Thanks! Honestly, I don't know since I bought it from the shop as a rim set. There's no one-size-fits-all length for spokes. It is still dependent on the rim depth and hub flange.
bro i found this frame bike on Shopee and i'd plan to chekout but dont know whether there's other using this bike frame but since i saw you use this frame so i'll checkout then. ps: what you think level up frame to compare with tsunami sn100 frame? which one would you pick?.🤔😅hand-purple-blue-peace
Level UP GB001 and Tsunami SNM100 are very similar frames, except that the SNM100 can be bought as a frameset (frame and fork). Not sure if there are shops selling the GB001 paired with a fork now. How does that affect the bike? Since the SNM100 comes as a frame set, it’s geometry is set particularly the offset/rake. The GB001 will change depending on the fork you will use with it.
@@CustomBuildsYTThere are shop that sell with a fork, I wonder is the geometry sloopy because of its build like that or the fork make it sloopy. Lastly what frame size is that?
When you say bottom bracket size, do you mean shell size or spindle length? If it’s shell size, that’s usually a 68mm for your run of the mill frameset. You can also use a caliper to measure the bottom bracket area of your frame. Best way to know spindle length is to check the specs allowed/required by your frame and crankset. Usually, it’s any of the three sizes: 103mm, 107mm, or 110mm. There’s some leeway in choosing the spindle length and the resulting chain line. As long as you’re within 2-3mm of what’s needed, you’ll be fine. The possible issue with going for a shorter spindle is frame clearance-either your chainring or your crank arm hitting the frame.
Around 25k yung gastos namin sa build na ito. Kaya siguro siguro with 2nd hand parts. Frameset alone costs 9.5k (ka-presyo halos ng Tsunami SNM100). Ang next na component na medyo mahal will be rim set. Yung Arrow, 4-4.5k na. 13.5k na kagad yan.
Okay naman na entry level alu frame itong GB001 model nila. Pareho lang halos ng Tsunami SNM100 sa quality. For me, mas maganda disenyo nitong Level Up. Kakaiba yung makinang yung decals.
@@CustomBuildsYT yung sa tensioner nya Boss dun ako bumilib eh. Yung snm4130 meron tas yung snm100 waley. 😅 Boss gumamit ka na ba nung MOB fix8 na hubs? Ok kaya yun? Balak ko sanang gamitin eh tas TB14 kung mapagkakasya ko pa budget. 😉
@@CustomBuildsYT nagbabalak na kasi akong kumuha/magpabuo ng rimset Boss eh. Iniisip ko may mga under 10K na rimset na pwede na rin or buo na lang ng H Plus Son TB14 na naka MOB Fix8(problema ko anong size ng spokes dapat para dito Boss). Medyo may kabigatan po kasi Boss eh kaya naga-alangan ako dun sa Arrow at Legend rimsets.
In fairness sa Arrow at Legend rimsets, capable naman sila. Kung heavier rider po kayo, I suggest go for higher spoke count (ie. 32 or 36 spokes). Solid na rims yung TB14. Mas magaan din ng onti kasi lower profile siya. When it comes to spoke length, hindi po iyan one-size-fits-all. Based po kasi yan sa rim depth at hub flange. I suggest you bring it to your local bike shop para masukat nila.
I'm not too sure of its availability on Ali Express since I don't use that platform. However, this frameset is relatively new to the Philippine market. I wouldn't be surprised if it's there too.
What was the size of spokes being used for VP 50mm? Thaanks! Nice build btw.
Thanks! Honestly, I don't know since I bought it from the shop as a rim set. There's no one-size-fits-all length for spokes. It is still dependent on the rim depth and hub flange.
Update: I took a ruler and measured the spokes in this particular rim and hub combo. It's 270mm.
Thanks for the update!
Which manufacturer produce this level up frame? I didn't find any source.
It’s likely that it’s from a Chinese manufacturer. You can see the frame set being sold widely on Aliexpress.
