How to Remove Radio / Multimedia / Navigation / Display from Audi A8 2012 for Repair.

Поділитися
Вставка
  • Опубліковано 2 січ 2017
  • VISIT OUR WEBSITE: www.hitechserv.com/
    GIVE US A CALL: 818-785-8085
    ADDRESS:
    Hi-Tech Electronic Services
    7049 Valjean Ave.
    Van Nuys, CA 91406
    FACEBOOK: / 228369687196264
    We repair all major radios and navigation systems! You can even ship us your broken radio / navigation unit if you're not local! That's right, we welcome worldwide customers.
    Now if this video helped you, please give us a thumbs up!
    If you would like to get notified for our latest videos click subscribe!
    Thanks for watching
    Removal and Installation of Audi A8 Radio, Multimedia, Navigation, Display, Year 2010, 2011, 2012, 2013, 2014, 2015, 2016 for repair.
  • Авто та транспорт

КОМЕНТАРІ • 34

  • @antonvalchev1433
    @antonvalchev1433 4 роки тому

    A big thank you 👍

  • @JuanPerez-yy5hr
    @JuanPerez-yy5hr 7 років тому +2

    Nice video and info
    Keep it up

  • @badboyxx99
    @badboyxx99 5 років тому +1

    Nice video sir. I need to know I have 2013 Audi A8 and I wanted to install a fakra antenna behind the multimedia. So where do the fakra antenna connect goes into the multimedia player or behind the monitor screen?

  • @hashim_iraq
    @hashim_iraq Рік тому

    Thank you

  • @brentmbyers
    @brentmbyers 11 місяців тому

    Great video. My issue is that my display will not go up. I have done the reset and I have checked the fuse. When I get to the step where the MMI needs to come out of the dash, it will not, because I cannot raise it up. Is there a way to get around this? Can I manually raise it? I assume a wire to the motor is broken. Is that common in D4? THANKS!!!!!

  • @legwent
    @legwent 4 роки тому

    Thank u

  • @peterharris73
    @peterharris73 5 років тому

    I got all the way following this video and found one wire is broken right at the connection to the bottom of the MMI screen. The wiring bundle is very short and I can't pull the MMI unit out more than a few centimeters so very difficult access to try soldering. How to release the wiring bundle to allow the MMI unit to come further out of the dash?

  • @smity9089
    @smity9089 5 місяців тому

    Hello, my mmi screen wont retract back and is very loose. Im thinking it has something to do with gears slipping. Do you have a video showing how to teplace the gears for the mmi screen for 13 audi a8?

  • @navneetshivalkar5442
    @navneetshivalkar5442 3 роки тому

    Hi I am trying to open it and the black AC trim is stuck with two smal plastic locks which are very hard to pull is their a technique for that..??

  • @maziarkarimi2195
    @maziarkarimi2195 Рік тому

    مرسی

  • @stephencannon3140
    @stephencannon3140 4 роки тому

    Do you have replacement display screens? My screen works but stuck open. I can hear the motor running but screen will not retract even with a factory reset. I suspect Screen motor but probably figuring easier and cheaper in the long run to just R/R the entire display screen.

  • @mrradman2986
    @mrradman2986 5 років тому

    Thats very helpful. My display intermittently flickers out but otherwise the systems work normally so I think it is the power supply to the screen which is faulty. Is that the yellow cables?

    • @HiTechElectronic
      @HiTechElectronic  5 років тому

      To fix the issue please click on this link: ua-cam.com/video/10XpkiWIE4o/v-deo.html

  • @legwent
    @legwent 4 роки тому

    Do u know if you have to program new Mmi unit if it’s the exact part number

    • @HiTechElectronic
      @HiTechElectronic  4 роки тому

      Monitor does not need programming but Multi Media player requires programming even with the same part number.

  • @vbBegin1957
    @vbBegin1957 5 років тому

    Hi do u have a video removing the cup holder to replace the bulb 2015 Audi A8

  • @biboharris679
    @biboharris679 4 роки тому

    My display tries to open but it clicks and won’t go all the way up or all the way down. Almost like it’s off the track or grinding the gears?

  • @kb-ksb
    @kb-ksb 6 років тому

    hi do you have a video of how to remove the center console for the same car?

  • @ARCACIACAFE
    @ARCACIACAFE 6 років тому

    Hi dear how to remove back screen please

  • @WellaPain
    @WellaPain 5 років тому

    Thank for this !!!

  • @injektor701
    @injektor701 6 років тому +2

    My display power up for I little bit when it goes out and then goes dark when it's fully up. I know it cable but which one?can you help me with this?

    • @HiTechElectronic
      @HiTechElectronic  6 років тому

      Check the flat cable for the power and it has only 2 or 3 of wires.

    • @toddlokash7865
      @toddlokash7865 5 років тому +2

      Did you get this repaired? I have the same issue as of last night.

    • @ao2goro
      @ao2goro 2 роки тому

      Same problem....i see is quite common problem.

  • @smokeandlisten
    @smokeandlisten 6 років тому

    Who can help me with smth i this car?

  • @Irfanawan
    @Irfanawan 3 роки тому +1

    How to repair clicking sound while closing the display.

    • @smity9089
      @smity9089 5 місяців тому

      Hey, did you ever get this issue taken care of? Mine is doing the same thing and sounds like gears are slipping. Upon endless research, I figured out that it may be the plastice factory gear that may be worn but unsure.

  • @swofford44
    @swofford44 27 днів тому

    Worst Video Ever, there are 3 bolts from the Back of the Black Trim that can only be accessed with the Glove Box Removed prying the trim out broken them and the new trim is 600.00, there must be a reason they showed the video with all the fasteners and trim already removed because they broke all the hardware as well