ULTIMATE COOL Studio Music Desk (Part 2/4)
Вставка
- Опубліковано 10 вер 2024
- I show you, in detail how to build a very expensive looking home studio music production desk for under $500 US Dollars.
Part 2 of 4
Part 1: • ULTIMATE COOL Studio M...
Part 3: • ULTIMATE COOL Studio M...
Part 4: • ULTIMATE COOL Studio M...
If you are interested in any of the tools or bits I use in this video links are below
Main Circular Saw with Guide Rail: goo.gl/CGM1wF
Chop Saw: goo.gl/wSQYb8
Jig Saw: goo.gl/3bpRAR
Drill / Screw Driver: goo.gl/4dLt3w
Router: goo.gl/Dp8rNW
Sander: goo.gl/xbYQz3
Pilot bit set: goo.gl/ks49Cj
Counter Sink Bit set: goo.gl/zkf1NH
50mm Screws: goo.gl/USdVUS
12mm Screws: goo.gl/XGs6z5
Digital Angle Finder 200mm Long (The One I should have bought) goo.gl/k68TJv
Carpenters Set Square/Combination Square: goo.gl/t4JFzd
Spirit Level Stabilia goo.gl/PkgLK2
Clamps: goo.gl/29Qrsv
180 Grade Sand Paper: goo.gl/ZhQ4sm
Dark Oak Stain: goo.gl/4QYTqi
Furniture Finishing Wax: goo.gl/dXNKA6
My Worktops (eBay Germany links) goo.gl/733GvD
Racks Rails: goo.gl/pUKgfF
Rack Blanking Plates 4u: goo.gl/255hAq
Rack Blanking Plates 1u: goo.gl/Vp7iU5
Rack Screws: goo.gl/uYZvpb
thanks for making me realize to pre drill all before assembly
Your desk came out fantastic! Very happy you made this and I was lucky enough to come across it. Just what I needed. Thanks so much for spending some extra time helping others be able to save thousands on a desk and actually get the work surfaces we are looking for. Nothing works like custom built for you, and those cost a small fortune to have someone else build for you.
This build is great. Although to make your life easier you can use wood screws which have a non threaded section under the screw head which claps the 2 pieces t together
Very informative, might have a go at a custom embedded keybed desk at some point. I would recommend torx screws by the way, philips are more difficult to work with as the drillhead keeps slipping off of them.
Now that you had it the hard way, I'll mark and pre-drill all the screw points beforehand.
awesome build. Do you have the paperwork drawn out or this?
I really liked the design, until I realized that if you used a large display that there would be no integrated space for audio monitors (taken up by the rack areas). I think I’d like to borrow part of that design with a shelf above for display/audio monitors
Good point... I use two side-by-side displays also. So no room for audio monitors. Even with the shelf as you suggest, the shelves would cover up the site line to the rack gear. Not sure how I'd do this...
Nice design! You need to be a bit more careful with your drilling - the way you drilled the ends @6.30 is a nice way to drill into your hand. One of the golden rules of woodwork is not to have anything (especially hands) in front of a sharp tool!
Were you happy with the width measurement of 490mm/49cm seams a bit too wide as most of my reach gear is 482mm 48.2cm ?
10:21 Drills his leg
nice build, but I miss a good space to put on my monitor, so for me iets not perfect.