May I ask what bottom bracket is used? Planning to change my skeace ob bb.
Hi! I used a Shimano BB-RS500 (Sora) bottom bracket here.
Alin po ang mas magaan? level up gb001 or tsunami snm100?
nice build, bar tape looks kinda loose though
Thanks for the concern. I can assure you we wrapped it up tight enough just before it tore apart.
slope ba to sir?
No, Sir. Staright top tube.
Sweet build. What’s the crankset?
The crankset is Skeace Outboard. Entry-level cranksets from China. If paired with a decent bottom bracket, it should work well.
bro i found this frame bike on Shopee and i'd plan to chekout but dont know whether there's other using this bike frame but since i saw you use this frame so i'll checkout then. ps: what you think level up frame to compare with tsunami sn100 frame? which one would you pick?.🤔😅hand-purple-blue-peace
Level UP GB001 and Tsunami SNM100 are very similar frames, except that the SNM100 can be bought as a frameset (frame and fork). Not sure if there are shops selling the GB001 paired with a fork now.
How does that affect the bike? Since the SNM100 comes as a frame set, it’s geometry is set particularly the offset/rake. The GB001 will change depending on the fork you will use with it.
@@CustomBuildsYTThere are shop that sell with a fork, I wonder is the geometry sloopy because of its build like that or the fork make it sloopy. Lastly what frame size is that?
@flavour9117 The frame in this video is a size 52. Its geometry is a bit sloped.
May I ask, what's the max tire clearance of celt frame?
Manufacturer spec says 700x28c, but people have fit up to 32c tires on it.
Waaaaw 🍊🍊🍊
fit po kaya 28c dito?
just subscribed, saw you from facebook!
Salamat! 🙇🏽♂️
steel frame?
6061 Aluminum Alloy frame.
boss pede din bayang lagyan ng short reach rear brake?
Yes, puwede po siyang lagyan ng brakes.
Ask ko Lang yung sa Bearing po ba eh perfectly fit po ba yan from top to bottom hnd ba naka paleng?
Magfi-fit po siya ng deretso kasi kasama po sa headset yun ring para ma-center yung steerer tube sa headtube. Maikakabit po siya ng tama
Ano pong fork yun gainamit nyo? Kasama na sa frame or binili mo po?
Tsunami Alu fork. Frame lang yung Level Up GB001 nung una siyang lumabas sa market sa Pilipinas. Ngayon may frameset na.
Weight?
It came in at 7.26 kg, with the pedals.
@@CustomBuildsYT yung sa tsunami snm4130 gaano po kabigat whole bike?
Umabot ng 9.7 kg yung Tsunami 4130 na green.
Slope ba sya boss ?
Mas neutral/horizontal ang geometry nito rather than slope.
anong bb yun boss?
Hi! Shimano BB-RS500. Tiagra-level na Hollow Tech II bottom bracket.
Idol safe lang ba yung fork na lvl up sa tsunami snm100?
Okay lang Sir. Bantayan niyo lang yung Level Up kasi pang tracklocross yun. Di hamak mas malaki clearance nun kaysa sa frame ng Tsunami SNM100
Napapasukan ba ng 32c ang tsunami frame?
From what I know Sir, hanggang 28c lang ang kaya ng SNM100.
Idle anung size Ng frame mo and straight gio ba sya o slope ?
This build used a size 52 frame set. It has a slight slope, almost neutral/straight geometry.
Mataas na ba sir Ang size 55 para sa gagsmit na 5"4 lang Ang hight ?
@mervievillafuerte9769 Yes, malaki na po yan.
flat frame po ba yan or slope???
Slight slope, halos straight na yung top tube.
If its square tapered crankset that I'll use, what bottom bracket size that'll fit perfectly?
When you say bottom bracket size, do you mean shell size or spindle length? If it’s shell size, that’s usually a 68mm for your run of the mill frameset. You can also use a caliper to measure the bottom bracket area of your frame.
