JK Designs Orca Clone, How Does It Compare? Balisong (Butterfly Knife) Comparison And Review
Вставка
- Опубліковано 23 сер 2024
- yep
also, yes, song at end
Track: Lost Sky - Fearless pt.II (feat. Chris Linton) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Lost Sky - Fearless pt...
Free Download / Stream: ncs.io/Fearless2YO
Miatas and balisongs.. sounds like a vibe!
your editing is so fucking funny been watching u for a very long time and the videos get better and better everytime
I appreciate it man 👌
If none of them feel like i'm flipping a coffee table then I DON'T WANT EM😤
fine then Mr DENDENBMX don't get em then 😤😤😤
P.S. I refuse to believe that your first name is Den, middle name Den, and last name BMX, there's no fucking way, tell your viewers the truth
Wtf is that ending I just sat there in terror as funny knife review man throwed a fucking orca on the ground
it's the good ending
they are wider in terms of wide.. holy fuck i love this channel
im not, wrong
Love how he just gets straight to da point
Your reviews are the best out of all the Bali content
I appreciate it, I try and keep it as real as possible, no bias no bullshit, especially in this one, as I really don't like Julian, and I really wanted to say the clone was better than the real deal, like the barebones clone and triton clone. but I don't want my bias getting in the way of what is, as best as I can, the objectively better Bali. of course I throw my opinion in at the end, but that's after the specs and objective views.
@@DJEyelessPyro now begs the question, why don’t you like Julian, unless you already stated why and I didn’t see it.
@@freesoup9673 his attitude, his prices, his manipulation of market, firm grip on collaborations, supreme of the Bali community
@@DJEyelessPyro totally agree with you
@@DJEyelessPyrowhich barebones? The alu, ss or ti?
Lmao love your chaotic energy dude, will definitely become a frequent watcher
Also the day that good Arc Angel and kono clones come out I’ll die happy cause fuck paying over 1k for those
appreciate it man, and 1000% agreed, except konos, konos just arnt good flippers
@@DJEyelessPyro they’re good imo, even if pretty handle heavy but I’d probably get someone to mill the spacers a bit in that case
@@masterbeishline542 I just wouldn't get a Bali for that much money, especially if it can't flip good lmao
There was so much effort put into this video and it’s fucking hilarious 11/10 hood review.
Dude the switch to the discord call had me dieing
lmao, it was one of the funniest parts imo, we did both of the calls first take btw
Man I literally love that 0'5 sec memes hahahahahah salutations from Spain!
i love waching your videos in the morning
I'm waiting for my live blade orca clone to come in the mail rn, it made it thru customs yesterday so thank fuck cause I been waiting forever for them to drop the live blade version.
Nice bro I just ordered a Orca a Monarch a BRS CHAB and a BRS Replicant a week ago and can't wait! All are live blade clones I hope they are able to be tuned and function pretty well!
@@kj908studio I have all those and yes they are able to be tuned to sound super bouncy. You probably won't have to tune the chab or monarch, but more than likely you'll have to tune the rep, but it's easy, just get some 800-1,000 grit sandpaper, and be prepared for it to take about a hour..
@@HDUnfatalLife Thanks for the info I am super excited now! ah ok I used my drimmel to polish my bushings on my maxace pian is that what your talking about with the sandpaper?
thank again your friend for letting you review it and tell his name to us 👍
Where did you get it
Day one in Bro you got me hooked here for more than the blades HAHAH
where should I get the replacement hardware for the channel orca clone?
BRO THE MIATA!!!🥵
The pink orca is real or a clone? Who do I need to screw to get one of those? Just send the link to buy it, maybe it’s a better idea. By the way you are a really good flipper, I need to learn to be like that so that I can scare people.
I said multiple times the pink one was real, I'm not sending links, thanks, been flipping for a while, bad reason to want to get better
@@DJEyelessPyro I was joking about scaring people I imagined you would understand. Why not send links? I’m just asking because I don’t know where to buy them.
@@Morcego538 I had a feeling, but remember, I get some, interesting, comments to say the least, regarding why I don't send links, I have a guide video on how to buy balis on aliexpress, and it's better for people to learn how to do it themselves
did the blade hit the channel ever since you started flipping it or did it start after you beat it for a bit?
i didnt beat it at all lol, it was out of box
0:10 Miata crash foreshadow ????!💀
Based killua
Yay ITs HERE!
you should make a vid of that whip
I've made 2 vids on the Miata lol
Hi man, like your stuff that you make on UA-cam, can I have a question? What about kershaw lucha clone from Aliexpress, are you planning to make a review on it?
im prob not going to make a video on it, not substantial
@@DJEyelessPyro ok, thanks for reply 👍
Yo nice miata is it manual? And is it the japanese version?
obviously, 5 speed, and if you mean right hand drive, no
Last 30 seconds of the video is why I don’t lend my knives out… if you want to sell it I’ll give you a half fucked chicken…
lmao
Honestly big fan of editing
tyty, chaos
the guy who let you borrow his orca might attempt murder after that flipping montage
funny enough, both of us thought it was going to be a great ending, and we both knew people were going to hate it
@@DJEyelessPyro And they did, we hate the montage. It causes physical pain.
@@ryderflips7287 all according to plan
“…. So is that a yes?”
😆 💀
to what?
@@DJEyelessPyro my bad, no quotes. It’s your line from the vid
@@casey4415 ah, sorry my brain slow
What would you say the better purchase would be, this or a Chab clone?
depends on your preferences
Hey man I got glidr OG from armed shark. Do you know those screws are same on orcas? What is it m2. 5 u sure?
