So So SO VERY PRETTY! PURE WHITE HEARTS With Lovely Pink Blossoms! The Stamping Artwork Thing was Awesome with Silver Stamping/Dusting on it, these Tiny Little Detailing that U do is INCREDIBLE VERY UNIQUE! ONE OF A KIND JEWELLRY! I LOVE IT ABSOLUTELY!
Sei veramente molto brava e fantasiosa. Potresti dirmi il nome della pellicola trasferibile che usi circa alla fine del quinto minuto, così che provo a cercarla su internet?
It would be difficult to do the whole process with 2 part epoxy. You could get the basic earring by filling the mold with the resin and inserting the dried flowers. Then let it cure. It should be possible to apply the white background with two part. Where I see it getting difficult would be in adding the half jump ring to make the loop. So much easier with UV resin. As far as the transfer foil goes, I don't see how that could be done with 2 part. You can apply a UV resin over a cured 2 part epoxy base which is how I would do it.
Yes it could be done but it would,be extremely difficult… mixing up that small amount of 2 part resin is very difficult to get right… UV Resin is much easier to use for small pieces like these….
I would think that epoxy resin would have a very different effect on a stamper head. But...if you have an extra one that you don't mind sacrificing, give it a try. I would expect your stamper head to be ruined, though. Having never tried this technique, I really don't know. Even with UV resin, the stamper head is probably going to be ruined. Since I have lots of extras, I might try it. If you have a honey-comb patterned doming mat, I have noticed that the extra epoxy resin that drips down comes off in a pattern similar to this. You might give that a try? Although Let's Resin has five beautiful metallic colorants. You might be able to play with those between waxed paper, thinning out your epoxy resin, then using a silicone dotting tool to get these shapes?
@@jaykb6587 why would the stamping tool be ruined? It’s made of silicone… but, I think using wax paper or parchment paper to get this effect would work just as well… could even use part of a silicone mat to do the same thing…
Actually, now that I think about it, I do not believe using 2 part epoxy would work… it’s self leveling and it would inherently try to pool itself into one place unlike UV resin that doesn’t do that….
So So SO VERY PRETTY! PURE WHITE HEARTS With Lovely Pink Blossoms! The Stamping Artwork Thing was Awesome with Silver Stamping/Dusting on it, these Tiny Little Detailing that U do is INCREDIBLE VERY UNIQUE! ONE OF A KIND JEWELLRY! I LOVE IT ABSOLUTELY!
Thank you very much for your love, support, and comments. Will keep us moving forward. Glad you enjoying our videos. Great day for you too. 💕
I love learning something new from your work.
You make the most wonderful things!
Beautiful
Stunning
Very beautiful jewelry
仕上がりが本当にキレイ✨
最後の一工夫がいいですね🎵
Bonjour, très jolis bijoux, j’aime beaucoup. A bientôt 💐🇫🇷
Very beautiful ❤️❤️❤️❤️❤️❤️❤️
Another beautiful piece and love the way you did the part with the nail stamper. You are so talented.
Those are really pretty…
Gorgeous!❤❤❤
Lovely 🥰
Gorgeously Beautiful.💖
Those are beautiful earrings ❣❣❣
Very clever! I have learned so much from you.
Magnifique très délicates j 'adore
👏👏
Qué hermosura,es una preciosidad👏👏👏👏👏😘😘😘😘
Excellent! 😍
Beautiful.. I keep saying I'm going to try making one of your earring design out of paper mache. I think I will try this one.
👏👏👏WooooW😍
Очень красивые сердца.
🤗🌞👏
Sei veramente molto brava e fantasiosa.
Potresti dirmi il nome della pellicola trasferibile che usi circa alla fine del quinto minuto, così che provo a cercarla su internet?
Alguién sabe el nombre de la planta que usan en este video?
Can I do the same using epoxy resin , plz answer me, its important, I m a jewelry maker
It would be difficult to do the whole process with 2 part epoxy. You could get the basic earring by filling the mold with the resin and inserting the dried flowers. Then let it cure. It should be possible to apply the white background with two part. Where I see it getting difficult would be in adding the half jump ring to make the loop. So much easier with UV resin. As far as the transfer foil goes, I don't see how that could be done with 2 part. You can apply a UV resin over a cured 2 part epoxy base which is how I would do it.
Yes it could be done but it would,be extremely difficult… mixing up that small amount of 2 part resin is very difficult to get right… UV Resin is much easier to use for small pieces like these….
I would think that epoxy resin would have a very different effect on a stamper head. But...if you have an extra one that you don't mind sacrificing, give it a try. I would expect your stamper head to be ruined, though. Having never tried this technique, I really don't know. Even with UV resin, the stamper head is probably going to be ruined. Since I have lots of extras, I might try it. If you have a honey-comb patterned doming mat, I have noticed that the extra epoxy resin that drips down comes off in a pattern similar to this. You might give that a try? Although Let's Resin has five beautiful metallic colorants. You might be able to play with those between waxed paper, thinning out your epoxy resin, then using a silicone dotting tool to get these shapes?
@@jaykb6587 why would the stamping tool be ruined? It’s made of silicone… but, I think using wax paper or parchment paper to get this effect would work just as well… could even use part of a silicone mat to do the same thing…
Actually, now that I think about it, I do not believe using 2 part epoxy would work… it’s self leveling and it would inherently try to pool itself into one place unlike UV resin that doesn’t do that….
I'd think the stamper head would be ruined after using it like this. If you don't have extras, I wouldn't want to try this.