings
Yes it's possible
Can you share how can we send sms through this board
¿Puedes explicarme cómo se puede llamar súper barato a un módulo de 20$?
I bought it for just spend 10$😂😂
@@Cheyenne-bv8sm publique un enlace web a este precio, se venden por más
Hi,Ravi, is it support Jio 4G volte sim?
Yes it does
Does jio sim worked on it?
Kitna price hai
www.valetron.com
You can check all version prices here