For us Americans, some of our old analog and hybrid bells sound with a quick pace, as more often than not, we’re familiar with fast bells. Cheers from America, mate!
6:15 (this part is correct I'm assume) the bell shat itself while the crossing was still working. Information below this is incorrect besides the edit of this comment Not actually a failure. Crossings can be programmed to have the bell ring and then have the bell shut off after the gate is down and not come back on And I think the Pedestrian Alarm is always on. That particular one looks to be an export and rebuild of an older American Crossing Edit:I know nothing on Australian Railroad crossings btw I'm assuming most are exported American crossings
I've filmed the crossing before, and on other activations the bell stayed on the whole time, it just gave up that time, so it failed. Vic crossings work different then American crossings
I am disappointed that so many new Safetran Type 3s are already failing in Australia. I haven't seen much video of American ones so I don't know if they have the same problem over here. I do know that the General Signals type 1s on crossings near me are still healthy, so I guess the Australian weather took a toll on them. I've seen quite a few American crossings intentionally go completely silent once the gates have lowered, but all the Australian ones I have seen do so due to faulty bells.
Siemens/Safetran Type 3's can last anywhere between 2 weeks and still alive, some factors include how the crossing is wired, there's one crossing in Lara, Victoria which has killed over 10 ST3's in the last few years, this signal probably has some sort of wiring fault that needs to be addressed. The most faulty part of an ST3 is the speaker, so it's a mix of a whole lot of things. Another reason there is so many faulty clips of them here is because Australia is chockers full of them, its like some area's of America with NEG's but worse. Funnily enough, the first GS1's to be installed in Australia are the last GS1's to exist on a crossing lol! GS1's are built quite well, they have outlasted a lot of GS2's here.
Majority of australia's lights are made by Westinghouse which is an australian company and they only made 8in lights. South Australia has some 12in lights.
@@RblxRailfan2025 my brother wants me to work on his other games on Roblox so ima do that and my says for about 1-2 hours I want to make railroad crossing stuff 😫
@@TazzieTransport for example: if you watch a video from owsneeri2 (idk how to say his name) you look at this video made by him and the bell on that video is like the worst bell you will ever hear
@@zonic26 yep - I see that error a lot, and the use of "too" when it should be "to"... as in "going too visit my friend"... which should be "going to visit my friend".
5:12 HEY LOOK! ITS THE AUSTRALIEN AMTRAK!
Lol, the train was made based of the HST
@ZackDoesRoblox fake unspeakable
3:25 air horn 😂 train zooms by
5:33 bells trying to turn on
Bro are we both roblox UA-camrs
For us Americans, some of our old analog and hybrid bells sound with a quick pace, as more often than not, we’re familiar with fast bells. Cheers from America, mate!
4:43 sounds like someone banging a plate with a spoon!
For the 8:17 one, I find the pitch pretty cool
0:00 & 0:22 USA Type Bell
On 13:52 it sounds like ireland.
when crossings get bored
lol
Underrated comment
@@Fa_UTGreal
@@rebekahbishop7396 how dare you deny me mortal 😀 furthermore I shall
Proceed To punish you with my gigantic steel wheels
@@Fa_UTG OK now you’ve done it
7:02 most American safetran hybrid bells do that
I like fast hybrids 11:09 Greatings! A fan from USA, Michigan
7:33 the menace x'trapolis blocking your shot
It Happens, At Least I got the front of the Tait
@@TazzieTransport that's what mostly matters though
Time to sue PTV
11:48 sounds really nice
5:33 That dying gs type 1 sounds scary
I find it entertaining to hear so many different sounds from these bells. It always leaves me thinking, 'What sound will it make next?'.
6:52 why the crossing sounds like czech
same kind of noise it makes but different companies
6:17 did that bell work for next activeation ?
Yea, but turned off randomly again the one after
0:06 I like how on the left railway crossing is one side LED and Incandescent bulbs on the other side
1:44 lol there’s a UK e bell there.
9:14 it sounds like gs type 1 but lower pitched
5:05 i like the sound of that horn, whats it called?
8:20 christmas bells
2:11 sounded like a freight train
13:14 seems like it's flat too
7:30 the top train signal crossing lights aren't synced to the ones closer to the ground is that normal?
yep, running of multiple relays
Most Victorian crossings do that. Look at Forest street Wendouree, those are shocking
9:17 those are actually a gs type 1.5 (pitch between type 1&2) and gs type 2.5 (pitch between 2&3)
Why did the trains at the randomly failing hybrid part have two different trains??
The general Singals type 2 & 3 had been cursed in some crossings in Australia by magic with Harry Potter
At 5:26, that failing gs1 should be replaced with a gs3 or safetran type 3
Funny story, it got replaced with a GS3 and my mate got a hold of it, I bought it off him so it’s mine now lol
I once heard the gs1 turn on then off and back on when the gates were down
@@tomhenry6440 oh lol
It just went "Ding diding dingdingdingdingdingding".
3:42 look on the right do you see the difference *THEY HAD 1 JOB XD*
13:56 that bell can't ring
2:07 sounded strange
At 7:03 it should be "After not working for the first 10 seconds it starts working randomly out of NOWHERE" "knowhere" is not a word
no one cares bro shut up
@@mr.cheese.balls100s mediamaker does, see his comment mentioning one of the other grammar mistakes
@@zonic26 like two people bro it dosen't change the video quality?
@@mr.cheese.balls100s If you don't care then why don't you just shut your mouth?
