How to Install a Spiegler Front & Rear Brake Line Kit on a Yamaha YZF-R6 from Sportbiketrackgear.com

Поділитися
Вставка
  • Опубліковано 10 вер 2024
  • How to Install a Spiegler Front & Rear Brake Line Kit on a Yamaha YZF-R6
    www.sportbiketr...
    Replacing the rubber rear brake line with stainless steel lines is one of the "Best Bang for the Buck" modifications you can make to your motorcycle. You will realize the benefits of the stainless braided lines on the first ride you take after installation. Spiegler's patented stainless steel braided brake lines eliminate expansion under the most severe applications. Even under extreme pressure the lever feel remains consistent. Replace your old rubber OEM brake lines today and enjoy the security of a lifetime warranty with Spiegler braided brake lines.
    The tools seen in this video can be found at www.sportbiketr...
    If you feel uncomfortable with this modification please take your bike to a licensed motorcycle mechanic. Stay tuned for more installation videos!
    Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to orders@SportbikeTrackGear.com or leave a comment. Don't forget to subscribe!
    / sportbiketrackgear
    / stg_moto
    / stg_moto
    blog.sportbike...
  • Авто та транспорт

КОМЕНТАРІ • 97

  • @Nceb
    @Nceb 4 роки тому +4

    Bought those brake lines, and new EBC brake pads from your website, and installed them onto my 2007 Yamaha FZ1. Afterwards, I went out for a slow, careful ride, because freshly installed brake pads requires a break-in period before they bite onto the rotor.
    After riding for 10-15 miles and gently riding the brake pads, I can confidently say the new brake lines and brake pads are so much better than stock. Every 4 years, one should replace their stock rubber brake lines. But if you purchase these stainless steel braided brake lines, they’re good for life of the bike. Install and forget it about.

  • @e.carrillo1948
    @e.carrillo1948 4 роки тому +2

    I was thinking of doing this myself. But I don’t have the patience to do so in this kind of project. I will be sending my R6 to a pro shop. Everything else. I’ll take care of. Thanks for posting videos like this guy! Great work!

  • @aquaclean
    @aquaclean 5 років тому +2

    I cant install spiegler break lines on 2005 kawasaki 636, there is a stopper on the bike ( behind the break line) so I can turn the break line that way the break lever can work free cuz the break lever has a hard plastic stopper on the back that stoop on the line. Can some body help me please

  • @TennRides
    @TennRides 3 роки тому +2

    Beautiful bike.

  • @Seve7cypherZ
    @Seve7cypherZ 5 років тому

    hey thanks alot my bro nothing worked till i watched your video who ever learns under you will be a majstro

  • @XloMotion
    @XloMotion 8 років тому +1

    Thanks for the tip about the zip tie on the brake lever. I usually bleed the Mc last to get whatever air you have in the system out.

  • @Stripping_Bolts
    @Stripping_Bolts 2 роки тому +1

    My heart dropped at 9:30, looks like you broke the banjo bolt
    Don't ask me how I know 😂

    • @sportbiketrackgear
      @sportbiketrackgear  2 роки тому

      Banjo bolt did not brake and the lines are still in service. From time to time the banjo will grab a little hard before it is fully tight then release suddenly a bit. Good to go. - Van

  • @pabloreynoso6409
    @pabloreynoso6409 8 років тому +6

    Love those how to vids on the R6. Hope you can make more. Keep them coming!👍

  • @wyzedefr6549
    @wyzedefr6549 7 років тому +13

    I thought the front lines were suppose to route behind the front forks? is this done right?

    • @itsMC411
      @itsMC411 6 років тому +3

      WyZedEf R6 Depends on the kit, some go in front, others go behind. The one that goes in front is Spiegler Rennsport kit

    • @sportbiketrackgear
      @sportbiketrackgear  5 років тому +3

      From brand to brand routing of the lines will vary, this kit is routed the way it was designed to be. - Van

    • @jacobhendrickson8935
      @jacobhendrickson8935 Рік тому

      @@itsMC411so prefer the rennsport kit myself.