Best way to know spindle length is to check the specs allowed/required by your frame and crankset. Usually, it’s any of the three sizes: 103mm, 107mm, or 110mm. There’s some leeway in choosing the spindle length and the resulting chain line. As long as you’re within 2-3mm of what’s needed, you’ll be fine. The possible issue with going for a shorter spindle is frame clearance-either your chainring or your crank arm hitting the frame.
@@CustomBuildsYTCan be installed in 107mm size
@@CustomBuildsYTIs there a more suitable size 103mm, 107mm or 110mm. Can you recommend
107mm is commonly used.
magkano budget? tsaka makakabuo kaya ako ng wb sa 13-15k budget gamit gantong frame?
Around 25k yung gastos namin sa build na ito. Kaya siguro siguro with 2nd hand parts. Frameset alone costs 9.5k (ka-presyo halos ng Tsunami SNM100). Ang next na component na medyo mahal will be rim set. Yung Arrow, 4-4.5k na. 13.5k na kagad yan.
Ayos ba level up frames lods? Muntik na ako mapabili nyan eh. Pero yung snm100 naorder ko kasi nakuha ko ng ₱8500. 😅
Okay naman na entry level alu frame itong GB001 model nila. Pareho lang halos ng Tsunami SNM100 sa quality. For me, mas maganda disenyo nitong Level Up. Kakaiba yung makinang yung decals.
@@CustomBuildsYT yung sa tensioner nya Boss dun ako bumilib eh. Yung snm4130 meron tas yung snm100 waley. 😅
Boss gumamit ka na ba nung MOB fix8 na hubs? Ok kaya yun? Balak ko sanang gamitin eh tas TB14 kung mapagkakasya ko pa budget. 😉
Oo, may built it tensioner na itong Level Up GB001.
Di ko pa na-try yan hubs na yan. Sa pagkakaalam ko, sealed bearing hubs naman na yan.
@@CustomBuildsYT nagbabalak na kasi akong kumuha/magpabuo ng rimset Boss eh. Iniisip ko may mga under 10K na rimset na pwede na rin or buo na lang ng H Plus Son TB14 na naka MOB Fix8(problema ko anong size ng spokes dapat para dito Boss). Medyo may kabigatan po kasi Boss eh kaya naga-alangan ako dun sa Arrow at Legend rimsets.
In fairness sa Arrow at Legend rimsets, capable naman sila. Kung heavier rider po kayo, I suggest go for higher spoke count (ie. 32 or 36 spokes). Solid na rims yung TB14. Mas magaan din ng onti kasi lower profile siya.
When it comes to spoke length, hindi po iyan one-size-fits-all. Based po kasi yan sa rim depth at hub flange. I suggest you bring it to your local bike shop para masukat nila.
is this the same frame on ali express?
I'm not too sure of its availability on Ali Express since I don't use that platform. However, this frameset is relatively new to the Philippine market. I wouldn't be surprised if it's there too.
@@CustomBuildsYT Do you think its real then? cuz i found it on aliex and im from the u.s
It's a legit frameset. I didn't see any QA issues with the one we assembled. And it was pretty easy to build around.
Hm ganyan frameset
Around Php 9.5k total, depende sa store. Total kasi magkahiwalay niyo ponh mabibili ang frame at fork.
Tire max clearance boss??
700x25c ang manufacturer stated tire clearance for the frame and fork.
hm ganyang build?
Gumastos kami ng around Php 25k for this build.
Try to build pizz cartoon picker
We're considering that too! I've seen a few since it's relatively new in the Philippine market. Thank you for the suggestion.
@@CustomBuildsYT review that frame tho
Thankyou
Sana meron kading magawa na Level Up GB002 Balak ko kasi mag build nun kuha lang ako build idea sayu hehe
Salamat sa suggestion! I-try po namin sa mga susunod na video.