@@zonic26 because you noobs are spotting tiny errors that NO ONE notices
Seimens sounds like a dieng duck. General signal is the best. Q: Why the wimpy toot-toot even on the fast trains?
Interesting video Tazzie! Very nice nonetheless!
11:48 sounds so ominous for some reason
So in the whacky gs1 actually it was a asc e bell
9:17 do u mean *midland* highway
Question, can this noise be blocked by double glazed windows at buildings right next to them ?
The GS3 sounds like WHC
Video link for slow hybrid?
those gs3 sound a bit like a wch E bell
Need a little guitar (it sounds like Mississippi Queen) 16:27
I like your videos
Jacob said that you have to go to bed 😂😂😂😢😅😂😂
Aes
6:15 (this part is correct I'm assume) the bell shat itself while the crossing was still working.
Information below this is incorrect besides the edit of this comment
Not actually a failure.
Crossings can be programmed to have the bell ring and then have the bell shut off after the gate is down and not come back on
And I think the Pedestrian Alarm is always on.
That particular one looks to be an export and rebuild of an older American Crossing
Edit:I know nothing on Australian Railroad crossings btw I'm assuming most are exported American crossings
I've filmed the crossing before, and on other activations the bell stayed on the whole time, it just gave up that time, so it failed. Vic crossings work different then American crossings
I am disappointed that so many new Safetran Type 3s are already failing in Australia. I haven't seen much video of American ones so I don't know if they have the same problem over here. I do know that the General Signals type 1s on crossings near me are still healthy, so I guess the Australian weather took a toll on them.
I've seen quite a few American crossings intentionally go completely silent once the gates have lowered, but all the Australian ones I have seen do so due to faulty bells.
Siemens/Safetran Type 3's can last anywhere between 2 weeks and still alive, some factors include how the crossing is wired, there's one crossing in Lara, Victoria which has killed over 10 ST3's in the last few years, this signal probably has some sort of wiring fault that needs to be addressed. The most faulty part of an ST3 is the speaker, so it's a mix of a whole lot of things.
Another reason there is so many faulty clips of them here is because Australia is chockers full of them, its like some area's of America with NEG's but worse.
Funnily enough, the first GS1's to be installed in Australia are the last GS1's to exist on a crossing lol! GS1's are built quite well, they have outlasted a lot of GS2's here.
oooooooo a BNSF FAKE BONNET GE ES44AC
This railroad crossing shut down is funny hahaha🤣14:35
When did you film the xpt?
April 2021
why does Australia only have 8 inch lights?
Majority of australia's lights are made by Westinghouse which is an australian company and they only made 8in lights. South Australia has some 12in lights.
WA to, QLD is full of them and MSW has 1 crossing with them.
Cool video.
By the way, your description has 19:14 instead of 9:14.
Another day you will record the pedestrian signal with the st3
Great video ! :)
Nice scratchy GS3
The GS type 3s sound like a WCH E-bell
The first one sounds like a GS prototype
Nice video mate
These hurt my brain in different ways than the working ones i heard inside.
wish i got into this stuff sooner before the level crossing removal project :(
Same, missed the first 35 removals :(
@@TazzieTransport 😔😔😔😔
My favourite 8:17
11:47 y can u wat en d midl
Why can you wait in the middle
Did you see that Toyota supra
Supra kid
Cool video!
Great video
4:43 - 5:23 Cool gong of wch bell
Hello I’ve seen you everywhere
@@Fa_UTGoh hi
@@RblxRailfan2025 my brother wants me to work on his other games on Roblox so ima do that and my says for about 1-2 hours I want to make railroad crossing stuff 😫
@@Fa_UTG yikes
@@RblxRailfan2025 one done early do you wanna play a game or something?
The 2nd level crossing bells sounds like a duck 🦆 🐤🐥🐣🐤
Lol fr
Typo: TS1, for the dying GS1 that has been replaced.
Oops!
It’s ok! I spotted that after like a week
For some reason fast hybrids sound better
11:47
The Scratchy ST3 Sounds Like Frog The Other Side Is Good
Some bells here in the USA sound even worse compared to these
Yep, The us has a few horrid ones lol
@@TazzieTransport for example: if you watch a video from owsneeri2 (idk how to say his name) you look at this video made by him and the bell on that video is like the worst bell you will ever hear
@@Henrythe775 yea that bell ugh I don’t want even to send the link find it yourslef
👍👍👍👍
When crossing get tired:
😂😂😂😂😂😂😂😂😂
@@RblxRailfan2025 I think some I’ve seen you on these Australian crossing videos we should make a game and you can railfan there!
@@Fa_UTG Maybe
TEMP 10:52
The first one and the third ones bell sounds fine to me but I guess not to you
Hi! 17:57
I mean GS1
Second one sounds like a duck
some of them do appear out of sync
"Less THAN"... not "then"...
Another typo I noticed at 7:03 says "After not working for the first 10 seconds it starts working randomly out of knowhere" which should be NOWHERE
@@zonic26 yep - I see that error a lot, and the use of "too" when it should be "to"... as in "going too visit my friend"... which should be "going to visit my friend".
@@mediamaker Yeah the use of "too" instead of "to" is the error I see the most
bro none of you could do any better lol, it makes no difference.
@@mr.cheese.balls100s we definitely could do better...
kensi
its faulty cus its australia duh
LOL
You certainly don't understand how level crossing gates work and there in-built safety systems.
UwU
Wah palang nya jelek nggak bagus jelek ini negara nya