I might me to late to answer that question, but I used a 3 inch cut off tool and cut a circle in the middle of the ring crossing thru all the little slots, then I pry the inside of the ring out, then after removing the center, remove the outside ring away from the outside hole and pry it towards the inside. I used an aftermarket ring nozzle and ring, and the ring was to big to go inside, so I grinded the ends of the ring slightly and it went in.
I see how you put in. Can you make a video on how to take out the old one? Thank you.
i'd like to know this too
You need an special extractor to remove the nozzle. You have to pull and twist it at the same time so the ring closes and snaps out of the grove.
turbopioneer check put turbo labs...he changed one in a video...basically he used a die grinder with a cut off wheel.
No
I might me to late to answer that question, but I used a 3 inch cut off tool and cut a circle in the middle of the ring crossing thru all the little slots, then I pry the inside of the ring out, then after removing the center, remove the outside ring away from the outside hole and pry it towards the inside. I used an aftermarket ring nozzle and ring, and the ring was to big to go inside, so I grinded the ends of the ring slightly and it went in.
Cómo quitar esa pieza..