  • @mehdimirza8777
    @mehdimirza8777 Рік тому +1

    Excellent Explanation good service and well done 👍

    • @sportbiketrackgear
      @sportbiketrackgear  Рік тому

      Happy to hear it was helpful and thank you for watching! - Van

  • @josephjohnson9698
    @josephjohnson9698 8 років тому +3

    You make excellent how to videos 👍🏾

  • @Stripping_Bolts
    @Stripping_Bolts 2 роки тому +2

    Why don't you use vacuum to get air out the lines instead of pumping?
    I'm installing these, HH EBC pads, and new rotors front and back on my 02 r6 tomorrow

    • @sportbiketrackgear
      @sportbiketrackgear  2 роки тому

      I prefer to use the tools most riders would have in the shop in place of ones that are far less common. - Van

  • @jacobhendrickson8935
    @jacobhendrickson8935 Рік тому +1

    18:34 Hey Brian, on the master why tighten the top first?? I’ve always done them evenly where there is the same amount of space on top/ bottom of the clamp. Everything takes twice as long because I’m so ungodly OCD!!!
    What’s your reasoning on this? My paranoid mind wants to know.

    • @sportbiketrackgear
      @sportbiketrackgear  Рік тому

      This clamp is designed to have the upper fastener torqued first. Once this one is torqued you follow with the lower. The upper half will be held flush against the body of the master while there will be a gap between the master body and the cap. - Van

  • @jxparra2
    @jxparra2 7 місяців тому +1

    So I just did the same thing, let it liquid sit before first bleed... Nothing is coming out. Any ideas?

    • @sportbiketrackgear
      @sportbiketrackgear  7 місяців тому

      Watch this video, it should help: ua-cam.com/video/tkxcQzhgJLU/v-deo.html

    • @jxparra2
      @jxparra2 7 місяців тому

      Thank you! It helped greatly !

  • @saadali4674
    @saadali4674 2 роки тому +1

    I am talking from India Bangalore. Nice update and blocks. Create complete blogs. Lots of ricks going on. You put a very nice video to do the engine and bodyline of the super bike!😔😊

  • @sovannarithlay4521
    @sovannarithlay4521 7 років тому +6

    Wow great video.. those eBay levers are a little disappointing tho lol

    • @goldentrucker7921
      @goldentrucker7921 6 років тому

      Sovannarith Lay seriously. she should get an employee discount.

    • @sportbiketrackgear
      @sportbiketrackgear  5 років тому +3

      She had the levers on the bike before she started with us. STG Staff get a kick ass employee discount, better than most motorcycle dealer employee discounts. - Van

    • @sportbiketrackgear
      @sportbiketrackgear  5 років тому +1

      She put the levers on the bike before she started working with us. - Van

  • @Andrew_Eller
    @Andrew_Eller 2 роки тому +1

    When I took off my factory lines I got a little brake fluid on the pads it looks like and I’m wondering if I gotta replace them? Some people said it should be fine or to use some brake cleaner and should be good then. Any input?

    • @sportbiketrackgear
      @sportbiketrackgear  2 роки тому

      Spray them down with brake cleaner and call it good. - Van

  • @mrdirtdart2239
    @mrdirtdart2239 5 років тому +6

    I love watching your videos, but your camera man....dude...he NEEDS to get better angles! You're removing bolts off the caliper and all you can see is the integrated turn signal and your shoulder!!

    • @sportbiketrackgear
      @sportbiketrackgear  5 років тому +5

      This shit is harder than it looks my man. The goal is to provide accurate information with a reasonable level of production. Over the years we have learned a little and changed the format we use for installs. Take a look at a couple of the latest ones. - Van

  • @5635randy
    @5635randy 4 роки тому +1

    I bought the system for the ABS and the Vortex rear set and the Vortex pressure switch once installed bled it like what they say. Brakes work fine until you start the bike once started the pedal is hard as a rock and no brakes. Took it to local Race shop they spent a day nothing told me to take to dealer. Dealer had bike a week got it back $500 out of pocket and I still have no back brake. Can not find any information on how to bleed the ABS pump. Apparently there is a bubble between the cylinder and the ABS pump. Went back to all original same thing did a pressure bleed and a vacuum bleed as well as conventional all with same result. Found most encountered same result and did an ABS delete looking for someone that knows how to bleed ABS pump.