I'm not 100% sure but I'm pretty sure it's m2.5
bro i love this editing
tyty
If one of my orca handles is stiff no matter what I do is that over/undersized washers? Or is the blade not flat?
you might have to bend the pivot area on your handle, it might be binding due to the handle, not the pivots, if it's binding without you tightening super hard then it's either the handle, or washers are too thick
3:21 im in the video🤓
That discord call was chaos
fantastic*
Is the channel orca or the alien better? Dissrigard the price. In you opinion.
those are 2 completely different balis, not even close to similar, can't really compare the 2, but I guess channel orca?
@@DJEyelessPyro ok thanks
Literally the only pink orca I know is saucy’s
nope, not a chance
Where did you get it from?
This was hilarious 😂 I gotta hop on discord with you and play some cs🤣
U funny as shit my dude
lol, thanks
15:44 this is why I watch your content. I think I'll get the channeled orca for a beater, handle gap will go bye-bye though. Oh, and your epic flipping montage made me consider suicide.
I have the same opionion
👌
@@AidenRedmon28 opinion*
@@cwlter4223 thanks💀
1:05 just a regular old 42 springer T latch. Doesn't exist mate but you know that you just meant to say serrated. It's a 42s T latch and the first one with bushings is a 42s springer
man, i just redditor'd
@@DJEyelessPyro eh I wouldn't worry about it, people know what you mean, I'm basically just an ass pointing it out
@@Nik-Dybdahl hey, considering all my videos are off the cuff, it was only a matter of time before ONE slipup happened lmao
@@DJEyelessPyro yeah and it's a real small one, so you're good man. Thanks for doing a review on the orcas btw. Was considering getting one but was oddly enough also considering getting a 42s T-latch or 47. I think I'll pass on the orcas honestly.
Hey dude quick question: TheOne 47 vs. baliplus 47 springer vs. Baliplus 47 T-latch. Saw on your IG you got a T-latch 47. I've been wanting to get a baliplus 47 T-latch but I have also been told to avoid the T-latch and get the springer instead because the handles are too light with the 47. I already have a theone AA47 and I'm pretty happy with the balance of that.
New orca, it’s bushing too…
So what should we replace the hardware with
ok, i assume you mean what size, im pretty sure theyre m2.5 x 5mm, but im not 100% sure, waiting to see if im right
@@DJEyelessPyro I mean you said replace these right away... But I don't know what is good hardware to use as am new to balisongs and will be ordering the channel orca in the next week or so... I've got theone falcon for now and a kraken v2 on the way
@@weesupersteve any hardware that isnt stock that fits is good hardware
INITIAL D REFERENCE LUV IT!!
initial d is the shit
@@DJEyelessPyro born in 07 and luv it!
@@THEGHOSTEDITS cant be too old or young to love initial d, no reason not to love it
@@DJEyelessPyro exactlyy
the editing is so funny
chab and orcal all clone whaat which best ?
no such thing
finnalyy
guys this is what fucking happens when you annoy him to make certain videos hes gone so deranged hes making montages of dropping grail knives now
I'll fucking do it again
dude gets bit and just ignores it… what a legend.
lmao, I barely feel cuts anymore
I heard that armed shark puts out garbage… can you comment on that?
disagreed entirely, just their clone choices are sometimes garbage
where does one find replacement screws?
m2.5 x 5mm
@@DJEyelessPyro I have those but the heads are body screw size, can u send a link? can’t find any that are the right size
@@33kappa1 the heads on the orca clone are pretty tiny, trust me, theyll prob fit
@@DJEyelessPyro Does the screw bit matter? like if I decided to buy phillips head m2.5 x 5mm pivot screws, would they still work in the orca or no? Also, where could I find the screws with the male and female parts? I could not find one. Are the screws you can buy from slash2gash good or not, If you know that is.
Wierd that mine does have nearly as much tolerance problems
screws were also stripped to shit as said in the video
Yo where can I get replacement hardware?
didn't need to comment twice
@@DJEyelessPyro hehehe my bad 😅😅😅
so it's not better than the chab clone?
depends on what youre looking for, as i said, its preference based
@@DJEyelessPyro alt chab clone is my reference point I really enjoy it, looking for a clear 'step above' it and/or a trainer that flips comparably.
LMAO wait you actually threw travis's orca last vid?
WAIT NO NOT ON CONCRETE 😂
I absolutely love these edited videos. Keep it up!
But swearing is annoying
appreciated, but idk how that's annoying, just speech
just words. Humans give negative connotation or meaning to them
@@DJEyelessPyro When your a person which doesn't swear or in a family that doesn't want to hear people swearing, it's annoying
Oooohhh where did the clone come from?
same place you get every other clone, aliexpress
How does your orca have such bad tolerance 😂. Mine is almost perfect and it's definitely not a safe queen.
proper beater, it was beat before the ceracoat, so there's a lot of damage that isn't showing
Can someone give me the screw measurements for the channel please 🙏
pretty sure they're m2.5 x 5mm, but I'm not 1000% sure
Where can I find spare hardware
nrb hardware guide
Are the screws the same as the replicant pivot screws.
@@trempton9013 ok this is why I put the information in the video, yes you put real Replicant hardware, if you're doing the pivots you have to do everything, pivots washers bushings
Okay thank you for the help.
So the orca clone hardware has the same washers, pivots, and pivot screws as the BRS replicant
17:02 what sloppy at modding does with her customers knives.
lmao
:( the ending
:) the ending
*LINK*