    • @sportbiketrackgear
      @sportbiketrackgear  4 роки тому

      I have installed brake lines on multiple ABS equipped bikes and have not run into any issues bleeding the brakes using the same procedure we have shown. With that said there are no absolutes in life and shit happens. Since you are referring to the "pedal" I assume the issue is with the rear brakes. It is very difficult to diagnose something without having the opportunity to lay hands on it. I would suggest back tracking and double checking all of the work you did and the parts you installed. When you do a job and run into an issue afterwards that was not there previous to starting the work it is almost always caused by the work you just did. - Van

  • @SeanLeonDrumz
    @SeanLeonDrumz 6 років тому +1

    What is that compressor attachment vacuum thing called?

  • @richfjr1300
    @richfjr1300 2 роки тому +1

    did mine today on my honda VFR? my gosh what a job and still not done lol

    • @sportbiketrackgear
      @sportbiketrackgear  2 роки тому

      It will be worth all the work when you are done. This is one of the very best performance mods you can make to your bike. - Van

  • @iSeb51
    @iSeb51 8 років тому +3

    ( sorry for my english, i m french .... )
    "19.30" I have not dreamed, you broke the banjo's thread of the right front caliper ??? ( when you tight it... i m a mechanic, i think you will not say that but a mistake, one time, is human )
    Great video for your race bike by the way ( YZF-R1 )

    • @Honda1k
      @Honda1k 6 років тому

      MySeb51 I think he did.

    • @sportbiketrackgear
      @sportbiketrackgear  5 років тому +3

      The banjo bolt did not break. The banjo bolts and the crush washers are aluminum, when torquing the bolts down there is some friction between the bolt and crush washer. What you see at 19:30 is the grip between them releasing. This happens when the surfaces are both really dry sometimes. If I broke the bolt I would admit it, shit happens to all of us. - Van

  • @Thomasnilsson1989
    @Thomasnilsson1989 8 років тому

    Love your videos, mutch to learn every time,. Would be nice if you could do a video sometime when installing a Jet kit on a bike. Anyway great videos

  • @k9millie1
    @k9millie1 2 роки тому +1

    I have a question I have purchased this from you guys , and I have a question . On my Gxsr600 originally from oem parts my right caliper had two brake lines with the double banjo. But I have seen that this is actually installed at the top by the master cylinder . Leaving only one line on the left and one brake line on the right side . Is that correct .

    • @sportbiketrackgear
      @sportbiketrackgear  2 роки тому +1

      There are a couple of different kits. It sounds like you have the standard double line kit that will have both lines running from the master to the calipers on the right and left. Hope this helps. - Van

    • @k9millie1
      @k9millie1 2 роки тому

      @@sportbiketrackgear yeah saw it on the package was alternative one . It had no instructions and now I don’t know which end goes were but I guess I’ll figure out since I removed the strollers out. Would be nice if they permanently labeled somewhere in the line

  • @zxxkcxxz
    @zxxkcxxz 4 роки тому +1

    the air compressor bleeder tool is not listed on your tools site

    • @sportbiketrackgear
      @sportbiketrackgear  4 роки тому

      www.sportbiketrackgear.com/sbs-brake-system-power-bleeder-kit/ Here is a link to it on our site. - Van

  • @mryamaha2986
    @mryamaha2986 6 років тому +1

    Hi my reae brake catching wen i taken the rear wheel of put it back in now my rear brake is now catching

    • @sportbiketrackgear
      @sportbiketrackgear  6 років тому

      Check the alignment of the rear brake caliper hanger to make sure it is properly installed. If it is not in the slot that can create serious issues. - Van

  • @TreePeople23
    @TreePeople23 8 років тому

    thank you

  • @kdwwms77573
    @kdwwms77573 5 років тому +1

    Thanks for the video. Let’s say if the bag had all fresh fluid from bleeding. Can the fluid be reintroduced back into the master if you ran short of fluid? Of course not in this instance, but I’ve seen videos where all the fluid going into the bag is new. If this is the case, can it be reused? Thanks.

    • @sportbiketrackgear
      @sportbiketrackgear  5 років тому +1

      In theory that would work out, that said these systems have very low capacity so it is best practice just to replace it and not recycle any fluid. Also important to note you should use be opening a NEW bottle of fluid each time you service the brakes to ensure it is moisture free etc... - Van

  • @Nikolay754
    @Nikolay754 7 років тому

    Hello, please write how many cm should there be hoses in front and behind ??????

  • @nickheinz3737
    @nickheinz3737 4 роки тому +1

    Good Video.

  • @josephtorresflores6219
    @josephtorresflores6219 6 років тому +1

    Would you recommend the FREN TUBO CARBON FIBER BRAIDED BRAKE LINE KIT over stainless steel brake lines ?

    • @sportbiketrackgear
      @sportbiketrackgear  6 років тому +1

      No I would stick with the stainless steel braided lines myself. - Van

  • @islamicvideo6725
    @islamicvideo6725 6 років тому

    Find out how many sizes of front brakes please tell

  • @MalinowyWampir
    @MalinowyWampir 3 роки тому +1

    19:30 nice torque wrench, great example of how you just broke the thread lol

    • @sportbiketrackgear
      @sportbiketrackgear  3 роки тому

      Zero need for a torque wrench on these banjo bolts. There was no issue with this and it is still on the road today exactly as it left. - Van

  • @mattylight5051
    @mattylight5051 4 роки тому +1

    How did she get the emblems on the sides of her tank colored? Great customization front to back!

    • @sportbiketrackgear
      @sportbiketrackgear  4 роки тому +1

      Not sure where she got that done but it looks bad ass for sure. She did a great job with that bike. - Van

  • @gstylez909
    @gstylez909 8 років тому

    Can you make a video how to change the stock headers to a aftermarket a 2014 r6 plz&thank you

    • @sportbiketrackgear
      @sportbiketrackgear  8 років тому +1

      This video will show you what you need to see!
      ua-cam.com/video/L8qSUziSqhk/v-deo.html

  • @Tiago-vg2fl
    @Tiago-vg2fl 7 років тому

    the cables are not tied?

  • @tripletrash
    @tripletrash 2 роки тому +1

    Torque specs would be nice.

    • @sportbiketrackgear
      @sportbiketrackgear  2 роки тому

      Each kit comes with a full set of instructions. If you want to use a torque wrench this will contain the specs. - Van

  • @angelodark6144
    @angelodark6144 Рік тому +1

    U didnt torch it? Y not

    • @sportbiketrackgear
      @sportbiketrackgear  Рік тому

      A torch is not a tool I would normally use when installing a brake line kit on a motorcycle. - Van

  • @MrBoomtheroom
    @MrBoomtheroom 5 років тому +1

    any reason u didn't use the factory line holders at the front?

    • @sportbiketrackgear
      @sportbiketrackgear  5 років тому

      The stainless steel lines are much more rigid than OEM rubber lines so the do not require as many mounting points. On some race applications there will not be any mounting points used on the front lines at all. - Van

  • @azmanmarleyarit
    @azmanmarleyarit 8 років тому

    Does the procedure works the same way for bikes with ABS?

    • @sportbiketrackgear
      @sportbiketrackgear  8 років тому

      It sure does! The process with or without ABS should be pretty much the same!

    • @5635randy
      @5635randy 4 роки тому

      @@sportbiketrackgear no its not the ABS system on the R6 has no bleed and once you get air in system there is no way to get it out., You must have done an ABS delete in this build.

  • @jamiekingham895
    @jamiekingham895 2 роки тому +1

    Could of just loosened the master at the beginning

    • @sportbiketrackgear
      @sportbiketrackgear  2 роки тому +1

      Lots of ways to get the job done, this is how I chose to do it. Thanks for watching. - Van

  • @danishpostwala6021
    @danishpostwala6021 6 років тому

    Can I put this on Mine duke 390

  • @rjrobin9409
    @rjrobin9409 2 роки тому +1

    ABS ki

  • @rjrobin9409
    @rjrobin9409 2 роки тому +1

    Vai

  • @MayoungPunte
    @MayoungPunte 6 років тому +1

    Wtf is wrong with camera man

    • @sportbiketrackgear
      @sportbiketrackgear  6 років тому +1

      This is a motorcycle shop not Hollywood my brother. - Van

  • @king_of_636s
    @king_of_636s 3 роки тому +1

    Please fire that camera person and hire me Van.

    • @sportbiketrackgear
      @sportbiketrackgear  3 роки тому +1

      These are harder to shoot than you think. - Van

    • @king_of_636s
      @king_of_636s 3 роки тому

      @@sportbiketrackgear I'm coming to Michigan. Enough said. Put me on payroll.

  • @rjrobin9409
    @rjrobin9409 2 роки тому +1

    Va

  • @americanwriter2533
    @americanwriter2533 5 місяців тому +1

    🤩🇺🇸👍⚖️👁️👁️⚖️👍🇯🇵🏁🏁🏁